Display message on each page

Similar Questions

• How can I disable the "single cartridge" message after each page (J110a printer)

  I just bought this printer to print only in black ink.  It works fine, but after I print every page I get a message...

  > When the HP printer operating mode single-cartridge, a message appears on the screen. If the message appears and two ink cartridges are installed in the product, make sure that the piece of plastic tape protection was removed from each print cartridge. When the Ribbon plastic covers of the print cartridge contacts, the product cannot detect the cartridge is installed.

  This message is useless and annoying.  It seems to be a blatent attempt sell color ink.  How do I turn it off?  Please answer quickly, that my time is running out to return the printer to the store because of this

  Thank you

  This widget could not be displayed.

• Display Messages customized login Page

  I use a custom with APEX 4.1.1 authentication and I want to display error messages that are customized on the login page if authentication fails. In my authentication function, I use apex_util.set_authenication_result to set a result code (code below). I tried to use the apex_util.get_authenication_result on the login page to hide and display custom messages, but it does not work. I don't think that the apex_util.get_authenication_result is in fact to get the result? I'm doing something wrong? Is there a better way?
  

  FUNCTION verify_user(
      p_username VARCHAR2,
      p_password VARCHAR2
    ) RETURN BOOLEAN
    IS
      v_ctr      NUMBER;
      v_id       NUMBER;
      v_attempts NUMBER;
    BEGIN
  
      SELECT COUNT(1) INTO v_ctr FROM users_tbl 
         WHERE username = TRIM(UPPER(p_username)) 
         AND password = utl_raw.cast_to_raw(dbms_obfuscation_toolkit.md5(input_string => p_password || TRIM(UPPER(p_username))));
  
      IF v_ctr = 1 THEN
  
        SELECT user_id INTO v_id FROM users_tbl WHERE username = TRIM(UPPER(p_username));
        UPDATE users_tbl SET login_attempts = 0 WHERE user_id = v_id;
        APEX_UTIL.SET_AUTHENTICATION_RESULT(0);
        RETURN TRUE;
  
      ELSE
        SELECT COUNT(1) INTO v_ctr FROM users_tbl WHERE username = TRIM(UPPER(p_username));
  
        IF v_ctr = 1 THEN
  
          SELECT user_id INTO v_id FROM users_tbl WHERE username = TRIM(UPPER(p_username));
  
          SELECT login_attempts INTO v_attempts FROM users_tbl WHERE user_id = v_id;
          IF v_attempts > 5 THEN
            APEX_UTIL.SET_AUTHENTICATION_RESULT(2);
            RETURN FALSE;
          ELSE
            UPDATE users_tbl SET login_attempts = login_attempts + 1 WHERE user_id = v_id;
          END IF;
  
        END IF;
  
        APEX_UTIL.SET_AUTHENTICATION_RESULT(1);
        RETURN FALSE;
  
      END IF;
  
    END verify_user;

  Thank you
  Mark

  Hello

  Thank you.

  In your example, it's that you have used the page element.
  In this solution, you must use the application to store the custom login message.
  I have fix your example. Please check

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#Cure please!"

  When I try to open my homepage from Yahoo using Firefox I get a panel display message 'connection to the server was reset while the page is loading. Try again "#".
  Cure please!

  Do you find it with other browsers?

  If not, then try asking using Firefox for a.

  That you get with other sites with Firefox?

• BI Publisher - how to display the number of lines displayed at the bottom of the table on each page

  Hello

  We are the conversion reports Actuate BEEP and not able to understand how to view "Accum.Total = < n >" at the bottom of each page. In the attached report to operate it, "Accum.Total = < n >" must be displayed at the bottom of each page where < n > is the number of lines displayed on the current page and previous page.
  
  For example, if there are 10 rows in the result set, if the 1st page displays 4 rows, 2nd page displays 3 rows and 3rd page is 3 lines and then Accum.Total = 4 on page 1, Accum.Total = 7 on page 2 and Accum.Total = 10 on page 3.
  
  Note that we use the property table "allow the lines to break Pages = False" as we do not want a specific line can be split across pages.
  
  I enclose a sample of report actuate, rtf, BEEP and XML report for testing file.
  
  Approach used so far-
  
  1 > I tried to put the counter in the footer, but it seems that only the fields that come directly from the IC can be used on the header/footer. No matter what form text field or variables defined in the report.
  
