display fades, but in the second screen it works correctly

Similar Questions

• Display behavior incorrectly on the second screen in portrait mode?

  I use a graphics card from Nvidia GeForce 9400GT with two monitors (the two resolution 1600 x 1200). When the second monitor is in portrait mode, the contents of the window of Firefox are not correctly. This problem does not always occur, but when it does it persists as long as the computer is running (that is, between stops). The dysfunction of graph is displayed when the window is moved laterally, which case the contents don't follow the window correctly. This occurs if the "Show while dragging the content" is enabled or disabled.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• Y510P image does not fit into the second screen using HDMI

  Hi, I have the Y510P with Windos 8.1 latest graphic drivers. I am connect to my HDTV via HDMI and the image fits well in my TV and it has a little zoomed. I was looking for a solution in all the menus of Intel HD 4600, nVIDIA Control Panel, Windows scaling... Nothing works. I have another laptop and it has an option that is changing the image and the TV shows that what is supposed to be for show.

  How can I solve this and did what I see in the screen of my laptop on the second screen (TV)?

  Thank you!

  I have a 1280 x 720 Samsung TV, I don't know the model exactly.

  The probem disappear when you change your screen resolution, or change the size of the elements, or something like that. It has something to do with the Panel of Intel, where there is a scaling option, in the tab 'display '. Well, there should be an option to select the scale, but it is not.

  So, to make it appear, you need to do this:

  1. connect the HDMI

  2 desktop, right-click, screen resolution, in 'View', you must select your TV, in my case "Samsung TV"

  3. you change the resolution from 1080 to 720

  4. then select Samsung TV as output ONLY screen, so the screen of the laptop turns off

  5. go in Control Panel (right click, graphics properties... office, display) Intel

  6. NOW, in the scaling box, you can move the 2 sliders and adjust the image, so now I can make it adapt to the screen

  Although it is a solution, and everything works fine, I don't like. I should be able to look at the screen of my laptop, and the most annoying is that steps 1 to 5 are reset every time you unplug the HDMI. It is a temporary solution.

  I want my nVIDIA GT 755 M to take control of the HDMI, I think that I could just plug the HDMI then automatically shows properly scaling the picture of my TV. Just plug and unplug, like all my other computers.

  Thanks for the help and hope I can find a real solution.

• How to push the second screen?

  Hello

  I am writing an application in which I'm trying to push a second display to a custom in the first menu item. The first screen is pushed successfully and the custom menu items are filled with a bluetoothserialportlistener. Once I click on a special menu item, I want to launch the second screen. I used a dialog.alert to verify that the the menuitem run() method works, but the second screen is not displayed.

  Any suggestions are greatly appreciated!

  The first screen is created by hand (String [] args)

  MatMain app = new MatMain();

  app.enterEventDispatcher ();

  private MatMain() {}

  pushScreen (new WelcomeScreen());

  }

  I tried to call the second screen as follows:

  synchronized (UiApplication.getEventLock ()) {

  getUiEngine () .pushScreen (new MatOnline (_info));

  }

  I also tried:

  UiApplication.getUiApplication () .pushScreen (new MatOnline (_info));

  Thanks again!

  Hello

  I think you're trying in a very complex way.

  Your architecture using complex and ignoring the bluetooth codes related, I can see your second screen with a minor modification.

  In your DeviceMenuItem class.

  replaced

  MatMain.getUiApplication () .pushScreen (new MatOnline (_info));

  with

  UiApplication.getUiApplication () .pushScreen (new MatOnline (_info));

  And in your class MatOnline:

  replaced

  HorizontalFieldManager _fieldManagerOnline;
  with

  HorizontalFieldManager _fieldManagerOnline = new HorizontalFieldManager();

  Concerning

  Bika

• CTRL-Alt-2 moves to the second screen windows - how to disable

  Hello

  I have a new computer to dual screen in Windows 8.  When I do Ctrl + Alt + 2, my current window is moved to the screen 2 (and equivalent to 1).  Does anyone know if it is a shortcut of Windows 8 or another utility?  I have a nVidia graphics card and the 7200LE Panel is not shortcut (besides the stereoscopic 3D features that are disabled).

  The problem is that Windows seems to treat the key ALT GR (right Alt key for the keyboard layout of the French-Canada) as a combination of Ctrl + Alt, then when I press Alt Gr + 2 to type the symbol @, my window also moves to the second screen.  The equivalent problem is when I type the ± symbol (AltGr + 1 gives my character, and move the window), but this isn't as big a problem.

