Display of the tabs on the front page with no linked page

Similar Questions

• Can we get rid of the eye on the front page? Me slide out!

  Filled with the sign the petition for INTERNET security. Now I can't get rid of the eye on the front page. I want to get rid of because I've already signed. The eye slips out, can it be done away now?

  I am in the United Kingdom and do not see it, but I doubt that Mozilla put there. However I see you are using a theme, then in the case which is originally he Try Firefox Safe Mode see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "Start mode safe" - does NOT REFRESH!

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  If it goes further, remove the theme and if you need to reset the homepage, please see my initial response.

  By the way, you should be able to see the homepage at any time by typing on: House in the address bar and pressing ENTER.

• Jump the numbering on the front pages

  I'm working on a several page brochure in InDesign CC2014 and I want to start numbering pages on what is basically page 6, jumping the lid of the numbering and the next four pages after, but I see no way to do it. I played with the numbering and section options, but nothing seems to work. Any help would be greatly appreciated.

  All the pages in your document must have a number assigned to them, but you don't need to show this number on the page.

  As says Willi, create a new section where you want your page numbering to start at 1 (this is called the 'logic' page number or section numbering). ID complain when you exit the dialog box that you already have a page with this number, so it's also a good idea to change the style of numbering for the front pages. Preliminary pages is traditionally numbered with lower case Roman numerals (i, ii, iii...), and I usually use A, B, c... cover and inside cover, with no marker page number on which pages should be numbered in the final doc.

• The time stamp in a beautiful display on the front

  Hello

  Everything is the title in

  I want to see the time (hour, minute) and the date (month, day, badara) on the front

  with a beautiful view in the front.

  Exp: A nice watch while seeing the needles turn

  Comment by then?

  Don't tell me it's impossible,

  Translation:

• Browser tab is displayed in the front of the form

  Hello
  
  When I try to open my form on the configurator the form page is open, but with it even the GHG browser tab opens and gets poster on top and the form appears below. How to change overturn. This has happened after upgrade to R12.
  
  
  Concerning
  Kishan.M.G

  I've seen it work on 11i, but not on R12. Make sure that you have the latest patches of forms and the Sun Java Plugin update patches for your release.

  Applet of Configurator opens behind the forms with Sun JRE (Doc ID 750576.1)

  Diagnose the problems of development of mouse shapes using JRE (Doc ID 760250.1)

• In Control Panel is displayed only the themes page

  In XP - SP3, click display in Control Panel shows only themes page.  Tabs marked office, Sceensaver, appearance and settings all disappeared.  What I did to crush them and how to get back the missing tabs?  I tried to replace desk.cpl in the system32 folder, but still get the same result.  I am the only user on the machine and have administrator privileges.

  Hello
   
   
  1. have you made changes on the computer recently?

  Method 1.
  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  Note: If you are unable to create a user profile on this user account try to create this in safe mode.

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

• icons displayed in the web pages

  navigation icons are displayed under vacuum with a 4-bit code. I have a screen Save example.

  What is a narrow box with two rows of two characters? Firefox displays this code when it cannot find the character in any available font. The most common reason to see it is that some sites are now replaces the image icons with characters that Firefox has to download. If you have set Firefox on:

  • use only the fonts your favorites instead of the page fonts
  • not to download fonts (or in total: config or by using the NoScript extension)

  Then, you need to change it in order to see the icons.

  First, check your settings here:

  "3-bar" menu button (or tools) > Options > content

  Click the Advanced button and make sure there are check box 'allow pages to choose their own fonts.

  If you change this, try to reload the page. Firefox support missing icons?

  If this isn't the issue, please come back and move us to the next things.

• The LEXMARK 2300 series printer displays only the first page in Vista

  Printer only prints the first page but another page #s are displayed; However once you have printed the first page, other pages do not print and those page # disappear off the screen

  Printer only prints the first page of the document, even when the other page #s displayed. is my badly installed driver because I did everything he asked to uninstall then reinstall

  Hi lcwater,

  Please do not forget to download the latest drivers/software from the Lexmark Web site:

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

  In addition, please see the following article on the Lexmark Web site:

  http://support.Lexmark.com/index?page=content&ID=SO4442&ACTP=search&viewlocale=en_US&UserLocale=en_US&segment=support&ProductCode=&searchID=1275498114885

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• BlackBerry Torch 9800 smartphones does not display correctly the web pages properly and is healed by a reboot

  The normal display of the torch screen is shortened, the top of the page you are looking at is then repeated at the bottom section. Allow about 3/4 inch

  7, I made a new upward with the desktop software. Then, I removed all the info on the phone, then upgraded to reinstall the operating system. After that, I did a restore my files and programs. After the start, I did a battery pull. I think I can consider the issue RESOLVED because it plays as it should since Sunday

• Profile value didn't display in the Standard Page

  Hi all

  I have successfully created the profile and the profile list appear in my "Search" tab and check the news in a tab (see Image below)

  

  But, when I click on search Standard or Standard to check my profile that are in the list, the application form, ARA, and TRACS400 does not display in the drop-down list. (see image below)

  

  For your information, I use the standard field that is xIdcProfile and I put the value profile tab views without creating the new domain. (See image below).

