Display Client 5.0.1 not auto adjust / resize the display resolution

Similar Questions

• Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

  Hello

  I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

  I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

  I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

  I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

  Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

  I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

  Thanks in advance,

  Alan

  PROBLEM SOLVED!

  It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

  Thanks again to all who have suggested things.

• Am not able to resize the fonts, images, or anything that is related to the use of numbers.  How can this be corrected?

  Am not able to resize the fonts, images, or anything that is related to the use of numbers.  How can this be corrected?

  Hello

  Is this a problem of input in any number?

  All applications (such as Notepad) do have the same problem?

  Is your Num Lock?

  Brian

• Staples does not auto adjust to fit timeline

  I've always had clips of mounting auto adjust to stick next to each other, but for some reason, he has stopped this... can someone please tell me how I can get it to do it again?

  Click on the snap "magnet" in the top left of the timeline.

• Hello. I'm not really gifted computer by all means, please bear w / me. But how do you adjust/resize the title bar and all options under? (File, Edit, View, history, Favorites, tools, help)

  I've adjusted the screen resolutions for my monitor and now everything is clear/more sharper, but now smaller. I adjusted the size for the icons, fine. A the same for the size the text/font/zoom, and everything has changed except options I have mentioned beforehand. All options (file, publishing, display, etc.) are always the same size, tiny and very difficult to see. Please help and I appreciate all the answers.

  Thank you very much.

  Try this add-on.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/theme-font-size-changer/

• Height of the page not automatically adjusts when the drop down menu expanded

  Using Adobe Muse CC 2015 on a Mac, I created a Web page for my company (www.unafilm.de).  I used a horizontal menu in the master page to the layout of the pages of the subsites (news, movies, about, contact, etc.) to visitors. Everything works well except a menu items which is supposed to display an another 25 points / subpages.  They expand nicely, but I can show all because the height of the page does not take into account the length of the drop-down list. So, I can only see subpages on this particular menu point that allows at the height of the page. The page does not extend and I can also not scroll down.  No idea why? Thanks in advance.

  Is nothing, that you can change. It is simply how browsers work. Unless you want to annoy your customers with a browser window resizing script (bad idea), the window is not adapt. 25 menu entries using is perhaps not the best idea at first, anyway.

  Mylenium

• JavaScript does not update/adjustment of the value of the point

  I currently have the function in my header html

  <script language="JavaScript" type="text/javascript">
  function rfc_emergency()
  {
  if ($v('P3_TARGET_COMPLETE_DATE') <= $v('P3_EMERGENCY_DATE'))
  {
  $v('P3_PRIORITY_EMERGENCY').value = 'Y';
  alert("this will be classified as a priority");
  }
  }
  </script>

  and I have this in the form P3_TARGET_COMPLETE_DATE html element attribute
  OnChange = rfc_emergency (this);
  
  I know the date by comparing work and I know $v('P3_PRIORITY_EMERGENCY').value = "Y"; is ongoing because I'm alert to work. My problem is $v('P3_PRIORITY_EMERGENCY').value = "Y"; in fact, does not appear to do anything. My radio (P3_PRIORITY_EMERGENCY) button remains unchanged. Any suggestions as to why P3_PRIORITY_EMERGENCY is not to 'Y '?
  
  I'm running 3.2 and I apologize for not having much experience with the java script.
  Thanks in advance.

  My mistake - missed you ask on an option button - they are more delicate with javascript because they are stored under a range of choices, then a simple $x () .value won't.

  You can also make use of $s () to set the value of the elements of the ApEx, which is actually cleaner than $x () .value as it automatically represents the different types of items:

  $s('P3_PRIORITY_EMERGENCY', 'Y');
  

  Hope this helps,
  John

  If you find this information useful, please do not forget to mark the 'useful' or 'correct' post so that others benefit as well.

• I'm not able to change the screen resolution it is stuck on 640 x 480

  I am not able to change the resolution of the screen that he is stuck on 640 x 480, that the slider will not slip and the color is stuck on 16-bit
  It's the 32 bit version of vista home premimum I have a 19 in monitor and resolution needs to be changed in order to display pages of the stuff are extremely too big

  Go to the website of your computer manufacturer > drivers and downloads Section > key in your model number > looking for graphics/video drivers Vista > download/install the.

  If this does not resolve the problem, you have a hardware problem with your integrated graphics, or your graphics card.

  At this point, contact the manufacturer of your computer.

  See you soon.

  Mick Murphy - Microsoft partner

• How automatic adjustment of the screen resolution?

  Howdy,

  CS5 ACE 2.0

  Sorry if this is discussed elsewhere. I couldn't find an adequate response. Feel free to point me in his direction.

  I wish that my flash file on "auto size" itself to any resolution of the screen. Is it done through the .fla/AS or edit HTML? As a gift, SharePoint is pulling up the html file.

