Display data table in a chart

I created a vi that filters data based on the number of comparison (see attached vi). I can't however my table filtered data to display on a graph, with the time/data in the table yet.

I've also attached the data file, if it helps, I used to test my program.

Any help is always appreciated.

Chaz

Here is all of this.

I hope this helps

Tags: NI Software

Similar Questions

Time series graphics display data inappropriate for a continuous analysis
Hi all
I've marked in months as chronological key in my MDB layer, but I still cannot display data correctly in my chart of time series, because it shows data for analyses continuously when you create the chart. Can someone help me with the same.

Thank you
What type of data is your key? The chronological key is required for time series formulas (there etc.).

The time series graph requires a date or datetime data type work - maybe a new column with the first of the month / help? Kind regards

Robret

Dynamic display of data table
Dear community,

I have the X TABLE, which contains a set of data rows/records.

These records have different 'Status', defined as a "rejected", "approved" or "pending".
What is the most logical version to have a view just for pending, rejected, or approved.

I tried to create an action dynamic in combination with 3 buttons named "Refused to show", "Approved for the Show", "Show pending" and the SQL table.
```
select balbalbla from blabla

where loggeduser = :app_user
and status in ('Pending')
```
but this is the only data containing the status 'pending', is well, but how do I fix the SQL when I refused and also approved?
What I really want is

When you press the X button, A table will display data X
When you press the button, A chart data
When the key Z, table A indicates data Z

Sincerely,

Mere student :)

Published by: Netrunner on June 1, 2012 09:14

Published by: Netrunner on June 1, 2012 09:14
Netrunner wrote:
I created a hidden field named P11_DYNAMIC
I created a dynamic action as follows: true action when you press button "Show pending" > launch plsql code >: P11_DYNAMIC: = 'pending ';
I created a dynamic action as follows: true action when "Refused to see" touch > launch plsql code >: P11_DYNAMIC: = "declined";
I created a dynamic action as follows: true action when 'Approved for the Show' button > launch plsql code >: P11_DYNAMIC: = 'approved ';

but nothing is happening, unfortunately. The buttons are all managed by the dynamic action of course.

After that you press a button you refresh the report in the region?
If not change all over the dynamic actions > add real action > event (refresh) > Type (region) > select report region
This will refresh your report once the value is defined in P11_DYNAMIC

When I press the buttons of the value does not change in P11_DYNAMIC, and the table also unresponsive.

How you came to the conclusion that the values are not?

Clickable bar or data tables charts
Hello

I displays a chart and a table of data for an account of some statutes. : Example A 10, B status: situation C, 30: 40.

I would like to know if there is a way to make these graphics to bars or data table lines clikable, so I can go down in the State to get detailed information. Example, by clicking on the status bar or line in the data table, I would like to redirect to another page where I can show more details such as all users who belong to State A, etc.

Please suggest.

Thank you
Pradeep
Hello

For a chart, you need to include a link rather than the null link. For example
```
select
'f?p=&APP_ID.:21:'||:app_session||'::::P21_DB,P21_SCHEMA:'||OEU_ID||','||OET_TBL_OWN_NM||':' link,
"OEU_ID"|| '-' ||"OET_TBL_OWN_NM"  label,
COUNT("OEU_ID") value1
 from "IBU_DBRTUT01"
```
APP_ID.:21 means that he runs on page 21
P21_DB, P21_SCHEMA are hidden on this page elements that store values (you need to create your own)
*|| OEU_ID | «, » || OET_TBL_OWN_NM | * the values from the graph

Paste the part of link in your series and then just edit these pieces. Then you must create items hidden on the page you want and do a query on this reference page the items hidden in a where clause clause

For an interactive report you click a column (in the attributes report) attributes, and then pass the "links" section by passing values for the items you want.

Mike

Published by: Gerd on October 21, 2009 10:08

How to display date information in a data log table

Hello

I want to display data during the data acquisition process. How can I add the time stamp as one of the column in the Table of 'results' located bottom left of the sample code?

Thank you

Ryan

Here is an example of the use of ordinary table instead of the express. You will need to convert your dynamic data to a scalar with the dynamic data conversion function.

query to display data in table with several detail table

Hi all

I have a few cases with a table header that have more than 3 table of detail, and I have to generate the query to show all the data horizontally.

tblHdr have column A (PK)

tblDtl1 have column A (FK), B (PK)

tblDtl2 have column A (FK), C (PK)

tblDtl3 have column A (FK), D (PK)

and I need a query to display data like this:

A	B1	C3	D1
A	B2	C4	D2
A		C5	D3
A		C6

all the Details of the table should display data based on the relationship of tblHdr (A).

tblDtl1 have only 2 rows of data for the FK A

tblDtl2 just for FK 4 lines of data

tblDtl3 only 3 lines of data for the FK A

Another example:

A	B1	C1	D1
A	B2	C2
A	B3

tblDtl1 only 3 lines of data for the FK A

tblDtl2 have only 2 rows of data for the FK A

tblDtl3 have only 1 rows of data for the FK A

Please shed some light. for the record, I'll use this query in ADF, so I'll put using PLSQL in second priority. I prefer to do it in the SQL query.

Thank you

Here are 3 ways. First test of data:

drop table ta purge;
create table ta as
SELECT 'A' AS A FROM dual
union all
select 'B' from dual;

drop table tb purge;
create table tb as
SELECT 'A' AS A, 'B1' AS B FROM dual
UNION ALL
SELECT 'A', 'B2' FROM dual ;

drop table tc purge;
create table tc as
SELECT 'A' AS A, 'C1' AS C FROM dual
UNION ALL
SELECT 'A', 'C2' FROM dual
UNION ALL
SELECT 'A', 'C3' FROM dual
UNION ALL
SELECT 'A', 'C4' FROM dual ;

drop table td purge;
create table td as
SELECT 'A' AS A, 'D1' AS D FROM dual
UNION ALL
SELECT 'A', 'D2' FROM dual
UNION ALL
SELECT 'A', 'D3' FROM dual;

Now 3 solutions: full join, group by and pivot:

with b as (
  select a, b,
  row_number() over(partition by a order by b) rn
  from tb
)
, c as (
  select a, c,
  row_number() over(partition by a order by c) rn
  from tc
)
, d as (
  select a, d,
  row_number() over(partition by a order by d) rn
  from td
)
select a, b, c, d
from ta left join b using(a)
full join c using(a, rn)
full join d using(a, rn)
order by a, rn;

select a, max(b) b, max(c) c, max(d) d
from (
  select a, null b, null c, null d, 1 rn
  from ta
  union all
  select a, b, null, null,
  row_number() over(partition by a order by b) rn
  from tb
  union all
  select a, null, c, null,
  row_number() over(partition by a order by c) rn
  from tc
  union all
  select a, null, null, d,
  row_number() over(partition by a order by d) rn
  from td
)
group by a, rn
order by a, rn;

select A,B,C,D from (
  select 'A' tab, a, null val, 1 rn from ta
  union all
  select 'B' tab, a, b,
  row_number() over(partition by a order by b) rn
  from tb
  union all
  select 'C' tab, a, c,
  row_number() over(partition by a order by c) rn
  from tc
  union all
  select 'D' tab, a, d,
  row_number() over(partition by a order by d) rn
  from td
)
pivot(max(val) for tab in('B' B, 'C' C, 'D' D))
order by a, rn;

A	B	C	D
A	B1	C1	D1
A	B2	C2	D2
A		C3	D3
A		C4
B

Personally, I would prefer to view the data by using a 'join the union', in order to avoid the impression that the different detail records are related somehow.

select ta.a, b, c, d
from tb full join tc on 1=0
full join td on 1=0
right join ta on ta.a in (tb.a, tc.a, td.a);

A	B	C	D
A	B1
A	B2
A		C1
A		C2
A		C3
A		C4
A			D1
A			D2
A			D3
B

Using the procedure to display the table of multiple data

Hi, I need help for the procedure in oracle
I want to create the procedure to display the table of multiples with sample plan
with a parameter imployee_id to display an employee_id, name, function, start_date, end_date
IAM using this query to select more than one table
SELECT e.employee_id, e.first_name, j.job_title, h.start_date, h.end_date
E EMPLOYEES
JOIN j jobs
ON j.job_id = e.job_id
JOIN the job_history:
ON h.employee_id = e.employee_id
WHERE e.employee_id = 200;
Thanks for the help

Blu and Billy showed you the 'real' solution. You can display the data returned by a cursor ref in SQL Developer, too:

http://www.thatjeffsmith.com/archive/2011/12/SQL-Developer-tip-viewing-refcursor-output/

Yet as a duty for a beginner is generally do not have the expected solution. Usually, teachers want to see you using a LOOP and dbms_output. something like

DECLARE

Xy CURSOR IS

SELECT whatever

As much as;

BEGIN

FOR r IN xy LOOP

dbms_output.put_line (r.col1 |' # ' | r.col2);

END LOOP;

END;

Of course this suggestion will inaugurate a discussion abusing DBMS output but I keep my position that it is authorized to use it for learning the basics.

Limited data display in a candle stick chart
Hello

I just created a candlestick chart that should show daily data over a period of three months, that the challenge is its just displaying data for 15 entries. Please, do something good or is this a limitation of the apex.

Thank you

Remi
Hi Remi,.

There should be a 'maximum lines' in the area of your chart by default to 15 lines, try a higher number assignment.

Aaron

error displaying the tables of mysql in the data Panel
I try to display the tables on my local mysql (MySQL 5.1 v) database. I get this error in the data panel when I develop the tables:

"When executing getComponentChildren in Connections.htm, the following JavaScript error has occurred:
"On line 64 of the file"C:\\...\Dreamweaver 8\Configuration\Components\Common\Connections\ConnectionsCommon.js": TypeError: dwscripts.isDateDBColumType is not a function".

When the elements of array must be listed, I just see a branch that says "Loading"... "and it just sits there. I have the 8.0.1 update installed and just cannot know what the problem is. I have several installed extensions (especially WebAssist and a few others).

Someone knows what to do to fix it? Am I missing some info compatibility?

Thank you...
Good goooollllleeee. Reinstall Dreamweaver seemed to do the trick.

Now, to reinstall the extensions and see if it was one of those who killed my previous installation...

Unable to display data for the date where there is no entry in the table
Hello

I need a urgent, described below:

I have a table named as 'dirty', consisting of three columns: empno, sale_amt and sale_date.
(Please ref. The table with data script as shown below)

Now, if I run the query:
"select trunc (sale_date) sale_date, sum (sale_amt) total_sale of the sales group by order trunc (sale_date) by 1.
It then displays the data for the dates there is an entry in this table. But it displays no data for the
date in which there is no entry in this table.

If you run the Table script with data in your schema, then u will see that there is no entry for the 28th. November 2009 in
sales table. Now the above query displays data for the rest as his dates are in the table of the sale with the exception of 28. November 2009.
But I need his presence in the result of the query with the value "sale_date' as '28. November 2009 "and that of"total_sale"as
« 0 ».

Y at - there no way to get the result I need?

Please help as soon as POSSIBLE.

Thanks in advance.

Create the table script that contains data:
------------------------------------------

CREATE TABLE SALE
(
NUMBER EMPNO,
NUMBER OF SALE_AMT
DATE OF SALE_DATE
);
TOGETHER TO DEFINE
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE (DECEMBER 1, 2009 10:20:10 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE (NOVEMBER 30, 2009 10:21:04 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE (NOVEMBER 29, 2009 10:21:05 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE (NOVEMBER 26, 2009 10:21:06 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(100, 1000, TO_DATE (NOVEMBER 25, 2009 10:21:07 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 5000, TO_DATE (NOVEMBER 27, 2009 10:23:06 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 4000, TO_DATE (NOVEMBER 29, 2009 10:23:08 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 3000, TO_DATE (NOVEMBER 24, 2009 10:23:09 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(200, 2000, TO_DATE (NOVEMBER 30, 2009 10:23:10 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 7000, TO_DATE (NOVEMBER 24, 2009 10:24:19 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 5000, TO_DATE (NOVEMBER 25, 2009 10:24:20 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 3000, TO_DATE (NOVEMBER 27, 2009 10:24:21 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 2000, TO_DATE (NOVEMBER 29, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
Insert into SALES
(EMPNO, SALE_AMT, SALE_DATE)
Values
(300, 1000, TO_DATE (NOVEMBER 30, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
COMMIT;

Any help will be necessary for me

Kind regards
```
WITH tab AS
  (SELECT TRUNC(sale_date) sale_date,
    SUM(sale_amt) total_sale
     FROM sale
   GROUP BY TRUNC(sale_date)
   ORDER BY 1
  )
 SELECT sale_date,
  NVL(total_sale,0) total_sale
   FROM tab
   model
   REFERENCE refmodel ON (SELECT 1 indx, MAX(sale_date)-MIN(sale_date) AS daysdiff , MIN(sale_date) minsaledate FROM tab)
     dimension BY (indx)
     measures(daysdiff,minsaledate)
   main main_model
   dimension BY (sale_date)
   measures(total_sale)
   RULES upsert SEQUENTIAL ORDER ITERATE(1000) until (iteration_number>refmodel.daysdiff[1]-1)
   ( total_sale[refmodel.minsaledate[1]+iteration_number]=total_sale[cv()] )
ORDER BY sale_date
```
using a clause type

Ravi Kumar

Display data from the database in a table
Hello

How to display data from my database in an ADF table using a backing bean? I created an arraylist in the bean, but only the last row of my query is displayed in the table...

Thank you...
Hello

Create a simple Java class that implements Serializable. Create attributes that represent each column in your table. This class represents on the row of your table. A list of these objects, and you can fill your af:table.

Visit this link below for an example.
Re: Is it possible to create a static array of ADF and the tree?

Kind regards
Amélie Chan

display data in a tabular format

Dear Sir

I followed the example on

http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800508/...

which really helped me to solve the problem of New York.

now my data shows but its display twice.

Here is my code to display data.

for (int count = 0; count)< 4;="">
{
ranks [count] = new VerticalFieldManager(VerticalFieldManager.NO_HORIZONTAL_SCROLL |)
VerticalFieldManager.NO_VERTICAL_SCROLL);

Add 21 rows of data in the column
displayData = this.split (data, ' |');
for (rowCount int = 0; rowCount)< displaydata.length="" ;="">
{

SB. Delete (0, sb.length ());
SB. Append ("data");
SB. Append (Count);
SB. Append (",");
SB. Append (RowCount);
SB. Append("");
SB = String (displayData [RowCount]);
displayData [rowCount] = sb.toString ();


SB. Append (displayData [RowCount]); ((/ /, 0, rowCount); //displayData [rowCount]);
SB. Append("|");

ranks [count] .add (LabelField (sb.toString (new), LabelField.FOCUSABLE));
}
Add the line to the rowHolder.
rowHolder.add (rows [count]);
}

dataScroller.add (rowHolder);
Add (dataScroller);

Help, please

Rgds

Nadir

I think that you find wil this code gives you better results:

How - to create a presentation of the rich UI at TableLayoutManager
Article number: DB-00783
http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800508/...

There is also a blog about this handler:

http://supportforums.BlackBerry.com/T5/BlackBerry-Developer-s-blog/how-to-use-table-view-layout/BA-p...

Display data in a dataset when a field is null in the other set of data
Hi all

I have a report where I need to show some of the columns of a data set(Ex: SsOpportunity)... when there is no data in a column (Ex: "Petrofac-ProductLine") in the other set of data (Ex: SsRevenue) in a single table. I have another table that displays data for SsRevenue when it some data in the column "Petrofac-ProductLine.

The first table does not work for me. Please suggest me where to specify the condition.

Thanks in advance,
Imtiaz.
Sent files

#DATA # table XML
The field #DATA # Chart XML takes data from your SQL query and it wraps in XML so that AnyChart can return the table correctly.

Is it possible for me to customize how the XML is generated?
Where can I find the definition of the field #DATA #?

Thank you
Austin
Hi Austin,.

First of all, what APEX version do you use? Before APEX 4.0, Flash cards are supported using AnyChart 3.3 graphics, but with APEX 4.0, we have integrated AnyChart 5 cards. The XML reference differs a lot between releases two chart, so I just want to make sure I provide you with the correct information for the version of graphics you ' using #re.

The #DATA substitution string # on your list THAT XML is replaced at run time with XML tags containing the result set of your query for the chart series. If the XML table did not contain the #DATA substitution string #, then we assume that you provide your own data, and the chart series query will not be used. The generation of the XML tags for data differs from the type of graph type chart for example data for a pie chart labels are very different from that of a Gantt chart. Generally, users don't need to worry about this. They just need to provide the graphic series query, and the underlying logic supports the rest. However, if you need to customize only XML tags for data, for some reason, then you essentially have two options here:

(1) hard-code XML necessary in the area of Custom XML in your chart. This would require that you set "Use Custom XML" Yes, on the page table and in the area of Custom XML attributes, replace #DATA # by your XML example
```
  
    
    
    
    
    
    
    
    
  
```
NOTE: the above XML code is AnyChart 5 format, so if you use graphics AnyChart 3.3 XML code will look very different. I can provide a sample for that if needed. The reference XML 3.3 AnyChart are available here: http://3.anychart.com/products/docs/anychart/index.htm and the reference to XML AnyChart 5 are available here: http://anychart.com/products/anychart/docs/xmlReference/index.html.

or

(2) to generate your own data, through a process of page labels, for example, save the output in a page hidden item and then make reference to this element of the page on the list XML custom... again, you would remove the #DATA substitution string # and replaced by a reference to a hidden example item & P1_DATA. I had an example how to do that on my example of thresholds in sample, here: http://apex.oracle.com/pls/apex/f?p=36648:35. Basically, I used an application process to generate XML, to be customized because the tag must refer to a threshold attribute for example , and by default, the tag does not reference this attribute.

I hope that the above information is useful and if you need further explanation or assistance, let me know.

Kind regards
Hilary

Display data in the report to pl/sql
I need to display data in a report using pl/sql.

The structure of the table would be fixed, but the data it would come from a pl/sql.

Is this possible in Apex 3.2.1 for that? If so, how can we do this?
Hi Hozy,

As much as I know APEX report cannot manipulate the slider.

If the options are:
1)
Try the PIPE...
http://www.databasejournal.com/features/Oracle/article.php/2222781/returning-rows-through-a-table-function-in-Oracle.htm

(2) as has said Roel, complete apex collection using your ps/sql and use it in the report.

Kind regards
Shijesh

Display data table in a chart

Similar Questions

Maybe you are looking for