How to display in the form of conditionally based on a data connection file?.

Similar Questions

• How can I increase the space of name display in the form, material and specification of the nutritional profile?

  Problem:

  1. How can I increase the space of name display in the form, material and specification of the nutritional profile?

  2. how to increase display space for the name of the sheet in the history section at the top of the screen?

  Thank you

  Hello Nefertari,

  You try to view more characters in these areas?

  Each of these locations is plugable using custom plugin extensions.

  For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.

  I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).

  It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.

  Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.

  See this older post for more information https://community.oracle.com/thread/2562965

  Is that what you're looking for?

  Dmitriy

  .

• I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors?

  I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors? (I do not change the color of shapes, I think that I just changed it in some weird setting)

  Figured it out! It was in 'outline' mode I went to view > preview and are back to normal.

  How can Illustrator Adobe - I get out of the preview display? -Graphic design change battery

• How to display icons in FORM 11 g

  Hi all
  
  I use forms oracle 11g 64 bit on windows server 2008 64 bit (fusion middleware) and oracle database 11g 64 bit.
  
  My question is that how can apply icons in forms 11 g?
  
  before this, I create a form with developer 10g with icons on the buttons,.
  now when I compile these forms in forms11g, the icons will now appear.
  
  How to get around?
  
  Kind regards.

  Hello

  Just do the following:

  1. place the images in a folder of your choice. Theoretically, we will assume that they are found in-> d:\images

  2 configure your environment so that ORACLE_HOME\jdk\bin is in your path in order to run the jar utility.

  3. create a jar file using the images in the folder d:\images as follows:

  a. cd d:\images

  b. jar - cvf icons.jar *.gif

  3. copy the file icons.jar in the ORACLE_HOME/forms/java folder

  4. with the help of Oracle Enterprise Manager 11 g Fusion Middleware control make the following changes to the formsweb.cfg:

  Archive = frmall.jar, icons.jar.

  b. = codebase imageBase - this is necessary if you use images from jar files.

  6. make sure that the appropriate entries are defined in the Registry.dat indicating the type of image file used for the icons. In addition, the example used here requires that the value of default.icons.iconpath be blank because the images in the jar file is not in a directory structure.

  default.icons.iconextension = gif
  default.icons.IconPath =

  NOTE: You may need to clear the cache of client jar files if you have made changes to the Registry.dat so a new copy will be downloaded.

  Reference Note: how to display iconic Images forms 11 g [960103.1 ID]

  Hope this helps you :)

  Concerning
  Carlos

• Need custom logo to display in the form menu bar

  How to change the Oracle logo on the right side of the Oracle Applications
  menu (11.5.10)
  Need custom logo to display in the form menu bar

  Regenerate you the jar files using adadmin successfully?

• Not sure how to display all the applications that I'm supposed to have with the creative cloud - constant spin in the window? [was: creative cloud]

  Trying to download my creative cloud, but get a constant rotation in the window. Not sure how to display all the applications that I'm supposed to have with the creative cloud?

  Please visit: App does not open. Wheel of progress turn continuously

  I hope this helps.

  Concerning

  Megha Rawat

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning

• How can I lock the fields after that you filled out a pdf file

  How can I lock the fields after that you filled out a pdf file

  Hello

  Please refer to this topic THAT PDF locking after filled will be a great help.

  Kind regards

  Nicos

• How to get multiple rows in the table is displayed on the form

  I am looking for a way to get more table rows that appear on the form.  I created a table with a header and a line with the add-in and remove button option.  I like how the sample purchase order form has it setup in the designer it shows one line and it appears on the form so the table has three rows to start with.  How do I do that?  I looked at the code on the sample and I couldn't find it anywhere.  Please help, thanks.

  Hello

  I have an example here in the construction of a dynamic array markets.

  http://www.assuredynamics.com/index.php/category/portfolio/building-dynamic-tables/

  You must select the line and then go to object > Binding palette and set it to repeat. You can set the minimum and initial number to what you want.

  The form should be saved in a dynamic form of XML in the Save as dialog box.

  Also the page must be set to Flowed, so that as the table grows, push another object down. In addition, you need to configure the paging settings so that the flow of the page as the number of lines is superior to a single page.

  Give a start and if you need more help,

  Niall

  Ensure the dynamics

• How to check that the form is signed to savings?

  I created a form in AdobeXI Pro with a lot of text boxes and box than one signature. I modified the properties of signature boxes to mark as required. What I need now, is a way to get the shape check to make sure a signature is present in the signature box when the form is saved and if no signature is present, produce a pop up that says "a signature is required for this form.', or the pop-up could display the ToolTip for the signature box. How can I do this?

  * Please use a step by step description, I'm new to form design and have no experience with Java script.

  My bad... Replace == null with == "" and try again, please. "

• Name of ToolTip to display in the form to fill out?

  I'm new here ! Looking for help on how I can make a text field has a name that will be displayed for the user to know what information is needed in the field, but will not display the name of the ToolTip. I searched and found that it is possible with a Javascript. However I'm not fimiliar at all with this... but can quite understand it with the help please. I use acrobat 9 standard to create my form.

  You can set the actual ToolTip text on the general tab of the field properties dialog box.

  If you want the text to display in the actual field that disappears when the field is selected and does not print, you can use the following custom Format script:

  // Custom Format script for text field
  if (!event.value) {
      event.value = "Instructional text goes here.";
      event.target.display = display.noPrint;
  } else {
      event.target.display = display.visible;
  }
  

  If you also set the ToolTip text, this code can be changed to:

  // Custom Format script for text field
  if (!event.value) {
      event.value = event.target.userName;
      event.target.display = display.noPrint;
  } else {
      event.target.display = display.visible;
  }
  

• How can I reinstall the form fill

  I am running ie 7 on VISTA, when I upgraded to IE7 I lost filling form. Please tell me how to reinstall.

