Profile value didn't display in the Standard Page

Similar Questions

• After its replacement by the new AM a LOV in the standard page stopped work (R12)

  I spread an AM in one of the standard Oracle applications Page. After its replacement by the new AM, a LOV in the standard page no longer works.
  Do anyone have a solution for this?
  
  Thank you
  Lou

  1. you can move this code to the controller.

  2. While doing the extension must also worry about the maintainability of the code.

  3. If you do not add this to the CO, create a new AM, specify this AM to a region on your page, now it will become nested AM.

  4. you can code for call PLSQL in this new AM.

  5. you can access this CO AM and call this method.

  I recommend to call the PLSQL Co.

  -Prince
  http://princekapoor82.blogspot.com

• user name displays wrong in capital letters at the top of the support page. I see it correct in post however; Passwords not displayed in the Security page?

  There is a similar issue where a user asks why his user name is indicated in all cases of small. My problem is the reverse of this and have a problem me of security in the way that it appears. Do you understand what I'm saying / implying? Second half of my question must be indicated separately... but I can't show screen captures and copy / paste it to display all my concerns separately. It took me two weeks just to get the support of Mozilla to take one of my questions, which includes a separate question on the connection to this page (to check under my username). I'm that raise because I can't it spend many hours just trying to get answers to things that should never occur on Firefox. It's as if it's the same amount of security issues, such as Internet Explorer a. cannot find a field course. Your app problems works, I see well at first glance. But good blood, so many hours spent on brand laptop nine just to any browser without these security vulnerabilities expose me as I am naked; just try out these issues for you. I'm sorry to ramble on time, but it seems so wrong to have so many problems on a PC new, new version of FF 41! There are issues with copy / paste, to better explain the problems of screen capture. I need to be connected to a remote control utility PC just to show all questions. Is this possible with your troubleshooting app? Please don't leave me because I'm sniveling. I must really be reassured that it will happen as I am exposed just by sending this. Can you feel me? I need to view the issue with error message of synchronization. Is it possible to address all the issues at once with your troubleshooting app? What I really need to open each issue separately because they are many. Sorry, but I can't reinstall FF 41 is no cure for these issues. Is no answer. Thanks in advance for listening. I believe in FF/Mozilla concepts.

  I use a rule in userContent.css to change this in small capitals.
  Which looks almost the same and allows to preserve the species, that is to ask a question shows with a capital 'A' instead of as 'ASK A QUESTION '.

  You can use the Inspector to find the switch to other containers where you want to change the appearance.

  @-moz-document domain(support.mozilla.org) {
   #aux-nav,.question-meta {font-variant:small-caps}
  }

  Add the code to the userContent.css file.

  • http://KB.mozillazine.org/userContent.CSS

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

• SWF files are not displayed when the Web page is published to the web

  I was given 5 swf files to add to a Web page. I insert > media > swf and added each swf along the left side of the page. I can read the files when I saw in firefox, ie, chrome, etc. I copied then all the videos, Scripts files and html on the remote server file. When I go to the update page, the page is displayed correctly except for 5 swf files. The page is located here: http://coeh.berkeley.edu/pehsu/VideosC.html.  I use Adobe Dreamweaver CS6. Any help will be appreciated.

  It seems to give the same strange message "the server cannot find the file specified" on any .swf. If you change a the .swf .jpg file, you get the standard message on the server 404 File not found.

  Try to place one of your .swf files in the same folder as your index.html page. Then navigate to it directly http://coeh.berkeley.edu/pehsu/oscar4.swf

  for example and see what happens.

  I wonder if it is not something your server administrator might help you here.

• Inserting record in the database and then display on the next Page

  Hello!

  For a while since I posted here, but I've been pulling my hair out on this one.  Here's what I want to do.  I have a page that I want to be able to enter text in two form fields, then click on "Insert disc", and then on the next page, I just submit display.  For example, on the "insert.php" page I want to enter the field ID and Joe 43569 in the first name field.  Then after I click on submit (or insert record) the next page will have a text that says: "congratulations Joe, your ID is 43569.»  Have a great day! "Or something to that effect.

  I have the database mySQL, set up and insert records into it since this page works correctly.  Here is the code of my insert.php page which I think is the issue.   I'm just confused as to which should be added to the page detail.php to have this sentence appears correctly.  Is there something that should be added to the code on the page insert.php?  Something after the detail.php on that first line?

  Thank you, thank you, thank you in advance.

