Display layout of the table breaks after the insertion of SWF object
With the help of Flash Pro CS4/Windows Vista:
I have a tabular presentation that breaks apart in Firefox, leaving gaps between cells after inserting a SWF file.
I inserted the file using the Insert > media > SWF in Dreamweaver and downloaded the SCRIPTS folder command.
When I remove the SWF object, the file is displayed perfectly (with an empty cell, where the SWF object should appear)
The SWFobject is narrower than the cell that contains 2 pixels (cell: 227w X 146 h;) SWF 225w X 146 h)
You can see the problem in Firefox at http://theflightsofmarceau.com/series.htm
I look forward to solutions - thank you.
Add this in the
of your html page
object {
display:block;
}
It will work, I've tested it.
http://www.htmlforums.com/Flash-development/t-Firefox-30-Flash-embed-problem-104790.html
Tags: Adobe Animate
Similar Questions
-
Function similar to the States of SWF objects in interactive PDF format
Is it possible, through the use of maybe text anchors and hyperlinks, to perform a function similar to the States of SWF objects in an interactive PDF? I hope that there is a clever way to allow end users to press a button that could hide/show page content in an interactive PDF file. I have experimented with a number of things without success and was curious to know if the users of the forum know a solution.
See you soon,.
Steve
You must use the functions of hide show with buttons. Not nearly simple as WHO, but it works.
The content that would be show/hide would need to be converted into buttons to make it work.
Bob
-
a layer is a shadow - a second layer I have my image - how is, that the image view is done by the shadow of an object to another layer? What is a passing fad or these effects the prints as well? If so, how can I change?
Thanks for the tips!
Angelika
Shadows are transparent. Transparency affects something with which it interacts. There is also a known issue that the screen darkens when transparency is on the page and occasionally makes in PDF format as well.
-
Display data in a table after the analog acquisition
Hello
I am almost 12 analog channels data acquisition using a single task at the frequency of 100 Hz and try to display it in a table. I've renamed all channels according to their functions and also assigned a number of material. But the problem I encounter is that am not able to find out what data comes from a single channel. The graph should look like similar to MAX table with an additional column to display the number of material as well, and I am attaching the picture of it. From now on, I tried to show all channels, number of material and the values acquired successively in three separate columns. Although it seems very well, I would like to know if there is an option to find out where a particular value channel was acquired in a task with a number of channels?
The shift register for the while loop where you collect your data should be a 2D array. Then each colum is assigned to a channel.
-
I have a Document level Javascript used to identify empty mandatory fields and fires on shares of paper, print and save. The script identifies the required fields empty, counties and outputs of an alert box indicating the number of required fields empty and lists the name of the ToolTip fields. The script identifies the required fields with an asterisk at the end of each balloon.
Is my question possible to add a space or a line break after the decimal point for each item?
Here is a picture of the exit where the items listed are all grouped together.
Here is the code:
function validateFields()
{
a counter for the number of empty fields
var = 0 flg
count all the fields of the form
var n = this.numFields
create a table to contain the names of the required fields
If they are determined to be empty
fArr var = new Array();
Browse all fields and look for ones that are required
all fields that have a ' *' in their ToolTip are required
for (var i = 0; i < n; i ++) {}
var fn = this.getNthFieldName (i);
var f = this.getField (fn);
ToolTip is the property of 'userName' of the fields\;
TT = f.userName var
test the ' *';
If (TT. IndexOf('*')
! =-1 & & f.value == f.defaultValue) {}increment the counter of empty fields;
FLG ++;
Add the fields username (ToolTip) to the list of the names of fields empty.
fArr [fArr.length] = tt;
}
}
now display a message if there are blank fields
if(FLG>0) {}
App.Alert ("there are '+ flg + areas that require a value\n\n' + fArr, 3")
}
else {}
This.Print ();
}
}
The required property is very easy to use. It's just a Boolean (true/false) value, then you can use it like this in your code. Instead of this line:
If (tt.indexOf('*')! =-1 & f.value == f.defaultValue) {}
Use this:
If (f.required == true & f.value == f.defaultValue) {}
-
Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep
Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep
If you have another Thunderbolt cable, plug it into the unused port on the
Thunderbolt Display and then in the Mini and see if the same thing happens.
What you can see is a precursor of the poster, built out of the cable.
