display of the Tablet does not work, but is external?

I have an x 200 tablet with Windows 7 (clean install) and all the latest drivers.

When that I start, the screen of the Tablet works fine, even displaying the Windows page at startup.  But then it fades to a pale gray, where the background is not very visible.  When I connect to an external monitor via VGA, the external monitor works fine while the tablet screen is not.  If I try to restart, the two screens work well all stop and start the dos system, but the tablet screen fades again at the same point when starting up?

Any ideas?

It could be the graphics driver, being discussed in this post.

Tags: ThinkPad Notebooks

Similar Questions

  • Satellite A350 - Touchpad does not work, but an external mouse works

    Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).

    I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.

    What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*

    Thank you, and sorry for my bad English. :-(

    Hello!

    The touchpad does appear in Device Manager or you have here yellow exclamation points?

    Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
    Did you check that?

    In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • HP7520 Scan of the computer does not work, but the impression is

    I got a HP 7520 for awhile now, and I used to be able to scan to the computer without any problem.  However, after the upgrade a computer to WIndows 8 and re - install the HP software, that no longer works.  I left the office as a desktop Windows 7, but have the same problem - again, printing but wireless "computer scan" is not "work and my computers both say a scanner is not installed."  Ive tried several ways to install scanner drivers, but no dice.  Should this quite expensive multifunctional device now go on the pile of junk?  If so I'm passing to Epson - I had enough problems with the HP hardware!

    I finally understood that - why it should be so hard to find, I don't know, but thank you for having me on the right path BH - even though she wasn't quite specific instructions for my computer.

    I have Windows 7 and Windows 8 machines, but it was the same resolution for both:

    Installation of a network scanner

    1. Click here to open the. network

    2. Locate the scanner, right-click and then click on install.

    3. Follow the instructions to finish adding the scanner

      A very simple solution, but it is not easy to find, or intuitive to navigate.  In any case, my rear multifunction device works again, thank God!

  • Tecra M7: Tablet does not work after closing the lid

    Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

    Does not happen on hibernate or sleep.
    I have the set cover to do nothing on close.

    Hello

    What do you with Tablet does not work after closing the lid?
    Is - what the laptop freezes or what? What happens exactly?

    Closing the parameters adjustable lid to Hibernate or standby mode or no action.
    These settings can be defined in configuration power saver actions.

    If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

    Best regards

  • BlackBerry Smartphones ALT/O command to display the messages does not work on 7.10; Anyone know another shortcut?

    ALT/O command to display the messages does not work on 7.10; Anyone know another shortcut?  I know that I can get all messages sent via Options, but too heavy to do it and then cancel it.

    do an advanced search using the options. Once you are satisfied with it, you can save it and assign it to Alt - O.
    If you do this, remember to remove any other shortcut search which may exist.

  • Yahoo page does not work. It seems that java does not work, but I have the latest version installed. Yahoo email page has all scrambled together all left links

    Yahoo page does not work. It seems that java does not work, but I have the latest version installed. Yahoo email page has all the links scrambled together on the left side of the page. Same thing with face book page. All use them to work properly. 64 Waterfox win 7

    Do not use waterfox, it is not supported and is a non-official version of Firefox that often has known bugs. Downlaod Firefox from www.getfirefox.com, uninstall waterfox, then try again.

  • Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

    Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

    Try Firefox SafeMode to see how it works there.

    A way of solving problems, which disables most of the modules.

    (If you use it, switch to the default theme).

    • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
    • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

    Do not choose anything at the moment, just use 'continue in safe mode.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

    If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.

    http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

    Can be caused by an add-on to the AVG.

    When find you what is causing that, please let us know. It might help others who have this problem.

  • How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

    How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

    Version OS X?

  • zynga took my moms account and changed password for facebook and e-mail, she followed the steps to change the password, but the link does not work

    I gave this e-mail address to answer to another email user but my password has been changed and nt theres initially asked

    zynga took my moms account and changed password for facebook and e-mail, she followed the steps to change the password but the link does not work as it changes the password of my account, she tried this link 3 times now is there anything else she can try.

    Hello

    ·        What operating system is installed on your computer?

    ·        What browser do you use to connect to the internet?

    ·        Which email service provider you are talking about?

    Because the problem is linked to facebook I suggest you to post your query on facebook forum for assistance:

    http://www.Facebook.com/help/community/

  • My labtop sound works, but when connect the headphones does not work

    My labtop sound works, but when connect the headphones does not work. Note that the headset before 1 HR was working.

    Hello

    ·         Are these USB headset or headphone jack analog standard?

    ·         What version of the operating system is installed on the system?

    If you continue Windows 7 or Windows Vista refer to the procedure in method provided below and check if they help to resolve the issue.

    Method 1:

    Step 1:

    You can check if the headphones are activated as a playback device. To do this, see the following steps:

    (a) the Pearl-click Start and type Sound in the start search box.

    (b) in the Start Menu Options, select change adapter settings .

    (c) then, on the Read tab, right-click and select Show hidden devices and Show disconnected devices if they are available.

    (d) select headphones and select

    Step 2:

    Also try to put headphones of default device and check, follow the steps below.

    (a) go to Start and click on Panel.

    (b) click Sound, and then a new window will open.

    (c) in the new window click on the "Playback" tab and right-click in the window and click on Show disabled devices.

    (d) now check if headphone is listed there and right-click on it and choose activate.

    (e) highlight this helmet and click on "as default'.»»

  • I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

    I have rebuilt my laptop Gateway MX6625, did not drive recovery, is went to the gateway web site, all the drivers have worked except the multimedia sound. The gateway was no help, they told her, but the there does not work

    Hello JesusVigo,

    Thank you for visiting the Microsoft answers community.

    Have you tried to use the disk of Windows XP, or Windows Update running default drivers to search for best driver for your sound card?

    Also, I found only 1 driver on your system gateway Web site is located here.

    Hope this helps Chris.H
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • just has got rid of the virus and responsible for all the disks but given the wifi does not work

    WiFi doesn't work do not

    just has got rid of the virus and responsible for all the disks but given the wifi does not work

    Hello

    Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
    for problems known.

    Actually, try updating your driver:

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I have a hp m175nw printer. email prints from my iphone, but the image does not work

    M175nw printer. email prints from my iphone, but the image does not work

    If the DPI (dots per inch) is less than 100, the printer will not print the photo because it would be too low in quality. Draw the image on the computer, then right-click on it and click Properties, check the horizontal and vertical dpi and see if these figures are less than 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint peak? AirPrint road doesn't have the same requirements on IPR as the ePrint.

  • Satellite C660 - keyboard does not work but the Num and caps lock shift are on

    I have a Satellite C660 which was working fine this morning. When I came home from work and he turned, the keyboard does not work and therefore can not enter my login information.
    The Num and caps lock shift are turned on.

    Any ideas on how to solve this problem?

    Hello

    You are able to disable the CapsLock and NumLock?
    You can access the BIOS by pressing F2 by turning on the device?

    If this does not work, I would recommend checking an external USB keyboard.
    If the USB keyboard would be functions, then this means that the internal keyboard is defective and must be replaced.

  • A2109 autorotation Tablet does not work

    Autorotation on my recently purchased A2109 Tablet does not work. I look in the settings and the field of automatic rotation has not been highlighted, so, I can't choose to turn it on. The Tablet has the Android OS jellybean and I've had to date, but in vain. Can anyone help?

    Thank you

    OK problem fixed

    It seems that screen lock switch is not the best quality. After Pentecost fidling it screen rotation is enabled.

Maybe you are looking for