  Anyway, if anyone knows how to disable the Ctrl + Alt + 2 sets of shortcuts, or how to make windows treat differently the keys Ctrl + Alt, AltGr do let me know.

  Thank you
  IM

  I had the same problem, and in my case it was a third-party application that came with a USB to DVI adapter.

  The utility is called "MCTDUtil.exe" and is in "\Program Files".

  It has a visible icon called "Super Utility".  There, you have a menu called "Multi Display Control Panel".  The Ctrl-Alt-1 and Ctrl-Alt-2 are mapped to do exactly this: move the window being displayed 1 and 2 respectively.  You can disable the feature of this Panel.

  I suspect that this utility is not necessary and can be removed.

• HOWTO define the second screen?

  Hello

  I have a Setup to monitor tripple (a Samsung for coding, the iMac 27 "non-retine and a screen 24" Apple Led Cinema-> in that order). Lightroom choose the Samsung as the second screen, but I want the Apple Cinema (the display on the right side of my iMac which is my primary monitor). I am able to move the window manually to use this form, but the second is still the Samsung.

  So, what can I do to change permanently the second screen?

  Thanks for the tips and tricks

  Abhijit

  It is a question unresolved, which was for the first time five years ago: Lightroom: ability to assign a second monitor with more than 3 monitors. Photoshop family customer community you can read some of the posts with solutions on the link above and see if one of them solves your problem.

  The only other suggestion I can give you is to try swapping the crush of ports used for Apple Cinema and Samsung monitors. Connect the cable of Samsung display in the Thunderbolt port, used by the Apple Cinema and vice versa for the Apple Cinema cable for display. Logically, this should exchange the display that receives the secondary window of LR, but I have not seen anyone offer it as a solution. Unfortunately, I don't own an iMac so he can't test me.

• Open Web page on a sceen not is not properly displayed when moved to the other screen

  Installation: imac 5K retina with a secondary LCD attached via thunderbolt-HDMI interface

  Two issues were identified after Firefox updated version 38.0.5:
  1. #1 problem: when I open the Web page on imac (main screen), it opens OK, so if I move to the secondary screen, it is not displayed correctly. Looks like a second copy of the same 1/4 of the original page size is superimposed on the upper left corner. See attached screenshot #1

  2. #2 problem: when I open a Web page on the second screen, it opens ok (see the screenshot #2), then if I move it to the main screen (imac), it is not displayed correctly. Looks like the page on elementary school zoomed. See attachment page #2 (in the second screen) and #3 after be moved to the main screen (imac)

  Hi njarif,
  I've seen this before and he could never adequately describe. I think that you have enough information here to fill out a bug report:

  • The resources for the filing of a bug in bugzilla.mozilla.org are listed below:
  • Bug for assistance: https://bugzilla.mozilla.org/enter_bug.cgi?format=guided
  • Bug writing guidelines

• Satellite P50t-B01E - BD Player does not play using the second screen

  Using PC mode "extend", dragging player across the second screen causes reader Toshiba BR disable playback of the disc. The drive interface moves on, but the game is not possible.

  Other media and the information can be consulted. Connecting via HDMI.

  Thanks in advance.

  I guess you will be able to use the player Blu-switching the video output for external monitor without the use of the extended mode.

  Could you confirm this?

• Satellite M30X-129 - no video on the second screen

  I have a M30X-129, which for the most part works fine. However, when I have a second monitor attached (for example, an overhead projector) everything is displayed outside a video/film clip, which appears black. This occurs if Windows Media Player or Realplayer is used. All other programs and images are visible on the external monitor or laptop screen.

  I installed Windows XP Pro on the orig XP Home version. All drivers were installed and updated as required. I thnk I have a Raedon graphics card.
  Any ideas on how to have movies/clips on the second screen?

  Thank you.

  Hello

  Most Windows applications and video cards do not support playback of video files on the screens at the same time. You can try to disable the video signal going to the built in LCD screen and display only through the projector.

• set the second screen as the main screen

  I have an external monitor connected to my macbook pro. Is it possible to put this external monitor as the main screen. It seems that El Captain only opens new windows and applications on Macbook Pro screen.

  You can change the order via system preferences > display > Arrangement. Drag the white line (menubar) on the second screen to make it primary.

