Similar Questions

• How can I increase the space of name display in the form, material and specification of the nutritional profile?

  Problem:

  1. How can I increase the space of name display in the form, material and specification of the nutritional profile?

  2. how to increase display space for the name of the sheet in the history section at the top of the screen?

  Thank you

  Hello Nefertari,

  You try to view more characters in these areas?

  Each of these locations is plugable using custom plugin extensions.

  For example, you can go into extensions/config/CustomPluginExtensions file and add the following nodes under the node FormatPlugins.

  I think that the default values for the sites are set to 50 characters, so I had to be up to 100 characters (note NameMaxLength = parameter in the attribute FactoryURL 100).

  It will be applicable to all specifications, if you need something more specific, you will have to create your own class where you can check the type of technique.

  Make your own judgment in what concerns how enough will be the look on the screen after you increase the length to a large number, but you can always control the formatting in your own class.

  See this older post for more information https://community.oracle.com/thread/2562965

  Is that what you're looking for?

  Dmitriy

  .

• Need custom logo to display in the form menu bar

  How to change the Oracle logo on the right side of the Oracle Applications
  menu (11.5.10)
  Need custom logo to display in the form menu bar

  Regenerate you the jar files using adadmin successfully?

• my mac is the display of the comment... No backups for 13 days.  Connect to a power outlet while your backup disk is available.

  My Mac is the display of the comment... No backups for 13 days.  Connect to a power outlet while your backup disk is available.  For my time Machine control, everything seems to be saved.

  Time Machine also creates temporary copies on your internal drive when the backup drive is not available. So you can see the 'temporary' backups on your internal drive.

  I recommend that you connect your external drive and your power adapter and let make a permanent copy - ones on your internal drive are subject to deletion if space is short.

  By now he may need to do a 'deep traversal' which can take some time.

• A license is required at the VASA? A license is required for each copy? VSI is necessary to have the VASA? They are mutually exclusive? VSI need NOTTM?

  A license is required at the VASA? A license is required for each copy? VSI is necessary to have the VASA? They are mutually exclusive? VSI need NOTTM?

  Thanks in advance.

  Assuming that you are referring to EMC arrays.

  License to the VASA: No.

  VSI required at the VASA: No. they work very well together, but does require that the other.

  VSI allowing VAAI: No. VAAI is active with or without the VSI.

• Name of ToolTip to display in the form to fill out?

  I'm new here ! Looking for help on how I can make a text field has a name that will be displayed for the user to know what information is needed in the field, but will not display the name of the ToolTip. I searched and found that it is possible with a Javascript. However I'm not fimiliar at all with this... but can quite understand it with the help please. I use acrobat 9 standard to create my form.

  You can set the actual ToolTip text on the general tab of the field properties dialog box.

  If you want the text to display in the actual field that disappears when the field is selected and does not print, you can use the following custom Format script:

  // Custom Format script for text field
  if (!event.value) {
      event.value = "Instructional text goes here.";
      event.target.display = display.noPrint;
  } else {
      event.target.display = display.visible;
  }
  

  If you also set the ToolTip text, this code can be changed to:

  // Custom Format script for text field
  if (!event.value) {
      event.value = event.target.userName;
      event.target.display = display.noPrint;
  } else {
      event.target.display = display.visible;
  }
  

• Several e-mails in the form of MUSE

  I have forms on my site of MUSE. Have more tha one e-mail of the recipient in the form I get server error.

  Using a single address his work propperly.

  This does NOT work: [email protected] ; [email protected]

  It comes to along: [email protected]

  the error is most likely to your server... are you sure the correct address is not [email protected]?

• We need a solution allowing several people to download the pdf file, fill in the form and add their own password for local storage on their own computer. Is this possible? Thanks in advance-

  We want our customers to be able to download a PDF on a Web site, fill in the form, and then save and apply their own password. Is this possible? Thank you very much in advance.

  Yes, when customers use Adobe Acrobat.

• How to get multiple rows in the table is displayed on the form

  I am looking for a way to get more table rows that appear on the form.  I created a table with a header and a line with the add-in and remove button option.  I like how the sample purchase order form has it setup in the designer it shows one line and it appears on the form so the table has three rows to start with.  How do I do that?  I looked at the code on the sample and I couldn't find it anywhere.  Please help, thanks.

