Disconnect-VIServer-Server $Server - Force does not work as documented

Similar Questions

• I finished the installation of Sharepoint 2010 and he is told to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?

  I finished the installation of Sharepoint 2010 and went through the Setup Wizard. It is said to use the username and password you loged on the server with does not work. What should I do to access the sharepoint URL?

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepoint2010general/threads

• OSX Server caching does not work after update

  It was low on my priority list, but the OSX Server that we run in the House for the caching seems to have stopped caching; from what I remember, it was related to the update software to 10.11.4 of what it was before, and server software everything that has been installed to 5.1. Updates both to the latest versions now have not helped. It of kind of frustrating, but all he puts in cache are now asking that makes for itself. No customer request is visible. It worked before.

  There seems to be no useful diagnostic that I can find to establish why the hell it suddenly does not work.

  Platform: Mac Mini, "the end of 2014", bought this year. OSX currently on 10.11.5; 5.1.5 Server

  Network configuration: IP public addresses multiple; several subnets.

  Clients do not use the same IP address as a server.

  Full assignment of the IP of the site listed in _aaplcache._tcp TXT DNS records (plural - because I did it for the DNS records for each subdomain DNS LAN client) using the type prs; DNS is on Windows Server 2012R2. Any length of characters, because they were not specified during the installation of OSX Server cached the required DNS records.

  No firewall is between the server and clients on the local network (only a L3 switch), but obviously, if the customer traffic leaves our network, it passes through a firewall. No change to the rule group since it worked finally.

  The Mac Mini has an interface (with IP address and corresponding DNS record) in each subnet of the client (using virtual LANs), but it seems to register with the Apple servers using its main wired LAN IP (which can reach customers) with the Apple servers.

  Mac Mini connects via gigabit ethernet.

  Wireless connectivity is through a mix of HP MSM and Ubiquiti access points; no system seems to result in customer traffic.

  My understanding of the protocols involved are something along these lines.

  -OSX server registers with Apple, using its normal connection; transmits the local LAN IP address for the cache clients to use; can pass TXT DNS records to help "seed" of customers, or can use the parameter entry in the cache server configuration.

  -Customers use the TXT DNS record to inform the global servers of Apple that they need the IP address of the server cache.

  -Apple returns the local LAN IP address.

  -The customer is for the server cache.

  -Profit.

  I certainly see the first happening party - the Debug.log show apparently successful registration; the cache in the applet Server service is green - but no client request seems to happen.

  

  Obscured address IP addresses are correct.

  

  Things are green and just seem to.

  

  Looks like he should be happy.

  

  IPs are correct and correspond to the DNS records.

  Help! What other steps can I take to diagnose - and trouble - this problem? The Apple Help documentation is not really very useful (I understand what he says), but he doesn't really give sysadmin level overview of what to do when he's not "just works".

  Thanks in advance for all understand how to debug properly and fix this.

  .. .clients can and collect software on the internet (that we want to avoid as much as possible).

  Amount of updated data in cache is so small that I did it (reset button) in the case which has been randomly a question. No joy. Was previously more than 300 GB in size, across many types of content.

  If it is not clear, the clients and servers using NAT, but different IP are used, depending on the subnet they come. He previously worked.

• Server.findForType () does not work as expected

  Hi all,

  I have problem with finding vApps using the Server.findForType () method.

  Lets start from the beginning...

  Goal is to produce streams of work that could be called from outside using SOAP (SOAP is unfortunately obligatory). Portal that will call worlflows is underway of another people.

  They said a number of input and output parameters that workflows must accept and provide.

  I have test with vCenter Orchestrator environment, Director and everything works fine.

  SOAP host is created in Orchestrator using the build workflow (attached configuration - SOAP_Host_Configuration.rtf).

  I use SOAP UI to test the portal > communication Orchestrator.

  I am able to call using SOAP UI workflows.

  I am producing a simple workflow what powers on TIME using the string as an input parameter and who would return the same data as output parameter - VAPP UUID, ID, href, or anything that is considered VAPP unique brand.

  Out of SOAP UI of my VAPP is attached (SOAP_UI_vApp_Info.txt).

