Display in the form of formatting editor

Similar Questions

• How can I increase the space of name display in the form, material and specification of the nutritional profile?

  Problem:

  1. How can I increase the space of name display in the form, material and specification of the nutritional profile?

  2. how to increase display space for the name of the sheet in the history section at the top of the screen?

  Thank you

  Hello Nefertari,

  You try to view more characters in these areas?

  Each of these locations is plugable using custom plugin extensions.

  For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.

  I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).

  It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.

  Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.

  See this older post for more information https://community.oracle.com/thread/2562965

  Is that what you're looking for?

  Dmitriy

  .

• What is the unit allocation size that is displayed in the window to format USB?

  Original title: allocation unit size

  What is the unit allocation size that is displayed in the window to format usb

  Hi Moaz,

  Thanks for posting your question in the Microsoft Community.

  I understand that you want to know the unit allocation size that is displayed in the format USB window. Correct me if I'm wrong.

  I will certainly help the question of fixing.

  In computer file systems, a cluster is the unit of allocation of disk space for files and directories. To reduce the load of the management of data on disk structures, the file system allocates no individual disk sectors, but contiguous groups of sectors, called clusters.

  On a disk that uses 512-byte sectors, a 512-byte cluster contains one sector, whereas a 4-Kibibyte (KiB) contains eight sectors.

  Refer to the below mentioned article and see if it provides information that you are looking for.

  By default for NTFS cluster size, FAT and exFAT:

  http://support.Microsoft.com/kb/140365

  Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.

• How to edit pdf file (in indesign) without having to re-export then and redo all the fields of the form and formatting?

  How to edit pdf file (in indesign) without having to re-export then and redo all the fields of the form and formatting?

  Edit PDF files in InDesign is not a good idea. If the file was originally exported ID, then change the original and then create a new PDF file.

  Open an old, and then use the command replace Pages to insert the new pages on the 'old'. The fields that you have already created will remain in place when you do this.

• Need custom logo to display in the form menu bar

  How to change the Oracle logo on the right side of the Oracle Applications
  menu (11.5.10)
  Need custom logo to display in the form menu bar

  Regenerate you the jar files using adadmin successfully?

• Name of ToolTip to display in the form to fill out?

  I'm new here ! Looking for help on how I can make a text field has a name that will be displayed for the user to know what information is needed in the field, but will not display the name of the ToolTip. I searched and found that it is possible with a Javascript. However I'm not fimiliar at all with this... but can quite understand it with the help please. I use acrobat 9 standard to create my form.

  You can set the actual ToolTip text on the general tab of the field properties dialog box.

  If you want the text to display in the actual field that disappears when the field is selected and does not print, you can use the following custom Format script:

  // Custom Format script for text field
  if (!event.value) {
      event.value = "Instructional text goes here.";
      event.target.display = display.noPrint;
  } else {
      event.target.display = display.visible;
  }
  

  If you also set the ToolTip text, this code can be changed to:

  // Custom Format script for text field
  if (!event.value) {
      event.value = event.target.userName;
      event.target.display = display.noPrint;
  } else {
      event.target.display = display.visible;
  }
  

• How to get multiple rows in the table is displayed on the form

  I am looking for a way to get more table rows that appear on the form.  I created a table with a header and a line with the add-in and remove button option.  I like how the sample purchase order form has it setup in the designer it shows one line and it appears on the form so the table has three rows to start with.  How do I do that?  I looked at the code on the sample and I couldn't find it anywhere.  Please help, thanks.

  Hello

  I have an example here in the construction of a dynamic array markets.

  http://www.assuredynamics.com/index.php/category/portfolio/building-dynamic-tables/

  You must select the line and then go to object > Binding palette and set it to repeat. You can set the minimum and initial number to what you want.

  The form should be saved in a dynamic form of XML in the Save as dialog box.

  Also the page must be set to Flowed, so that as the table grows, push another object down. In addition, you need to configure the paging settings so that the flow of the page as the number of lines is superior to a single page.

