Error-Windows won't load disc playback

Similar Questions

• 0xC0000221 error windows didn't load a critical system driver is missing or corrupt.

  Hey, I got a letter on my laptop to install service pack 2 for windows vista and I did it with no complications until I reset my laptop and when it came back I received an error:

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer."

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\System32\drivers\ecache.sys
  Status: 0xc0000221
  Info: Windows could not load a critical system driver is missing or corrupt.

  I followed these instructions several times and made repairs to start ending telling me that "Windows cannot repair this problem automatically" and "If you recently set a device to this computer, like a camera or portable music player, remove it and then restart your computer." I have nothing connected to the computer.

  I also tried to restore the system that is not no matter how far back that I try to restore to.

  Take your laptop computer to a local computer repair shop, reputable and independent.

• Windows XP Service Pack 3 error "Windows has no load installer for hdc.

  service pack 3 Windows could not load the installer for hdc

  having problems installing SP3, error message "windows has no load installer for hdc.

  Hi Doug,.

  See the following article to find out how to install Windows XP Service Pack 3.

  Steps to take before you install Windows XP Service Pack 3

  See also:

  How to troubleshoot an installation fails on Windows XP Service Pack 3

• Error "Windows failed to load, status: 0xc000014c" when starting.

  Original title: help Edition Vista Home basic 32

  my pc has stopped working it is an acer aspire m1610, all I get is file: / windows/system32/config/system status: 0xc000014c windows failed to load because the system registry file is missing or damaged.    I tried to use my disc drivers and restore dvd does not...

  You have the Vista DVD?

• Windows Vista won't load disc

  Windows Vista 64 bit frozen and would not.  After reading the book has decided that I should restore disk factory.  Press F12 by following the instructions (I did all the retore point Jules Destrooper, no go).  After hitting F12 it says press F1, set thinking it would reformat the disk drive.  Instead it loaded Vista and it works.  Now, whenever I start the computer it shows the line F1 and I have to insert the disc to load.  What happened.

  Hello

  ·         Which version of Windows Vista you are using?

  ·         What is the brand and model of the computer?

  Regarding the recovery DVDs that you get F1 option before you start, you can try to contact your OEM (manufacturer, i.e.) for assistance.

  I hope this helps.

• Using system recovery discs and now windows won't load.

  My computer crashed and I tried everything to get it running and backup. My desktop computer does start all the way to the top.

  The HP page will load, so I can use the f keys. When I run the diagnostic tools (f9) it test all memory, cpu, hardware ect and says it's fine.

  I reloaded Windows Vista off my system recovery disks, I did once I bought the computer. I had to do it every six months or more. Several times in recent weeks.

  It then goes to the windows error recovery page if I select one of the options, it is empty. It never makes it to the login page.

  HP Pavilion Elite m9252p

  Thank you

  There is no limit on the number of times you can use the recovery disks.  You must contact the manufacturer about the recovery process, as it is them and not Microsoft.  Each manufacturer does things differently and we don't have access to this information.

  In regard to the upgrade to Windows7, you must upgrade work install Vista system if it does not you will need to purchase a full retail copy of Windows7 and do a cleaning.  The problem is that you don't know if Windows7 is compatible with your system - and once you open the package the seller will probably accept returns.  It ' was a great risk to do this withour executes the first Windows7 Compatibiity advise http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx but if you have no access to your system you can't run it.  You can get in your system somehow?  Have you tried safe mode with networking (repeatedly press F8 during the boot process until the menu appears)?  If you can somehow get, run this check before considering the upgrade to Windows7.  You can also ask the manufacturer if your system is compatible with Window7 but they may or may not provide a correct answer.  The decision and the risk is all yours.

  The short answer is that you need to discuss this problem with the manufacturer and follow their advice.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows won't load do not - cannot start the laptop

  HI - My Mum 6510 b Compaq HP does not load windows.

  As soon as I turn on the machine, I get error System32 appears.

  I tried to boot from the BIOS - with some borrowed XP discs (these were not the original disks). Windows still load and and took me to the System32 error.

  She did no "recovery disc" - is there anyway I can return Windows.

  There is no data on the hard drive that needs to be recovered - she only had the machine (refurbished) a few months.

  Thus, any suggestion would be great.

  Thank you very much

  Francis

  Set recovery disc can be ordered here. Make sure order you the right.

  Best regards
  ERICO

• Satellite A660 - Windows won't load - I can't get back

  I have a Toshiba Satellite A660 7U.
  Last night it could not start.

