How to set the name of resource VISA as a constant?

Similar Questions

• get the name of resource VISA

  I connect serial port COM3 to a digital multimeter, I can sure that COM3 is displayed in Device Manager. but I don't know if COM3 is in the name of resource VISA list. If COM3 is not in the list, I want to update resource VISA name.

  So my question is how to program can get the entire list of the name of resource VISA, so that the program can compare resource VISA with COM3 automatically name? How the program can update the name of resource VISA, if COM3 is not in the list?

  LabVIEW 2011 windows 7

  Thank you

  Control of resources VISA automatically displays the available visa resources. If it isn't then looks like there was an error in the installation of NI-VISA.

  An alternative is to use your own control, as suggested here: http://forums.ni.com/t5/LabVIEW/VISA-resource-name-control-want-to-refresh-list-of-COM-ports/td-p/13...

• Can not find the name of resource VISA

  I am trying to run the example code, provided by the manufacturer with a 3a Keithley 2420 SourceMeter.  It is turned on and put in place for 488,1 protocol GPIB.  It is connected to my computer via a GPIB KUSB - 488A cable.  On the front panel of the example program, there is a menu drop down titled "VISA resource name."  The two options at my disposal are LPT1 and COM1, but I don't think one of this is the name of the resource on the right.  Does anyone know what the name of resource VISA should I use with the Keithley, or how I can find this? If it helps, I have provided the example program I use. Thanks in advance!

  As a general rule, only the material NOR will be recognized in MAX and you wouldn't get any VISA resource for Auditors not - NOR. If there is a VISA for the Keithley driver, you can try to install as secondary visa driver and enable Tulip MAX. Keithley support support is the best place to ask questions about the installation of their hardware to LabVIEW.

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• How to set the name of principle user lowercase and samaccoutname

  Hi Experts,

  How to ad the name of principle SAMAccountName and user provisioning got capitalized.

  How can I set up an AD of and can set attribute AD in tiny i.e. SAMAccountName and the username policy.

  Ask for your help.

  Kind regards

  David

  Have you tried to use an adapter that will use the java code to set in lowercase?  You don't have to use the default prepopulate adapters.

  -Kevin

• How to set the name of VM for VAPP instantiation

  Hello

  I'm trying to set the name for a virtual machine when its parent is instantiated VAPP from a model.  Note, I know how to change the name of the TIME itself, just not it's child VM.  The requirement to have this game during the instantiation is therefore the name of the computer in vSphere is in place.  Can someone direct me on how to do this?  Thank you.

  Hello

  in the API v0.9, it is impossible to change the name of the virtual computer on instantiation. One way to do that using dial operation, but 0.9 of the vCloud Director of Service, you are also not able to change the VM even if using the composition.

• How to set the name of the font?

  Hi guys,.

  Can U tell me how the name of font difine in flash builder?

  I want to set the name of the font.

  Please help me

  fontWeight = "bold".
  textAlign = "center".

  Thank you

  JaxNa

  fontFamily

• How to use USB with the name of resource VISA?

  Hello

  I am new to LabVIEW and I'm working on a code that must acquire data from a measuring device. This unit has only a USB output, so I have to work with it. As far as know the block that is used to refer to an external port is VISA resource name. I installed a driver that recognizes the serial ports, and they appear in the list of VISA resource file to the front panel. So I thought that installing the DEVICE driver so that the USB ports would appear. I installed and nothing of USB ports. I don't know it's as simple as that, or work with USB ports is a little more difficult. I tried many things and nothing worked I am here.

  PS: I noticed that the version of the driver is 64-bit (my pc is 64-bit) and my LabVIEW version is 32-bit, what could be the problem?

  The device incidentally is Digital Analyzer WT500, Yokogawa.

  Thank you.

  Victor,

  the suggestion driver instruments is to make it easier by using the instrument.

  Normally, you need to install a player from the manufacturer (if it is not installed, the instrument appears as a USB in Device Manager) and the driver NI-VISA. But for some instruments, manufacturers have APIs that uses NI VISA to communicate with your equipment.

  In order to check whether your instrument appears correctly in Device Manager (as indicated by Yokogawa). If this is not the case, check whether Yokogawa has a suitable driver for this tool and install it.

  Is this clear?

  If you wish, you can contact NI Brazil support site or by phone (11) 3149-3149 Ext 3.

• How to pragmatically set the name of the user event?

  In LabVIEW 2010, I register a user event during execution by using the function of events Reg, but I want to put the name of the user event, according to the runtime. LV said "If wire you a cluster at the entrance to the data type of the user events , LabVIEW uses the type name of the cluster in the event user name." But I need set the name of the event based on the data that is generated during execution.