  2 > I used approach given in the link below. Using this approach, I am able to view a coded value hard at the bottom of every page (just below the table) but his does not work for the variable (in my case the counter c1).
  
  https://blogs.oracle.com/xmlpublisher/entry/continued
  
  3 > on Google, I found a few articles on the page break conditionally as display only certain numbers on a page or the page by section break but in our case, its dynamics and its number of lines to display on a page is driven by data, so I could not think of a certain condition to use in "Condition." ": If" for use as a page break.
  
  Thank you

  Richa
  

  Watch see the-Report

  http://docs.Oracle.com/CD/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#do_bf_cf

  Download the https://blogs.oracle.com/xmlpublisher/entry/continued sample

  Add

  <>

  name = "contd_footer".

  format = "99G999G999" / >

  After the field "Footer."

  If need to use a footer to display the meter then and sous-modèle with code above and call it in footer

• How to display the watermark to each page number?

  Hello.

  app.documents.item(0).watermarkPreferences.watermarkText = "page";
  app.documents.item(0).watermarkPreferences.watermarkVisibility = true;
  
  

  These are all same watermark settings.

  It is impossible to set a nonzero value of the element.

  I want to display the watermark to each page number.

  If there is no way, I want to create this similar feature.

  Any ideas?

  And please tell me if the function already exists.

  Thank you.

  I think I know what you want.

  You need a different watermark to each page of a document.

  Which seems not be possible since watermarkPreference is not a preference of page but a preference document.

  If you need this for the PDF export for example, you can export single pages in single PDF files and change the watermarkText according to the name of the page you are currently exporting.

  After the export of all pages you could assemble in Acrobat Pro. Or place them in InDesign page-by-page and export again to a multipage PDF document.

  // ExportPages-ChangeWatermarkForEveryPage.jsx
  // Uwe Laubender
  
  /**
  * @@@BUILDINFO@@@ ExportPages-ChangeWatermarkForEveryPage.jsx !Version! Mon Dec 14 2015 20:28:23 GMT+0100
  */
  
  var doc = app.documents[0];
  var pages = doc.pages.everyItem().getElements();
  
  // You can also assign a preset by its name
  // For simplicity here the second preset listed in assigned:
  var pdfExportPreset = app.pdfExportPresets[1];
  
  // Loop through all the pages:
  
  for(var n=0;n
  Hope, that helps.
  Uwe
  		   

• need to display data from headers on each page

  Hi gurus,
  I need to display the header of the data on each page. It does not appear when data on the next page. Please help me.
  
  Thank you
  Sri

  I have you sent a response to your email and provided the modified model. If all goes well, the release is by your expectations.

  Thank you
  Bipuser

• Need to display a field for each page

  Hi all.
  I'm trying to display a field <? job_no? > for each page of this work.
  I mean if I select job is between 1 and 10. for the number of Job 1, the data can be printed in one or more pages.
  But I need to show this job number (that you see with barcode fonts) in all the pages of this work.
  This work is under Group G_JOB. In general, I used as below
  <? for-each: G_JOB? >
  <? job_no? >
  < ?... ? >
  < ?... ? >
  < ?... ? >
  < ?... ? >
  < ?... ? >
  <? end foreach? >
  It's getting printed on the first page only. If I put it in the header of RTF file, it's ok, if I have chosen the number one job. But if I select for a number n of jobs is not posting.
  Help, please.
  Thanks Vasa.

  Vasa,

  Try this:

  The ' start: body "did everything that precedes a page header.

  Kurz

  Published by: Kurzweil4 on February 7, 2011 13:15

  added @section. This will reset the header for each job area.

• Group by point on each Page display

  Hello
  I created a standard table using the Table Wizard. Is it possible for the Group of the item should appear on each page? I am able to repeat the line header on each page, but not able to display the group in question if the data continues on several pages. I know it sounds simple, but I focused on documents and online, but have had no success with this. Any help is appreciated, thanks.

  I sent you the modified model. Please take a look.

  Thank you!

• How to force the vertical scroll bar to display on each page?

  Hello

  Is it possible to force the vertical scroll bar appears on each page, even if it is not needed?

  I have a site with pages larger than the browser window, and others which are smaller. The scroll bar appears only on adults and forcing elements from left to right on the left to navigate through the pages.

  Any help would be appreciated.

  Thanks in advance

  VM

  In the section header of Page Properties try adding the following code:

• Why each 'page info' is not within the parameters of plug-ins?

