A2109 autorotation Tablet does not work

Similar Questions

• Tecra M7: Tablet does not work after closing the lid

  Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

  Does not happen on hibernate or sleep.
  I have the set cover to do nothing on close.

  Hello

  What do you with Tablet does not work after closing the lid?
  Is - what the laptop freezes or what? What happens exactly?

  Closing the parameters adjustable lid to Hibernate or standby mode or no action.
  These settings can be defined in configuration power saver actions.

  If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

  Best regards

• Sceem to my Tablet does not work

  Hello

  I have a tablet surface miscrosoft, after I turned it on and you try to drag the screen.  It does nothing, the stay of the screen on the start of the start page.  What I can do, I always put it after the fact is not in standby mode.

  My brother to just help me to solve this problem, but I can not remove this messages using the Remove feature does not work on the web site

  Thank you

  Janz

  Hello

  I don't have any keyboard attached to it, maybe I did of course try it next time.

  My brother just told me I can restart the Tablet by pressing the button for 10 seconds and it could restart.

  After the Tablet restart the job from the rear screen.

• Trust Tablet does not work

  Hi all!

  Recently I bought the Tablet Trust TB-5300 and faces a problem: I can't draw anything using it! When I try to draw a line, nothing happens. Sometimes, when I press several times on the Tablet, he made some points on the screen, or when I shoot with a large pressuse on it - it draws. But only straight lines, I can't draw a curved line (it takes a point, I said drawind and a point of arrival and it connects).

  Tried to change the sensitivity in the control panel and settings of the Tablet - no luck. What is interesting - I have this problem only in PS. In Corel, it works fine.

  What can I do else?

  Communicate with confidence and ask for an updated driver.

  Perhaps they are not aware that their drivers do not work :-)

• Portege M750 - Tablet does not work after upgrade to Windows 7

  Got an upgrade of Windows 7 through Toshiba for my M750 tablet pc. Everything is smooth and seems to work, except the (!) the Tablet functions. The pen is not recognized. Touch a little, but unpredictably.

  Please let know us what I can do.

  Thank you

  Hello

  All devices are properly recognized in Device Manager? Did you check that?

  As far as I know, you need to install or update the driver Dual Touch. This dirver is for screen digitizer and touchscreen model. It enables the feature that the Tablet PC pen or a finger can be used as a pointing device.
  You can download this driver on the Toshiba site.

  Check it!

• display of the Tablet does not work, but is external?

  I have an x 200 tablet with Windows 7 (clean install) and all the latest drivers.

  When that I start, the screen of the Tablet works fine, even displaying the Windows page at startup.  But then it fades to a pale gray, where the background is not very visible.  When I connect to an external monitor via VGA, the external monitor works fine while the tablet screen is not.  If I try to restart, the two screens work well all stop and start the dos system, but the tablet screen fades again at the same point when starting up?

  Any ideas?

  It could be the graphics driver, being discussed in this post.

• After the upgrade to Windows 8, "Life of Kanvus 106 graphics tablet" does not work in Windows 8.

  Original title: Life Kanvus 106 Graphics Tablet & Windows 8

  My Tablet worked fine on two screens under Windows 7 64-bit and upgrade to Windows 8 showed not as incompatible on the implementation of control.

  The manufacturer (Kanvus) says he didn't intend to write Windows 8 drivers for this product.

  Just wondering if there was a solution to this...

  Thank you

  I just the Kanvus artist 127 and I had the same problem.

  After a bit of diagnostics and Googling a bit, I managed to solve the problem by installing the drivers of Genius.
  • In Device Manager, view by connection and find the USB device.
  • Right click and select Properties
  • Under details, select hardware ID from the dropdown property.
  • Look for the first part of the ID (right click and copy). Mine is USB\VID_172F & PID_0500
  • You should find a device that matches.
  • I found most of the devices Kanvus is also obtained by genius.
  • You can try to go directly to http://www.geniusnet.com/wSite/lp?ctNode=174&CtUnit=156&BaseDSD=10&mp=1 and look around. The devices look pretty similar, just different colors.
  • Most of the devices have drivers Windows 8 produced by genius and they work wonderfully for me. All features are supported, as well as a few that Kanvus didn't.