  Brent

  $insertGoTo = 'detail.php ';
  If (isset {}
  $insertGoTo. = (strpos ($insertGoTo, '?'))? « & » : « ? » ;
  $insertGoTo. = $_SERVER ['QUERY_STRING'];
  }
  header (sprintf ("location: %s", $insertGoTo));
  }
  ? > <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  " < html xmlns =" http://www.w3.org/1999/xhtml ">
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"
  < title > Untitled Document < /title >
  < / head >
  
  < body >
  < do action = "<?" PHP echo $editFormAction;? ">" method = "post" name = "form1" id = "form1" >
  < table align = "center" >
  < tr valign = 'of basic">
  < td nowrap = "nowrap" align = "right" > ID: < table >
  < td > < input type = "text" name = "ID" value = "" size = "32" / > < table > "
  < /tr >
  < tr valign = 'of basic">
  < td nowrap = "nowrap" align = "right" > first name: < table >
  < td > < input type = "text" name = "lastName" value = "" size = "32" / > < table > "
  < /tr >
  < tr valign = 'of basic">
  < td nowrap = "nowrap" align = "right" > < table >
  < td > < input type = "submit" value = "Insert file" / > < table >
  < /tr >
  < /table >
  < input type = "hidden" name = "MM_insert" value = "form1" / >
  
  < / make >

  When you submit the form, the form fields values are passed to the query insert as variables of $_POST, but as soon as you redirect the user to another page, these variables are destroyed.

  There are two ways to preserve the values: use sessions and session variables, or add values to the end of the redirect URL query string. Using the variables of session is probably easier since you can do it at the top of the page that inserts data into the database without affecting the code of Dreamweaver Server behavior.

  Put this at the top of the current page:

  In details.php, add top of the page. You can then use $_SESSION ['ID'] and $_SESSION ['name'] to display the values.

• The LEXMARK 2300 series printer displays only the first page in Vista

  Printer only prints the first page but another page #s are displayed; However once you have printed the first page, other pages do not print and those page # disappear off the screen

  Printer only prints the first page of the document, even when the other page #s displayed. is my badly installed driver because I did everything he asked to uninstall then reinstall

  Hi lcwater,

  Please do not forget to download the latest drivers/software from the Lexmark Web site:

  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

  In addition, please see the following article on the Lexmark Web site:

  http://support.Lexmark.com/index?page=content&ID=SO4442&ACTP=search&viewlocale=en_US&UserLocale=en_US&segment=support&ProductCode=&searchID=1275498114885

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• BlackBerry Torch 9800 smartphones does not display correctly the web pages properly and is healed by a reboot

  The normal display of the torch screen is shortened, the top of the page you are looking at is then repeated at the bottom section. Allow about 3/4 inch

  7, I made a new upward with the desktop software. Then, I removed all the info on the phone, then upgraded to reinstall the operating system. After that, I did a restore my files and programs. After the start, I did a battery pull. I think I can consider the issue RESOLVED because it plays as it should since Sunday

• Copy the default value from another field in the same page

  Hello

  I need to pass a value from one page to another page and I want to use this key as DEFAULT VALUE for a field.

  If I create a form tabular all it's ok, but if I create a normal page. I am not able to do that.

  1. 1. I call the page and I pass the value. I also have a FIELD of VIEW and I can see the correct value.
  2. 2. I create a field with attributes of this:
     1. a. source > Source = database column type
     2. b. sources > Source value or expression = FK_ID_DA (the column name)
     3. c. default > default = P27_PK_ID_DA (the field that contains the value)
  3. 3. on the screen, I see P27_PK_ID_DA and not the value

  Where is the error?

  Thank you very much

  TexasApexDeveloper wrote:

  You missed one: before the variable, without it, the default value is the string...

  Not sure that you can READ the other pages... Such that if you are on Page 27 and have a field that you want to use on page 30, page 27 is presented and its items in session state, you can 'see' on page 30.

  So, if you set the default value: P27_PK_ID_DA, then you should get by default, you are looking for...

  Only if the default value Type is set on the PL/SQL Expression. If the literal value "P27_PK_ID_DA" is seen then the Type of default value should currently be set static text with Substitutions of State of Session, in which case the value of session state must be referenced using the syntax of substitution string:

  &P27_PK_ID_DA.

• Pass values between different areas on the same page.

  Hi guys!

  I'm developing a simple application where we have the list of students. I'm displaying information on a separate page for each student. Do you have any idea how and if I can pass parameters between regions, on the same page? I have a view showing, student card name information etc, and I want to create another view on the same page, which will be the student and will return a list of its subscribed courses.

