Disclose the facet of af detailStamp: table one at a time

Similar Questions

• Question about the control of two handles, or one at a time

  I use a trial version of Photoshop CS5 on Windows 7. I know how to select an anchor or its handles. But I don't know why sometimes I am controlling so many an anchor handles when I move one of them, or when I'm alone movement at the same time.

  
  

  My question is: how to make sure I have move the two handles at the same time or how to make sure I'm moving only one at a time?

  Use the convert anchor point.  This tool will get you used to convert the front handles and back to what you need.

  

• I bought a bunch of vector images (doing different things of the mascot), how can I separate the images so I can use one at a time?

  I'm new to Illustrator.  When I select an image to move, all 6 of the mascot images move together.  They are on a transparent background, but I only want to use a single image at a time.

  Selection in Illustrator works differently than in Photoshop.

  You usually select stuff by clicking on the artboard.

  If it is a group, then object > ungroup. You may need to do more than once.

  Also: in the layers panel, if there is a triangle in front of a group or object, you can consider the issue to analyze.

• You can remove all the highlights at once instead of one at a time in a PDF document?

  I have 12 PDF each of which is 300 to 600 pages where someone has highlighted large parts of gree, blue and yellow. I want to keep all yellow highlights and remove all green and blue. Is it possible to do without having to remove the strong points of each page? Any help is greatly appreciated!

  Kevin

  This could help you. You will have to do this on a per-document tho basis but should work.

  Click on the comments tab at the bottom left of the page. Choose display choose by type and choose annotations to text editing. Sort and choose the color. This niche all green, red etc inside a comment with an expandable + nest for her. Now, just click the Green and press from the trash, repeat for blue. Hope that helps?

• How to read data from a worksheet to a chart in the form of wave at intervals to simulate real-time data

  Hi I have measured data using a SELF-DIAGNOSIS device and that you have downloaded the log files as a .csv I have attatched below.  I'm trying to read the 7th column of data (RPM) and display it on a waveform graph, read line-by-line to simulate driving real-time data. The interval between readings, I'm trying to achieve is 500 Ms because it is the time interval of readings on the worksheet. I'm finishing the two loops when rpm is equal to zero, as happens when the car is off. I have attatched the relevant section of my program below. Any suggestions would be greatly appreciated.

  Thank you

  Michael

  There are two errors in your block diagram.  First of all, as you read the entire table 2D in all at once (which is fine), you make a clumsy (pardon my language) job to make a line of programming.  Once you take the first line of headers, you have the ideal substrate for a loop, which is made of elements of an array (lines) process, one at a time, using its tunnel of indexation.

  The second mistake is to forget data flow.  The loop, I mentioned, or the While loop you use, produced one at a time and points it at 2 Hz thanks to your expectation of 500msec.  You want to give each point to your chart, but the picture is out of the loop, which means that there is No point until the loop ends.

  Here's an easy Question - where you put the indicators in table of waveform?  [Council - I said that "outside the loop is bad"].

  Bob Schor

• Can u put the Apple Watch mode bedside table without getting the dock?

  I Haz one question I am about to get a Apple Watch for my birthday

  question, version 1

  can u put the Apple Watch mode bedside table with the original charger, or get the dock from Apple?

  Hello

  Yes - you can put Apple Watch mode table bedside without having to buy the Apple (or other) docking station.

  To place your watch mode bedside table:

  • Make sure the option is turned on: on your iPhone, in the application of the watch, go to My Watch (tab) > General > scroll mode bedside table.
  • Connect your watch to its charger (with power connected):
    • Place your watch on the side with the buttons facing up.
  • To see the time, tap the screen or slightly shift your watch:
    • By design, when the watch is in this mode, pushing even your bedside table may be sufficient.
  • If you also set an alarm with the alarm clock app on your watch, it will warn you at the specified time.

  More information:

  Use the mode table bedside on your Apple Watch - Apple Support

• Set the scale of thermocouple at table for a channel in the task

  I create a task that contains 9 measures voltage and 10 by thermocouple programmatically. All the thermocouples are of Type T. I just want to read one of the thermocouples up to the limit of 30 k. NOR for the Type T is 73 K.