  If I try to use Server.findForType () it only works if I specify it like this:

  Server.findForType ("vCloud:VApp", "8265a03471add63d97f36c52e86fba8cebade2a3ca7bfcb4cb58cdff9ae9f8c / / /https://172.16.140.215/api/vApp/vapp-c7b33a3e-2174-465d-a4f2-0fa9663dc75d");

  and it does not work if if specify like this

  Server.findForType ("vCloud:VApp", "urn: vcloud:vapp:c7b33a3e - 2174-465 d-a4f2-0fa9663dc75d");

  In this case I get error:

  [21:49:35.911 2014-08-10] [I] Server error: ch.dunes.model.sdk.SDKFinderException: cannot perform the operation ' find (' TIME ',' urn: vcloud:vapp:c7b33a3e - 2174-465 d-a4f2-0fa9663dc75d') ' on the plugin "vCloud".

  Problem is that data "8265a03471add63d97f36c52e86fba8cebade2a3ca7bfcb4cb58cdff9ae9f8c / / / . https://172.16.140.215/API/vApp/vApp-c7b33a3e-2174-465D-a4f2-0fa9663dc75d "cannot be retrieved afterwords and be used as a unique identifier VAPP - vapp.dunesId returns nothing. "

  I use:

  vCenter 5.5.0 1623101

  vCO 5.5.1. 1617127

  vCloud Director 5.5.1 1753992

  vCloud Director Plugin 5.5.0.1894135

  vCenter Plugin 5.5.2.1869849

  Thank you very much for the help.

  Goran

  Of course, no problem. I found even a better way to retrieve by ID directly.

  Ex:

  vApp = host.getEntityById ("PPPV", "urn: vcloud:vapp:65a4db36-8efa-4512-afb5-7d663c13e2be");

  Kind regards

  ALEKS

• Guest force does not work with a graphical navigation

  Hello
  I have following problem.
  
  I have a X Dashboard page with two guests, State and country. Countries is limited to the first message (I checked 'Compel' check - box prompt definition). In the same page, I have a bar with the navigation rule chart in a dashboard page target Y.
  When I click it, prompt constraint does not work, in fact it is not filter countries according to the first prompt but select all countries.
  
  Example:
  
  Page X:
  
  In State quickly, I select "Italy"-> guest of country is properly limited. In fact it displays correctly "Rome, Florence, Turin and so on.
  
  Click on the bar graph (in order of navigation set graphic properties to the dashboard page Y)
  
  Page Y:
  
  Command prompt is filled with 'Italy'-> guest of country is not limited. In fact, it shows even States that do not belong to the State of the Italy.
  
  Why?
  
  
  Is there a solution?
  
  Thank you
  
  Giancarlo

  Hello

  Change the display of the graph and filter-> is play guest at State and country

  Thank you
  Oldia...

• Inside the PIX515 DNS server, but does not work :(

  Inside the PIX515E DNS server,

  I have configured on the pix:

  access-list 100 permit udp any example of 1.1.1.1 (for the host) eq field

  access list 100 permit tcp any example of 1.1.1.2 (for the host) eq www

  static (Inside, Outside) 1.1.1.1 192.168.0.1...

  static (Inside, Outside) 1.1.1.2 192.168.0.2...

  100 outdoor access-group

  on the DNS (192.168.0.1) server, I configured http://www.xxxx.com mapped to the point 1.1.1.2

  ATER configed, everyting ok. The user on the internet can reach http://www.xxxx.com

  But yesterday that he SUDDENLY NOT work: (((user can get the server www only via 1.1.1.2, DNS NO WORKED goal.

  Who can help me?

  If it worked, and nothing has changed on the PIX, so you have to look and see what's changed on your internal DNS server or the WWW server, or if your ISP has changed something on their external DNS server.

  I'm also agree it could be a problem of zone transfer that perhaps you don't realize, because it looks like something might have expired, which when it comes to things DNS, is usually the area has expired and cannot be transferred again.

  Try allowing port 53 TCP thru to your internal DNs server and see if that helps the situation. If so, then close your ACL down to only allow your servers select external DNS zone transfers.

  In addition, say the syslog when you try to connect from the outside? I can't emphasise this point to everyone that reads this, if you have problems of connectivity through a PIX, always check the syslog, it will give you the fastest and the best source of information about what is happening.

• VMware Server folders does not work in ESXi server, why?