  Hello

  I have an example here in the construction of a dynamic array markets.

  http://www.assuredynamics.com/index.php/category/portfolio/building-dynamic-tables/

  You must select the line and then go to object > Binding palette and set it to repeat. You can set the minimum and initial number to what you want.

  The form should be saved in a dynamic form of XML in the Save as dialog box.

  Also the page must be set to Flowed, so that as the table grows, push another object down. In addition, you need to configure the paging settings so that the flow of the page as the number of lines is superior to a single page.

  Give a start and if you need more help,

  Niall

  Ensure the dynamics

• % No display on the form

  Hello
  
  I've created my account on percentage data type. But when the forms I don't get for example 50% but only 50. Is it possible to implement?
  
  Thank you

  Hello

  Have you tried - evaluation order (Administration-> size)

• Column Salary to come in the form $ does not time?

  Trying to get this works, but can't. Help, please. You will need to get the column Salary to come in the form $ instead of the time. Whenever it is multiplied by 12, it ends by multiplying by time and not by $12. So I'll take 48 h 0 m instead of $48. There are some pictures of what I am trying to accomplish. There's a picture of what is happening and another pic of my formula before you enter the time in time and get the product duration under treatment. Help, please. Thank you

  

  

  E SALVATION '

  You multiply at a range of a number. The result is lasting. That makes sense, if you do 15 minutes (duration) of exercise every day for five days (number) you have made 1.25 hours (duration) of exercise.

  For a numeric result, you need to multiply a number (hours) by a number of $ / hour. Your friend here is DUR2HOURS, which converts a duration in a number representing the number of hours:

  

  Kind regards

  Barry

• Several incoming clones with the FGV not reentrant timer

  Hello
  I want to create a launcher of timer. So I created simple timer based on a functional global variable and tried to launch several clones of her home "timer Launcher. The thing is that the timer is not reentrant (each FGV I saw was not reentrant) and I do not know how to create such a pitcher.

  Attached image illustrates the idea. So I throw clone1 (which is some reentrant VI), in this clone I have not reentrant timer but it is not reentrant in the perspective of clone 1 only. Clone 2, I have an another timer that is not reentrant from the point of view of clone 2 incoming but from the point of view of clone 1 and so on. It is quite complicated to describe, but I hope that the photo show my problem somehow.

  Help, please

  You can do this if you make your timer pre-allocate clones-reentrant and then call by reference (a reference in every clone of the Launcher timer so that each Launcher uses a clone of separate timer).

• Regions must display on the same position using time delay

  Hi all

  I use APEX 4.0.2

  I have a page with 2 reports and 3 regions of the chart. Two reports are placed on the left on the page. Graphics one by a parallel with reports (right) need to display on the page. Is there anyway to show the cards one by one, using a few delay time? Is it possible to do like that in APEX?

  Please help me on this...

  Thank you

  Lacombe

  Try this in your DA

  function x(p)
  {
    $("#" + p).show();
    setTimeout( function(){ $("#" + p).fadeOut( 3000
                                              , function()
                                                { switch( p )
                                                  { case "chart_one":
                                                    { x("chart_two");
                                                      break;
                                                    }
                                                    case "chart_two":
                                                    { x("chart_three");
                                                      break;
                                                    }
                                                    case "chart_three":
                                                    { x("chart_one");
                                                      break;
                                                    }
                                                  }
                                                }
                                               );
                          }
              , 6000
              );
  }
  $("#chart_one").hide();
  $("#chart_two").hide();
  $("#chart_three").hide();
  x("chart_one");
  

• the form validation (Checkbox) does not work for the interactive report

  Hello
  
  I use the oracle apex 4.0 and oracle 11g.
  