  Give a start and if you need more help,

  Niall

  Ensure the dynamics

• % No display on the form

  Hello
  
  I've created my account on percentage data type. But when the forms I don't get for example 50% but only 50. Is it possible to implement?
  
  Thank you

  Hello

  Have you tried - evaluation order (Administration-> size)

• In the form of formatting with CSS is not possible

  APEX 5.0, Oracle 11 g 2 Express Edition

  I need to format FORM via the external CSS file.

  I created the CSS with the following code:

  .uReport .uReportStandard {}

  padding: 1px;

  do-size: x-small;

  }

  After the page loads the COLUMN header is unchanged (I tryied to copy the CSS code in my template inline-> 'Two level tabs - No. Sidebar').

  I think that the css code will be replaced by another, is it possible?

  Thanks in advance for any help

  Joe4APEX wrote:

  Theme: ""Productivity Applications - 26 *"»
  Page: "two level Tabs - no sidebar.

  Region: "the other reports.

  Report: Standard

  Firefox Mozilla

  I inspected the selectors used in the theme and created more specific override rules by including another class from a report wrapper element in the descendant selector:

  .uReportBody table.uReportStandard thead>tr>th,
  .uReportBody table.uReportStandard tbody>tr>td,
  .uReportBody table.uReportStandard tbody>tr>td input,
  .uReportBody table.uReportStandard tbody>tr>td select,
  .uReportBody table.uReportStandard tbody>tr>td textarea,
  .uReportBody table.uReportStandard tbody>tr>td button {
    padding: 1px;
    font-size: x-small;
  }
  

• Impossible to get the icons to display in the form 11g

  We have recently updated to form 11g and I am unable to get our forms to display custom icons. I tried a variety of techniques of research on the web, but none of them have worked. Can someone give me some ideas here?
  
  Thank you
  Adam

  Adam;

  Thanks for all the details. I'll gather my notes and change this ASAP, I think I have a bit more clues.

  Best regards

  mseberg

  My setup is a different path, but I used this formsweb.cfg:

  formsweb.cfg

  Location: servers/WLS_FORMS/stage/formsapp/11.1.1/formsapp/config.

  or

  /U01/app/Oracle/product/FMW/user_projects/domains/FormsReports/servers/WLS_FORMS/tmp/_WL_user/formsapp_11.1.1/wb1h9e/config/formsweb.cfg

  My repertoire of forms is:

  / u01/app/oracle/product/FMW/oracle_pfrd/Forms

  I use E10240-01 as my guide. Section 4.7 deployment fonts, icons and Images used by Forms Services, it shows using EM to map icon and fonts. I still have to test.

  Published by: mseberg on February 23, 2011 09:49

• Several records displayed on the form to a time-2 lines for each record

  Hello
  I have a Web in which I want to display to 8 records at the time, in the data block, I've specified 8 as value "number of records".
  However, the record includes too many fields to display on 1 vertical line, I wish so to divide the fields into two separate lines, there will always be 8 folders, but each in two lines.
  How do I do that?
  I use form 10g. The block is a block of database using QUERY CLAUSE, and the canvas is stacked.
  Thank you

  Sandy,
  You will need set the 'Distance between Records' property for each item in the block for multiple registration. This will increase the space between the lines, so you can stack them in two rows. Unfortunately, you cannot set this property to the block - so you must set for each display element.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• JDev10g: Tree links values displayed in the form.

  How does show a values in one single reading shape from a selection of tree node?
  
  
  for example: select a value in the tree view, and then display the results in a form (based on this selection).

  Hello

  Please take a look if this can help

  http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#128

  Frank

• Members to display on the form online

  Hello
  I have my product dimension that have multiple hierarchies (all members) and an attribute associated. Now, I need show all the level zero produced under a particular and associate certain attribute parent. How is that possible? I see no option to apply AND or OR conditions.

  Hello

  By default, the operation is AND choosing the dimension members in a Web planning form. What selection of your products on the left window, select Lev 0 Descendants of the parent product and cross to the right. Then on the left side, select variables at the top and go down and you will see the dimensions of the Att. Pierce, then select the att you want and as you move to the right. This will be your Lev 0 selection as well as the name of Att. It works like 'and '.

