Display a message using #SUCCESS_MESSAGE #.

Similar Questions

• All the sites SSL Web I visit displays the message "this connection is untrusted" and shows me a false SSL certificate for a different domain name.

  When I visit a Web site that requires SSL I displays the message "this connection is untrusted". Any Web site that I visit, it's always exactly the same message and the same SSL certificate that she is no longer valid for www.thawte.com

  support.Mozilla.org uses an invalid security certificate.

  The certificate is not approved, because no sender string has been provided.
  The certificate is valid for www.thawte.com
  The certificate expired on 11/11/2011 23:59. The time now is 11:46 28/01/2012.

  When I click "Add the Exception" on a Web site and view the certificate, it is exactly the same certificate with the exact same serial number.

  I had a similar problem with Internet Explorer showing a 404 error when I visited SSL protected pages but to do a restore of the system a month ago to correct this. All other bowsers are / were very good.

  I installed Firefox 3.x month last to test something that is when the problem started. I have since uninstalled Firefox 3.x and reinstalled the latest version. I deleted all the preferences/settings, disabled modules and reinstalled many times. I did a Windows system restore to before that the problem started with no luck.

  The time / Date on my computer are correct. I have no firewall other than the windows one. I had no antivirus (netbook) until I installed a (Avast) yesterday to see if a virus was causing issues (found nothing). This problem arises on any internet connection (tested to work and home).

  Try bypassing the caveat

  or try to use the module Skip Cert error (to jump to the SSL/TLS certificate error page)

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• How to: display a message while for loops, with no required user input

  Hi everyone, I'm relatively new to LabView, using 8.5.

  I want to display a message all in one for the loop runs, requiring no user input to delete the dialog box (that is to say, the box disappears after the end of the loop For).

  Any ideas?

  Thank you

  Darren

  
  

• Display a message to a user in a while loop

  Hello.  I've been using Labview for about 4 days and I have this preface saying that it is a homework problem, I'm not looking for an exact solution just someone to point me in the right direction.  I need to display a message to a user.  The problem is that, since it is within a while loop, when the condition is met for the notification to display, it just returns to the top and never let the user change the values to correct the problem.  It should be pretty obvious that the vi is supposed to do by looking at, and everything else works fine, until I put the message in it.  As an aside, I know that there are probably much better ways to accomplish the tasks that I decided to do about it, but as I said, I am completely new to LabView, so I apologize for the most elegant programmers out there for my brute force programming!  I searched the forums and found a few things about statements of case and registers at offset, but I have no idea how to use.  I have on this part of the problem, worked for hours now and make me nowhere, so any help will be really appreciated.

  Welcome to the Forums!

  First of all, thanks for pointing out that this is a homework problem. We mind helping people learn LabVIEW but oppose when someone is trying to put his homework for him.

  Statements of case and shift registers are probably what you need to learn next. Specifically, a state machine is probably well suited for this type of program. I think that your LV version came with a template or design for a state machine model. Look under the menu file > New... (No new VI) and see if you can find a state machine model.

  Other comments:

  -If you don't use a structure of the event, and then put a (ms) waiting inside the loop so it doesn't turn thousands of times per second that does exactly the same thing each time until the user changes a control.

  -In line and force? will make the comparison and select lower left and upper right part of your VI.

  -Force the amount entered for the multiple of 5 cents is OK, but can be confusing to the user trying to get 3 cents. A note on the Panel or a bunch of advanced control may be useful.

  Lynn

• SyncUp software displays the message "SyncUp has stopped working".

  SyncUp software displays the message "SyncUp has stopped working" what can I do to fix this? Thank you

  Hello

  1. what operating system are you using on your computer?

  2. What is the brand and model of your computer?

  3. it worked very well on your system before? If Yes, you did it all software or hardware change before the show?

  Method 1

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2

  Uninstall and reinstall the software SyncUp.

  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Note: Uninstalling the software will erase all the data associated with it. You must redo all favorite and set up anywhere after settings put it back.

  THIRD PARTY WARNING: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the following help link:

  http://en.community.Dell.com/support-forums/software-OS/f/3526/t/19391777.aspx

  It will be useful.

• Display a message to the main user of sub vi VI

  Hello

  I have a question which I'm sure he has met before, but I couldn't find it via the function or search with Google.

  On my main vi, I have a link to a sub vi, this subroutine vi check something and then displays a message to the user. The next step in the sub VI depends on what users on the input message is. But when I run my main vi, that the display (of course) is not, because I do not have a link between the two.

  Is it possible to send the message to the main vi and return the action the slot vi?

  Thank you

  Given that everything that happens in the sub vi, why would you go back to the main vi?

  Do you use the express vi "Prompt the user for entry" to get an input from the user?