  Thanks for any help!

  It depends on what you want to achieve.  Why don't you try all scaleModes with a few things on stage and see what you like the most.

• I can auto adjust all the blocks of text with overset text?

  Due to several factors (change computers, versions of different fonts, etc.), I had to change most of the fonts in my text-heavy document.

  There are a lot of charts and tables in this 125-page document, and now most of all text frames have overset text.

  The new font is in fact identical to the previous one, however, there are a few differences that are causing it take more text frames. I tried to adjust the line spacing in my character and paragraph styles, but these do not seem to effect.

  Is there a way to automatically adjust all frames in excess to account for the new font?

  Thanks in advance.

  Not sure that the result will be 100% desirable, but there is a way to define all frames to auto-size...

  Run find/replace and choose the tab object.

  Down, choose the Document research: menu. Choose the blocks of text such as: menu.

  Click the icon of glass/frame next to the search Object Format field:

  

  In the Options of Format object search dialog box, choose Auto setting 'Off' on the text size Options > menu automatic sizing:

  

  Click OK, and then click the icon / window next to the subject of change Format field:

  

  In the change object Format Options dialog box, choose 'Height' only on the text size Options framework Auto > auto-size menu, and then click the up button in the Center in the framework - pinning proxy:

  Note: Another option for pinning would be better according to your presentations, but this setting will make executives grow at the bottom, which seems the most logical... in most cases.

  

  Click OK, and then change all.

• Auto adjustment of the text in text boxes

  Is it possible to tell a text box to the automobile shaped his text? What I mean is that when I change the size of a font to something smaller than the text box remains its old big man. It is a problem because when I want to align this text on several other areas of text which went through a similar treatment, the alignment will take into account the size of the full box and not only the text.

  So basically, I have to go and manually shorten each text box. Which is a pain when you have to deal with a lot of text. Y at - it a script or a button/option, I don't know that auto fit the box constantly?

  Thank you

  There is an autoSize property that you can set for a dynamic textfield, but if you talk to adjust sizes if you change a file, which will be drowning do anything for you.

• (hp envy 13-j000na 2 x) does not auto-rotation of the screen after upgrade to windows 10

  I can put in power 'Rotation lock' and "tablet mode" in the center of the action, but this does not help.

  I have noticed that after the last MS updated (KB3093266), auto-rotation started working even after a restart of the tablet. In Device Manager, the device driver Simple guidance is installed. For the moment, I think my problem is solved.

• DV6Z will not Auto-Connect to the Wi - Fi connection

  HP Pavilion dv6z
  Windows 7 Home Premium

  When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

  Thank you!

  GP_01 wrote:

  HP Pavilion dv6z
  Windows 7 Home Premium

  When I turn on my laptop, it does not automatically connect to my wi - fi. I have to manually start HP Connection Manager. Someone knows it how to make auto-start and are there negative effects of uninstalling HP Connection Manager? I don't want to.

  Thank you!

  You don't need any software HP Connection Manager or Assistant wireless HP as for automatic wireless connection. Uninstall it reboot and you connect to the network using Windows network and sharing Center...

• Music library is not auto-implementation update the Moden UI my music app

  When I copy a new song through the file Explorer in the My Music folder, it does not autoupdate my music on the application list music Xbox. I already closed the app and rebooted to see if that solved the problem. Also, I restarted the Surface to see if it would help without result. Anyone know how to make the my update of list of music in the music of the Xbox?

  You can try this: go to the control panel (via desktop computer) and open indexing options. Tap advanced. Type on rebuild. According to the number of files you have, you may need to wait a while, but the window will eventually display full indexation.

  Then, open the music application and see if your song had appeared.

• several tabs do not auto load until the user clicks

  OK, I have a lot, a lot of tabs open all the time. forever. but in the end I have to restart the computer and use 'restore previous session', now, I do not want each tab to load, (50 videos youtube playing at the same time), so it's easier physically turn off the Internet, then have each tab crash, and then turn internet and just refresh a tab I want to see.

  This used to work fine on old firefox, but now when I use restore previous session all the tabs not loading. I have to click on each of them, and then they hang on loading continuous until I hit 'stop', 'Refresh '. tab next stop refresh, next tab stop refresh, next tab stop refresh...

  I hope that makes sense, I want my 100 tabs + crash at startup when I unplug my ethernet cable.

  Have you tried to reload all tabs via the context menu when they are disconnected from the internet if that's what you mean?

  Firefox can still load pages from the cache, but should not be able to play videos.

  See also:

  • Tools > Options > general > startup: 'do not load the tabs until you have chosen.

  There are some prefs to control this behavior.

  • Browser.sessionstore.restore_on_demand
  • Browser.sessionstore.restore_pinned_tabs_on_demand