Error "operations is not supported on the object." when importing .ovf in the vCloud Director 5.5 machine

Similar Questions

• Linked clone failed: the operation is not supported on the object

  Hi all - I would appreciate help on a related clone operation that is a failure.

  I use Quest vWorkspace to create linked clone VM in my environment.  It integrates with virtual Center and creates from a VM snapshot parent according to normal related clones.  It has just stopped working and I am trying to track down the cause.  The task fails with the error message in the console of VMware vCenter: the operation is not supported on the object.

  The vCentre is 5.5 and esxi.  vWorkspace is v8.0 MR1.  The parent VM is located on an iSCSI datastore.  I tried to put the clones of destination on premises and warehouses of NFS data with the same result.  Unfortunately I can't (don't want really to) move the VM parent from the data store that I have of many VM related to this virtual machine.

  The failure message is a bit generic, so I looked on through the vmkernel.log and vpxa.log and it is an excerpt from the vpxa.log whereby it shows failed task 153.  Can someone please indicate something in the newspaper that had to be examined or another newspaper to look at?

  vWorkspace attached error and below:

  Linked clone has not CreateLinkedClone_Task of CloneVmLinked failed! Task of VMware CreateLinkedClone_Task status error - the operation is not supported on the object. -Call stacks-VmLinkedClone.VmLinkedCloneService.CloneVmLinked String vmInvPath, String strSnapshotMor, String strNewVmName, String strSysprep, ManagedObjectReference morFolder, ManagedObjectReference morResPool, ManagedObjectReference morHost, String strDatastoreName, Boolean bQuickPrep, String domainNameIP, String

  See attachments

  Thank you very much
  Wikus

  Additional accessories:

  • 
    Untitled picture.png

  Hello guys,.

  For those of you already on 5.5, I did a few tests these days. I did find a magic bullet yet as a single parameter that is sure to break but I came up with a workaround.

  I found that if my ESXi server was still on the 5.1, vWorkspace could deploy clones linked via vCenter 5.5 - it's only when the ESXi is also on 5.5 that you have a problem.

  If any of you have ESXi hosts still on 5.1, you can deploy there for now.

  In ESXi 5.x, it is easy to have an ESXi virtual machine. You might want to consider creating some virtual boxes ESXi to deploy on while the vworkspace dev team look at why it does not work.

  I know that this is not the best solution in the world, but it's better than no work around

  Thank you, Andrew.

• Virtual and models - computers cannot move the VM in the folder "operation is not supported on the object."

  Hey everybody,

  We are running vSphere 4.0. During the whole period that we used vSphere, we use vApps and Resource Pools hosts and Clusters to organize and manage the virtual machines used by our production team and test. From what I understand, this can be semantically incorrect (see: http://virtualizationreview.com/blogs/everyday-virtualization/2010/10/vsphere-folder-organization.aspx). So, I've navigated to models and virtual computers, created in folders with permissions of the user and tried to move their respective VMs to their folders... and I get the following error:

  "The operation is not supported on the object."

  So, should I go on the resolution of this or to leave things as they are?

  What are your opinions?

  Is there a right or wrong way to manage VMs of the multiple users?

  Thank you for your time and help,

  Johnathan

  Avinash21,

  Thanks for the tip.

  Move the virtual machines of the TIME solved the problem.

  When I suggest them to the root of the host, I was able to move in a user folder.

