disorder of the Tower!

Similar Questions

• Full service then no appeal abandoned service cannot connect to the Tower

  Posted to help others:

  I bought an iPhone 6 s it took 3 hours for Verizon connect my phone to my new Verizon account. The phone would display full service bars then, slide an or no service in bars. the phone was finally connected but may 2016 so far I sill experience the same problem of poor or no service call and dropped. Often the phone will not even scream or try to connect to the network.  Apple has replaced the phone 3 x but with no. change my service problems. Verizon and Apple senior level tech support spent to treat 30 + hours on the phone with me trying to solve this problem. We replaced the SIM cards without change. When I put the SIM card in my iPhone 6 it works fine. Full don't signal any calls interrupted and service when roaming. Back in the 6s and no service in the same place. Put the SIM card in the other Iphones not without problem.  If roaming is enabled, phone often it will not conbect to the tower at all. WiFi call is disabled and LTE voice data are on. I've disabled CDMA and data with little or no change with the problem. When iphone 6s loses the service and I toggle airport power phone it will display momentarily full service bars, then the bars one or not, while remaining connected to LTE. In some areas, I can receive calls but can not shout. Sometimes I can txt use data without showing on my plan as using FaceTime and can use the internet. The order indicated above of multiservices to no service happens within 10 seconds repeat throughout the day all areas companies Verizon towers and riaming towers. Verizon finally got the iPhone 6 s to work with full signal across remote I've ever had service, but continue to hamper the not being able to call in roaming. Shortly after that, the phone back to old habits after that they tried to solve the roaming problem.

  After 5 months of no stop calls to Verizon senior level tech supports on September 22, a high tech support tech senior level line finally came to the conclusion after 3 hours of troubleshooting determined it is a software problem Apple 100%. It determined that the phone for a month not was not connected totally to Verizon even if I used it. There to reset the SIM card and the network settings on the phone several times during this period to have the phone drop any connection after initial power that showed a full service then dropped the LTE then, he loses all the bars of service then shows no bar service then no service what so ever in 10 seconds. This was the problem with this phone on the first day.

  He explained that he has heard of what is happening and that Apple is currently working on a solution, but will not be out until possibly October 2016. He also said that this problen is happening now with new models Iphone 7.

  HE then stated that a specific sequence is usually not used must be used to reset the network settings by releasing the bug fix.

  How to restore your device

  1. First of all, back up your device using iTunes or iCloud so you don't lose any personal information.

  Note: If this is the first time that you have saved on iCloud, it may take time for several reasons (speed of Wi - Fi, amount of info on your device).

  2. Connect to iTunes to restore your device. 3. Choose "Set Up as new". 4. Make sure you that you connect to iCloud with your Apple ID so that only your contacts are re-added. Do not re - add photos, music or applications as they can be the source of your problem. 5. Set up your email. 6. Test for the next few days to determine if your problem has been resolved. 7. Restore your backup from iTunes or iCloud.

  Note: If you have a food problem, try to use the recovery mode.

  I hope this helps someone it is to have the same problems. I'm waiting to see if the bug fix works otherwise I'm going to an android phone. It has been too long a process without having a phone that works.

  I have the same problem - it has taken far too much time out of my weekend to try to resolve this problem. In addition, the Apple support person I spoke on the phone was very condescending.

  I've read elsewhere that change the LTE cell Options > Data Only will not solve the problem. So far, this seems to have worked for me.

• iOS 9.3 do bluetooth hands-free connection to my Audi stuttering. Using google maps with instructions of the Tower burn on bluetooth still works very well. It's an iPhone 6. Another 6s to 9.2 iOS iPhone works very well with the hands-free bluetooth.

  iOS 9.3 made connection kit hands free bluetooth to my Audi stuttering.

  Both the speaker and the stuttering/pulse microphone so that you cannot speak/hear.

  Using googlemap-app with instructions of the Tower burn via bluetooth still works very well, his is perfect.

  It's an iPhone 6s and the car is an Audi A6 2010 with the Moose Bluetooth adapter business.

  Another 6s to 9.2 iOS iPhone works fine with bluetooth hands-free, just like my phone before the upgrade.

  I tried to disable the twinning, remove all old in the car and the iPhone and pair Bluetooth devices again.