  Can you post your code or make some dummy vi to visualize your problem?

• Display a message to the user w / result of data

  Howdy,

  First off it is a mission of the College work and it's especially complete; seeking advice and the experience here.  The mission is to create a calculator with many functions for each method of arithmetic.  It was easy enough, but the next step is to display a message to the user after each calculation.  For example, if the problem was 4 + 2, the message must be "the result of the addition is: 6. the creation of the part of the message by using the Msg to display the user-defined function is simple, but it is not exactly struck home.  I want to create a message that contains the result of the problem (for example 6).  As it is now I can't do that with the function of Msg, or if it is possible I can not quite understand.  I want to have a separate message for each function, but I don't know if I can incorporate the response into the message.  It's the underlying objective; How to integrate the response in a message dialog box to the user? If it is possible what should I watch?

  The VI himself is quite simple; case of structure for each arithmetic function and a certain time for execution loop.  X and there are entries and a drop-down list to select a structure if necessary. I've attached a screen below.

  Thank you

  

  THA

  You can use the Message to display to the user to view any string to the user. If the key is to use the palette of the chain to manipulate strings to get the error message.

  A subpalette of the palette of the chain is the range of number/String Conversion. This can help you get your (6) value into a string format and then you can concatenate that string however wished with the message.

  With the pop-up windows, you must make sure that you're not trigger this popup with every single loop, so make sure you put a case around the pop-up structure and place the logic in there to make it work only the case of popup when the value changes.

• my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.

  my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.

  Hello

  1. are you able to use with other applications that connect to the Internet?

  2. when exactly you get this error message?

  3. should we come up with any specific Web site?

  4. what version of Internet Explore do you use?

  5. don't you make changes to the computer until the problem occurred?

  6. the problem occurs in safe mode with networking?

  I suggest you follow the methods listed in order of appearance in the following Microsoft KB article:

  How to optimize Internet Explorer:

  http://support.Microsoft.com/kb/936213/no

  Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.

  For your reference: Internet Explorer could not open the Search Page.  http://support.Microsoft.com/kb/219004

  Hope this information is useful.

• Outlook Express take up to 2 minutes to display the message in the preview area

  Using XP Home Edition with SP2 and SP3 more latest updates
  in Outlook Express

  Go about 9 Aug 2011 no message in the Inbox
  When clicked takes 15 seconds to reach
  120 seconds (if the email has a large number of .jpg
  or .gif inbed in enamel - largest number the
  It takes longer) for the message to display in the
  Preview. and
  Outlook Express client is totally locked
  until the content is downloaded and displayed in the
  section preview pane with the exception of the high-low-close
  and while you wait for the message to display the
  bottom of the preview pane area is a shade of temperature
  gray.
  For example, I get the
  Download all the days of the show Kim Komando
  Newsletter which has a lot of photos you need now
  on a 60 seconds to display when it used to take
  5 to 10 seconds. However, if unplug
  form Wildblue.net my ISP (POP3, SMTP)
  then click on
  the email appears in the preview pane on
  5 seconds, but everywhere in the email
  where there should be a picture box with
  a red X in a box (not shown) with all the text
  différance and visible.

  Before September 9, 2011 I click send/receive to get
  the list of emails form the Wildblue (perhaps gmail)
  Server.
  Once the list has been uploaded they afficheraient
  above the pane viewing and when I clicked everything
  Individual email, the text would be displayed with a
  a few seconds and an image (.jpg, .gif etc.) would be
  have an empty box and would be downloaded while
  I was reading the text and the Outlook Express client
  was NOT completely locked or I would be able to
  Select another email or go ahead and just delete
  without having to wait to be able to download all the
  photos but NOT since September 9, 2011.

  ALSO

  Since September 9, 2011 once waited for 1 to 2 minutes
  for the message to be displayed if I click on another return
  Let's say for the daily download The Kim Komando Show
  then return to the daily download The Kim Komando Show
  in a few minutes complete the electronic text and photos will be
  view wihtin a few seconds HOWEVER if I wait for an hour
  or so it will take more than a minute display but
  the bottom of the preview pane will be totally white - not grey
  and the Outlook Express client will be totally
  behind closed doors until it downloads once more photos.
  Technical support WildBlue say it is a MICROSOFT PROBLEM
  what they told you to this topic
  and after talking to your support, I agree that you
  MICROSOFT changed something in one of your
  updates that made Outlook Express almost
  unsuable.
  FIX IT!

  1: do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express
  http://support.Microsoft.com/?kbid=903095

  2: after you are done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  3: delete the temporary Internet files:

  For IE6: In IE | Tools | Internet Options | Remove the files button. And check the delete offline content.