At least, it could eliminate a costly repair problem. Although the cable itself is not
expensive, opening to the top of the screen of TB to replace could be.
Well that not connected on a Mini, I began to see in similar behavior my
iMac, so that there was finally a break in the complete cable.
-
My e-mail text doesn't display correctly in the preview pane after upgrade to V38
I upgraded from 32.0 to 38.0 today. After that I upgraded my emails are not displayed correctly. When enamel is reduced in the preview pane, the text appears in a single line and is truncated at the end of the right SIDE of the pane. When enamel is developed in the preview pane is displayed none of the electronic text. If I open the email in a new window, none of the text of the email is displayed. With the 38 version I can't read the email.
I've downgraded to version 36 and the frozen problem existed. I uninstalled V36 and everything stopped and restarted then installed V32 and all is good again. I don't know what version between 32 and 36 problems began. I would like to get current.
If anyone can help with this?
It is rather difficult to diagnose when you uninstalled software.
I suggest you reinstall it and try safe mode (hold down the SHIFT key while the program starts). This disables modules and there is a good chance that it's an incompatible add-on or theme that is causing.
-
After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.
Mac OS X 10.7.1
Firefox 6.0.2
Flash 10.3.183.7The current versions of Firefox are 64-bit on OS X, if you need a 64-bit version of Flash with Firefox 6.0.x or you must start Firefox as a 32-bit application to be able to use a 32-bit version of a plugin.
- Closing of Firefox
- Launch the Finder and open the Applications folder
- Make a right click or Ctrl-click the icon of Firefox.app
- Select "Get Info."
- Select or deselect the option "open in 32-bit mode".
- Close window "Firefox Info"
- Restart Firefox
-
Hello. There is a problem on the IPhone s 5 - after reset, the display flashes on the sides for 10 minutes, then the flashing stops. And the problem does not appear again until they do not use a Hard Reset (Power + Home).
The phone is new (5 days). It's a wedding?
If you encounter this flicker, then the next troubleshooting step is to restore from a backup. If the behavior persists after the restore, then the last step is the factory restore. If after the factory restore and adding no additional content, you see always this problem, then you must make an appointment at the Genius Bar to the nearest Apple store or service provider authorized Apple to have the material examined. If the behavior goes after the factory restore, then sync again your content manually, without using the backup. It seems to me it's corrupted content in the backup.
Restore your device from an iCloud or iTunes backup - Apple Support
Use iTunes to restore your iPhone, iPad or iPod settings - Apple Support
-
After installing windows optionally updated my display driver is the cause of problems
I have DELL Inspiron 14 with windows 7 home preium
After installing windows optionally updated my display driver is the cause of problemsRan troubleshooting it says "material changes could not have been detected.Help, pleaseThank youUse the function "restore" to restore your system to a point before installing optional updates in windows.
After that, go to Windows Update and 'hide' the update that caused the problem.
-
Hello
I use Oracle Database 11.2.0.4.
After reading the documentation on how to prevent unwanted table DDL statement.
I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.
Turn it off doesn't work, however I can not re - activate.
The error message is:
ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired
I want to activate the lock, because I need to add new columns to this table.
I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.
Impossible to activate the table lock after disablng it
ALTER table enable table lock blocking
However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)
'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »
By the way:
1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).
2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.
It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?
The table itself is located on the stops and never schema of production on which transactions take place continuously.
Is it true that Oracle expects all execute transactions? Is it known bug?
Why would Oracle wait as all transactions which has nothing to do with the underlying table?
Is there no workaround solution to solve this?
Note:
I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.
Kind regards
Buntoro
Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,
--
John Watson
Oracle Certified Master s/n
-
Mr President.
Is it possible that when the new record is inserted in a table then this empty inserted record is automatically displayed without scrolling?
Because I change the size property of the table 5 range and my new record is inserted at no 10.
When I click the addRecord button the new parallel line does not appear, do scroll down to see it.
I want that we don't have to scroll down.
The line is displayed automatically.
as shown in the photo my behavior of page.
Concerning
If you just need the newly created line to be visible,
You can simply set contentDelivery = 'immediate' and displayRow = "selected".
P.S. the blog mentioned above only.
See you soon
AJ
-
I CAN QUERY A TABLE EVEN AFTER THE DELETION OF THE DATA FILE
Hello
Can someone explain to me the reason why I am able to interview some tables even after the deletion of the data that are associated with file?
