Display of value and percentage

Similar Questions

• Displaying an Enum value and the name of the element when the values are not sequential

  Hello

  I use Enum and controls indictators successfully with shared and modbus variables.

  For example:

  Name of the element Value

  Off:                0

  Start 1

  On                2

  Œuvres enum Setup, I don't need to look for a cheat sheet to convert the name of the element in its value, I see the name of the item in my order/indicator.

  My new variables, I'm currently managing look like this:

  Name of the element Value

  Code 0 x 201

  Beginning Code 0 x 202

  Code 0 x 001

  Any ideas how I can display the value and the name of the element on a façade. (for a control and indicator)

  For enumerations, it seems that the item values must go 0,1,2,3,4,5

  I found the solution:

  http://digital.NI.com/public.nsf/allkb/79BA4505AE8C755E86256FB2000140B0

  use a ring of text and deselect the sequential box

• Cannot display label and percentage together for camembert

  Hello

  When you use the chart to sectors dvtm MAF element, we have the ability to 'Slice Label' to pieDataItem.

  If we do not give the Label "Slice" then % values are displayed as shown in the attachment Slice_label_NOT_given.png

  If we give the Label 'Slice' then the given label is coming but not the values of % as indicated in the attachment Slice_label_given.png

  We do not want to display the caption separately and we want to display the value of the label and set %

  with the value % under the label of each slice, as indicated in the attachment Expected_behavior.png

  Please suggest a way to implement this without manually calculating the values of %

  Thank you

  Suresh.

  Hello

  Thanks for the details describing your problem. Please check the details below. Therefore, use LD_TEXT_PERCENT. Please check the details below. Please do not hesitate to score useful or correct if you find it for other purposes.

  Pie charts to calculate and display the default percentage values. An application has the ability to have the pie chart to display percentage values and / or numbers used to calculate percentages. To configure what is displayed in the slice of the pie label, textType attribute can be defined and accepts the following values (LD_VALUE, LD_PERCENT, LD_TEXT, LD_TEXT_PERCENT).

  Thank you
  Amey

• using script to get the values of percentage and not able to sum up to 100%

  Hi all

  I am trying to use a parseFloat() function to convert the string value as a percentage, and then try to add all the values of %.

  but for a few scenrios even if the amount is 100% of the service I get the PctValue be <>100.00%

  the calculation of the function is as follows: -.

  code-

  {iterating_through_all_the_fields}

  PctValue += parseFloat (this.getField("Percentage1").valueAsString);

  }

  sample-

  11.12

  11.11

  11.11

  11.11

  11.11

  11.11

  11.11

  11.11

  11.11

  amount is 100

  but through code mentioned above I return 99.99

  Any help is appreciated in this regard.

  It is a result using the floating point IEEE standard and conversion from decimal to binary values values. We need to round up all the calculations of money or mils will accumulate and cause errors. For percentages, it is better to round up receipts and total final eliminate the accumulation of amounts below the figure the least significant.

  It is possible to use the util.printf of rounding.

  The following script will show what is happening:

  function Round (nValue, nDec) {}
  If (typeof nDec == "undefined") nDec = 0;
  Return number (util.printf ('%, 1 0. nDec + "f", Number (nValue)));
  }

  var nValues = new Array (11.12 11.11 11.11, 11.11, 11.11, 11.11, 11.11, 11.11, 11.11);
  nSum var = 0;
  for (var i = 0; i)< nvalues.length;="" i++="" )="">
  nSum = nSum + Round (nValues [i], 2);
  Console.println (i + "" + nValues [i] + "" + nSum);
  }
  Console.println (nSum);
  nSum = Round (nSum, 2);
  Console.println (nSum);

  Progression of the sum at each stage.
  0 11,12 11.12
  1 11.11 22.229999999999997
  2 11.11 33.339999999999996
  3 11.11 44.449999999999996
  4 11.11 55.559999999999995
  5 11.11 66.66999999999999
  6 11.11 77.77999999999999
  7 11.11 88.88999999999999
  8 11.11 99.99999999999999
  99.99999999999999
  100

  true

  It's a good idea to use decimal values a percentage and leave the determination of the field format display and the borough. But for applications of the sum, the user can round up the value of the actual field and not only display.

