Display garbage instead of Unicode character

Similar Questions

• Is it possible to display name instead of # spec spec?

  For a specification of Production packaging ready, when you add related specifications (base spec packaging), the name of the specification were previously [v6.1.1.x], but now [v6.2.0.0.x], it shows just the # spec.

  

  Is it possible to display name instead of # spec spec?

  Thank you

  Nefertari

  Name next to the Spec number form in the research of Formulation Material Input pop up in point 6.2

  Nefertari, please see the solution in the link above.

• question links to Unicode character compatibility

  Ask for help on the issue of compatibility with Oracle 11 G R2 32 Bit DB Unicode character.
  
  Number description: I created a profile in my application and named with Unicode characters(German\Russian\Latvian... alphabets), at the opening of the profile his throw a error message "profile of Bill is not found in the database."
  
  During the installation of Oracle database, I chose the Unicode UTF-8 characters in data set. According to our guide to applications, it considers that the database characterset and not the character set.
  
  Let me know if I have to make a few additional parameters with respect to the parameters of this globalization.
  
  Thank you
  Brij

  I don't know what made the request, so I don't know also the role of profile and what is not found - just - in the database. At least 'a profile of Bill' is not a native Oracle object.
  Is it not possible to analyse the problem of enforcement.

  On the database side character set UTF8 (although I prefer the 'new' characterset AL32UTF8) is appropriate in a globalized environment. What to do in the interaction between the application and the database - which depends strongly on the application itself.

  Werner

• Unicode character on the command line

  I have a folder that contains a non-ASCII character, "registered sign" (®), which can be typed in a Terminal by using the-r option.

  It is U + 00AE, and as an 8-bit character, it is 174 decimal. I want to be able to enter this character on the command line without

  typing Option, because I have to build a Terminal command using an application that

  is not respectful of Unicode. So option-r helps me create a string that contains this character.

  For example, in the Terminal, I made a folder in ~ with as its name in full (I typed a r while pressing the option key):

  > mkdir ~ /.

  I can list help

  > ls ~ /.

  but I have to be able to do so * without using any modifier key * (as option).

  I thought I could use something like (after cd ~)

  > ls \302\256

  or

  > ls \u00AE

  or

  > ls \xc2\xae

  but I could not do the shell to interpret what I type as registered r symbol. Everything what I enter is interpreted

  literally as individual characters rather that, for example, the \xC2 is considered a single character. I also tried different combinations

  quotes as double the backslash, but I continue get "No such file or directory".

  How can I represent this character on the command line without modifier keys? I'm on El Capitan, OS X 10.11.2, running bash 3.2.

  Have you tried zsh instead of bash?

  I think bash supports \u starting only 4.2

• Display of Asian characters, Unicode issues

  I have a problem with the display of Asian characters. In a number of programs instead of display characters, it shows just the squares for lack of character. So far the programs I've seen this problem in are iTunes, Windows Explorer, Notepad and Windows Media Player. When I copy these places in Google Chrome, they seem like the appropriate characters. I recently installed Windows 7 (some time last week) and could see all the fine Asian characters. The problem started this morning after restarting my computer (before I restarted the computer, I could see all the characters). Most of the solutions, I tried an online state change settings Japanese system locale. However, the characters I want to see are not all Japanese. Some are Koreans and some Chinese. Is there a way to establish that he is able to show all three types of characters?

  Hi crazymanjinn,

  a. what edition of windows 7 you are using?
  b. recent changes made on your computer, such as installing or upgrading the software/hardware?

  If it solves your problem, you can try the steps and check them off below.

  1. open region and language by clicking on the Start button, click on the Control Panel, clicking clock, language, and region, click the region and language.
  2. click on the keyboards and languages tab.
  3. under display language, click install/uninstall languages, and then follow the steps.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the links below:
  http://Windows.Microsoft.com/en-us/Windows7/install-or-change-a-display-language
  http://Windows.Microsoft.com/en-us/Windows7/using-special-characters-character-map-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows7/products/features/language-packs

  If your problem persists then, you try to run the restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  Hope this information is useful.