  Hello

  My client is using VMware Server to run virtual machines.  Chose to go to ESXi server and I tried to copy and use the .vmx or hard creating VMware Server in the data store.  I tried to add them to the inventory, but his does not not like that.

  Computers are virtual created using VMware ESXi created VMs different server?  But the file extensions are the same.

  All entries on this observation?

  TIA

  You use VMware Converter to import your VM to ESX.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• 10g to Oracle Enterprise Manager Application Server Control does not work

  Hello
  We have installed the application on 9.21.0.98 Server (solaris machine).
  For the server is woking, but the report server does not.
  
  Now I want to connect to Oracle Enterprise Manager 10 g Application Server Control
  to solve the problem
  
  In my PC (windows), I opened internet explorere (IE), and I entered the following URL
  http://9.21.0.98:7778 / (7778 is probably http port)
  Now I see a web page.
  
  Here I see the following on the right side of the page
  
  Oracle Application Server Logins
  
  To manage and monitor Oracle Application Server,
  
  Log on to Oracle Enterprise Manager 10g Application Server Control:
  username: ias_admin
  password: specified during installation
  
  When I click on this link http://9.21.0.98:1156 / URL has appeared on the IE and I get the following error
  Internet Explorer cannot display this webpage
  
  Now to see if any application is running on this port (1156), I logged the solaris machine where the application server is intalled and I exected netstat - a | grep 1156 command. But he didn't show me anything
  
  Could you please solve my problem?
  
  Concerning

  Is it possible to change the name of report server?

  See Paulo Esteves answer in How to change the name of the report server?

• AAA server group does not work

  All,

  I have an aaa server group set up on my router to use for Wells, AAA, but it doesn't work that way, but when I simply specify a server and not the list of group everything works. Any ideas why this is. I'm going to pos the config.

  *****************************************************

  version 12.2

  horodateurs service debug datetime localtime

  Log service timestamps datetime localtime

  encryption password service

  !

  host BUSINESS name

  !

  AAA new-model

  AAA server Ganymede group + TACSLOG

  Server 192.x.x.x

  Server 192.x.x.x

  !

  Group AAA authentication login default local TACSLOG

  default AAA authorization exec TACSLOG local group

  AAA exec by default start-stop accounting TACSLOG group

  AAA commands 5 default start-stop accounting TACSLOG group

  AAA commands 15 arrhythmic default accounting TACSLOG group

  activate the password xxx

  !

  username password xxx xxx

  username privilege 15 xxx

  username xxx autocommand menu ADMIN1

  IP subnet zero

  !

  !

  IP - SBA.GOV domain name

  !

  !

  call the rsvp-sync

  !

  !

  !

  !

  !

  !

  !

  !

  interface FastEthernet0/0

  IP address 255.255.255.0 192.x.x.x

  automatic duplex

  automatic speed

  !

  interface Serial0/0

  no ip address

  Shutdown

  !

  IP classless

  no ip address of the http server

  !

  !

  ADMIN1 menu prompt ^ CSELECT YEAR OPTION PUNK ^ C

  ADMIN1 1 SHO IP INTERFACE BRIEF text menu

  by menu ADMIN1 1 SHOW IP INTERFACE BRIEF command

  menu text ADMIN1 2 SHOW the INTERFACE FA0/0

  order by menu ADMIN1 2 SHO INT FA0/0

  menu text ADMIN1 3 SHOW RUN the INTERFACE FA0/0

  order by menu ADMIN1 3 SHOW RUN INT FA0/0

  menu ADMIN1 text 4 see THE ARP

  4 ARP see by ADMIN1 menu command

  ADMIN1 5 OUTPUT text menu

  order by ADMIN1 5 LOGOUT menu

  !

  Dial-peer cor custom

  !

  !

  !

  !

  privilege exec level 5 show ip interface brief

  privilege exec level 5 show interface fa0/0

  privilege exec level 5 show show passage interface fa0/0

  show privileges exec level 5 show arp

  !

  Line con 0

  line to 0

  line vty 0 4

  password xxx

  !

  end

  When you define an AAA server group, you associate an IP address from the server on behalf of the group. You must always define the AAA server separately where you also set up the key that is used. In your case, you must add to your configuration:

  RADIUS-server host 192.x.x.x Council key

  RADIUS-server host 192.x.x.x Council key

  HTH

  Steve

• Content Server Explorer does not

  Hi all

  I installed the JSK and the Sites of Webcenter console front-end works.