  Part of my database is something like this:

  -------------

  Students

  ------------

  ID (PK)

  ------------

  -----------------------

  Student_course

  -----------------------

  ID (PK)

  Student_id (FK)

  Course_id (FK)

  ----------------------

  ----------------

  Course

  ----------------

  ID (PK)

  You have no idea how this can be done? I found information how to pass parameters between pages, but not on the same page.

  Thanks in advance!

  P.S. I am using the Application Express (declarative programming via a web browser), the use of the Application Builder.

  I discovered that I really had to. I just had to replace the "1" in my sql query with: P9_STUDENT_ID

  Thanks for your help anyway!

• The field values of transmitted TEXT to the next page for purposes of report.

  Hello
  
  I'm developing an application in which I have several text fields that (are mandate to generate the report) desire to move to the next page, to generate a report with her, I'm not able to find how to store these values entered by the user and there on next page.
  Please give your opnion and opinion on this.
  
  
  Neel
  
  PS I tried with the query, but this hidden obeject is still not quite able to do it.

  create a field on the new page
  and when you use a button set the parameters and assignaments on the target field and a field value

• Flash .swf content that is not displayed on the Web page

  A flash melted fade on .swf content on a Web page is not displayed online.
  can you help me please?
  Note: works fine offline on my PC and all the targeted links.
  Thank you very much. http://www.ethiosurf.com/aboutethiopia.html

  The code in the HTML to the swf seems to be missing a whole bunch of settings, but I can't point the finger to say that it won't work.

  The best advice I can offer to get started is to use the code in the html page that Flash creates when you publish (be sure to have the html option selected in the settings of publication). You will see two sections of < script=""> and < noscript=""> which places the swf file in the html page and up in the head section will be one or two lines of code related to a javascript file: AC_RunActiveContent.js, you will need to include as well. Also, don't forget to copy the AC_RunActiveContent.js file on the server (Flash adds this file in swf file when you publish).

  See if it works for you.

• Application Wizard page creation diff than the standard page Wizard

  When I create an application, he automatically create a page with limited options. For example, he asks me not for the primary key, or set the source of the primary key column, or columns I want to display, or what buttons I want to use.
  
  But when I create a page on an existing application, it gives me all of the above options in the wizard. Why? And what should I do with the first created page when I created the application (which is not all of the settings that I need)?

  Hi Scott,.

  What I tend to do normally, is to just create a blank page called "Homepage" and create a home page. But it's personal. If you create pages after that, you can simply use the full wizard functionality. Also, you can set the default page 2 for the application if you wish.
  If you go to page 101-> (Page processing) processes-> Login

  Change the number 1 in the last parameter in first page by default (as 2)

  Greetings,
  Rutger
  http://rutgerderuiter.blogspot.com/
  ===============================================================================
  You can reward this answer by marking as being useful or correct ;-)

• I do not have a firefox button and didn't get to the general page

  I have firefox symbol in the upper left corner, but I don't have a button that takes me to the general page. Do I need a button, and if not how to access the General page? If I need a button how to do it

  Firefox on Windows has two configurations of different menu:

  • Bar menus classic full-width
  • Compact menu accessed with a Firefox button orange

  I'm looking for Options. In the classic menu bar, they are under Tools.

  To activate the menu configurations, you can use one of these:

  • View > toolbars > Menu bar
  • Right click on a zone empty of the tab bar > Menu bar

• display of the Web page requires the horizontal adjustment

  Why are most of the Web pages too large and require horizontal adjustment? most of us do not have 36 "wide monitors. IE8 micro there a way to reduce these idioticly wide pages?

  Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows displays only the first page of a multipage document - solutions?

  I recently installed an HP printer on my laptop with the help of a support HP online technician, but only the first page printed - the other eight were empty.

  Also, one-third of the right side of the document (electronic mail) was chopped up, while the leftmost column prints (Windows Live/Hotmail/Hotmail address) in the full preview and printing is not available since I upgraded to IE8 on my laptop HP under Vista Home Premium.

  How do I Center this document so that it will print correctly, and can I add the "Print preview" option in my Google toolbar, or install an another toolbar that includes?

  Thank you!

  http://welcome.HP.com/country/us/en/support_task.html

  Go to the above link > 'See support and troubleshooting information' > key in your number of printer > there is the use of manuals there.

  For more information, contact HP:

  http://welcome.HP.com/country/us/en/contact_us.html

  See you soon.

  Mick Murphy - Microsoft partner