  

  On the right, the list should be automatically right view? Can someone help me on this?

  Thank you.

  And clear the cache of your browser...

  To add to the suggestion of Jonathan, you must enable the follow-up schematic edition when you post... see if you get any errors.  Errors in another view may keep your target publication view.

• The links that I send to my album opens the front page of Revel on other computers.

  If I copy the link form my browser as indicated on the FAQ page (FAQ: How do I share files at Revel?) It opens only the cover page of Revel on other computers. Also in the Mac app, the sharing option is not active. What's wrong?

  And another question: if I shared an album in this way, by sharing the link, is it possible to cancel the share?

  Hi GG,.

  It is possible that you share the incorrect URL. It would not surprise me that the FAQ is terribly confused. I will reiterate how to share an album with friends.

  To share an album of adoberevel.com:

  1. go to your library and create an album with some pictures that you want.

  2. While in the selection of the album. A dialog box displays - Select this option to start sharing

  3. after that another dialog box appears with a short URL. Copy this URL and send e-mail or use one of the icons which appear on this screen. You can also select this screen, if you want people to be able to upload images.

  You can choose to stop sharing the album at any time by returning to this same dialog box and select this option to stop sharing.

  If you want to share an album through desktop Revel:

  1. go to your library and select the Album icon (or go to file > New Album empty)

  2. enter a name for the album you. Select the adoberevel.com CheckBox part. You can also decide if you want to allow the downloads here.

  3. a short URL will be generated. You can copy that now, if you want or go back. Select the button create.

  4 Add photos to the album.

  5. click on the album in the list and a little 'I' appears next to the name of the album. Click it and the URL is displayed. This is the URL that you share.

  Again, you can choose to stop sharing the album at any time by returning to this same dialog box and select this option to stop sharing.

  Glenyse

• Image on the back and the front pages in the brochure printing

  Hello.

  I have a riddle.

  I want to have an image that extends over the back and the first page of a document, which will be finally printed booklet style.

  I am struggling to get this just so if I put in place with gaps, i.e., I'll have to place the image twice and try and guess the marriage of the central point.

  Or I can allow pages Shuffle which allows then to me the last page in the front of the first page to allow me to place the images on the area, but then it live to the printing of the brochure.

  Any advice?

  Or you caan place once and place them correctly on the page or the police back, then copy and paste them in place on the other and they will be perfectly matched.

• SWF files are not displayed when the Web page is published to the web

  I was given 5 swf files to add to a Web page. I insert > media > swf and added each swf along the left side of the page. I can read the files when I saw in firefox, ie, chrome, etc. I copied then all the videos, Scripts files and html on the remote server file. When I go to the update page, the page is displayed correctly except for 5 swf files. The page is located here: http://coeh.berkeley.edu/pehsu/VideosC.html.  I use Adobe Dreamweaver CS6. Any help will be appreciated.

  It seems to give the same strange message "the server cannot find the file specified" on any .swf. If you change a the .swf .jpg file, you get the standard message on the server 404 File not found.

  Try to place one of your .swf files in the same folder as your index.html page. Then navigate to it directly http://coeh.berkeley.edu/pehsu/oscar4.swf

  for example and see what happens.

  I wonder if it is not something your server administrator might help you here.

• [JS CS5] Bad placement of the file on the front page

  I'm wondring the way around, but does not seem to resolve the correct file placement is a recto page.

  I have a document with several pages where I need to put some files (eps, idms, etc.). So that X and there contact information are data but incase of front position of the placed files page are not correct.

  origin of the page rule should work for the place or add any similer point page elsewhere but here to place any file it gives me bad investment.

   var theDoc = app.activeDocument, curPage, leftMargin, topMargin, pageBounds, pageWidth, theYpos, theXpos, theHeight, theWidth, snippetFile, theBag;
   theDoc.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin;
   curPage = theDoc.pages[1];
   leftMargin = curPage.marginPreferences.left;  
   topMargin = curPage.marginPreferences.top;  
   pageBounds = curPage.bounds; 
   pageWidth = pageBounds[3]-pageBounds[1];                   
   theYpos = topMargin+  240;
   theXpos = leftMargin + 0 ;
   theHeight = theYpos + 60 ;
   theWidth = theXpos+100;
   snippetFile = File("/C/Image/Lorem.idms")
   theBag= curPage.place(snippetFile, {geometricBounds:[theYpos,  theXpos, theHeight,  theWidth]});
              
  

  I don't know if this a bug or what am I missing here.