  I wrote a under select query on interactive report
  
  Select
  apex_item. CheckBox(1,RESIDD) | apex_item. Hidden(2,RESIDD) row_selector.
  apex_item. Text(3,RESNUM) as resnum
  of 'PDRRES '.
  
  and written validation to display the error message ( error of function return text ) as
  
  DECLARE
  vRow directory;
  BEGIN
  -apex_application.g_print_success_message: = NULL;
  
  BECAUSE me in 1... apex_application.g_f01. COUNTY
  LOOP
  vRow: = apex_application.g_f01 (i);
  apex_application.g_print_success_message: = apex_application.g_f01 (i) | » -'|| apex_application.g_f03 (vRow) ;
  END LOOP;
  END;
  
  Output: No data available error message
  
  As long as it works for sql report with above logic because apex built in line selector
  but it fails in the case of interactive report for some reason any.
  
  Please suggest.

  Saroj Nayak

  Saroj Nayak says:

  DECLARE
  vRow BINARY_INTEGER;
  BEGIN
  --  apex_application.g_print_success_message := NULL;
  
  FOR i IN 1 .. apex_application.g_f01.COUNT
  LOOP
  vRow := apex_application.g_f01(i);
  apex_application.g_print_success_message := apex_application.g_f01(i)||'-'|| apex_application.g_f03(vRow) ;
  END LOOP;
  END;
  

  You have set the value of vRow to the value of the number box i which is checked. There is probably nothing in the apex_application.g_f03 with RESIDD as index table

  What you want is hollow loop all the hidden objects g_f02
  and with in this loop through all verified elements checkbox g_f01
  and if the values of these in the game, you have your line for checking f03

  for k in 1 .. apex_application.g_f02.count
  loop
    for p in 1 apex.application.g_f01.count
    loop
      if   apex_application.g_f01(p) =  apex_application.g_f02(k)
      then
        apex_application.g_print_success_message := apex_application.g_f01(p)||'-'|| apex_application.g_f03(k) ;
      end if;
    end loop;
  end loop;
  

  Nicolette
  PS your NPA between

  { code }Your code { code } without the spaces between {, } and code 
  

• Configuration of the basic Source of time to master for the 9234

  I have several cDAQ modules I use to collect data.  I use vi to Write can Express to save data to a file of PDM.

  When you examine the recorded data files, the measured data from NI 9215 provide pleasant timestamps to match how the DAQmx task has been set up--delaying the sampling frequency of 1000 with a 1 ms in the While loop.  However, although in the same vi - different tasks, but the same while loop - horodateurs of the NI 9234 do not correspond to the task of DAQmx implemented - sampling frequency of 1000 with a 1ms delay. After reading the material provided with the NI 9234, I found that maybe the machine clean master Timebase Source. There were documents that says he can be configured to be originally of Timebase of Master for the other modules:

  Configuration of the basic Source of time of the master for the NI 9234 (Interface FPGA)

  It is desirable to have the timestamps for data measured across all modules to match. We do not have the FPGA Module for LabVIEW. Is there a method in LabVIEW for all modules use the same master time base Source?  I assumed that because all the data collection has place in the same while loop by using the time delay of 1 ms it was forced through the code. This hypothesis seems incorrect from my review of the PDM data files.

  The NI 9204 provides a trigger only.

  Software:

  Windows 7

  LabVIEW 2010 SP1

  Material:

  CDAQ-9174 chassis

  Slot 1: NEITHER 9204

  Slot 2: NEITHER 9215

  Slot 3: NEITHER 9234

  Slot 4; Vacuum

  Hi MgDAQ,

  An important concept to note is that the 9234 uses a delta-sigma converter and a clock of oversampling to read analog data. There is an inherent delay of entry due to analog and digital filtering built-in. Since the 9215 has a lower resolution there will be a lag the 9234 and 9215 finished. I've included some resources below:

  What are the for the NI 9233, NI 9234, and NI 9237 valid sampling rates? : http://digital.ni.com/public.nsf/allkb/593CC07F76B1405A862570DE005F6836?OpenDocument

  
  

  Synchronization of DSA, S and X series devices with a NEITHER-DAQmx single task series: http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument

  
  

  Synchronization with NOR-DAQmx of acquiring dynamic signals (DSA) products:http://digital.ni.com/public.nsf/allkb/A133ED27DF9BCC5986256F2E004BA342?OpenDocument

  Have you tried to put two modules in the same spot? Alternatively, you can export the sample clock 9234 and tasks installation separately.

  Best,

  CARISA