  But with the same port of the Content Server Explorer does not work.

  He says: 'cannot access Content Server Explorer with the port given with the given username and password.

  Using the fwadmin credentials to access the ESC.

  Could someone suggest on that.

  Concerning

  Bishnu

  Hello

  I met the same problem.

  I tried following & it worked for me

  in my local

  I tried with the IP (127.0.0.1 for me)

  name of user fwadmin

  password xceladmin

  serverlet as a standard servlet (catalogmanager)

  Thank you

  René

• "Automatically detect settings in WIN7 IE8 does not work with the particular user account

  Hi all

  For the moment that I recreate the account user as workaround, but it takes a long time.

  End users in our enviourment cannot site external brower without the correct "automatically detection of parameters.

  I checked the support.microsoft and the answer.microsoft but not high relevant article.

  GPupdate/force does not work in our environment.

  I was wondering if there is any solution to reset the settings "automatically detect" and get parameters in WIN7?

  Such as manually delete cache "Settings automatically Detection" regedit or somewhere else to force Win7 to get a new one.

  Please kindly share the reason of this problem if possible.

  See you soon

  Hi Daniel,

  Thank you for your answer!

  If the computer is connected to the domain network, the question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps. If you need help or information, I'll be happy to help you.

• Windows server 2012 RDP Clipboard does not work for regular users

  Hello again,

  I wanted a little more secure our 2012 server.

  I disabled via GPO, local disk and printer redirection when a user connect through rdp.

  But I activated the policy to users, so while you can do the redirection of the Clipboard between there pc and rdp Server (copy / paste)

  Problem is that it works in only for the admin.

  The fact that local drive redirection is disable that copy / paste does not work?

  Force the update of the Group Policy object and I sign the user out and reconnect and copy and paste does not work

  and also, the process rdpclip.exe is running. I have restart this process.

  Any help or guide

  Thank you once again.

  Hello

  As I mentioned in your other Thread that we do not respond to server problems in this community.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Tecra A8 - sound does not work on Server 2008 x 64

  Hi I tried various dirvers and can't seem to get this to work.

  The driver installs fine, but then there is no sound on the headphones or speakers.

  I tried the util_mute_off_25847B without success.

  I have the dual boot and the sound works in the XP installation

  I have server 2008 32-bit installed and sound was working.

  The audio service is enabled.

  The latest drivers, I tried where the Realtek_R219.

  The front volume control does not work since I don't have the driver for it.

  Model Tecra A8 PTA83-e 04l022g3
  http://EU.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?service=EU&DISC_MODEL=0 & ACTION = PRINT_WITH_BACK & com decided .do w = Yes & PRODUCT_ID = 120557 .broadvision

  Hello!

  I m a bit confused why you need a server operating system with the sound on the laptop...

  However, I think that you can't do anything. Toshiba does not have drivers for a server operating system and if the manufacturing (Realtek) driver does not work, you have to accept that.
  Sorry but there is no other solution.

  Good bye

• Thumbnail option does not work in Terminal Server in Windows Server 2012 and server session

  This might be a stupid question.

  We have two Windows server 2012 R2 - TS and DC. The clients are connecting to TS and access the shared network drives present in DC. I always unchecked 'show icons, never thumbnails' and 'Show thumbnails in System Properties' enabled on DC and the two TS.

  No always thumbnail option.

  You will need to click on each image. Users have many files containing multiple images. It's annoying to click and view each image.

  Note: NO GPO is configured to block it. Checked.

  I can't find any object GPO to allow this option to be :)

  More info. For customers, anywhere, whether network shares or all folders in TS session. It does not work. Also tried painting and Windows Photo Viewer.

  Here, any help will be very appreciated!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server Update service does not work after the installation of KB2720211

  I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches.  It was a new server starting with WSUS added at this time 1 months ago.  He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function.  After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore.  It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.

  The problem is that the update service does not start.  An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is.  Here is what has been done so far all that in the same issue:

  1 deleted WSUS and restarted and installed it again.

  2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)

  3. install the KB2720211.

  4. installation KB2734608

  5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer.  I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.