  Anyone alse experinceing this?

  And tip on how to fix it?

  I have the same problem with Audi Q7 2008 and iPhone-6s - iOS - 9.3.

• HP Envy Phoenix 860-019: turn out the lights on the Tower

  Is it possible to turn off the multicolored lights on the Tower without having to open the Tower?  I don't really have the experience and the know-how to start sleeping inside a computer tower.

  @Sweeney139, welcome to the forum.

  No, there is no way to turn off the lights.  At this point, HP did not have this option available.  I had a Phoenix at the beginning and I couldn't even turn them off inside the case.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• When I put my memory card in from my video camera that nothing happens, how do my videos now that I don't have my camera, and the Tower not responded to my card?

  I don't have my video camera but I don't have my card memery with video always on it, when I put in my tower where the memory card reader is nothing happens I have no I have idiots on what to do, but the light on the Tower beside the drive when I put the card in what the hell happened?

  Hello
  See if the card has memory of a lock switch on the side it... just turn off the lock.
  I hope this helps!

• When I turn on the Tower, I sometimes get an error in checkpoint 0085. What can I do so that I don't have to reboot

  When I turn on the Tower, sometimes, I get the password screen, but not always.  0085 error is on the screen

  Hello LindaDearborn,

  1. don't you make changes to the computer (software or hardware) before having this problem?

  This problem may be related to hardware like your CMOS could be altered. If the problem persists, you can contact your computer manufacturer to check if there are any questions related to hardware components.

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• can I transfer by key windows7 USB to my old windows xp pro Tower is on the Tower

  can I transfer windows7 to my laptop by USB to my old tower computer which has windows xp pro? I have recently rebuilt the tower with disks, memory and motherboard.

  No, you can't upload it.

• Noise whirring at the front of the Tower

  Hello. I have an Acer Aspire 3200 X desktop. Yesterday, I started to hear a constant humming noise at the front of the tower. I stop the computer, and half an hour later, I brought the computer. After a short while the whirring returned. He seems to have no effect on the system so far. I got this computer for many years and have had no problems. Any help will be appreciated. Thank you

  Wow!  I couldn't have asked for more detailed instructions.  Thank you for taking the time to go into the details. As I said, I never really got all the PC I had. I talked myself into believing that I am not good it. I'll give it a try. If I have questions, which I do, should I add just the post to this workflow or should I click on your name? Once again, thanks a lot for taking the time. Thank you

• My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
  the startup type, click on the pointer, and then select Automatic (delayed start)
  the service status, click start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Disorder of the WRT54G Wireless - G Router!

  I had problems with my internet connections for the last days. Initially, I called my ISP because I suddenly lost all connectivity. They told me to unplug the router and just connect my access directly from the modem cable to the Tower, since, on their side, they saw that I was connected to the internet and also had a router. They told me to leave the router disconnected for a few hours for the cache to eliminate because it did take in the change IP. So I did, and a few hours later, I've hung up and was back on the web. But I noticed a problem. There are a few sites that I have been unable to access. The taskbar would be simply read 'wait... '. "and then I get the problem loading Page telling me that the connection was reset, or that I had a firewall problem. I checked my firewall and security programs to ensure that my settings were allowing connections to these sites. Indeed, they are. I googled my problem "cannot access some Web sites" to see what I could do with little success. I remembered what the tech said on the router and took a suggestion from one of the tech sites to check another browser to see if it works there. Indeed, I met the same problem there. I plugged my connection from modem to the Tower again and I was able to access these sites once more. So I thought that it is a problem with my router. On top of that, wireless connections can be made. They're going through. I tried to restart the router again and used the disc that came with it to implement thinking it would help me. In addition, I accessed the site router to change the settings. Nothing has helped or worked. Hiding what ever is there is always here, or any problem with do not accept IP addresses is always present. I rebooted my system and I tried to access the router site again, only to be blocked as some other sites. I'm really worried here. I tried the command prompt and: ipconfig / flushdns version don't renew method still no good. Just what is wrong with my router? How can I get this resolved. Why are these inaccessible sites now and how to get what is mucking up the DNS recognition to clear and it can work properly again? I got it on DHCP so it can automatically recognize changes. My IP is not static. I'm really worried here. Help, please!