  I ran the Norton ghost boot cd and save most of the things that I needed.
  I also noticed player C has become just 1.5gig and there was an extra drive!

  I tried to run the system restore by using startup Toshibas restore factory settings. first of all it does not have enough space in drive C, and then when I changed the settings to delete all partitions, he was preparing for a long time the copy as long (10 min) time and then turned itself off.

  Now what should I do? My HARD drive has disappeared?
  I see all my stuff when I use Norton ghost however. I copied most of the things in the drive (D) possibility of a virus?

  William

  Hello

  I think that Akuma is right.
  The Ghost has copied all the files (backup) image on the C partition and as a result there is no more free space on this partition.

  I m wondering if you have created a Toshiba Recovery disk. Did you?
  If you didn t create the recovery disk and if the disk HARD recovery option doesn't work, then you must order a new recovery disk to put the laptop back to factory settings.

  Of course, it is an additional option if the procedure of restoring ghost image would not work.

• OS is crashed-tried restore out-of-partition error message of disk-not during this process, now windows will not load

  Vista crashed.  I don't have a recovery disk and attempt to restore the hard disk, which seemed successful, but windows won't load in any mode.  The last loaded disc is disc CRC system, then it hangs for a minute, then I get the message Windows is started in an unexpected way or met an enexpected error... restart to complete the installation.

  Any help?

  Hi Mike,.

  This is an Acerdocument to help you reinstall Windows Vista from the recovery hard disk partition. Through their website, if you are unable to reinstall from the partition, you will need to recover using a disc.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

• Windows does not load after Windows update on January 8, 2010

  Basically, I've updated windows last night and is gone to bed and after I myself woke up and turned on the computer, windows won't load.

  There was an option to repair, but he says "Startup Repair cannot repair this computer automatically.

  So I ran the hardware test and everything was fine.  I tried to do a system restore... but it is come to the same, exact screen stating that «Startup Repair cannot...» ». I tried to run in safe mode and exactly the same result.

  I don't want to try to restore the computer to factory settings and lose everything I have.

  Help, please!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include Error Codes, as appropriate, and exactly what happened when you did the update last night.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the worst happens, follow these steps below for data recovery before reinstallling:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• My C Satellite won't load Windows - error code 0xcoooooe9

  Hello

  get a status error happen when the laptop is turned on. The error code is 0xcoooooe9, windows does not load upward and the tool does not work.

  Trying to get back to factory settings, but it crashed saying the partition cannot be created and was only an option to turn off the laptop.

  Was purchased at the ebay store of argos less than 12 months ago and should be still under warranty but does not know if it's here.

  Any help please?

  Post edited by: MasterG

  On this virtual path, it is not easy to say what is the problem, but maybe the HARD drive make problems.
  I recommend you contact the nearest Toshiba service provider and ask for help. They can check it out.

  At first clarify the guarantee and I hope they will fix it for free.
  Phone numbers and addresses, that you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

• Began is registry and Windows XP error message not be loading not: trying to reinstall XP but error Reg stops the process

  I have a home built computer works very well with Windows XP for about two years, but has recently started having a blue error screen registry which stops at Windows XP to load.

  In part, the following text is displayed:
  Registry error
  Technical information:
  STOP: 0 X 00000051 (0X00000001, 0XE112E8C8, 0X005D4000)

  I can get to the BIOS screen and things are defined as usual as I can tell.  I can get it to the advanced screen by pressing F8 but no matter what I click on, such that start in "Safe Mode" or "last known good configuration" always ends up to the blue screen with registry error.

  I have the Windows XP disc and can pass it through all the preloading stuff, but when you get to the screen to choose the repair or start the new installation, no matter what I choose, it always comes back to the blue screen and error in registry.  Is there a way to correct the registry error so I can get Windows XP to load - from the disc or other?  If the registry error cannot be corrected, wiping my drive hard clean help?  If so, how do I?

  Grasping at straws, on the off-chance that your video driver is at fault here, on the Hirens boot disk, you can go to
  Programs-> Editors / viewers-> Notepad ++
  to start a text editor.  Once opened, go to file-> open and open the "Boot.ini" file located in the root directory of your boot drive.  "Find the line under" [Operating Systems] and add the switches "/ basevideo/SOS" (without the quotes) at the end of the line.  Save the file (file-> save) and try restarting your machine.  These switches should force your machine to boot standard 640 x 480 VGA video independent of any driver you have loaded.  If your computer starts, you need to reinstall the video driver for what video card you have (visit the website of your computer manufacturer).  If you do this, then you will need to re - edit the file in the way he had, it will start normally.