  How can I pragmatically set the name of a user with data from cluster event at run time?

  I can do this by changing the text of the label of the bunch before I use Reg events function?

  How will I know what name the user never received?

  Thank you.

  I found a viable solution. I can create a user with a name known event. The event that is sent with the event data will include a Source DN string that identifies the sender of the event. The event handler can then handle each event based on the name of the Source. This is equivalent to have several unique named events, is only right they all share a common event data format, which is OK in my case.

  It works very well.

  THANKS for all the suggestions.

• How to change the name of provisioned resource account

  Hello

  In the custom connector that we have currently in place when an account is put in service the name of the account appears as a random value.

  How do change the name of the account funded from this random number to some loginid to say name invalid.

  Thanks in advance.

  Try the following steps:

  To change the name of the account to the account user id, you can follow the instructions below:

  1. open the form of the process of the resource that you want to display the user id as the name of account, instead of this strange number for example. UD_IPNT_USR

  2. create a new version of the form.

  3. go in the Properties tab.

  4. Select the user ID property and click on add property button.

  5. Select the account name and the value is false.

  6. save the form and make the version active.

  7 connect to IOM self-service console, select a user with iplanet account for her. You can see the user id of the account in the account instead of the strange number name,

• How to set the size of the Windows Explorer preview pane so that it will retain the size adjusted?

  All know how to set the size of the Preview windows exployer pane.  I can't remember or 'stick' to the adjusted size.  It always develops a great size, concealing of file information (name, date modified, size, etc...) it's very great pain.

  Help, please!

  Thank you

  * original title - preview pane of Windows Explorer is a pain.*

  Hello

  Try this:

  (a) click the "Hide the preview pane" in the upper right corner (on the left of the help) of Windows Explorer

  (b) to resize the Windows Explorer window for how you want

  (c) click the 'Show preview pane' icon in the upper right corner (on the left of the help) of Windows Explorer

  Navigate to the link below: http://social.technet.microsoft.com/Forums/en/w7itproui/thread/569509ae-a37a-441f-8cc3-95d5231b171b

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think, if this post can help solve your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to set the properties of the individual parcels programmatically?

  Hi all

  I develop a XY chart that can have between one and six serial data.  How can I programttically set the properties of the series individually?  I can create a property node for things such as 'Name', but when I do it's only the name of the last data series is changed.  How can I set the value of 'Name' for different series?

  Thank you!

  You must set the field property Active before you set the Name property of draw.  The plot Active area must be on the index of the series you want to change.

• How to set the value of a variable in a cluster in LabVIEW to c#?

  Hi guys, I'm working on a small c# program, which by using the interface provided by LabVIEW.  And I know that, with the help of lv. SetControlValue (name, value) can set a variable just on the front panel. But in my case, there are several groups on the front panel. Then it confused me how to set the variables in these groups. For example, there is a cluster named clusterA and a variable named a., I tried something like this:

  lv.SetControlValue("clusterA.valueA",1);
  

  but it totally inoperable. Everyone has some experience with this sort of thing? Thank you very much!!

  Hey guys, thanks a lot for all your response. I just found a simple way to solve this problem. For example, there is a cluster named "ClusterA", and there are only two witnesses, who are: an int value named "IntA" (default = 10 IntA value) and a string value named "StringA" (by default the StringA = 'abc'). In c#, if you call the method:

  var clusterA is vi (Array). GetControlValue ("ClusterA");

  you will get a table looks like: clusterA = {10, 'abc'}; So if you want to change IntA 123, you simply do:

  clusterA.SetValue (123, 0); 123 the value, 0 is the index of IntA in clusterA, after this clusterA table = {123, 'abc'}

  After that, simply to make the table in LabVIEW using:

  VI. SetControlValue ("ClusterA", clusterA);

  and now you see the LabVIEW, IntA is changed.

• How to set the bass and treble on the speakers of Windows XP?

  Original title: Windows XP are involved.

  How to set the bass and treble on the speakers of Windows XP?  Advanced button is not available to use.

  Hi YBatey,

  You can try to install the latest software/driver to be built in the audio part of the motherboard or sound card (if it is used in this computer).

  This can provide the feature you're looking for.

  For more information, please visit this link: How to manage devices in Windows XP

  Hope the helps of information.

  Please post back and we do know.

• My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  My window size is about 1/4 "wider than my monitor screen. How to set the size of the window?

  Hello

  ·        You did it changes on your machine before this problem?

  ·        You have a LCD or TFT monitor?

  Usually in LCDs, there will be an option to set the button of the screen on the monitor resolution.

  You can also follow these links for the resolution of the monitor & check if it helps.

  Change the resolution of your monitor

  To change your screen resolution

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.