• Read integer values to worksheet and display the values in a table

  Hi all

  I have integer values to read from a worksheet and display them in a table. I uses 'Reading of the spreadsheet file' mode 'integer '. I want to display these values in a table. The problem is the table takes only 2d-array of string as input but not an integer.

  It works fine if I change 'Worksheet file playback' mode to 'integer' to 'chain', but I want to read integers and must use integer values for calculations more. Please give suggestions on the display of integers to a table.

  Thank you.

  Do not take not piece-by-piece just convert as a whole. See the attached example

  

  Good luck

• You enter a value and tab out of af:inputListOfValues displays an incorrect value

  Hello. I have a problem with the autosubmit and tab off af:inputListOfValues in my code.

  Problem: When I type in a valid value and tab out of the field, it ignores the value, I entered and displays everything the first list in the result of the query instead regardless of the value that I typed.

  My code snippet. What it does is simply a search for employee LoV unattached to an attribute of the entity, and depending on selection, it displays the name of the employee within the page. (it also retrieves a table view what employee number came into office)

  < af:inputListOfValues id = "empNoId".

  popupTitle = "search and select: #{bindings." EmpNo.hints.label}.

  value = "#{bindings." EmpNo.inputValue}.

  label = "#{bindings." EmpNo.hints.label}.

  model = ' #{bindings. " EmpNo.listOfValuesModel}.

  required = "#{bindings." EmpNo.hints.mandatory}.

  columns = "#{bindings." EmpNo.hints.displayWidth}.

  shortDesc = "#{bindings." EmpNo.hints.tooltip}.

  Binding = "#{workLocationBean.txtEmpNo} '"

  partialTriggers = "id1".

  valueChangeListener = "{bean.onEmpNoChange}" "

  autoSubmit = "true" >

  < f: validator binding = "#{bindings." EmpNo.validator} "/ >"

  < / af:inputListOfValues >

  Other things to note:

  When I enter a valid employee number and click anywhere on the page (not TAB), it behaves properly.

  I tried to figure this out for days. Even my valueChangeListener Gets an incorrect value (when I do System.out) when I tab out, so I do not know where to catch them and replace it with the correct value.

  Thank you.

  This happens usually when the primary key is not defined in the view object used by LOV.

  Dario

• Property not found on flash.display.Loader charger and there is no default value

  Hi, I want to drag a single image of set of images loaded via xml, but it is showing an error.

  ReferenceError: Error #1069: property not found on flash.display.Loader charger and there is no default value.

  "hand / mouseDownHandler ()" thanks in advance...

  XML

  /////////////////////////////////////

  <? XML version = "1.0" encoding = "utf-8" standalone = "yes"? >

  < GALLERY >

  < IMAGE THUMB = "photo_tb/pic1.jpg" / > "

  < IMAGE THUMB = "photo_tb/pic2.jpg" / > "

  < IMAGE THUMB = "photo_tb/pic3.jpg" / > "

  < IMAGE THUMB = "photo_tb/pic4.jpg" / > "

  < / GALLERY >

  /////////////////////////////////////////////

  package

  {

  import flash.display. *;

  import flash.events. *;

  flash.net import. *;

  import flash.display.Sprite;

  import flash.display.Loader;

  import flash.events.MouseEvent;

  main/public class extends MovieClip

  {

  private var levelXML:XML;

  private var myLoader:URLLoader;

  private var my_images:XMLList;

  private var my_total:Number;

  private var my_thumb_width:Number;

  private var container_mc:MovieClip;

  private var my_mc:MovieClip;

  public void main()

  {

  levelXML = new XML();

  var XML_URL:String = "data / data.xml."

  var myXMLURL:URLRequest = new URLRequest (XML_URL);

  myLoader = new URLLoader (myXMLURL);

  myLoader.addEventListener (Event.COMPLETE, lanceApp);