  For IE7 & IE8: Tools | Internet Options | General tab | Browsing history | Remove button. Select temporary Internet files.

  4:disable e-mail in your anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  For some programs, turning it off is not enough. You may need to uninstall and reinstall in custom Mode and remove the analysis when e-mail messages.

  5: download the free version of this tool. First check the updates and then run a full scan.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

• How to display a message on the second tab when an option is selected in a drop-down

  Hello

  I use a combo of my title bar, to within my application to display a list of options that will trigger different URL webViews.

  On my first tab I have a Web of a page view and when the option is selected the webView will change and the second tab will load the same webView but with /deals at the end of the url.

  The problem I have is that one of the options does not have a page of /deals on their site so I was wondering if it would be possible to hide the second tab or display a message on the second tab, when this specific option is selected?

  Thanks in advance

  If your problem is what method to use to hide the tabs or what...

  You can use these functions... It will remove the tab but will not destroy the content, it's like hiding and showing a tab

  REMOVE / HIDE

  tabbedPane.remove (theTab);

  ADD / VIEW

  var index = 2; the tab index

  tabbedPane.insert (index, theTab);

• Display a message in the main method.

  Someone knows how to display a message in a dialog of the main method (before the creation of the Application object)? It is a background application is not possible to put the message on a screen.

  You can use Ui.getUiEngine () .pushGlobalScreen () to display a screen for a user interface application.

• Display a message on the device

  Hello

  I use "System.out.println ()" in my code to display a message on the screen of the actual device, but I get the message in the window to debug during the simulation output. Please notice that if I push the application on the device using BES, I get the message on the screen of the device. If not, then what is the code to use to display a simple message on the device itself?

  BlackBerry JDE 4.5.07 with Smartphone BlackBerry 2.9.0.60 Simulator

  Thanks a lot for your help

  Give a glance to the Dialog class.

• BlackBerry Smartphones ALT/O command to display the messages does not work on 7.10; Anyone know another shortcut?

  ALT/O command to display the messages does not work on 7.10; Anyone know another shortcut?  I know that I can get all messages sent via Options, but too heavy to do it and then cancel it.

  do an advanced search using the options. Once you are satisfied with it, you can save it and assign it to Alt - O.
  If you do this, remember to remove any other shortcut search which may exist.

• Check invalid date and display error message for that forms 10 g or 12 c

  Hi all

  a text element text_fdate is of data type date mask and the format is dd/mm/rrrr

  In this text element that I want to display validation message "you have entered an incorrect date that does not exist.

  When the user enters an invalid date as 30/02/2016 which is not exists.

  What trigger I use and when.

  Florian wrote:

  Hey Hamid,

  GET_ITEM_PROPERTY ('ITEM_NAME', ITEM_IS_VALID);<--it is="" not="">

  Above will work only on the query mode.

  The code works, but the below error code you gave does not work in forms 12 c.

  1. IF ERROR_CODE = 50012 THEN
  2. MESSAGE ("Please enter the correct date.");
  3. MESSAGE ("Please enter the correct date.");
  4. END IF;

  The correct error code is 50004 12 c forms.

  Just change the ERROR_CODE of 50012 to 50004 and it will work.

  I'll check the error code in form 10g and will play with you again.

  I already checked and functional at 10g.

  Hamid

• A single application preventing the closure of the displayed error message...

  Hello

  When I closed my laptop, the displayed error message one application preventing closing down.

  as directed by your previous post, I have set up my laptop with it, but this problem yet and still occur.

  now the error message saying Windows host prevents your stop down.

  Please, help me to overcome this problem.

  Hi Regis,

  Thanks for posting your question on the Microsoft Community forums.

  I understand that you get the error message so that the closure of the system. However, I would like to know some more information on the issue to provide you with better assistance.

  1. Who is "previous post" you are talking about?
  2. What is the exact error message you get now on "Windows"host?
  3. You did it any significant hardware or change software on the computer before this problem?

  The question may arise if certain services (including background Windows services and other third-party application services) are still in operation when you try to shut down the computer.

  The applications or programs sometimes have ongoing services which are still ongoing even if you close your programs. Properties of an instance, there are many third party messengers that require you to sign in to use the application. Thus, when you close the application, the corresponding services are sometimes even functional whereby the program restarted in less time and log into the self-signed.

  Therefore, usually do not completely quit us some programs when we literally close them and so we get these guests. To diagnose the problem, you can restart the computer in safe mode when only minimal services are in use, you should not get these guests so that closing.

  If you do not get these guests in safe mode, you can also try to boot your system in a clean boot, a selective startup in the third that most of the services are disabled. To do this, you can consult the following link:

  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Hope this information is useful. Let us know if you need additional help on the issue, we will be happy to help you.