  More information about the Boot.ini file is here:
  "Switch options available for Windows XP and Windows Server 2003 Boot.ini files"
    <>http://support.Microsoft.com/kb/833721 >

  If all goes well, if nothing else, the /SOS switch displays driver that has been modified to load before the crash.

  My only suggestion is to use Hirens to back up your data before reinstalling Windows.

  HTH,
  JW

• Windows does not load because registry files system is missing or damaged. error code: 0-xC0000001

  My computer laptop lenovo has a problem. I am not able to start windows. So, I asked for Lenovo recovery DVDs. Now, when I tried to boot from this system recovery DVD, I get the following error after loading the file screen. Please help ASAP!

  Window Boot Manager
  =====================
  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc anf resart your computer.
  2. choose your language settings, and click Next
  3. click on the your computer Lair

  If you have not this contact your system administrator or computer manufacturer

  File: \windows\system32\config\system

  Status: 0 xC0000001

  Info: Windows failed to load because the registry files system is missing or damaged.

  Hi Walter, thanks for the quick response.

  Message system ther said however to fix it with the windows installation disc.

  So I'll be able to get a copy of the cd to the Microsoft Vista operating system? I can try with that and I hope that he can solve the problem.

  Hey Santosh Panda

  I'm sorry, but microsoft does not include disks of vista for the oem brand computers

  your manufacturer already provided you the means to reinstall vista

  There must be a reason why your "Reinstall vista" drive recovery lenove does not work

  and we cannot help you with that

  Lenovo can

  Walter, the time zone traveller

• Message says: "Windows could not load correctly" then he got the error: "0xa0000001.

  So I recently got these computer errors on my laptop. The pixels on the screen start to panic and it still restarts my computer.

  The first time, he started was when I was playing a game called League of Legends and it worked perfectly fine on my laptop, and he had always run around 70 fps. I played this game for a long time. Then, in the middle of an online game the screen flipped out and restarted my PC! He sent me a message saying: "your PC has encountered a problem :(. "

  After it restarts my laptop and then after restarting the pixels on the screen start to panic again and it restarted. After that restart again once he sent me a message saying he will "fix the problem on my PC. I clicked on 'Repair' and then it restarted again. After the restart he freaked out again and then it restarted and it gave me a message saying "your PC will convert at an early stage when it doesn't have this problem. This can remove files that have been installed recently. So, I allowed it do and after 3 hours of waiting he brought me to an earlier stage if my laptop was not the problem. He only come back in a few hours. Then the next day, I decided to try again in League of Legends, it was working fine and it launched the game. I was running on my normal fps then he started trolling and it fell to 12 frames per second and the screen flipped out again and then my computer restarted. Once restarted, it it worked fine after 5 minutes it restarted again, and then he gave me a message saying: "Windows could not load correctly" then he said I got the error: "0xa0000001. I turned on my PC and my screen has panic when he started, and then it restarted again give the same message and tell you have the error: 'DRIVER_OVERRAN_STACK_BUFFER '. It came on again and it was worse still panic then it restarted and it gave me the same message saying that you have the error: "BAD_POOL_HEADER". It restarts and several times with lit the screen always freak out so I decided to just remove the plug and ask for help. I went on the computer of my brother and sought a solution for these errors. Turns out Im not the only one to these errors. They say that '0xa0000001' error is caused primarily by an AMD graphics card and my graphics card is an AMD graphics card. The solution for this error is to uninstall the graphics card and reinstall it directly from the manufacturer's website. I could have made this solution and corrected my graphics card, but there is a problem. Whenever I turn on my laptop the pixels panic and sometimes the screen turns black and then it restarts. I can't access anything whatsoever, and he keeps just restarting. Please help me and tell me how to fix my phone :( I really need a solution to this problem.

  Please answer quickly :(

  Thank you

  There is an old saying that if it ain't broke, don't fix it.

  It works again.

  Read this information

  You need to get the Driver of your laptop computer software or a hardware manufacturer, not through Windows Update (with the exception of Microsoft put updated material), as Microsoft normally does nor those have the most recent drivers available as Microsoft leverages the hardware manufacturer 3rd party to provide them.

  Go to the website for your laptop or manufacturing equipment > Driver and Software Support Section > search your laptop or material style number > then your operating system > locate the correct drivers > download and install.

  ______________________________________________________

  But this is no guarantee that this won't happen again.

  Also, it would be that the game hardware requirements are higher than supports the hardware in your laptop.

  It could also be due to lack of graphic material.

  All you can do is search for the latest drivers and play games that require only a material that has your Lapyop.

  See you soon.