  I understand that the lira below their limit thermocouples OR is to change the scale type to table using a property DAQmx Channel node. However, because I take different types of measures, I need to isolate the channel particularly thermocouple. If I move the entire task to the node property DAQmx channel and try to set the scale of the type of thermocouple to table, I get an error because the voltage channels do not support this property. I can't understand how to get individually on channels of the task. I don't want to separate the measures into two tasks, because then I have to do to synchronize the clocks of additional programming.

  I have more than one idea: use a DAQmx create task VI at the beginning. Do a global virtual channel to MAX for the thermocouple that I want to change the type of ladder for. Place a constant for this virtual channel and run through the DAQmx Channel property. Use the task of creating DAQmx to create a task containing this global virtual channel. Pass this task to a bunch of DAQmx create Virtual Channel screws to add other measures to the task.

  This makes a lot of the scalability of my program and seems to be the wrong shape in general. Looks like there should be an easier way to do it. Any ideas? Thank you!

  Hello

  Try to use the property node of channel Active channels (ActiveChans) that is by specifying the string "isolated" as its input, and then adding the (HAVE. Themcpl.ScaleType) in developing the property node even by setting its entry. The property node Active channels specifies a list of virtual to change channels or virtual channel. Virtual channels are in a specific job. NOR-DAQmx configure all channels in the task if you do not set this property

  Best regards

  M Ali

  Technical sales engineer

  National Instruments

• Best way to update the individual rows of a Table?

  I took a quick glance at a few examples, but did not get a clarification on this.  I am looking to have something close to a listbox control or the table to where I can update just one column of values to line a 1 time per second pace.  I'm looking to display our acquisition of data values in a table or a listbox control.  The single list box seemed to work well for that, but I couldn't use the row headers to list the names of channel beside the channel values.  I thought to link the values of cursor in two areas of list to do this, but did not find any info on it for the single list box.

  I have a few questions:

  (1) I have a 1 d table to where I want to use this data to constantly update the first column (with a multitude of lines) of a table.  I'm looking for the best route to not take too much time for treatment by doing this.

  What is the best way to update the individual rows of a table?   Invoke the node "Value of the cell value"... or is there another method?

  (2) why is that, after each iteration else, row values are deleted?

  Also, for adding additional channels originally arrray... it is better to use the 'Array' subset then the function "Construct the table" or function "Subset of the table" and "insert table"?

  See the attached example.

  Thank you.

  Jeff· Þ· Bohrer says:

  (2) why is that, after each iteration else, row values are deleted?

  Classic race condition.  dump the loop and node-p and just wire the 2D table on the terminal Board. !

  I don't see the race condition.  What I see is the table once the last element has been written for it all run the oil.  I saw looked it with point culminating performance on.

  But I agree entirely with writing to the Terminal.  It is a 1 d array, so you will need to use an array of generation and convert a 2D array in order so that he could write correctly.

• 2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use. I rebooted, but it stopped again.

  2-3 days after the expiry of my warranty of one year, my computer turns off suddenly during use.  I rebooted, but it stopped again.

  The model is that the computer runs for 15-30 minutes, then suddenly stops, the system reboots, runs for 2-3 minutes, stops, restarts, spans less than a minute, stops, restarts, stop after a few seconds, etc., and at that time there I give until the next day when I repeat the same cycle all over.    I have Windows Vista Home Premium 32 bit and it is a model of Dell Inspiron 518.  There is no error message but a beep at startup upward.  I ran Windows repair program 'Start' who did a restore without success.  The problem occurs even in Safe Mode.

  Does anyone have a guess as to what is the diagnosis?  Thank you.

  Hello

  Could be hardware or even heat and ventilation the related. Try using a small fan to increase ventilation. When a PC
  Remove ALL power and reinstall the memory, all cards and cables (do just not shake - remove and replace-)
  cables on both ends where possible).

  As it does in Mode safe so you probably need technical support in a real store of the computer - no Peeks/leeks at BestBuy or other large shopping areas. Very difficult to solve if it does not remain under tension.
  It remains under tension if you start from the disc of Vista?

  -----------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on these reboots.

  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How do I get the separate elements of a table in a bean method?

  Hey everyone, how are you?

  I use Jdeveloper 12.1.2.0.0.

