Parse error the file server clients.xml - after upgrade to Windows XP

Similar Questions

• Parse error the file "clients.xml" Server "SERVER IP"...

  Hello

  no idea why I get this error:

  Parse error the file "clients.xml" Server "SERVER IP". Logon will continue, contact your system administrator.

  and after pressing the OK button, I get another error:

  The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception

  When I try to connect to ESXi 4.0 with vSphere client?

  My clients.xml file content (https://SERVER IP/client/clients.xml):

  & lt; ConfigRoot & gt; ------& lt; ClientConnection id "0000" = & gt; ------& lt; authdPort & gt; 902 & lt; / authdPort & gt; ------& lt; version & gt; 4 & lt; / version & gt; ------& lt; exactVersion & gt; 4.0.0 & lt; / exactVersion & gt; ------& lt; patchVersion & gt; 1.0.0 & lt; / patchVersion & gt; ------& lt; apiVersion & gt; 4.0 & lt; / apiVersion & gt; ------ & lt; downloadUrl & gt; https://*/client/VMware-viclient.exe < /DownloadURL & gt; ------& lt; / ClientConnection & gt;-& lt; / ConfigRoot & gt;-

  Thank you

  I bet you're under Windows 7. The customer is currently divided on 7 and compatibility modes will not help. The frustrating bit is that it works on Vista.

• Custom Mozilla.cfg of the file no longer works after upgrade to v38.01

  I created a custom mozilla.cfg file which contains three main sections.
  First section locks several preferences.
  The second section modifies the chrome - cache the Orange button and add the menu bar.
  Section three adds a folder of bookmarks and links specific to our Organization.

  I also modified the local file - settings.js so that it points to my cfg file:
  Pref ("general.config.filename", "mozilla.cfg");
  Pref ("general.config.obscure_value", 0); This allows to deactivate the byte-shift

  After the v38.01, Firefox opens. He appears briefly in the Task Manager and goes. I started some tests and found that, if I comment out the line "pref ("general.config.obscure_value", 0);" in the local file - settings.js, FF opens but none of the settings I've specified are applied.
  I'm stuck because I have no idea what could be the problem. The allowed syntax has changed? The structure of the files has changed?
  I can post the cfg file if necessary.

  Thank you.

  Yes. This feature has disappeared.

  • bug 1068671 - folderReadOnly refer to bookmarks / results
  • http://Hg.Mozilla.org/Mozilla-Central/Rev/b30d47d94a85

• Could not open the file "hard": insufficient authorization after upgrading the Lion

  After a Lion one upgrade of fails my VM with cannot open the file "hard": permission to open the file. I tried 3.1.3 the uninstallation and reinstallation. Same mistake. I tried r chmod go + wx. The same problem. What are my options?

  Watch: permissions statement for VMS of Fusion

• Keyboard and the mouse do not work after upgrade to Windows 7.

  The operating system on this computer is Windows 7 Professional (64 bit), and the following updates are available:

  MS Security Essentials:
  Update for Microsoft Security Essentials - 4.7.205.0 (KB2994766) - Important

  Windows 7:
  Cumulative Security Update for Internet Explorer 11 for Windows 7 for systems based on the x 64 (KB3021952) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004361) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3004375) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3013455) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3023562) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3029944) - Important

  Update for Windows 7 security for systems based on the x 64 (KB3031432) - Important

  Update for Windows 7 for x 64-based systems (KB3004394) - recommended
  Update for Windows 7 for x 64-based systems (KB3020338) - recommended
  Update for Windows 7 for x 64-based systems (KB3021917) - recommended

  X 64-February Windows malicious software removal tool (KB890830) 2015 - Important

  The problems begin after that I installed these updates. After restarting the computer, I can no longer use my (HP SK - 2506 U) keyboard and mouse (Microsoft Wheel Mouse Optical). I have looked around through the forums and tried several suggestions; However, none have them worked, that's why I post here.