  My unit is the equivalent of G - Pen M712X. The device ID's match so that the drivers install without any problems.

  Don't forget to uninstall the existing drivers. I would suggest disconnect your Tablet once drivers are uninstalled and viewing devices hidden in Device Manager, and then deleting the remains.
  Once you're done, install the drivers of genius as usual by installing everything first and then connect the tablet.
  If all goes well, you should be running.
  The drivers work fine for everything I tried so far, including Photoshop and GIMP.
  It may be useful

• Trust Tablet does not work well (windows 7 64-bit)

  Hey guys!

  I recently bought a Tablet trust (trust e brush) and I when installed on windows xp with the supplied drivers, it worked perfectly. However, in windows 7 64 bit, it works well. When im hovering over the surface of the compressed thw he assumes im clicking and the cursor is still trembling. When I touch the surface, the cursor still shaking! Ive tried all the drivers, disabled tablet pc service and everything and nothing works :(

  Can you help me?

  Thanks for the reply!

  I finally found the problem!

  If I shut off power and use the power of batery the Tablet works well!

• autorotation does not work after update 8, 1 wind - W510

  

  I have a tablet with docking station and 32 GB w510

  the autorotation feature does not work after update to 8.1 windows. the lock button does not work and there is no option for the autorotation lock in the settings.

  I ve installed the latest driver form acer download page and Windows update.

  then I tried a clean install of windows 8 and yet once installed can I 8.1 and it still does not work.

  What can I do?

  PS the camera does not work

  

  -solution for me! ----

  I don't know what happened, but I'll tell you what I did not last:

  I have the European version of Windows 8.1 N(without Media Feature Pack)

  1. reinstalled microsoft silverlight.
  2. search for update---> silverlight update available!---> installed!
  3. reset
  4. installed the 'Media Feature Pack for N and KN from Windows 8.1 versions"from here: http://www.microsoft.com/en-us/download/details.aspx?id=40744
  5. reset
  6. Search again---> new available updates updates---> installed
  7. reset!

  now, camera, autorotation and all the apps work for me. I hope this will help you

  Best regards

• AT10-A-103 Tablet does not supply power to the top

  Hello

  I have the following problem
  my tablet is not at all responsible.

  Despite the fact that I was able to turn on all the percentage indicates zero, and time when the connection to the wall outlet immediately turns off.

  Please, quick help and best regards.

  + The message has been published: name of the Tablet has been added.

  I put t know which device you have, but that looks like the battery isn't recognized by the system and therefore the Tablet does not work without the socket.

  Would it be a bad battery?
  Perhaps.

  Have you tried resetting the Tablet?
  Press and hold the power button / stop and the volume up button.
  After a few seconds the tablet should access the recovery mode.
  Now you should be able to choose the reset option that would set the default system Android tablet.

  But to be honest, I doubt that this could solve your problem, because to me, it looks like a hardware related issue.

• Dell coming Pro 11 (7130) does not work with dock station (K10A) and mobile keyboard (K12A)

  Hello! There is a problem with my Dell place Pro 11. The Tablet does not work in conjunction with a docking station with a keyboard with battery docking station. The problem with the docking station, is only the work of power and audio connector. More is running, no ports (HDMI, USB, LAN). The problem with the keyboard, the touchpad and keyboard do not work. Once the battery is connected. Windows 8/1 Pro 64 bit is installed, the latest drivers and BIOS (A15). Without docking station and keyboard shelf works well. USB and HDMI ports on the tablet work well.

  What can I do?

  Thank you!