  I have a bean method that gets the items on a table-adf and I need the separate elements (of a given attribute) this table to highlight in the other table.

  For example: my table elements:

  ID name Tecnolgy

  1 oracle ADF

  2 oracle Jdeveloper

  3 Microsoft Visual Studio

  And I need the separate names in this table:

  Oracle; Microsoft

  So I highlighted them in another table.

  Normally I use an iterator and I will one by one and highlight what I want (as you can see, with a large table it can take a long time) and I wanted only to get the separate elements.

  My method of beans as something like this:

  DCIteratorBinding conIter = ADFUtils.findIterator ("VFactSalesNewView1Iterator");

  Line r [] = new Row [conIter.getAllRowsInRange () .length];

  r = conIter.getAllRowsInRange ();

  for (int i = 0; i < conIter.getAllRowsInRange () .length; i ++)

  {

  long productsInt = (Long) r [i] .getAttribute ("FkProduct");

  ...

  matchEmFactSalesProducts (r [i]);

  ..

  }

  I was wondering if it was possible to put a query and return the items in the request as lines (as I do with the iterator) or another possibility here.

  The request for my first table (the one in the example) is the following:

  SELECT VFactSalesNew.N_SALES,

  VFactSalesNew.QUANTITY,

  VFactSalesNew.ID_ANO,

  VFactSalesNew.QUARTER

  OF V_FACT_SALES_NEW VFactSalesNew

  WHERE

  ((nvl(:var_dimCoin,'0') = '0' OR FK_COIN IN (select * from THE (select cast (in_list(:var_dimCoin) as mytableType) double) a)))

  and the table I emphasize only has a select * from tableX;

  Any ideas?

  Kind regards

  Frederico.

  Hi Frederico,

  Hope you are well. Your VFactSalesNew table is filtered by any chance? Approach, you could do is to try to create a new VO with the following query:

  SELECT DISTINCT (yourTable.NAME)

  From yourTable

  But if your table is filtered, then I recommend you create a method in your implementation ViewObject that returns a LIST and there you iterate over the result set. In all cases, you will need to browse the whole list to get distinct values.

  Concerning

• I can't get the page numbers in my table of contents to update when I update the book.

  
  I use Framemaker 11 and I have two tables of contents in my book: one in English and French. Each table of contents to links to various documents in the same book. The reference page for each table of contents is defined and properly displays the positions 1 and 2, I said that it appears, but numbers not updated when the contents of my document files change to another page. I checked the settings of conditional text in my document files; they are correct. When I update the book, I choose to update the numbers, all the cross-references, all text inserts, OLE links, generate a Table of contents, lists, and indexes. What I am doing wrong? Thank you.

  If they are not knocked down, then they are certainly not generated files. See the example in the help of FM11: http://help.adobe.com/en_US/FrameMaker/11.0/Using/images/bk_hier_books.png

  The 'K' is a TOC file that FM recognizes a generated file.

  Because you have created your table of the contents of the French with the help of another structure of the book, you could import reference this TOC file in another file of FM (for example to create an inset text) in the main book you want. However, you need to make updates in two steps. First update the French book to revise the table of contents. Then update the main book to get the rest of the correct pages (and given that the table of french contents are imported by reference, FM always uses the most recent version).

• Get all the current statements for a table

  Hi all
  
  I would like to know if its possible to retrieve all select, insert, delete, instructions update for a table at a given time or for a period of approximately 10 seconds.
  
  as something like that
  
  Select username, ORDER MACHINE, SQL_ID, SQL_EXEC_START session $ v where sql_id in)
  Select sql_id in v$ sql where sql_text like '% MYTABLENAME %');
  
  I know there are several requests for this table, but with this query, I see only my own queries!
  Why?

  Perhaps the best way is using audit or FGA. If you are looking for in the library cache, older statements do not exist. Depends or you install Grid Control/DB Console can help too but if you have the default values you have only one month.