  For example, here are the methods that I've tried so far, while using a PS/2 keyboard connected:

  (1) to start the computer in safe mode only to find out that they keyboard and mouse don't always work.

  (2) went in mode Bios and the keyboard works until I leave.

  (3) Microsoft Fix It tool I tried for USB devices and he said that "the changes have been made", but it does not solve the problem.

  (4) I went to the Control Panel, type "Troubleshoot" > find and fix problems > material and audio > configuration of a device, and he says: "material changes may not have been detected."

  (5) download the drivers on their site, but they will not be installed because 'the latest version is already installed. "

  6) going to remove each USB root hub in Device Manager, and then restart the computer to reinstall the drivers. The computer recognizes the 'new' devices,
  but then fails to install. Also, when I check their error on each of the USB status then in Device Manager, I get an error (code 52).

  (7) I also tried to install an update, restart the computer and then install the update next to try to reduce down which one is causing the problem. However, this method does no more work. For example, I installed an update, then restarted the computer, and it would be nice. Then install the next update, and the problem would come back. I would therefore restore to a point earlier, thinking that the second update has been the cause of the problem only discover that the problem came back after first re-installation...

  I also tried to run a backup of my external hard drive, but it does not work. I also tried to create a system repair disc, and it fails too.

  So far, the only way I can "fix" this problem is if I restore my computer to an earlier point in the day and then hide all updates to install automatically.

  Now I'm wondering if anyone knows why these problems are happening or fix them for good?

  Hi Floyd,

  I appreciate the efforts that you have taken to solve the problem in a few important steps. Since it is a problem that occurs when you try to install updates for Windows, the driver may be signed or corrupted.

  Just a few questions in order to get a clear picture of the issue.

  1. make all the windows updates installed successfully?

  2. What is the full error message you see in Device Manager?

  Follow the thread and check them off below if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-code-52-USB-ports-not-recognizing-connected/2379017c-D513-478C-A184-0d1b7cd408b2?page=1&TM=1424751616733

  I MPORTANT this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  If the problem is not resolved, you can put the computer in a clean boot and check if it helps.
  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/kb/929135
  Note: after the boot minimum troubleshooting steps, see how to reset the computer to start as usual after a clean boot troubleshooting.

  Get back to us if the problem persists.

• Update the system: does not start after upgrading to Windows Vista SP1.

  
  

  I had the same problem. Called Lenovo, the response was:

  N ' - what is Vista come with SP1? No! Then, it is not a supported configuration. You're on your own! Bye: Pei

  Well, there is a feature called "Automatic updates" and Microsoft forces you to use - and you're foolish to not use it! In any case, I hope the support to the Denmark, named Thomas, and his bosses to get a better attitude towards customer.

  My question was simple. He was missing a Windows Service called "system update". It is implemented in "C:\Program Lenovo Update\SUService.exe.

  I had register service menually. There is a tool in the .net framework called InstallUtil.exe. The SUService.exe is implemented in .net, the InstallUtil can help.

  Start a command prompt by right-clicking and choosing "run as Administrator".

  Run:

  C:\Windows\Microsoft.NET\Framework\v2.0.50727\InstallUtil.exe "C:\Program Update\SUService.exe Lenovo."

  Modification of traces according to needs. If InstallUtil.exe is missing, it could be part of the .net SDK - do some research on Google.

  Go to services (in the contral Panel - administrative tools) and start the newly created service "system update". System update now worked for me.

• video distortion SVF14N13CXB after upgrade from Windows 10

  Distortion of the image on the video playback and webcam after upgrade to Windows 10 years of experience.

  Have seen the articles recommending power off of the x-reality, however, it has been deleted during the upgrade process.

  All the drivers appear to be up-to-date.

  Problem solved

  Had to install update for Vaio Control Center by using Vaio Update

• parse error the server clients.xml file

  Hello

  I just installed ESX4i on a stand-alone server and I get error indicating:

  Parse error the server "servername" clients.xml file Connection will continue, contact systems administrator

  Clicking OK is followed

  "The type initializer for ' VirtualInfrastructure.Utils.http.webrequestproxy ' threw an exception

  No idea what may be the cause. I installed the vSphere client.