  Thank you

  Thanks for the reply but that has not helped me. Maybe I was not very clear, I'm not 'AutoComplete' I try to reinstall the form fill. It works much better than the car completely and I found it very useful. So please help me to reinstall the FORM FILL IN THE IE TOOL BAR... Thank you

  I guess that you upgraded to IE9 and you want to use the AutoComplete feature.

  Press ALT + T and choose Internet Options. Box, click the content tab, and then click the settings button in the AutoComplete section. You can select the features you want to use, and then press OK.

• Treatment in the form of conditional

  I have a form to capture some general information to the contact, and I have inserted a hidden field (I called size) and gave him a static value of 0. The purpose of this is to filter spam as a bot will try to fill in this field. In the steps of treatment, I added a Post of conditional data at server stage which would only update contact information if size is 0, but I also added as an extra step if the size is not equal to 0, so do not update a contact record, and push the user to a page that indicates that they have not completed the redirect to a webpage (the default Validation result) in the form correctly. Accordingly, I have two treatment steps called redirect Web site - which is subordinate.

  rotices

  What is the right thing to do? Does anyone have experience of this kind of conditional processing? Can you advise?

  Thanks in advance.

  Hi Richard,

  You can apply it to all of the existing measures. Click on the processing step, select under certain conditions, (it will open a window), select the form field, select your field size Show, double click, it will open a condition for putting the value in, double-click on the condition, not select exactly and enter 0.

  You should be all set.

  Thank you

  Amit

• How can I get the Form Server 5.0 / LiveCycle software license key?

  I have the Form Server 5.0 software and need to get my license key to install on a different server. I looked at the LWS site and found a 2003 dated maintenance renewal. How can I get the license for this product?

  Please contact the customer service

• How to display all the data to a database with the same name?

  I am familiar with the creation of basic website, but I want to learn how to create more dynamic Web sites.

  I create a Web site where a user can register on the site and counts there. Once into account here, there will be different options they can do.

  The new application form is in the section account it is configured for a user to submit a multiple application and save it in the database, that works, but the problem I have is during the examination of the application, it does show that one of them, not all.

  How can view the request of a user, sign in?

  

  I can get to the screen, but not all.

  Is it possible to do this or any suggestions on how to do?

  Here's the code for the ReviewRequest:

  <? PHP require Connections/Connections.php"?" >

  <? PHP

  session_start();

  {if (isset($_SESSION["fname"]))}

  }

  else {}

  Header('Location:NewRequest.php');

  }

  ? >

  <? PHP

  $User = $_SESSION ['Pnom"];

  $result = $con-> query ("SELECT ALL * from newrequest where Fname ="$User"" ");

  $row = $result-> fetch_array (MYSQLI_BOTH);

  $_SESSION ["FirstName"] = $row ["Fname"];

  $_SESSION ['location'] = $row ["Location"];

  $_SESSION ['description'] = $row ['Description'];

  ? >

  <! doctype html >

  < html >

  < head >

  < link href = "CSS/Master.css" rel = "stylesheet" type = "text/css" / > "

  < link href = "CSS/Menu.css" rel = "stylesheet" type = "text/css" / > "

  < meta charset = 'utf-8 '.

  ReviewRequest < title > < / title >

  < / head >

  < body >

  < div class = "Container" >

  < div class = "Header" > < / div >

  < div class = "Menu" >

  < div id = 'Menu' >

  < nav >

  < ul class = "cssmenu" >

  < li > < a href = "Account.php" > account < /a > < /li > ""

  < li > < a href = "UpdateAccount.php" > update account < /a > < /li > ""

  < li > < a href = "NewRequest.php" > new request < /a > < /li > ""

  < li > < a href = "ReviewRequest.php" > Review Request < /a > < /li > ""

  < li > < a href = "LogOut.php" > sign out < /a > < /li > ""

  < /ul >

  < / nav >

  < / div >

  < / div >

  < div class = "LeftBody" > < / div >

  < div class = "RightBody" >

  < name of the form = "form1" method = "post" action = "" >

  < div class = "FormElement" >

  < label for = "FirstName" > < / label >

  < input name = "FirstName" type = 'text' required class = "TField" id = "First name" value = "<?" PHP echo $_SESSION ['FirstName'];? ' > ' >

  < / div >

  < div class = "FormElement" >

  < label for = 'Place' > < / label >

  < input name = "Location" type = 'text' required class = "TField" id = 'Location' value = "<?" PHP echo $_SESSION ['Location'];? ' > ' >

  < / div >

  < div class = "FormElement" >

  < label for = "Description" > < / label >

  < input name = "Description" required class = "TField" id = "Description" value = "<?" PHP echo $_SESSION ['Description'];? ' > ' >

  < / div >

  < / make >

  < / div >

  < div class = "Footer" > < / div >

  < / div >

  < / body >

  < / html >

  You would browse the information stored in the $result variable.

  $result = $con-> query ("SELECT ALL * from newrequest where Fname ="$User"" ");

  As below:

  fetch_assoc()) {? >}

  (I don't see a reason to assign data to a variable of $_SESSION?)

  You also probably would be well advised to select information based on a uniquie rather than a name id - if two people have the same name youre UNLESS you want to make sure that two identical Fname can be stored in your tabe stuffed.

  $result = $con-> query ("SELECT ALL * from newrequest where userID = '$userID'");

  userID |     Fname |     Location |                      Description

  8 the end of the road muddy and foggy

  11 this something, no idea

  8               the              rstreet                           rah

  8 is not a clue

  14 Hello Goodbye