  Thanks again,

  Johnathan

• recovery disk will not load error message pc not supported by the system recovery disk.

  had a virus that has taken possession of my PC and wanted the money order to the for free, so I install the recovery disk and chosen in advance and restored the pc at the time, he removed the hold and the system worked very well for a few days. then the system kept to self-extinguish. tried loanding the recovery disc and gave me the message pc not supported by the recovery disc, and now when start received bios award phoenix instead of the hp logo.

  attempted to run antivirus software but before he could finish short scan the pc shuts off I tried in safe mode and the same situation. I downloaded several antivirus programs, but it would still be closed the pc. I tried to install the recovery disk, and it gave me an error message pc not supported by the system recovery disk. now when I start up instead of the blue screen with HP logo, I get a bios award phoenix and other information that I can't copy down it goes too fast. Since I couldn't get rid of the virus, he took to a pc using store, they have removed the virus and loading of operating system vista, problem is I had the word and excel. Now, I can not get my desktop to factory oem computer. I really need my word that I have all my passwords for the accounts listed, I saved them to analyze the drive, but now I have not any other readers like drive j. Any suggestion on how to solve the problem, so I can load the recovery disc.

  Thank you very much

  Frenchquarter, welcome to the forum.

  I suggest that you download and install OpenOffice.  It is FREE and is open to all documents created in MS Office.  If it doesn't, at least it costs you nothing to try.

  I used OpenOffice for years.  Believe me when I say that he will do everything that will make MS Office and in some cases, the better.  At least, you will have to use in the future and you'll be amazed to see how they can do it for FREE.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• vmrun return "this operation is not supported with the current permit.

  Hello

  I just installed the 5.1 esxi and I have 2 vm windows works well.

  I use the vSphere client to manage the hypervisor.

  I have not installed vCenter stuff, so it is just bare hypervisor os.

  When I ran the following:

  «vmrun t h 10.10.0.9:443 u vpxuser Pei xxx list esx»

  He returns with "this operation is not supported with the current permit.

  In fact, I have installed esxi5 on hypervisor licensing, do not know why I get this error message.

  Access the esxi5 through the sphere client works very well (I could create vm, take snapshots, etc.).

  Please let me know if I missed any steps. Thank you

  -antony

  Welcome to the community,

  with the free license of the hypervisor, access to vSphere API is restricted, which is most likely causing this issue. To unlock the API, you must have a paid license. Unless your host has already exceeded the 60-day evaluation period, you could try to revisit the evaluation mode to see if the command works as expected.

  André

• VixDiskLib_Cleanup always returns vixError (6) - the operation is not supported for the specified parameters

  Any ideas how we can determine what parameters it dislikes?  I am the appellant after VixDiskLib_Disconnect as recomment docs and using the same connection params struct I used with VixDiskLib_ConnectEx.

  Thank you

  -Ron

  UInt32 numCleanedUp = 0, numRemaining = 0;

  /= VDDK 1.1 header says connection spec should be null =/.

  connectParamsP - & gt; vmxSpec = (char *) NULL;

  vixError = VixDiskLib_Cleanup (connectParamsP, & numCleanedUp, & numRemaining);

  vixError (6) - the operation is not supported for the specified parameters

  Ron,

  I think that your connection is probably not use all transport advanced, in which case _Cleanup does nothing. If you connect without using advanced transport, cleaning returns 6 - there is nothing to clean up.

  Thank you

  Annick

• Non supported configuration of virtual machines for the fault tolerance. The operation is not supported on the object. When activating FT

  Hello

  I try to activate FT on a virtual machine that AFAIK ticked all the boxes for FT but I get this message when activating it. No clue as to what might happen or where to connect for extended information? This error message is too generic...

  Thanks in advance mates.

  Did you follow KB1019165-fault tolerant to fails to 42% with the error: not supported configuration of virtual machines for the fault tolerance

  André

• Error - & & operator is not defined for the java, type arugument lagn.string

  Hi all
  
  I am new to this forum and also java.
  Here is my program
  Please let me know the fix for this error
  
  Thank you
  Guna
  
  The logic is, I want to check the customer first, last and middle name.
  