  See you soon

  Please consider my response as 'useful' or 'proper' marking

  If you installed on Windows 7 search the forums a good thead on the same error and a workaround there.

• Problems to open PDF files after the upgrade of the file server for 2012 R2

  Hello

  This weekend we have improved our main Windows 2003 to 2012 R2 file server.

  Since the upgrade, users (including myself) cannot open a PDF of the file server.  If I double click on a PDF file, it opens as usual, but if I double click a different PDF, the acrobat reader flashes (in the Task Manager I can see another instance AcroRd32.exe starts and stops) but the second document does not open.

  If I close the first document and then try and open the other, and then it opens without any problem.

  This only affected the opening of files on the new file server, opening several files on a local disk is very good.

  If I disable 'enable protected mode at startup' then I can open several documents of the file server.  I would prefer not to have to do.

  Users are using Acrobat Reader 11.0.10 on 64-bit Windows 7 and Windows 2008 R2 Remote Desktop.

  Does anyone have any ideas, it may be the cause?  And does anyone have one solution other than to disable the protected mode?

  Thank you

  Joe

  Hello

  Try the latest Adobe Acrobat Reader DC and check if the problem still exists or goes.

  It can be downloaded from Adobe Acrobat Reader DC install for all versions

  Thank you

  Shakti K

• Error when opening files on the file server

  I can't open the files in our file server CS5.  CS3 and CS4 can open files very well, but I get a message: "cannot open the document...". You may not have permission or the document can be opened already. »

  If I try to open a file on the file server in CS5, I get the message.  When I open the same exact file, copied to a local drive, it opens fine.

  I am on Windows 7, ID 7.0.2 server is Server SnowLeopard MacOsX with system to this day.

  Any help would be appreciated...

  How the path is specified, maybe too much so. What is the location of the server mapped as a drive?

• Error on startup: "application (the file name is) is not a valid windows image, check against your installation diskette."

  computer startup happens on the screen with "application (the file name is) is not a valid windows image, check against your installation diskette." It can be any name of a file that appears, if I click ok it will.  Anyone know what I should do now. Thank you

  Hi LorraineMatthews,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Problems with the load on the file server

  I tried to get a vmmark 1.1.1 operational environment.  All the components work except the STAF process on the file server workloads.  I used the VM prebuilt downloaded from the Web site.  The only change in addition to the later configuration has been updated STAF to version 3.3.3 to match the other customers.  I performed the same process on the database server workload and had no problems.  Here is an output of the various log files and configuration files.  Any help or ideas would be greatly appreciated.

  fileserver0: / usr/local/staf # cat /tmp/start-staf.out

  /etc/init.d/start-STAF.sh: line 15: / usr/local/Scott/bin/STAFProc: cannot execute binary file

  fileserver0: / usr/local/staf # ls - the/usr/local/Scott/bin /.

  3151 total

  drwxrwxr-x 2 root root 544 Jun 11 09:27.

  drwxrwxr-x 9 root root 448 Jun 11 09:38...