  Thank you

  Mac

  Hey Mac,

  I suggest that you download the png file format or just the InDesign Document to create the snapshot and the live page on the post.

  OK Mac you try this its working for me good.

  Please check and come back.

  var theDoc is app.activeDocument curPage, leftMargin, topMargin, pageBounds, pageWidth, theYpos, PosX, theHeight, theWidth, snippetFile, theBag.;
  theDoc.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin;
  curPage = theDoc.pages [2];
  leftMargin = curPage.marginPreferences.left;
  topMargin = curPage.marginPreferences.top;
  pageBounds = curPage.bounds;
  pageWidth = pageBounds [3] - pageBounds [1];
  theYpos = topMargin + 240;
  PosX is leftMargin + 0.;
  theHeight = theYpos + 60;
  theWidth = PosX + 100;
  snippetFile = File("~/Desktop/1.inds");

  var myActivePage = app.layoutWindows [0] .activePage = curPage;
  if(myActivePage.Side == PageSideOptions.rightHand) {}
  Alert ("front");
  theBag = curPage.place (snippetFile, [leftMargin, topMargin]);
  }
  else {}
  Alert ("back");
  theBag = curPage.place (snippetFile, [leftMargin, topMargin]);
  }

  THX

  csm_phil

• Inserting record in the database and then display on the next Page

  Hello!

  For a while since I posted here, but I've been pulling my hair out on this one.  Here's what I want to do.  I have a page that I want to be able to enter text in two form fields, then click on "Insert disc", and then on the next page, I just submit display.  For example, on the "insert.php" page I want to enter the field ID and Joe 43569 in the first name field.  Then after I click on submit (or insert record) the next page will have a text that says: "congratulations Joe, your ID is 43569.»  Have a great day! "Or something to that effect.

  I have the database mySQL, set up and insert records into it since this page works correctly.  Here is the code of my insert.php page which I think is the issue.   I'm just confused as to which should be added to the page detail.php to have this sentence appears correctly.  Is there something that should be added to the code on the page insert.php?  Something after the detail.php on that first line?

  Thank you, thank you, thank you in advance.

  Brent

  $insertGoTo = 'detail.php ';
  If (isset {}
  $insertGoTo. = (strpos ($insertGoTo, '?'))? « & » : « ? » ;
  $insertGoTo. = $_SERVER ['QUERY_STRING'];
  }
  header (sprintf ("location: %s", $insertGoTo));
  }
  ? > <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  " < html xmlns =" http://www.w3.org/1999/xhtml ">
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
  < title > Untitled Document < /title >
  < / head >
  
  < body >
  < do action = "<?" PHP echo $editFormAction;? ">" method = "post" name = "form1" id = "form1" >
  < table align = "center" >
  < tr valign = 'of basic">
  < td nowrap = "nowrap" align = "right" > ID: < table >
  < td > < input type = "text" name = "ID" value = "" size = "32" / > < table > "
  < /tr >
  < tr valign = 'of basic">
  < td nowrap = "nowrap" align = "right" > first name: < table >
  < td > < input type = "text" name = "lastName" value = "" size = "32" / > < table > "
  < /tr >
  < tr valign = 'of basic">
  < td nowrap = "nowrap" align = "right" > < table >
  < td > < input type = "submit" value = "Insert file" / > < table >
  < /tr >
  < /table >
  < input type = "hidden" name = "MM_insert" value = "form1" / >
  
  < / make >

  When you submit the form, the form fields values are passed to the query insert as variables of $_POST, but as soon as you redirect the user to another page, these variables are destroyed.

  There are two ways to preserve the values: use sessions and session variables, or add values to the end of the redirect URL query string. Using the variables of session is probably easier since you can do it at the top of the page that inserts data into the database without affecting the code of Dreamweaver Server behavior.

  Put this at the top of the current page:

  In details.php, add top of the page. You can then use $_SESSION ['ID'] and $_SESSION ['name'] to display the values.

• Flash .swf content that is not displayed on the Web page

  A flash melted fade on .swf content on a Web page is not displayed online.
  can you help me please?
  Note: works fine offline on my PC and all the targeted links.
  Thank you very much. http://www.ethiosurf.com/aboutethiopia.html

  The code in the HTML to the swf seems to be missing a whole bunch of settings, but I can't point the finger to say that it won't work.

  The best advice I can offer to get started is to use the code in the html page that Flash creates when you publish (be sure to have the html option selected in the settings of publication). You will see two sections of < script=""> and < noscript=""> which places the swf file in the html page and up in the head section will be one or two lines of code related to a javascript file: AC_RunActiveContent.js, you will need to include as well. Also, don't forget to copy the AC_RunActiveContent.js file on the server (Flash adds this file in swf file when you publish).

  See if it works for you.