  HTH
  Antonio NAVARRO

• Property JavaScript to tell if the text is in a table continues

  Hello

  Is it possible to determine if the text in a textframe is in a table, even if this table has been threaded through to multiple text frames? I can check the number of tables for the text block when the table starts to see if there is a table and then work from there for this image. However, the following text blocks have a tables.length of 0. Selected individual within the table, when characters, have a parent cell, but in my case, I need to be able to check the first character of the frame and move forward according to whether this cell is in a table. For reasons that are not clear to me, this character is never the child of the cell. And, if I pull the following characters from the (say) characters collection, I only get the characters that appear after the table (line source or legend). Obviously, I'm missing something about how the table is referenced in the DOM, but I can't understand what it is.

  What I want:

  -A textFrame, determine if it begins with a table (so check first character textFrame for "table-ness")

  What I mean

  -The table itself seems invisible to the textFrame object.

  I hope that this issue is sufficiently clear. I'm having a little bit of hurt to express the problem. Thank you!

  Hello

  The short answer is, you're out of luck.

  The longer answer is, there is almost no way of knowing what page one

  character of a table is enabled, if this table can extend over several

  pages.

  The same goes for notes that spans 2 or more pages. There are

  virtually no way to know what the page any character in the

  reference is on in this case.

  I say no way because I think remember me that some thing involving anchored

  objects, through which you insert an object anchored after a given character,

  then release it and then check what page he falls toward the top on.

  How a table is like this:

  A table lives inside a single character (which does not mean that the)

  parent of a table is a character - go figure!). You can get your hands on the

  PointInsertion before this character with myTable.storyOffset. I don't care

  How long the table is 1000 pages or more - he still lives inside

  This unique character.

  So when a table spans several blocks of text, then, indeed, you will

  notes that the number of table to text all frames except the

  first is zero. Indeed, if there's nothing in there but the pursuit

  a table, you will find that the number of characters and PointInsertion

  counter is at zero. This is a limitation of the InDesign scripting

  DOM. InDesign itself is perfectly aware that the block of text is not empty

  in such a case, but questioning you via script gets the wrong answer.

  A table contains cells. In other words, the parent of a cell is a painting, not a

  block of text. So let's say you have selected the text inside the 500th cell in

  your table, on the 10th page of a multiple page table. Have no way

  What that page that the cell is activated, because if you check

  myCell.parent.parent, you will get the character textFrame

  containing the entire table, and if you check myCell.parent.storyOffset

  you will get the PointInsertion before the character that contains the table,

  which is again on the first page of the table.

  Perhaps, if you tell us exactly what you are trying to reach, we could

  happen to a workaround.

  Ariel

• The line of the last line of each table page is going to be missing.

  Hi Experts,
  In OBIEE 11.1.1.6.0, I have a report contains more than one line. "When I click on" PDF "Print", the last line of each table page line will be missing. " Why?
  Are you facing the same case? How soluve this question? Thank you.

  Hey Kobe,

  The question, looks lke a bug. Here's the work around, change the table view, click the properties of content next to the text "Table" (at the top of the columns and measures) in the layout-> position In Border pane to choose custom and select only the bottom edge (horizontal line). Now export to pdf format, you must see the border for the last row on each page.

  Kind regards
  DpKa

• How to keep the style of setting shaped tables that you paste IN when copying old pictures?

  Hi all

  I know that CMD-SHIFT-V works perfectly to keep the text styles you paste IN when you copy another block of text that contains different styles, but how do I do the same thing with a TABLE?

  I have paintings from an InDesign document with a set of styles/table cell styles, etc and am copying into another InDesign document where I have tables that have table styles different styles/cell, etc. The only way I can successfully get the information in one table to another is to copy the information from the old table with the old styles and then paste it into an excel worksheet, and then copy the excel worksheet and paste into new tables in the new InDesign document.

  Now, wouldn't that be so bad if I didn't have SO MANY hundreds and hundreds of paintings I was working with! I am currently working on a big catalogue and this workflow is slowing down a lot:)

  Please note that I have deleted all styles (by removing all styles) tables I am pasting FROM, but chose to keep the formatting.

  Once more, I bet that I I will kick myself when I see how the answer is easy!

  Any help would be so appreciated!

  Thank you kindly,

  Christine

  Try converting your old text table (column separator: tab; line separator: paragraph). Copy, select the style of lines and columns you want to paste the text in and paste without formatting in your new table. It may not work if your table is very complicated, but it worked for me on a test very simple.