  Hello

  same problem here. Both my dock and travel keyboard no longer works. Only my dock workload but not USB, etc.

  I've updated my 7130 windows 10 with the latest bios drivers but no luck.

  Time for dell start with patches!

  Benny

• Firefox Sync does not work for Tablet Android Nexus 10.

  Firefox Sync works for 2 PCs, but does not work for an Android tablet. It is said, that the tablet was connected successfully, I checked the bookmarks and history options to be synchronized and or bookmarks, or history of the browser has not been updated on my tablet.
  No errors. Anything not came to the Android device.
  I tried with 2 different synchronization profiles - same story for the second profile.

  Please note that we are currently living with Sync server issues. Our technicians are working around the clock to the question of setting and ensure that it works at its best. The current option is to try to keep synchronized and if you are able to synchronize properly, we recommend to not not to sync more than once every 2 hours.

  Thank you and sorry for the inconvenience.

• Jet 7 Tablet 5709: 10 Windows reinstall does not work properly; touch feature does not work after reinstalling HP sw

  I followed the steps of the http://h30434.www3.hp.com/t5/Windows/Windows-10-fresh-installation-on-the-HP-Stream-tablet/m-p/52038... to restore my tablet. The bottom line is - I use a keyboard and mouse, but tactile does not work, even after the installation of the various HP software specially required for the flow of data 7. When I start the Tablet, I can get the lock screen, but it cannot exceed.

  I tried to install Windows 8.1 USB, but I can't go beyond the screen who wants the product key. Should what product key I use? If I go back and reinstall Windows 8.1 the touch feature work?

  What can I do to get a running Stream 7 tablets?

  Hello Aberger,

  I guess that you have improved your 7 to 10 of Windows Workflow, but now you want to reinstall Windows 8.1, correct?

  If you went to go back beyond the 30 day trial period, you can use the image USB, you must have created 8.1 Windows before installing Windows 10.

  IF you have not done this media, you will need to clean install Windows 8.1 with Bing.

  You can not install ordinary Windows 8.1 copy unless you buy a new key.

  Machines that accompanies Windows 8.1 no longer a sticker with a key to the subject because the key is embedded in the bios. Installing Windows 8.1 with Bing will activate when he sees the key in the bios.

  During the installation process, you may need to click Skip to ignore entered the key until Windows has installed fully. If so, this will cause windows to enter a Limited State of Activation. When you connect to the internet to update, it will fully activate.

  You must contact the HP Support directly to the new copy of the installation media if you do not already have.

  Here is the link to contact...

  Contact HP worldwide | HP® official site

  Let me know if you have any other questions.

• I have an ASUS EEE tablet. I was told firefox does not work with it. Is this true?

  I have an ASUS EEE tablet. I was told firefox does not work with it. Is this true?

  Firefox will work on the Asus Eee Pad Transformer tablet, although there are some known issues with the keyboard dock. For more details, see https://wiki.mozilla.org/Mobile/Platforms/Android#Known_Issues

• Satellite R10-101: touch screen does not work in tablet mode

  Hello

  I just bought a Satellite R10-101 laptop / tablet.

  The machine didn't come with a stylus, so I'm not sure if the touchscreen works or not.

  When the machine is in tablet mode touch screen is unresponsive to a contact with a finger. I tried a pointing device of a Windows CE handheld that has a touch screen, but it does not work on the touch screen of the R10.

  The touchscreen should be enabled or that I have to get a Toshiba stylus?

  The computer is running Windows XP Tablet Edition. Will I get the same functionally if I update to Windows 7. Material of the R10 is compatible with Win 7?

  Thank you for any help or advice.

  Joe

  Post edited by: Joe Blow

  Hello

  The display panel works as a touch sensitive digitizer screen.
  You need the stylus to use the touch screen in tablet mode.

  I think you can order the stylus lack of authorized partner Toshiba in your country or google for part numbers: P000407550 or P000445420