  When I check my plugins, add ons, updates, there is the option blocks right that define whether or not to 'Always enable' or 'always ask '. My question is:-for each page that opens, there is an "information page" option, we can check to see/check what is allowed or blocked under permissions... And * what permission settings "" ARE for this * page. Why EACH page does not display the settings of permissions that we already have on the screen * (?) plugins. EACH page must have the permissions again for EACH domain/server/site provider. Why * are not the settings on the screen of Plugins used * AS 'Default' for each page/site/domain, etc.. ? Note *-If I do not change permissions to "allow" for some plugins page won't work *.

   Also, the "Java Deployment Toolkit 7.0.450.18  10.45.2.18" still* shows as "Vulnerable" After* updating (verified update*). So I found the option to 'Disable' this particular plugin. Now it displays at the bottom of the Plugin page, greyed out.  However*... after updating to Java "SE7 U45" (..for 1 [One*] day ONLY, it showed as Up-to-Date, NOT vulnerable, on every 'page info' screen*) ... and Actually, it Still Does show as Up-To-Date after an Update check*..(??)... But on EVERY page info screen the "Java(TM) Platform SE7 U--Vulnerable Plugin!"  is displayed (?).  How can it be Up-To-Date and OK on the plugin check screen,  but show as a "Vulnerable Plugin" on EVERY 'Page Info' screen?
  

  Hello jhudson253, the parameter of plug-ins that you select in the addon Manager will be the default for all sites, unless you choose something else for a particular site. This could be useful in a situation where you usually want to retain a disabled plugin, but need to work on one site for example...

  regarding the java plugin, now firefox will consider each version of the plugin (current or not) as vulnerable by default: this step has been taken due to the recording of bad security of oracle in the past (seated on fixed vulnerabilities for months).

• Is there a way to default the parameter to 140% zoom in on each page?

  I'm new to firefox, opera used for years, I tried to find a way for each page to be displayed to 140% zoom view since I was poor vision. I think I can I can use Ctrl + to zoom in, but I have to do it on each new page.

  There are some add-ons that can be used to change the zoom level on all sites, for example:

  • NoSquint - https://addons.mozilla.org/firefox/addon/nosquint
  • Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level

• DeskJet 930c: avoid the aliignment page after each page

  Hello, since I changed the black ink cartridge the printer prints an alignment with full black rectangles header page after each page I need to print. Is there a way to stop this behavior unconditionally

  Hi @guy_c,

  Welcome to the Forums of HP Support! I read your post and see that the alignment is printing after each page, after changing the cartridge. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  This problem occurs for one or two reasons, a problem of power, recharged cartridges or dirty contacts.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Reinstall the cartridges.

  I have provided a document for the cleaning of the cartridge and printer contacts, to see if that can help in this situation. Supplies HP inkjet - printing cartridge errors.

  You use genuine HP cartridges?

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  Please let me know the results. Thank you.

  

• Printer through Microsoft problems. -Printer prints a details page after each page I print

  I had problems with my printer, printing a message page after each page to print. Even if I prtint 5 pages in a row, there is a page after each copy that indicates: in the format below:

  File name,

  Directory,

  Model,

  Title,

  Object

  Author,

  Key words,

  Comments,

  Date of creation,

  Number of change,

  Last record

  Last saved by.

  Total editing time,

  Last impression,

  From the last complete printing, etc.

  I had the Brother printer people help me and they say that it is the problem of Microsoft Software.

  How can I get rid of this annoying and useless prolblem. It cost me tons of sheets of paper wasted with the information above on any paper that is printed?

  The support of brother confirm that the version of your installed printer software is supported in IE9 (yet)?

  Printing webpages in Internet Explorer 9: FAQ
  http://Windows.Microsoft.com/en-us/Windows7/printing-webpages-in-Internet-Explorer-9-frequently-asked-questions

  You cannot print or preview before printing a Web page in IE9 (15 Apr-11)
  http://support.Microsoft.com/kb/2409656

  You cannot print or print preview the Web pages in IE7 & higher (Win7 or Vista)
  http://support.Microsoft.com/kb/973479

• I can not download the trial version after effects CC show me a message in the page: we are experiencing some problems, please try again later. If the problem persists, contact customer support.

  I can not download the trial version after effects CC show me a message in the page: we are experiencing some problems, please try again later. If the problem persists, contact customer support.

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  Maybe it's a false error that hides the real problem... a 32-bit computer

  You MUST have a 64-bit computer and operating system... What is your computer?

  -http://windows.microsoft.com/en-AU/windows7/find-out-32-or-64-bit

  -Programs are supposed TO not view or download if they are not installed on your computer

  -http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html