  }

  private void startApp(e:Event):void

  {

  var myXML:XML = new XML (e.target.data);

  my_images = myXML.IMAGE;

  my_total = my_images.length ();

  createContainer();

  callThumbs()

  for each {(var niveau: XML dans levelXML.level)}

  trace (Level.leveltitle);

  trace (Level.identifyme);

  //}

  }

  private function createContainer (): void

  {

  container_mc = new MovieClip();

  container_mc.x = 50;

  container_mc.y = 50;

  my_mc.x = 100

  my_mc.y = 100

  addChild (container_mc);

  }

  private function callThumbs (): void

  {

  trace (my_total)

  for (var i: Number = 0; i < my_total; i ++)

  {

  'loader_' + i

  my_thumb_width = 100

  var thumb_url = my_images[i].@THUMB;

  var thumb_loader = new Loader();

  thumb_loader. Load (new URLRequest (thumb_url));

  thumb_loader.contentLoaderInfo.addEventListener (Event.COMPLETE, thumbLoaded);

  thumb_loader. Name = i;

  thumb_loader.x = (my_thumb_width * I);

  }

  }

  private void thumbLoaded(e:Event):void

  {

  var my_thumb:Loader = Loader (e.target.loader);

  container_mc. AddChild (my_thumb);

  my_thumb.contentLoaderInfo.removeEventListener (Event.COMPLETE, thumbLoaded);

  Sprite: var loader = Loader (e.target);

  var my_thumb:Loader = Loader (e.target);

  trace (my_thumb)

  my_thumb.addEventListener (MouseEvent.MOUSE_DOWN, mouseDownHandler);

  my_thumb.addEventListener (MouseEvent.MOUSE_UP, mouseUpHandler);

  }

  private void mouseDownHandler(e:MouseEvent):void {}

  var my_thumb:Loader = Loader (e.target.loader);

  container_mc. AddChild (my_thumb);

  e.target.startDrag ();

  }

  private void mouseUpHandler(e:MouseEvent):void {}

  trace ("mouseUpHandler");

  var sprite: Sprite = Sprite (event.target);

  sprite.removeEventListener (MouseEvent.MOUSE_MOVE, OnMouseMoveHandler);

  sprite.stopDrag ();

  }

  private void mouseMoveHandler(event:MouseEvent):void {}

  trace ("mouseMoveHandler");

  event.updateAfterEvent ();

  }

  }

  }

  In your function mouseDownHandler target you 'e.target.loader', however, e.target is a Loader and Chargers have no property loader.

  private void mouseDownHandler(e:MouseEvent):void {}

  var my_thumb:Loader = Loader (e.target.loader);

  Try just "e.target" instead since this should be your code is looking for.

  var my_thumb:Loader = Loader (e.target);

  Although you might find you need to use "e.currentTarget" instead since e.target can point to the content of the loader instead of the charger itself

• Problem LOV... Turning the display value and no key-value

  Hello. Sorry for my bad English.
  
  I have a problem with LOV dynamic pop up.
  
  I have a simple form called nom_element and item_code containing the form A. users can create, update, and delete a new item using this form.
  Another form called form B has a field called item_code item_code is a dynamic field of LOV pop up and a request for this LOV is like that;
  
  Select nom_element d, r from item_master by item_code item_code;
  
  When I create the new record in the form B and LOV allows to find and get the item code, LOV works very well
  and he returns the key value in the field of item_code.
  But when I try to update the record (I have a link to the page of the form B), item_code field value is not the key-value of LOV, but is a
  Display value of LOV.
  
  Any ideas?
  
  Thank you.

  Hello:

  If you want to display the key value, and then create a new field that can be a test field or a tabled text (display only) and assign the value of the column of the reporrt link or just the column as it appeas in the database.

  If you use the form at the same time create and view, you might want to do this new field, but also your LOV field as conditional.

  Bruce

• possible to have a display value and the return of LOV

  Hello
  
  With the help of obiee 11g, I have a variable prompt that takes column as value.
  I have the report that I use a diff column eual to this prompt value.
  I wanted to know if its possible at all to have a view and a return value
  i.e. in the lov, we show a value and when we choose we choose a different value that goes to the filter
  
  For example. If we have an APAC region in the table, and then in the show LOV in Asia-Pacific and it returns APAC, so that
  in the data filter gets filtered using ICCA.
  
  Thank you

  You can try something like this sql in the Prompt Variable:
  SELECT CASE WHEN Office.Region = "ACPA" THEN 'Asia-Pacific' WHERE Office.Region = END 'EMEA' THEN 'EUROPE' TO THE "subject domain name.

  And then in the report so you need to change the column fx filter
  CASE WHEN Office.Region = "ACPA" THEN 'Asia-Pacific' WHERE Office.Region = END 'EMEA' THEN 'EUROPE '.

  Note: This is very good for the case where you have less no.. of LOVs in the column.

  Hope it will be useful...

• ADF table column display rounded value

  I have a table that I created by dropping a collection on a jspx.
  He has a column of type BigDecimal. for number of records, its value is as 0.3333333333337. This is defined by the external data source. However, there is no sense for the user to see such value in this column. I want to replace this behavior and display a value as 0.33 in this column where it displays the value as 0.3333333333337 and in general that two digits after the comma.
  How is it possible in 11 1 1 5 jdev

  Hello

  You can try these options as well if you want,

  "#1 option: place a component-> operations palette Converter->""on your field of adf table where you want to cut the number and you can set it as current/number/percentage and also give the number of maximum number of digits etc... (this option is appropriate if you do not want to touch your model layer)

  #2 option: change the level ViewObject.
  Go to your view object, select the attribute and go to the tab "User interface tips", select format type = "number" and to format = "#. #;(###.##) ' (or what ever fits for you)"

  Kind regards
  Nuka ravi

  Published by: Nuka Ravi on April 8, 2013 23:22

• Display the values of the 2D stacked column chart

  Hello
  
  I use the following sql which shows the percententage of errors in a month
  

  SELECT NULL
  ,      TO_CHAR(MA.DATE_LOGG,'Mon'),
  sum(decode(el.error_type,'On',1,0)) "Ons", 
  sum(decode(el.error_type,'Pa',1,0)) "Prt",
  sum(decode(el.error_type,'No D',1,0)) "No D",
  sum(decode(el.error_type,'Sys',1,0)) "Sys",
  sum(decode(el.error_type,'Oth',1,0)) "Oth"
  FROM
         table1 MA, table2 EL, table3 CR
         WHERE
                   MA.ERROR = EL.ERROR
         AND       MA.ERROR IS NOT NULL
         AND       MA.COUNTRY = CR.COUNTRY_CODE         
        AND       TO_CHAR(DATE_LOGG,'YYYY') = nvl(:P5_FILTER,to_char(sysdate,'YYYY'))
        AND       CR.REGION_CODE = NVL(:P5_REGION,CR.REGION_CODE)
  GROUP BY TO_CHAR(MA.DATE_LOGG,'Mon'),  trunc(ma.date_logg, 'Month')
  ORDER BY  trunc(ma.date_logg, 'Month')

  Now the values are displayed correctly, however, the stacked bar displays the real percentage value, for example 60% on stacked bar. When we mouse over the bar it shows "No D", Sys, Oth. Is there a way to display permanently type Decode and percentages?
  
  Apex 4.1 / 11g
  
  Thank you
  Sun

  Hi Sun,.

  If you would like to add the series name in the values displayed in the bar of the items themselves, then you will need to customize the XML graph and update the tag to embed {% SeriesName}. I've added an example for my sample application, indicating where the XML code must be changed: http://apex.oracle.com/pls/apex/f?p=36648:90. For a complete list of available AnyChart keywords, such as % SeriesName, please see the AnyChart online documentation: http://anychart.com/products/anychart/docs/users-guide/label-text-formatting.html?fromtree.