  Umesh P - Microsoft Support

• Display records with a special character to the end user

  Hello
  
  What follows with the exception of special characters such as the comma, colon (:), space, preview, brackets [], parenthesis(), key entry, quote (') single, the double quotes (""), full stop (.), slash (/) forward, backward slash (\), + (plus), % (percentage),?) (questionmark), # (pound sign)
  
  -> if anyone is available in the record, I want it back and also show the special character. for example, retrieval must be id 21, 22: 16
  -> also I want a list of special characters like message in the sql
  for example, 16 ID, (¶, §) must be displayed in the output
  
  
  
  WITH abc AS
  (
  
  11 SELECT ID, ' he is suffereing
  jaundice"summary FROM DUAL
  UNION ALL
  Order 12, "we can go to the bus stop. OF THE DOUBLE
  UNION ALL
  SELECT 22, 'a mΦnsoon is provided affect≈the region during the next φ a few days' OF the DOUBLE
  UNION ALL
  SELECT 16, "Film¶city looks like go§d." DOUBLE
  UNION ALL
  SELECT 21, "The International @l ¥ mpic Committee moved the bike could Calm fears scratching the Olympic Games." OF THE DOUBLE
  UNION ALL
  SELECT 17, ' John F Kenny was a "young president" America "OF the DOUBLE
  UNION ALL
  18 SELECT, ' the Department of elections, identified (10) polling stations for voters to go to
  thei\r January 26 vote for the by-election of Punggol East Single Member constituency ' FROM DUAL
  UNION ALL
  SELECT 19, "the pilot of the helicopter that + crashed in Central London were thousands of"
  hours of experience of aviation including flight % for films such as die another day and save #Private #Ryan?' THE DOUBLE)
  Select id, summary, 'show special char' in splch
  ABC
  ;
  
  OUTPUT
  SUMMARY of the splch ID
  
  Film¶City 16 looks like go§d. ¶§
  21 the International @l ¥ mpic Committee moved the bike could Calm fears scratching the Olympic Games. @¥ O
  22 a mΦnsoon is planned for the region during the next φ affect≈the days Φ≈φ

  Hello

  Here's one way:

  WITH     got_special_characters     AS
  (
       SELECT  id
       ,     summary
       ,     REGEXP_REPLACE ( summary
                        , '[][[:alnum:],: ()''"./\+%?#'  ||
                              CHR (10)                ||
                       '-]'
                        )     AS special_characters
       FROM    abc
  )
  SELECT       id
  ,       summary
  ,       special_characters
  FROM       got_special_characters
  WHERE       special_characters     IS NOT NULL
  ORDER BY  id
  ;
  {code}
  Inside square brackets, the characers ']' and '-' have special meanings, unless you use them in places where the special meaning can't apply.  That means the ']' must be the first character inside the square brackets (Oracle assumes you're not ending the set right after you begin it) and the '-' must be the very last character inside the square brackets.
  Depending on what newline is on your system, you may want to use CHR (13) in addition to, or instead of, CHR (10).
  
  it would be more efficient to use the TRANSLATE fucntion, rather than REGEXP_REPLACE, to produce special_characters.  You'd have to list all 80 or so of the non-special characters, but you'd only have to do it once.
  {code}
  WITH     got_special_characters     AS
  (
       SELECT  id
       ,     summary
       ,     TRANSLATE ( summary
                   , '=0123456789ABCEDFGHIJKLMNOPQRSTUVWXYZabcedfghijklmnopqrstuvwxyz,: -[]()''"./\+%?#'
                         || CHR (10)
                   , '='
                   )     AS special_characters
       FROM    abc
  )
  SELECT       id
  ,       summary
  ,       special_characters
  FROM       got_special_characters
  WHERE       special_characters     IS NOT NULL
  ORDER BY  id
  ;
  

  Published by: Frank Kulash on 16 January 2013 12:35
  TRANSLATE the code added.

• Why the firefox rendering engine go berzerk and display garbage?

  As I scroll or I go to a new page, more at any time, the display in the window of Firefox becomes badly displayed. It is pehaps diagonally across the window or perhaps a sub display field appears distorted diagonally. I could send a screenshot. It happened a bit when you use Thunderbird, which I understand has the same rendering engine but not lately. If I close Firefox and start it again, it might behave for a while. He quickly began having problems again. Right now, as I type this, this pane for entering text flashes on and outside, and it has now begun to go diagonal to its display. At the same time, I continue to type text. Is it possible to send some screenshots? As I type this and then to the bottom of the page, try to copy and past the information requested below in case of problem, I had a lot of trouble with the screen turning autour. Finally, I noticed the link to copy all to the Clipboard to paste below. I can't tell you if he did because I can't get the window below to display correctly.

  Instead of boot mode safe, you can try to turn off the use hardware acceleration where possible of Tools (Alt + T) > Options > Advanced > general and restart Firefox normally.

  You can also take a screenshot using the PrtSc / SysRq key on the keyboard. This takes a picture of the whole desktop, copy the memory/Clipboard and you can paste it in any graphics program, save it and download it. To take a just active window press Alt and the key above together.

• screen displays only the hex (unicode) characters

  screen only displays text in blocks of 4 characters that looks like unicode. Other applications, including IE work fine.

  Safe mode disables extensions in Firefox 4, and disables hardware acceleration.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If that works, then try the toggle some of downtown of Boolean gfx on the topic: configuration page to enable or disable some features.
  
  Filter: gfx

• How to display the non supported unicode for the title of the window

  I'm developing an application using Java swing. In my application, I want to display Myanmar fonts (Unicode) for the title of the window. But windows 7 doesn't support Myanmar police. So, I would like to know is possible to change the font of the title bar? (Windows 8 supports unicode Myanmar and may display correctly).

  I already tried to "change the window colors and measures" and changing the locale also.

  And my OS is the Japanese version.

  Thanks in advance.

  Hello

  Please contact Microsoft Community.

  According to the description, I understand that you are developing an application that uses Java swing and you want to display Myanmar fonts (Unicode) for the title of Windows. And now, you need to know is possible to change the font of the title bar on the system?

  Certainly, I understand your concern and will try my best to help you.

  In order to get more information about this, I suggest you to post your query on the forum of the MSDN Community for that matter. You can get more effective suggestions and adapted by experts familiar with this topic.

  Please visit the link below for the best support.

  https://social.msdn.Microsoft.com/forums/Windows/en-us/home?Forum=WinForms&sort=relevancedesc&brandIgnore=true&searchTerm=IE+programming

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• TANDBERG Ex60/90 display (H323) instead of (SIP) in the movi account directory.

  Hi all

  All have experience this display TANDBERG Ex60/90 (H323) instead of (SIP) in the directory of the account movi, while in tanderg C40display movi (SIP) account.

  We are now using the TC4.2.1 software and tried to restart the system.

  Best regards

  Ben

  the system is most likely not registered via sip or the default protocol is set to h323

• How to display text instead of a value empty in the SelectOneChoice list.

  Hello

  I have a requirement where I need to display a string of characters such as "Please select value" instead of the item in the select list of first choice. To remedy this on an empty value, this string if displayed in the list of choices, and if the user does not select any value it should be treated as an empty value normal and validation should be fired.

  May I know is there a property that we can set declaratively or any workaround for this?

  My version of JDev: 11.1.1.7.0

  Much thanks in advance.

  Kind regards

  Dietsch.

  Hello

  In the list of values of the VO, check "Include any item in the selection", select "label point first in the list ' from the drop down and give your custom label.

  Thank you

• Display name instead of the ID in the user interface

  Hello
  
  I have the script below to implement. Please see the description below:
  
  __table 1__
  
  ID name
  1 ABC
  2 XYZ
  
  
  Table 2
  
  Tabe1ID col1, col2
  1 Col1value1 col2value1
  2 Col1value2 col2value2
  
  Table1ID column corresponding to the foreign key from table1.
  