  I have it!

  Ok. I did two things:

  1. I changed my port (just in case).

  2. I did a hard reset on my router (did not notice the button next to the original cable entry).

  I put off the power to the modem, router and my PC. Then I turned on my modem, enabled on the router port, turned the router back, did a hard reset and he waited a bit. Then I turned on my PC.

  After that I did my own usual drive, consulted the web and done a clean cache of the browser (just in case). My little brother to come and do a test to see if it connects wireless to...

  ALTO! It's trendy!

  I tried the sites that I have problems with and SUCCESS! They connected!

  IT WORKS NOW! I am so happy!

  Thank you all for your help! It is appreciated!

• bought the Tower in real estate sales. need to reset so I can use

  original title: reset

  bought the Tower in real estate sales. I can use so you will have to reset it. don't have the papers or the disc. don't have password for the other owner.

  Friday, January 7, 2011 15:28:44 + 0000, onthegobarb wrote:

  bought the Tower in real estate sales. I can use so you will have to reset it. don't have the papers or the disc. don't have password for the other owner.

  If I bought a used computer, no matter who previously owned, the first thing I have with it would be to reinstall the operating system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone of another errors and problems, possibility of kiddy p0rn, etc, and I would not recommend anyone else to do.
  If you reinstall Windows properly, you are playing with fire. If
  you do not have a Windows CD, you will need to purchase a.

  Ken Blake (MS-MVP)

• Is coming 11 Pro flat keyboard practice for use of the Tower?

  Thank you very much for this... just wondering if his intended for the sole use of table. It is difficult to tell from photos if its strong enough for the use of the tower.

  You will probably have better results, use on a stable surface.

• Since the reinstallation of Windows 7 I have same Wifi access so my laptop and I heard a small noise from inside the Tower

  Since the reinstallation of Windows 7 I have Wifi access even if my laptop and tablet of my wife can become if the router is OK. Also, it restarts or freeze without reason. Sometimes I hear a metallic noise inside the Tower, but not always. My friend suggests a hardware problem, but has no suggestions on how to solve it.

  Original title: Windows

  Since the reinstallation of Windows 7 I have Wifi access even if my laptop and tablet of my wife can become if the router is OK. Also, it restarts or freeze without reason. Sometimes I hear a metallic noise inside the Tower, but not always. My friend suggests a hardware problem, but has no suggestions on how to solve it.

  Hello

  After a reinstall of the operating system, you must reinstall the latest drivers from your computer manufacturer's website:

  Go to the website to make your computer > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  ________________________________________

  And you do not tell us why you did a reinstall and if there reboot/freeze before you did this reinstall.

  FYI: Desktop computers normally are Wi - fi unless you install additional hardware for this.

  ________________________________________

  Noise inside a desktop computer can be caused by fan/s or harddrives about to fail.

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive...

  See you soon.

• Encrypted L3 Communications between the TOWER and WLC?

  Hi all

  I work with a client who wants to put the towers away to their WLC (a 4402). The problem is that communications between the TOWER and WLC must be secured, even through their private Wan! I have a few questions that result, if someone is able to help you;

  1. I can't know if and what method of encryption is (is it AES etc.?) used on connections between towers and the WLC and what are the steps?
     1. The terminology can be a problem here, it's not a wireless mesh, just classic LAP for WLC
  2. EXTENSIVE customer network is already encrypted (IPSec VPN via VPLS) in parts - what is the consequence of execution of AP<-->WLC with end to end (if possible) on a network encryption EXTENDED with IPSec, i.e. double encryption?

  Strange but true - pointers will be greatly appreciated... Phil.C

  With a controller of the 4400 series, the control traffic between the AP and the regulator is already encrypted AES.  The user traffic is not encrypted.  If you use a 5508 controller all traffic between the AP and the controller is encrypted AES.

  For what is running the traffic through a VPN, it should work.  The issue I see with this is with the MTU in general.  The controller will drop all packets with a payload of less than 32bytes data.  According to the MTU over the VPN I've seen packets getting fragmented and it is a question.  If you use one of the versions CAPWAP (5.2 or newer) discovery dynamic MTU is part of the Protocol and this MTU problem does not really exist.

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us