• losing audio after adding the second screen

  Why am I losing my sound after having added the second screen (sony sdm-hs95)?

  My customized HP ENVY 17 t-j100 Quad Edition Notebook PC includes:

  • • Windows 8.1 64 Pro
  • • 4th generation Intel® Core™ i7-4800MQ processor
  • • Included 2-year warranty
  • • NVIDIA GeForce GT M 740 graphics with 2048 MB of video memory dedicated
  • • 17.3 inch diagonal Full HD LED-backlit Display (1920 x 1080) anti-glare Non touch
  • • 8GB DDR3 System Memory (2 Dimm)
  • • 2 TB 5400 RPM hard drive
  • • 24GB flash acceleration Cache hard drive
  • • Two batteries of Lithium-Ion 6-cell
  • • Blu - ray player & SuperMulti DVD burner
  • Backlit keyboard •
  • • HP TrueVision Webcam high definition with digital microphone built-in
  • • 2 x 2 802.11b/g/n WLAN and Bluetooth® [2 x 2]

  Thank you

  Hello

  How do you connect the second screen? Using HDMI? If so, please disable the sound HDMI playback devices

  Right click on the speaker icon > playback devices select > right click HDMI Audio then turn it off

  Kind regards.

• How do to wake up the second screen after computer fell asleep

  We have win 7 x 64 ultimate systems with two monitors in several floors in the building.

  We often spend the system sleep when we go to meetings. When we return, we wake up the system, but only the #1 screen is active, and #2 display will be black. We can only get display #2 will be active, after that shut down the system and boot the system again.

  These systems were under Vista before and double active poster awake after sleep.

  What can we do to create the active #2 display?

  Boring, but it worked for me...

  1. Device Manager > graphics cards
  2. Disable all video cards
  3. Turn on all video cards

• How to display a message on the second tab when an option is selected in a drop-down

  Hello

  I use a combo of my title bar, to within my application to display a list of options that will trigger different URL webViews.

  On my first tab I have a Web of a page view and when the option is selected the webView will change and the second tab will load the same webView but with /deals at the end of the url.

  The problem I have is that one of the options does not have a page of /deals on their site so I was wondering if it would be possible to hide the second tab or display a message on the second tab, when this specific option is selected?

  Thanks in advance

  If your problem is what method to use to hide the tabs or what...

  You can use these functions... It will remove the tab but will not destroy the content, it's like hiding and showing a tab

  REMOVE / HIDE

  tabbedPane.remove (theTab);

  ADD / VIEW

  var index = 2; the tab index

  tabbedPane.insert (index, theTab);

• How just the keywords in a folder to display name, but not the keyword of the same name, itself?

  In my keyword hierarchy, I, for example, special types of photography.  It is a folder called "photography."  Below I have landscape, portrait, seascape, Candide etc...  How can I get just the keywords within the photograph on the screen, but not the word "photography" itself?

  How can I get just the keywords within the photograph on the screen, but not the word "photography" itself?

  Do you mean, how do you get pictures containing child 'photography' to display keywords, but not the photos containing the keyword "photography"?  If that's what you want:

  In the library filter bar metadata Explorer, add the keyword column.  Expand the parent keyword "photography".  Click on the first keyword of the child and shift + click on the key word of the last child, so that all the keywords under "photography" are selected.  All the photos containing the child keywords of "photography" show now, but no photos containing "photography":

  

• Three-Way Color Corrector eyedropper tool works only on the second screen in OSX Maverick

  Hello

  Since the update to the Mavericks at work on Monday, I was unable to use the eyedropper tool to the three way color corrector on a dual monitor configuration in first Pro CC.

  I have all of my panels, outside of my program monitor Panel, on a screen. When I select the Eyedropper to the three way color corrector white balance and go to the second screen where my program Panel is, he turns his back on an arrow and I cannot select anything. When I move my Panel program to display as well as others it allows me to use it as usual. Unfortunately, this is not how I work and I would like that the program works normally.

  I was wondering if anyone else has had this problem and found a solution. I will report to bug right now.

  Thank you.

  Hi Punker,

  Thanks for posting the workaround. It is a known issue that we're investigating. FOW now workaround is to:

  GoTo > System Preferences > Mission Control.

  Uncheck "screens have a separate space.

  System disconnection or re - start.

  The problems must be solved.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro