no boot device - insert the boot device and press a key

Similar Questions

• Yoga 2 pro - lack of default boot device or startup failed. Insert the recovery media and press a key.

  Hello

  I have a Yoga pro 2.

  I recently formatted my drive and got rid of all partitions. The reinstalled windows 8.

  Everything worked well until I went into the bios and changed the legacy boot uefi support.

  I get this is now pop up when I boot.

  By default, lack of start-up or start-up device failed. Insert the recovery media and press a key. Then select "Boot Manager" to select a new device boot or boot recovery media.

  I have no support from reccovery.

  I tried to restart the mchine pressing F2, but I still get the same screen.

  If I press on enter I then move the pop up to the Boot Manager when the list is empty, so I can't start any other readers because there is not to choose.

  I don't know what else to do...

  Help, please.

  SEB

  Mod edit: System model added to the subject line to improve visibility / clarity

  Shut down the laptop computer

  Press the NOVO button to start

  Select Configuration of the BIOS in the menu that appears

  Return to the legacy

  Exit saving changes

  Restart and check.

• NO BOOT DEVICE - PLEASE INSERT the STARTUP DISK AND press a KEY ANY * please help *.

  I have a Compaq CQ-50 that worked very well. It has been upgraded to winows 7 Bonus a year ago. This is the message I get when I press the power button

  NO BOOT DEVICE - PLEASE INSERT THE BOOT DISK AND PRESS ANY KEY

  any help would appreciated more than you know

  Hello

  Have you tried to reinstall the hard drive if yes. Then the drive is bad & who has need of a replacement.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

• no boot found device, insert the boot disk and press any key

  Hello, recently tried to install Windows 10 through the Assistant Boot Camp, with the help of a DVD I bought windows. But I get an error saying "no devices found Boot insert boot disk and press a key" I tried to read and do all the patches, all offer and yet no results. Any suggestions or corrections us would be great!

  MacBook Pro mid 2012

  -i7

  Evo - Samsung 500GB SSD

  -Ram 16

  -Latest version of Mac OS x

  -L' use of 64 GB PNY flash drive

  Your Mac 2012 supported creating a USB Installer to help BC Assistant. Do not use a DVD, a USB Flash drive. Your USB drive must be a USB2 flash drive, if you choose the USB mode and you will need a Windows ISO.

  See also create an ISO image for Windows - Apple Support installation media Boot Camp .

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

  Original title: can't access my BIOS, but blocked on select boot device

  I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

  Hi Ryan,

  Please contact Microsoft Community. I will surely help you this question.

  To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

  Method 1:

  You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

  http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

  Method 2:

  If the problem persists, I suggest you to return the item and check if it helps.

  What can I do if my laptop Windows 7 or Windows Vista does not start?
  http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

  If the problem persists, I suggest you to contact the Toshiba Support for assistance.

  http://support.Toshiba.com/support/home

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

  Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

  Hello

  Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
  and Seagate Support.

  Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
  on the CD/DVD first in the boot order.

  Seagate - Support
  http://www.Seagate.com/support/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Windows 7 when I turn the laptop it says check cable connection pxe - mof: outgoing intel pxe rom no boot device insert boot disk and press any key

  Hello

   

  1. What is the brand and model of the laptop?

  2 have you made any changes to the computer before the show?

   

  Method 1:  Change the boot order in the BIOS settings:

  See the following steps:

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  (a) start on typing Dungeon either F1, F2, F10, Esc, or DEL to enter the BIOS Setup.

  Warning: some manufacturers use F10 for recovery of the system.

  (b) glance to "Drive Configuration", "Boot order" or similar

  (c) check the second drive the first boot device CD/DVD and hard drive.

  (d) to save the settings and exit.

   

  Method 2:

  Step 1: Trying to boot into safe mode and see if that helps.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If step 1 work, try step 2

  Step 2:  A clean boot to check if startup item or services to third-party application is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• How to fix error of bootcamp: no boot device - insert boot disk and press any key

  When I try to install windows using bootcamp No. bootable device - insert boot disk and press any key any that appears at the start of the installation of windows 10. any solution please.

  Thank you

  What is the year/model of your Mac?

• Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key

  
  

  Thanks for your help and please excuse my bad English.
  Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

  (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

  (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

  (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

  (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

  So I have 2 HDs identical with the same system on both drives, fully working and tested.

  (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

  (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

  (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

  (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

  Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.

• I screwed up trying to install windows on my computer 10 and I XE off installer and now its says "no boot device - insert boot disk and press any key".

  I was just trying to download 10 on my computer windows using boot camp assistant. I answered the questions for windows when you need to respond as what kind of language you use and then I messed up on one of the questions. I didn't know how to go back so I just pressed the red x. When I did that he must get off my computer and when it's done I got a black screen and then it says "No boot device - insert boot disk and press any key" I don't know what he meant by no bootable disk and I was hoping that you guys can help me fix.

  If stop you your Mac and your power it back up and hold down the Alt/Option key, you see a Windows selection? If so try to select and see if the installation will continue.

• No boot device - insert boot disk and press any key

  Hello

  I was with boot camp to install 10 Windows from a usb key. The first problem I encountered was an error message stating that Windows supports software could not be downloaded on my flash drive. I read that the necessary drivers could be installed later so I unchecked the box. The part of the installation, then training camp as it should (create a partition etc.)

  However, when the Mac went to restart and (probably) to start the program installation of Windows, the error message "No boot device - insert boot disk and press any key" displayed. My problem is the wireless keyboard does not respond and the light on this issue seems to suggest that it is not connected. My guess is that the drivers needed, such as Bluetooth are not there.

  I'd be happy enough to restart OS x and forget all about Windows, but I can't see how to get around this problem?

  A wired keyboard could work?

  any help is appreciated!

  Thanks in advance

  Max.

  A wired keyboard and mouse will work. If you try to install Windows and tried to download the Windows software on a wireless network, try a wired connection. to rebuild your USB Installer.

• Is "PXE - MOF: PXE ROM. exit" then below I don't get, "No Bootable Device - Insert Boot Disk and press any key any" why?

  I bought the lifetime windows, defender security system, I also downloaded the windows repair and ran it, I even cleaned my c drive and defragmented, but I always get the same black screen. This is what it looks like.

  PXE - MOF: Exit PXE ROM.

  No boot device - insert boot disk and press any key

  /} In this area here, I slash turns clockwise

  Does anyone know how planned it and most importantly, how to prevent?

  Try to change your startup settings for...

  1 CD-ROM
  2 USB
  3. HARD DRIVE
  4. (if available) floppy drive
  5 LAN.
  You can change it by pressing the button shown next to "Boot Order"

• HP Pavilion A6722SC: reboot and select proper boot device or insert boot media in selected boot device and press a key

  My computer has just stopped working and when I turned it on, it says I should change my hard drive. I did, but now the message is whenever I turn on my computer: reboot and select proper boot device or insert boot media in selected boot device and press a key.

  I have Hp Pavilion A6722SC. I have my 1st drive on the driver that I bought and I have the Boot Device Priority :

  1st boot Device [hard disk group]

  2 St boot Device [CD-ROM Group]

  3rd boot device [network startup group]

  4 rd boot Device [group Floppy]

  -> Disk Boot Priority group [not installed]

  -> Group of CD-ROM boot Priority [DSK02...]

  -> Group of HDD to boot Priority [DSK00...]

  -> Group network boot priority [not installed]

  I saw that many said I should disable the floppy, or I should have hard on the boot device 1 or driver, but this doesn't work for me. Someone who have solved problems of this kind? I need help!

  Thanks in advance.

  Sorry for the bad spelling.

  I needed a new OS... I had Windows Vista and I can't install it more, so I have to buy a new OS.

• ASUS computer Unable to boot error "Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key." "

  Original title: ASUS computer problem

  This morning I slammed my hard cutting computer. This afternoon, when I went to get on a black screen appears and says "Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key." When I go to press the same message poping maintains and does not allow me to go anywhere else. My computer also makes a click when I try to restart. Any suggestion would be appreciated. Thank you.

  Adam

  The 'Ticking' noise is indicative of an HD program.  You can made a brick out of it.  The Message on the selection of the appropriate boot device indicates the tilt of the computer 'See' the HD.

  You see the HD in the BIOS when you start?