  I show data from Table2 in the user interface. while displaying the data in the UI instead of the value of the column Table1ID, I need to display the values of corresponding name column in table1.
  
  that is my view of the user interface should look like below:
  
  Tabe1ID Col1, Col2
  ABC Col1value1 Col2value1
  XYZ Col1value2 Col2value2
  
  could if it you please let me know how I can achieve this in ADF?
  
  Thanks in advance.
  
  Published by: user8673275 on December 12, 2012 06:27

  What version of Jdeveloper? Since you are new to the forums... Please read this before posting so that we can help best-
  https://forums.Oracle.com/forums/Ann.jspa?annID=56

  If you use ADF BC, you can create a VO with a join between the table 1 & table 2 exposing all the fields.
  Then you can drag and drop the original Version as an array of attributes required on the user interface.

  This should focus on what I said - the name instead of id

• How to capture and display the end of line character in the report

  Hi guys,.
  
  I have a report that we are poster campaign ID, campaign name, and Description of the campaign.
  The result is coming like this
  
  Description of campaign campaign campaign ID name
  1 ABC 1 Plan June 13. 2 market July 1. 3. end July 30.
  Plan XYZ 2 1 13 June. 2 market July 1. 3. end July 30.
  
  But we want the data to be displayed in the following format.
  
  Description of campaign campaign campaign ID name
  1 ABC 1 Plan June 13.
  2 market July 1.
  3. end July 30.
  Plan XYZ 2 1 13 June.
  2 market July 1.
  3. end July 30.
  That the user has the possibility to enter several lines for the description in front end Application & want us to show the same way Description. How can I capture this end of the character in ETL? If he is already captured, then how to show in the report.
  I use Siebel as before end application and for the ETL using Informatica.
  
  Any help will be much appreciated.
  
  Thank you
  Rupesh

  OBIEE presentation Service is an HTML element based on software then it does not show the end file character CHR (10) or Chr (13).
  You must replace this with the HTML tag charcaters
  .

  I'm not sure of the name of the function, but you must make a formula like this

  replace(mytable.mycolumn, chr(10), '
  ')
  

  See you soon
  Nico

• read the unicode character value

  Hi all
  
  I'm reading a file that is written in albanin. So of course, I've implemented a way to read in unicode and then store then in an Arraylist and print again return.
  
  Here is the code I tried:
  
  FileInputStream
  Dim str As String = null;
  Try
  {
  in = new FileInputStream ("C:\\Users\\Administrator\\Desktop\\d1.txt");
  InputStreamReader inputStreamReader = new InputStreamReader (in);
  BufferedReader bufferedReader = new BufferedReader (inputStreamReader);
  
  Str = bufferedReader.readLine ();
  }
  catch (System.Exception e)
  {
  e.printStackTrace ();
  }
  
  StringBuffer ostr = new StringBuffer();
  
  for (int i = 0; i < str.length (); i ++)
  {
  
  
  OSTR. Append ("\\u");
  Hex String = Integer.toHexString (str.charAt (i) & 0xFFFF); Get a hex value of Arctic char.
  
  for (int j = 0; j < 4 - hex.length (); j ++) / / Prepend zeros because unicode requires 4 numbers
  OSTR. Append ("0");
  OSTR. Append (hex.toLowerCase ()); format of the unicode standard.
  
  }
  
  System.out.println (new String (ostr));
  
  
  
  
  Although the unicode letter 'Ë' is 00cb, program gives the value "\ufffd" but for other normal characters, it displays the correct values (for English characters)
  
  
  How can I solve this problem?
  
  
  Thanks in advance...

  first of all, check your encoding of the file.

• Display 0 instead of null values?

  Hi, I have two sets of data.
  
  I must join the two sets of data in a table.
  
  Data set has code article and set of data 2 also has the product code
  I need to join data sets and display them in the same table.
  I managed.
  
  But for these product codes that does not all entries in the other group of data, the table shows empty values.
  
  I need a zero to display instead of empty/Null
  
  Please take a llook the illustration below
  
  http://img716.imageshack.us/img716/6060/63975015.jpg
  
  Can send you the model and xml overall.

  Use