discovery of endpoint for the vCloud Director

Similar Questions

• License key for the VCloud Director

  Hello guys,.

  I installed VCD 5.5, version track of thought may be available... But when I access the portal for the first time... she asks me license key... Please tell me how to use VCD for a trail period or

  Please share license key for VCD 5.5 trail.

  Thank you

  Tarun Gupta

  You deploy the vCloud Director device?

  The key will be in your MyVMware account that you used to sign up for the trial version.

• Cannot create the vCloud Director VDC

  Hi all

  Need help with my proof of concept of vCloud implementation Director. running on 5.1 vCloud Director unit. Just to give you an idea, I followed the VMware vCloud Director 5.1 Assessment Guide that we find on the VMware Web site.

  Note: My setup does not contane VXLAN although we have the network VLAN supported to improve network performance.  Of the vExpert mentioned to create a dummy VXLAN right in the vCloud Director and I'm not sure how to do this in vCloud Director console. (I noticed a default VXLAN is already created, I understand vCloud 5.1 has this feature is enabled by default)

  Installation succeeded in creating the Org VDC failed with error 'cannot create the VDC' found this disabling and re activation will release the Red 'X' I think it's false positive because it shows us that everything is perfect even if we get an error message in the logs ' status: error "and with" details: Internal Server Error' find the home images below.

  
  

  " In any case when it comes to download media after having created the catalogue for Org VDC we get the error message cannot complete the operation because the current organization VDC"Demo-Org-VDC"is disabled or is not ready '.

  I also noticed that we get an error message on vcenter Server vcloud (cell) cannot create the folder name already exists check the last my vcenter Server error message.

  also attached the logs in the images below.

  I found two post, which there is not yet of resolution and the other said its solved but does not have the fix.

  Any help to point me in the right direction will be appreciated.

  I will be happy to provide you with newspapers if necessary.

  Thank you

  Ibrahim

  I was not talking about data warehouses.  I refer to the view in the vSphere Client.

  Open the vSphere Client... and go to the computers view models and virtual (c# = Home button at the top, then models and virtual computers)

  In this perspective, there is a number of record Blue icons. Make sure that none have the same name as you describe.

  This is directly related to the error message in the client image vSphere that you took in the original post "cannot create folder. "PNG"

  vCloud produces an error because of something that happens in vCenter.

• How to remove auto set the profile of the vcloud Director of storage

  Hello

  I would like to delete the free storage set the vcloud Director profile. But have no corresponding button, anyone has idea?

  I already removed "self storage defined profile" and "storage cap" vcenter.

  Thank you

  Simon

  Oh ~ ~
  Sorry about that, found that it remove the provider vDC.

  Thank you

• How to get the version of the vcloud director in the Java development kit

  Hello

  I'm trying to get the version of the vcloud director of IPY. I am currently using

  customer. Login ("administrator@System", "dangerous", client.getSupportedVersions () .get ("1.0"));

  to get the version... but I want to get the version of the VCD not the version of the api... I use the VCD 1.5 and 1.0, so according to the investigation period, I need to go get the VCD version.

  Thank you

  Kiran

  Hi Kiran,

  The object that is returned when GET-ting/api/admin contains a element indicating the version of vCD. It is available in both API 1.0 and 1.5.

  Because I'm not very up-to-date with software development kits, someone familiar with the Java SDK can direct you to the class concerned representing this API call.

  Kind regards

  Todor

• Error "operations is not supported on the object." when importing .ovf in the vCloud Director 5.5 machine

  I am trying to import a virtual machine (composed of three .mf, hard, .ovf files), when I try to download the VM, it gets downloaded 100% in the catalogs, but gives an error "Cannot create" as condition to the end and when I check the error in detail, it gives me that "operations is not supported on the object.". Checked the Virtaul Center, I get the same error that 'operations is not supported on the object."in the taskbar. Google it a lot but could not find a relevant solution.

  Just for the record I have DRS activated in full auto mode and only in the aggressive State.

  Can someone help me what I can do to remedy the problem.

  There are two parts to the upload.

  5.5 download dialog box represents the progression to the record of transfer vCloud Director of the FVO.  The download method is via the integration of Client plug-in (which uses the OVF tool).

  If the pop-up window can 100% success, I think that the element of the catalogue shows 50% and tries to download files to vCenter/ESXi as an import job.  If the import job fails, then you need to investigate the newspapers of vCenter/ESXi side for more details.

• where can I get the vcloud Director OVF?

  For the life of me I can't find where to download the Director unit of vcloud OVF.  Can someone point me in the right direction?

  https://www.VMware.com/go/try-vCloud-Director

• Setting of the endpoints for the fixed/static Images

  I am trying to create my first video, which is a little more than a slide show consisting of an audio file and a series of still images. The images are all displayed on the same line ("trail"?), named V1.

  I haven't found how to control precisely where an image first, and when it ends. Part of the problem is the confusion on terminology. I don't know if a fixed image is the same as a clip, or if an endpoint and the markers are the same thing.

  In any case, I clicked on an image to select it. Then I pharmaceutical the playback head to the right of the icon of the image, which indicates the point where I want the image to stop the display. Then I pressed the letter that I have on my keyboard, I thought was supposed to create an endpoint, but it did not work. So, what is the right way to do it?

  Also, is it necessary to establish points of beginning for still images, if they are correctly displayed by default?

  Thank you.

  Since the clips (and the images are fetched) are already on the timeline I and O are not that useful. The inside and outside is more for when you place clips on the timeline.

  There are two ways to get where you want to go.

  1 move the playhead where you want to cut to stop.

  2. make sure you of course no clips are put into evidence.

  3. Press CMD/CTRL k (this will put a montage where the playback head - gives you two clips)

  4. click on the clip 'too' for the right to modify it and delete.

  Another way

  1. put the cursor where you want the clip to stop.

  2. click on the next clip and and once highlighted, drag to the left until its left edge aligns with the playhead.

• Install the vCloud Director

  Hello

  I want to deploy vCloud Director but I need license VMware Distrubed avalaible switch and DRS by vSphere Enterprise Plus, there's a verssion of vSphere Enterprise Plus free license

  Thank you

  vSphere Enterprise Plus there a tax... you should talk to your sales representative for your exact requirements verses your existing environment.

• vCloud Director 5.1 prepare host has no

  We have a cluster of vSphere 4 host mixed with ESXi 4.1 and 5.1 5.1.

  3 of the 4 hosts are prepared and working in a vCloud Director 5.1 provider VDC.

  Recently, I upgraded the left of ESXi 4.1 to 5.1. After the upgrade, I tried to prepare it for the vCloud Director Provider VDC. But run into an error:

  Failure occurred during the preparation of the host XXXXX

  -java.net.SocketTimeoutException: Read timed out

  -Reading has expired

  I tried following things:

  -Make sure there is no virtual machines running on the host. The host really going into Maintenance mode whenever I run the preparation.

  -Restart the ESXi host

  -Activate the firewall ESXi 80 443 httpClient

  -Run esxcli list of software vib | grep vcloud to check if the agent is already installed. But nothing showed up.

  All this made no difference. Installation always times out...

  Someone at - he seen this before?

  Ok! Now, the problem is fully resolved. Guess what the problem... The internal USB controller on the blade has been fixed in BIOS to USB 1.1! I changed it to USB 2.0 and everything works twice as fast and I was able to prepare the vCloud host successfully.

  Do not know why the BIOS setting has been changed just for this blade. Glade to have it well sorted.

• Cannot delete the storage policy to vCloud Director 5.5

  I'm trying to delete the storage policy to vCloud Director 5.5. I did in several vCloud Director organization VDC but stuck with one on the same instance of vCloud Director. I migrated all the VMs, the media and the VAPP model to another storage strategy. I checked in vCenter as there is no VMs who belong to this policy. Always in the vCloud Director, I see 30MB "asked" to this strategy of storage for this VDC.

  Any ideas what I need to check? How can I find what always uses this storage strategy?

  The problem has been resolved. Failed ISO image was only visilble in Administration and media & other only. After it has been removed, we were able to delete the storage policy.

• vCloud connector 2.5 - copy the model of vSphere to vCloud Director fails

  Hi all

  I'm trying to make a copy of the model of the private Cloud for vSphere (e.g. my instance of vCenter lab) the vCloud Director private cloud (my instance vCD lab, which is deployed and registered with the same instance of vCenter mentioned above) with vCloud connector 2.5.

  I have deployed the server component of vCC, configured and deployed two nodes of vCC - a to connect to vCenter for private cloud config vSphere and another to connect to the vCloud Director org for the basic cloud vCD config private. Moreover, the vCloud Director is registered to the same instance of vCenter which is used for vSphere cloud.

  I then tried to open a copy of the model from the vSphere cloud node to the node of vCD. The task to export the OVF template will start, and the task of SCR plugin will also display the copy task. This vCD instance also model any TIME if you go to the properties of the VDC organization selected during the SCR copy Wizard.

  After about 18%, the percentage remains stuck there for a little bit before the 'Export OVF Template"task fails with"Operation timed out ". After that, the task indicated in the vCC plugin will fail also later with (OVF Export failed. Null message) and the import of VAPP model in vCD job will fail also - VAPP failure will take upward of space inside the affected storage however profile until I have manually remove the failing through vCD VAPP model object.

  Anyone else having this problem? I've seen this problem on both environments so far: vCenter 5.1 update 1 with vCD 5.1.2 and vCenter 5.5 with vCD 5.5. If the problem seems to be specific to the version of vSphere. The logs generated by server SCR bee all that useful for me to understand what went wrong did not.

  Thank you

  You can consult this KB, if you haven't done so yet:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2078110

  I hope this helps.

• Why 5.5 vcloud Director only has not the ability "add a network to an organization?

  I have deployed the ovules of Director 5.5 vcloud in my lab environment and watching videos. In the videos, the guy has deployed vcloud Director 1.5 eggs. I noticed that this homepage of vcloud Director 5.5 is not the option 'Add a network at an organization' as in vcloud Director 1.5.

  Did remove this feature in 5.5. Then I thought that it could be controlled from within the Organization after you create it, but again once I created the Organization, there is no option to add a network to this organization? I'm playing something here? How can we tolerate that they are private, the administrator of the Organization to create a network that is using a NAT or directly connected to the external network on the fly and remove it once it is not necessary. I though that it was a feature of the vcloud Director.

  I used the EGG apparatus, I have use the .bin file.

  Your help is appreciated. !!

  You EF network pool Org vDC wide (it's in properties)

  At the same time that you create a network Org inside the Org vDC going to just use the current network are entrusted to him.  Then, you make all your usual choices.  to do this, vDC display Org itself... go to list of org vDC in manage and monitor, and then double-click the VCC Org that you want to add a network.

  VAPP networks work exactly the same, create you them at the time the vApp is created.  This will use the network pool that is currently assigned to the Org vDC when the TIME Gets deployed.

  Overall, the function at the level of the consumer (org users) is the same, the process-level administration system has changed a bit.

• vCloud Director: the SSL creation

  Hello

  I am beginner in vmware. I installer 5.1 esxi, vcenter server 5.1 and Manager vshield. When I try install vcloud director, I stuck to the creation of the certificate SSL.car the Uzhgorod/opt/vmware/vcloud-director is not found!.

  How Doi - I do?

  Thank you

  The first part of the installation is to install the vCloud Director application (e.g., RPM).  This process should create a path on the Linux system:
  / opt/VMware/vCloud-Director.
  Once this operation is completed, ask you if you want to run the script 'configure '.  Before that, you must have created the SSL certificates.  Therefore, you will need to refuse to run the script 'configure' right now.
  There are steps in the manual to create certificates.  See:
  http://pubs.VMware.com/VCD-51/topic/com.VMware.ICbase/PDF/vcd_51_install.PDF
  Page - 17
  You will need to make a file of keys with two certificates, one with the alias "http" and the other with the alias "consoleproxy".
  Once you have the key file build, make sure that the user name "vcloud" cannot read this file.  This can be done with the command 'chown' Linux.
  Now, we can try to run the Setup script:
  / opt/VMware/vCloud-Director/bin/configure

  =========================

  Via Google Translate

  =========================

  The first part of the installation, install the vCloud Director application (e.g., RPM). This process should create a path on the Linux system:

  / opt / vmware / vCloud Director.

  Once this operation is complete, you are asked if you want to run the script 'configure '. Before doing so, you must have created the SSL certificates. Therefore, you may need to decrease running the script 'configure' right now.

  There are steps in the manual pour create certificates. See:

  http://pubs.VMware.com/VCD-51/topic/com.VMware.ICbase/PDF/vcd_51_install.PDF

  Page - 17

  You will need to make a file of keys with two certificates, one with 'http' to alias and the other with 'consoleproxy' alias.

  Once you have the key file build down - that the "vCloud"username can read this file." This can be done with the command 'chown' Linux.

  Now we can type nut coupling configuration to run the script:

  / opt / vmware / vCloud Director / bin / configure

• Cannot access vCloud Director VM console

  Hello

  We´re in the face of a very strange problem when you try to access a console virtual machine via the vCloud Director 5.6 Web Portal.

  Let me describe the environment:

  1 - 2 vCloud Director cells;

  2. load balancer 1;

  3 - 1 VIP for the proxy console; 1 VIP for the web portal;

  4 - certificate of CA-signed 1 with wildcard characters (*. < domain >) instead of certificates 2 ordinary host (http. < domain > and consoleproxy. < domain >).

  5 - the following procedure was used to create the keystore of Java and to be able to import the certificate even twice (each time with a different alias):

  OpenSSL pkcs12 - in /keystore/ < company > .pfx-out /keystore/ < company > .pem

  OpenSSL pkcs12-export - in /keystore/ < company > .pem-inkey /keystore/ < company > .key-out _http.p12 /keystore/ < company > - name "http".

  OpenSSL pkcs12-export - in /keystore/ < company > .pem-inkey /keystore/ < company > .key-out _console.p12 /keystore/ < company > - name 'consoleproxy '.

  keytool - v - importkeystore - srckeystore /keystore/ < company > _console.p12 - srcstoretype PKCS12 - destkeystore /keystore/ < company > .ks - deststoretype JCEKS

  keytool - v - importkeystore - srckeystore /keystore/ < company > _http.p12 - srcstoretype PKCS12 - destkeystore /keystore/ < company > .ks - deststoretype JCEKS

  6 race "keytool-list - keystore /keystore/ < company > .ks - stores JCEKS" shows two aliases in the keystore.

  7 - vCD installer not to complaint about it.

  8 - certificate is loaded correctly when accessing the web portal

  Now the question:

  1 - the gate opens as it should;

  2. each type of action is possible and works very well;

  3. when we open a VM console for the first time, it opens normally;

  4. If we close it and try to reopen, or if we try to open a second console, it won´t open;

  5 - according to the browser:

  5.1 - console remains black. State begins to 'connection '. Changes to "Offline" after a short time;

  5.2 - console remains empty. Status hangs on "Loading"; He sometimes goes to "disconnected";

  6. If restart us the two cells, it begins around (able to open the first console, cannot open the rest);

  7. same behavior if the access using the VIP (with load balancing) or directly (using the internal IP address of cells).

  I ve seen some issues with what seemed like the same problem but no conclusive answer.

  Any help on this would be appreciated.

  Thank you very much.

  The fixed.

  1 - upgrade of vCD 5.6.3 to 5.6.4.

  2 - something with virtual machines, we had deployed for testing. We have erased their and the new have no behavior.