SQL > select table_name, tablespace_name from dba_tables where owner = 'SCOTT ';
TABLE_NAME, TABLESPACE_NAME
------------------------------ ------------------------------
TEST2 USERS
TEST USERS
SALGRADE USERS
USERS OF BONUS
USERS OF THE EMP
USERS OF DEPT
6 selected lines.
SQL > exit
Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - Production
With partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@localhost orcl] $ rm /app/oracle/oradata/orcl/users01.dbf
[oracle@localhost orcl] $ sqlplus scott/scott
SQL * more: Production version 11.2.0.1.0 on Mon Mar 30 21:35:54 2015
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With partitioning, OLAP, Data Mining and Real Application Testing options
SQL > select count (*) from test2;
Select count (*) from test2
*
ERROR on line 1:
ORA-01116: error opening the database file 4
ORA-01110: data file 4: ' / app/oracle/oradata/orcl/users01.dbf'
ORA-27041: could not open the file
Linux error: 2: no such file or directory
Additional information: 3
SQL > select count (*) of the test;
COUNT (*)
----------
5000
SQL >
The first output is as expected. But why am I still able to query the table of test, even if the data file has been deleted.
Hello
The process of database have a file handle for the data file - this remains even when the file is deleted (it disappears from the normal file system navigation)
You can see if you have lsof installed
just try
lsof | grep datafile_name
Once the database is restarted and the released file handle so you will not be able to do this any more - and in fact you will get errors when it can't find the file.
See you soon,.
Rich
-
How the first column heading must be repeated if the table breaks across pages
Hi Experts,
RTF model, header row in the table automatically repeat if record go to the next page. in similar fasion, I want to repeat the first column heading, table breaks on any page.
Please help reslove this issue...
Hello
You can add the tag to the first column and the first row of the table. It will repeat 1st column when table to break across pages.
Here 1 means, repeat first column when table to break across pages.
I hope this will solve your problem.
P.S. If you provide 2, this means, repeat for column 2 of the table through the pages
Please check the issue as resolved, if that answers your question. Thank you
-
Correct use of the page-break-after
Hello
I don't know that it is a simple question for you.
I have LONG pages of stuff on the web for people to print, and I wish they were able to print in a very specific way-
I want to decide when the page "breaks".
On the web, I saw simple HTML, but also JAVASCRIPT solutions - and I like to keep the solution as simple as possible.
On this forum, there are a few discussions of pagebreak, but no simple and final solution.
In your opinion, does the following work?
< html >
< head >
< style >
{.breakhere}
page-break-after: always ;}
< / style >
< body >
Page 1
Page 1
Page 1
Page 1
Page 1
Page 1
Page 1
Page 1
< div style = "breakhere" > < / div >
Page 2
Page 2
Page 2
Page 2
Page 2
Page 2
Page 2
Page 2
< div style = "breakhere" > < / div >
Page3
Page3
.
.
.
< / body >
< / html >
Have a look here http://css-discuss.incutio.com/wiki/Print_Stylesheets
However, the best solution for printing, is to use a PDF file, what they are for. Create a PDF file containing the same data. You have total control over the printing format in this case. Have a look here http://www.fpdf.org/
Maybe you are looking for
-
Beats on my 20 want suddenly to his terrible
I wanted on my new 20 a few days ago, and I noticed that my sound is not working. Then I go into my properties audio beats and its says that "the program currently does not work, restart your computer to confirm changes" and I have even not all of th
-
Paste an object floating in the new doc Pages?
Exactly, what determines where an object is pasted into a document Pages 09 and is it possible to click and point so a floating image is inserted at a specific time? I work with two very large documents (900 inches wide by 11 inches high) containing
-
Recently, I unplugged the power supply current to work elsewhere in the House. When I reconnected the power running and left the computer had entered a deep sleep mode. He did wake up, and I could go on until the task was completed. Yet once I lef
-
Signing server down again?
Last night I tried to export my version of my application build, but it got stuck at the signing with an error saying "Error: server cannot process your request at this time, please try again later." So I went to bed. But now the morning again its gi
-
Digital copy does not not in Windows Media Player
I downloaded a digital copy of a DVD, and when I try to open it in the video file it says: Windows Media Player cannot play the protected file. The player has detected that the connection to your hardware isn't sure. I have improved the security of W