  Senario 1: I want to check the name of the customer, if he gives only the NAME
  Senario 2: I want to check the name of the customer, if he gives the last NAME only
  Senario 3: I want to check the name of the customer, if he gives only the NAME
  Senario 4: I want to check the name of the customer, if he gives the first name and last name - this wher I get my error
  
  
  
  
  
  
  My coding
  
  self-learning package;
  Import Java.util;
  public class CustomerUtil {}
  
  Boolean SearchCustomer (List < Customer > listObj, customer cust)
  {
  
  Iterator listOfCustomerObj = listObj.iterator ();
  Customer cust1 = null;
  While (listOfCustomerObj.hasNext ())
  {
  cust1 = listOfCustomerObj.next ((customer));
  }
  
  If (cust1.getFirstName (.equalsIgnoreCase (cust.getFirstName ())))
  {
  System.out.println ("found customer");
  
  }
  If (cust1.getLastName (.equalsIgnoreCase (cust.getLastName ())))
  {
  System.out.println ("found customer");
  
  }
  
  I get the error message here, how to fix this error. Please let me know is there any other want to rewrite this condition.
  
  If (cust1.getFirstName () & & cust1.getLastName () .equalsIgnoreCase (cust.getFirstName () & & cust.getLastName ()))
  {
  
  System.out.println ("found customer");
  }
  
  Returns true;
  }
  
  
  }

  Matt wrote:
  People
  I'm new to this forum and also in java.

  I'll post any coding.
  I tried to put the code tag but his does not work. Sorry
  I saw the link, but I can't do it.

  Here is my code

  private static final int FIRST_NAME_MATCH = 1,
                           LAST_NAME_MATCH = 10,
                           WHOLE_NAME_MATCH = 11;
  int SearchCustomer( List listObj , Customer cust ) {
    Iterator listOfCustomerObj = listObj.iterator();
    Customer cust1 = null;
    int matchCount = 0;
    while(listOfCustomerObj.hasNext()) {
      matchCount = 0;
      cust1 = listOfCustomerObj.next();
      if ( cust1.getFirstName().equalsIgnoreCase( cust.getFirstName() ) )
        matchCount += FIRST_NAME_MATCH;
      if ( cust1.getLastName().equalsIgnoreCase(cust.getLastName() ) )
        matchCount += LAST_NAME_MATCH;
      if (matchCount == WHOLE_NAME_MATCH) break;
    }
    return matchCount;
  }
  

  The light of the foregoing, it is my best guess at what you describe you want. But it is not really make sense unless you think that you want the first person who is on the first and last names; what you could do to help eliminate the duplicates. But if this is the case you should consider a set instead of a list as they are not duplicates is added in the first place.

  Maybe you can take some ideas from this property. But if you want to match each person with the immediately previous person, then you must edit the item of the loop by removing of this method and put it in the method that calls this method, passing the two customers only and comparing them, or something like that.

• Help please: CloneVM_Task is created but will fail with: operation not supported on the object

  Someone Please help with this, I'm breaking my head with this for 5 hours now.

  I submit, in CloneVM_Task with the following XML (which returns a task id back http://i.e. the application has been accepted in this format):

  & lt; CloneVM_Task xmlns = "urn: vim25" & gt;

  & lt; _C type = 'VirtualMachine' & gt; VM - 938 & lt; / _This & gt;

  & lt; record type = "Folder" & gt; Group d1 & lt; / file & gt;

  & lt; name & gt; 1_UBUNTU 804 & lt; / name & gt;.

  & lt; spec & gt;

  & lt; location & gt;

  & lt; data store type = "Datastore" & gt; datastore-683 & lt; / store data & gt;

  & lt; pool type = "ResourcePool" & gt; resgroup-57 & lt; / pool & gt;

  & lt; / location & gt;

  & lt; model & gt; 0 & lt; / model & gt;

  & lt; powerOn & gt; 1 & lt; / powerOn & gt;

  & lt; config & gt;

  & lt; memoryMB & gt; 1024 & lt; / memoryMB & gt;

  & lt; numCPUs & gt; 1 & lt; / numCPUs & gt;

  & lt; / config & gt;

  & lt; / spec & gt;

  & lt; / CloneVM_Task & gt;

  However, the task itself returns an error saying: the operation is not supported on the object.