  r-r - 1 r root - root 2367 Jun 11 09:27 CAList.crt

  -r-xr-xr-x 1 root root 49461 Jun 11 09:27 FmtLog

  -r-xr-xr-x 1 root root 47954 Jun 11 09:27 PLSTAF.pm

  -r-xr-xr-x 1 root root 6991 Jun 11 09:27 PLSTAFService.pm

  -r-xr-xr-x 1 root root 84330 Jun 11 09:27 STAF

  -rw-rw-r - 1 root root 1596 Jun 11 09:30 STAF.cfg

  -r-xr-xr-x 1 root root 1566 Jun 11 09:27 STAF.pl

  -r-xr-xr-x 1 root root 1543 Jun 11 09:27 STAF2.pl

  r-r - 1 r root - root 1070 Jun 11 09:27 STAFDefault.crt

  rrr - 1 root root 887 Jun 11 09:27 STAFDefault.key

  -r-xr-xr-x 1 root root 30368 Jun 11 09:27 STAFExecProxy

  -r-xr-xr-x 1 root root 5173 Jun 11 09:27 STAFLog.pm

  -r-xr-xr-x 1 root root 23115 Jun 11 09:27 STAFLoop

  -r-xr-xr-x 1 root root 2735 Jun 11 09:27 STAFMon.pm

  -r-xr-xr-x 1 root root 2884223 Jun 11 09:27 STAFProc

  -r-xr-xr-x 1 root root 40992 Jun 11 09:27 STAFReg

  lrwxrwxrwx 1 root root 26 Jun 11 09:27 fmtlog->/usr/local/Scott/bin/FmtLog

  lrwxrwxrwx 1 root root 24 Jun 11 09:27 staf->/usr/local/Scott/bin/STAF

  fileserver0: / usr/local/staf # cat /etc/init.d/start-staf.sh

  #! / bin/sh

  # Environment variables STAF for 3.1.2

  PATH = / usr/local/Scott/bin: / usr/local/bin: $PATH

  LD_LIBRARY_PATH = / usr/local/Scott/lib: $LD_LIBRARY_PATH

  CLASSPATH=/usr/local/STAF/lib/JSTAF.jar:/usr/local/STAF/samples/demo/STAFDemo.jar:$classpath

  STAFCONVDIR = / usr/local/Scott/codepage

  If [$# = 0]

  then

  STAF_INSTANCE_NAME = STAF

  on the other

  STAF_INSTANCE_NAME = $1

  FI

  export PATH LD_LIBRARY_PATH CLASSPATH STAFCONVDIR STAF_INSTANCE_NAME

  / usr/local/SCOTT/bin/STAFProc > /tmp/start-staf.out 2 > & 1 &

  fileserver0: / usr/local/staf # cat /usr/local/staf/bin/STAF.cfg

  # Sample VMMARK STAF.cfg for VMS Linux

  # (workloads: Web server, database or file server)

  #

  # Copyright (c) 2006 VMware, Inc.. All rights reserved.

  # Activate the monitoring of the internal errors and deprecated options

  trace enable track points "obsolete errors."

  # Enable TCP/IP connections

  tcp STAFTCP interface library

  # Trust local default Configuration

  machine local://local level 5 of trust

  # Add the trust to allow remote commands and copy files.

  # Trust the commands below replace the "www.votresociete.com".

  # with the correct name for your network.

  #

  # Define primeclient (usually client0) trust

  machine client0.yourcompany.com level 5 of trust

  # Set the confidence for the customer of this tile.

  # Replace the correct Index of the tile for the "N".

  machine client0.iaslab.com level 5 of trust

  # You can also, if on a network, you can

  # define the confidence level for the network instead of the parameter

  # level of trust from each individual computer. For example,.

  # Trust all hosts in the 192.168.100 network:

  the trust tcp://10.10.101 machine. * level 5

  # Default Service loader service

  serviceloader library STAFDSLS

  #Uncomment and change to match ipalias for the system

  MACHINENICKNAME fileserver0

  # Windows OS only

  # DEFAULTSTOPUSING SET WM_CLOSE

  # The services that need customers preferred to run STAX and STAXMonitor

  #

  # Comment on other clients or VMs

  Library of stax #service JSTAF run.

  # /usr/local/staf/services/stax/STAX.jar------.

  parms # "numthreads 100."

  run of the event #service JSTAF library.

  # /usr/local/staf/services/stax/STAFEvent.jar

  SET THE MAXQUEUESIZE 10000

  fileserver0: / usr/local/staf # cat/etc/hosts

  # Example of hosts file

  #

  # Update to reflect your test lab network naming and IP addresses

  # and extend the number of tiles that you plan to run.

  # Use Update: C:\WINDOWS\system32\etc\hosts on Windows and VMs clients

  # Use Update: / etc/hosts on Linux virtual machines

  #

  Short name of #IP long name address

  #==============================================================================

  Tile # 0

  10.10.101.10 mailserver0.iaslab.com mailserver0 #W2K3 field cont.

  10.10.101.11 javaserver0.iaslab.com javaserver0 #W2K3

  10.10.101.12 standby0.iaslab.com standby0 #W2K3

  10.10.101.13 webserver0.iaslab.com webserver0 #Linux

  10.10.101.14 database0.iaslab.com database0 #Linux

  10.10.101.15 fileserver0.iaslab.com fileserver0 #Linux

  10.10.101.16 client0.mailserver0.iaslab.com #W2K3 client0

  Tile # 1

  10.10.101.20 mailserver1.iaslab.com #W2K3 domain cont mailserver1.

  10.10.101.21 javaserver1.iaslab.com javaserver1 #W2K3

  10.10.101.22 standby1.iaslab.com #W2K3 standby1

  10.10.101.23 webserver1.iaslab.com webserver1 #Linux

  10.10.101.24 database1.iaslab.com #Linux database1

  10.10.101.25 fileserver1.iaslab.com Serveur_Fichiers1 #Linux

  10.10.101.26 client1.mailserver1.iaslab.com #W2K3 client1

  Tile # 2

  10.10.101.30 mailserver2.iaslab.com mailserver2 #W2K3 field cont.

  10.10.101.31 javaserver2.iaslab.com javaserver2 #W2K3

  10.10.101.32 standby2.iaslab.com standby2 #W2K3

  10.10.101.33 webserver2.iaslab.com #Linux webserver2

  10.10.101.34 database2.iaslab.com #Linux base2

  10.10.101.35 fileserver2.iaslab.com #Linux fileserver2

  10.10.101.36 client2.mailserver2.iaslab.com #W2K3 client2

  Tile # 3

  10.10.101.30 mailserver2.iaslab.com mailserver2 #W2K3 field cont.

  10.10.101.31 javaserver2.iaslab.com javaserver2 #W2K3

  10.10.101.32 standby2.iaslab.com standby2 #W2K3

  10.10.101.33 webserver2.iaslab.com #Linux webserver2

  10.10.101.34 database2.iaslab.com #Linux base2

  10.10.101.35 fileserver2.iaslab.com #Linux fileserver2

  10.10.101.36 client2.mailserver2.iaslab.com #W2K3 client2

  It seems that you have installed the STAF of 64 bits on the file server. You must install the 32-bit version on the file server.

  64-bit STAFProc v3.3.3 bytes 2884223 32 - bit STAFProc v3.3.3 is 3083208 bytes

• tried to re set now I can't get past a loading error "the proxy server refuses connections."

  I tried the "reset Firefox" button and now I can't get Firefox it loads. Get error "the proxy server refuses connections." I'm not on a LAN, just a computer at home, how can I fix?

  If you do not keep the changes after a reboot or have problems with preferences, see:

  • http://KB.mozillazine.org/Preferences_not_saved

• I hosted my server windows with dad go but the file server does not

  I greeted WindowsServer 2008 in go daddy with cisco firewall .i have set up active directory and server files but when I try to map the file server in my clients over the internet, it does not work

  his problems with the firewall they had put in place for me

• Error "the RPC server is unavailable."

  I have a Windows XP Home SP3 PC who, since yesterday has been report error "the RPC server is unavailable" in attempting to perform specific tasks such as remove programs via the control panel and of the files of backup using Acronis 10. 'Paste' files which have been 'copying' ed by right click of the mouse or drag-and - drop, and finally, Internet Explorer 8 does not load authorize also Windows Explorer is no longer. I suspect that all these problems, which began at the same time, are connected!

  I did a virus check full system using AVG 8.5 and booted in safe mode "...". from last known working configuration"but nothing works.

  Any thoughts?

  I'll make sure that your Remote Procedure Call (RPC) server is running.  Right-click on my computer-> Manage and go to the services section.  You start and stop the services from here.  You can also right-click and select Properties... and see the service dependencies.