  Thank you

  Anthony

• How to display in the form of conditionally based on a data connection file?.

  Hi, let's say I have a form that contains a specification of the car and consists of N parties (Forms):

  Part I

  Part II

  Part III

  ...

  part N

  These pieces are secondary forms, and given a specific xml data connection file, I need to show the parties if and only iff certain elements of this XML exist or not. Say, part II is called: "airbag", but if the car does not come with airbag (in the xml section of the airbag does not exist) then the subform should not appear.

  How can I do this?

  Thank you!.

  Hello

  It's the kind of thing that you can do with a subformset with the option "select a subform of Alternatives."

  There are a few examples that come with the installation of the designer, the designer install directory look in .\EN\Samples\Forms\SubformSet (assuming you want English, otherwise change the BINARY).

  Bruce

• displayed in the form of Arabic characters? after import

  Hello
  
  I did a full database export of base 8.0.6.0 and imported in 10.2.0.4 (with less than 10g parameter NLS). All the Arabic characters in 10g are shown as "?", but when I type and save the Arabic characters, they are displayed correctly. Where would be the problem. I need all the old data to be displayed in Arabic. Please advice
  
  * 8.0.6 win server 2003 (32-bit) parameter NLS *.

  PARAMETER                                  VALUE
  NLS_LANGUAGE                          AMERICAN
  NLS_TERRITORY,                         AMERICA
  NLS_CURRENCY,                            $
  NLS_ISO_CURRENCY,                 AMERICA
  NLS_NUMERIC_CHARACTERS,       .,
  NLS_CHARACTERSET,               AR8MSWIN1256
  NLS_CALENDAR,                        GREGORIAN
  NLS_DATE_FORMAT,                  DD-MON-YY
  NLS_DATE_LANGUAGE,              AMERICAN
  NLS_SORT,                                    BINARY
  NLS_NCHAR_CHARACTERSET,  AR8MSWIN1256
  NLS_RDBMS_VERSION,                   8.0.6.0.0

  * 10.2.0.4 win 2008 Server (64-bit) NLS settings *.
  

  SQL> select * from nls_database_parameters;
  
  PARAMETER                            VALUE
  ------------------------------ ------------------------------
  NLS_LANGUAGE                   AMERICAN
  NLS_TERRITORY                   AMERICA
  NLS_CURRENCY                        $
  NLS_ISO_CURRENCY            AMERICA
  NLS_NUMERIC_CHARACTERS         .,
  NLS_CHARACTERSET         AR8MSWIN1256
  NLS_CALENDAR                  GREGORIAN
  NLS_DATE_FORMAT            DD-MON-RR
  NLS_DATE_LANGUAGE       AMERICAN
  NLS_SORT                            BINARY
  NLS_TIME_FORMAT             HH.MI.SSXFF AM
  
  NLS_TIMESTAMP_FORMAT           DD-MON-RR HH.MI.SSXFF AM
  NLS_TIME_TZ_FORMAT                HH.MI.SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT    DD-MON-RR HH.MI.SSXFF AM TZR
  NLS_DUAL_CURRENCY               $
  NLS_COMP                                    BINARY
  NLS_LENGTH_SEMANTICS           BYTE
  NLS_NCHAR_CONV_EXCP           FALSE
  NLS_NCHAR_CHARACTERSET    AL16UTF16
  NLS_RDBMS_VERSION                10.2.0.4.0

  Thank you

  NLS_NCHAR_CHARACTERSET is irrelevant if you keep your Arab data in N [VAR] CHAR columns. In addition, AL16UTF16 supports Arabic, and there is no need to change. Please, ignore the advice of Fran. However, the advice of Srini. The journal will tell what could have gone wrong. The most likely is that the 8.0.6 export was done without NLS_LANG value. AR8MSWIN1256. In this case, you will need to NLS_LANG well-positioned and re-export. Keep the NLS_LANG value. AR8MSWIN1256 when importing as well.

  -Sergiusz