  Does anyone know what it is?

  The info that I'm sending should be 100% correct:

  - vm_id: the machine ID of the virtual MODEL VM I'm cloning (100% certain that it is correct)

  - file: the rootFolder returned by ServicContent

  - data store: the data store ONLY I should store VM on. When I query for this data store information it shows clearly that it is accessible and multipleHostAccess = true, so

  - resourcePool: I got this info when querying my ComputeResource properties. I have 1 cluster and resourcePool value that's what I put.

  I really have NO idea what's going wrong here... The CloneVM_Task creates a task - but that's where everything falls apart.

  Please HELP!

  Yes, you should not use the rootFolder, which is just the folder root inventory integer vCenter. A default vmFolder will still exists if you have additional folders, and that's the one you reference to. By default, you must question him to do this, where one day you decide to create folders against hard coding moref ID. The IDS are digital and probably default folder gets this value by iteration, but again, I recommend he petitioned against hard this coding.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Reviews operations - the operation is not supported

  Hello

  I use vmware.vim api in a c# project. When I try to get the GuestAuthentication with AcquireCredentialIsGuest object, I get the following error:

  "A NotSupported server of type error with the message"the operation is not supported on the object."occurred during the requested operation operation."

  Orders are not disabled, virtualmachine, or on the host. I'm running out of ideas what could be wrong. Can someone help me?

  Code:

  GuestOperationsManager t (GuestOperationsManager) = customer. GetView (customer. ServiceContent.GuestOperationsManager, null);

  GuestAuthManager c = customer (GuestAuthManager). GetView (t.AuthManager, null);

  NamePasswordAuthentication userCred = new NamePasswordAuthentication();

  userCred.Username = "xxxx";
  userCred.Password = "xxxx";
  userCred.InteractiveSession = false;

  GuestAuthentication a = c.AcquireCredentialsInGuest (vm. MoRef, userCred, null);

  Thank you!

  Hi Méteron,

  If I understand correctly it train physicians AuthManager.AcquireCredentialsInGuest we are not allowed to use NamePasswordAuthentication with this method. Instead try to pass an instance of NamePasswordAuthentication directly to the method that requires authentication and do not GuestAuthManager at all.

  Hope this helps :-)

• Printer does not work on the Windows XP computer, get the error message like "an error occurred during port configuration. This operation is not supported.

  Original title: 1. printer stopped communicating with the computer. 2 port - associated configuration error?

  I have a big problem. All of a sudden my printer - AIO Photo964 said he cannot communicate with my computer. The printer works fine. I tried switching cables USB, all the trouble shooting suggestions, etc. etc. Nothing works and it makes no sense. I can't print anything. I thought it would be that I installed a Seagate external hard drive backup, then I uninstalled the program - no help. ITunes installed recently, because she had changed the printer default, changed back - no help. The USB cable is not tight in the printer (or both cables, I tried), but AFAIK it's not new (?) And when I try to configure the port, I get the error message "an error occurred during port configuration. This operation is not supported"I have no idea what it means.  Can someone help me with this? I have to return a new printer? The USB port on the printer is repairable if this is the problem? How will I know? Who would do that?

  Thanks, I'd appreciate any help.

  It is always useful to have the complete error message without paraphrase.

  It also helps to identify the version of Windows you have, including service pack.

  And it helps to give the manufacturer of the printer in addition to the model.  In your case, I guess you have a Dell printer.  I know that some Dell printers are rebadged Lexmarks, but I don't know if it's a.

  Why you try to configure the USB port?  It cannot be configured - you've discovered.  It's normal.

  It's quite strange that an iTunes installation would have had something to do with the printers.  What printer was made by default after installing iTunes?

  You say you have tried another USB cable.  Have you tried using a different USB port on the computer? Have you checked in the Device Manager (start > run > devmgmt.msc > OK) to see if there is all the warning icons in the category "controllers of Bus USB?

  I suggest you uninstall the printer software and driver completely and reinstall by following the directions in Its first Article.

  Don't skip step 4.  After step 4 and step 5, follow these steps:

  Important: If you have a Lexmark printer, skip the following

  Open a command prompt window (start > run > cmd > OK)
  type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  dependent on the spooler of sc config = RPCSS
  net start spooler
  output

  Note that there is no space before the = and there is a space after it.

  The Windows XP driver for the Dell Photo AIO 964 printer is here--> http://www.dell.com/support/drivers/us/en/04/DriverDetails/DriverFileFormats/Product/dell-964?DriverId=R113115&FileId=2731111743&urlProductCode=False

• I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  The upgrade from Vista to Windows 7

  I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  Have you tried to do an upgrade installation or a custom installation?  A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new.  If an update install does not install work, you need to do a custom.

  In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista.  Vista upgrade requires a detail, a copy in the Windows 7 box.

• Error creating - snapshot operation is not allowed in the current state

  Hi all

  Using Veeam Backup & Recovery 6 software to replicate a LIVE VM (virtual MACHINE, 1). But I can't and I got the following error:

  Error creating - snapshot operation is not allowed in the current state

  The above virtual machine can only be copied when it is STOPPED the VM is running on ESXi 4.0.

  I have a more LIVE VM (virtual MACHINE, 2) on the ESXi Host which I was able to replicate successfully to another ESXi host.

  I contacted the Veeam Support before posting here.

  Things to note about VM 1: I can't take a snapshot manually from the vSphere client. This option is greyed (disabled) on VM1... While its OK on VM2.

  Veeam support told me that since its software uses the snapshot function of ESXi and this feature is disabled, replication cannot continue.

  Thanks for helping me on this.

  Exactly what I thought. When you delte this PCI passtrough your Backup Exec tape will not longer work.
  You will not be able to do replication when you use this passtrough.

  Only solution for replication (which is what I think you want for purposes of disaster) is to install a 3rd VM (or as physical) as "Backup Server" where you install Backup Exec and enable PCI-Passtrough to your tape drive. Then this new virtual machine with Backup Exec backup.

  After that you can delete the passtrough of your SBS and your replication will work.

  Sorry

  Concerning

  Simon

• HTTP: Error 58 (the network function is not supported by the system)

  Hi all

  I have a problem with HTTP Client in LV 2011 functions.

  As you can see in the screenshot attached, I try just:

  -Open a handle-> no errors

  -Send a web request using the GET method-> error 58

  -close the handle

  The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.

  You have any idea of what could be the problem? Thank you in advance for your help!

  J.

  I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.

• Calibration error SMU-4141 niDCpower version 1.8, "calibration function is not supported by the device."

  Dear Sir.

  Nice to meet you.

  When I run the SMU-4141 "Adjust voltage Leve.vi niDCPower Cal" calibration function niDCpower version 1.8.

  It shows an error "function of calibration is not supported by the device." (false cae)

  But if I run the calibration function SMU-4141 "niDCPower Cal Adjust voltage Measurement.vi", (real deal)

  It will work.

  See attachments.

  My equipment list:

  Windows XP SP3

  LabVIEW 2011

  niDMM 3.0.5

  niDCpower 1.8

  PXI-1073 case with 2 cards.

  SLOT2: SMU-4141

  slot6: PXI-4071

  Could someone tell me the solution?

  Hi Peter,.

  The calibration process indicates that the call of the function of voltage adjust NI - DCPower Cal calibrates both the output level of the device as well as the ability to measure of the device.  It is even for the Cal of NOR-DCPower function adjust a current measurement.

  You must perform a calibration automatic on the device prior to the initial audit of the device, before the adjustment process and before the final verification process.

  I'm not sure I understand your question very well.  Please let me know if I have not responded sufficiently.