  I hope this helps.
  Kind regards
  Hilary

• Display of %, value pie

  Hi Experts,
  I'm running on a question
  
  I built a pie chart I want to display the data (value, name and percentage of Total) labels
  
  but in the properties, we will get only name and value or as a percentage of total and name.
  
  ! http://img268.imageshack.us/img268/5968/PieChart.jpg!
  
  
  
  How can I get both?
  
  Thank you
  saichand.v

  I have changed the formula.

  ! http://lh5.ggpht.com/__i78CpC3_Bc/Sx5uUxpThMI/AAAAAAAABuk/3OKoseu_3tQ/S800/concat%25NameVal.jpg!

  Criteria looks like

  ! http://lh6.ggpht.com/__i78CpC3_Bc/Sx5uU0mwIPI/AAAAAAAABuo/SnJ2pE2doSc/S800/criteria.jpg!

  And camembert looks like
  ! http://LH3.ggpht.com/__i78CpC3_Bc/Sx5uU3TteKI/AAAAAAAABus/wXuwoZ9Skuc/S800/PieChart.jpg!

  Published by: mail2diptesh on December 8, 2009 20:53

• At startup, Firefox still displays my windows and labels last time, even though I have selected the option to view my homepage.

  Question: Although my option is to show my home page at startup, Firefox still displays my my windows and tabs from last time.

  More details:
  I use Microsoft Surface Pro 3 with Windows Pro 10 and Firefox v 40.0.2
  I chose option to start Firefox to display my home page. Please see attached screenshot. The homepage is the Mozilla Firefox Start Page. However I tried other sites such as www.cognizant.com, www.cnn.com.

  I also tried to start by selecting a blank page. Always on starting Firefox displays the windows and tabs from last time.

  I also deleted the (renamed) prefs.js file and restarted firefox. This step NOT solved this problem.

  Help, please. Thank you

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  The user.js file will be present if you or a other software created this file and normally will not present.

  You can check its contents with a text editor (right click: 'Open with'; do not double-click).
  The user.js file is read whenever Firefox is started and initializes the preferences to the specified value in this file, so the preferences set via user.js can be changed temporarily for the current session.

  You can remove the user.js file if you do not create this file yourself.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  Windows hides certain default file extensions.
  Among them .html and .ini and .js and .txt, and you can see only a file name without file extension.
  You can check the file extension (type) in the file properties in Windows Explorer via the context menu.

• Display the values in a list in a certain way

  Hello

  I'm looking for a way to display the values in a list by the first value by a slash and the rest with an indentation.

  In other words in this way:

  /value

  Value1

  value2

  value3

  etc...

  Please see the attachment for a better reference where data are received and then filled to the window list.

  Thanks for your comments

  Thanks guys,.

  I endend up doing this:

  If (i == 0)
  {
  sprintf (current_log_view, "/ %s", cnfg_display_db [i] "");
  }
  on the other
  {
  sprintf (current_log_view, "%s", cnfg_display_db [i]);
  }
  SetCtrlVal (log_panel, LOG_LOG_TB, cnfg_display_db [i]);
                          
                          
  InsertListItem (dir_list_panel, DIR_LIST_RETR_LIST, current_log_view, i, 0);

  and it works very well!

  Thanks again

• Displays the value of double type

  Hi - another crazy me today. With the help of v % of the SDK. Memorization of the GPS coordinates in a persistent storage which is fine. So want to show these results on a screen by updating a labelField with the value.

  the code below, printLn myTest displays a value of something as 42.1234 gets so thin value. However, with the code so I get Double.toString (myTest) cann't find symbol even though I java.lang. *; imported. If I remove this line of double.toString then it will compile, but throws an exception error when I try to display on the screen. Can someone help a newbie pls...

  If (persistentHashtable.containsKey ("LVFLat")) {}
  Double myTest is (Double) persistentHashtable.get ("LVFLat");.
  System.out.println ("# latitude =" + myTest);
  String finalLat = Double.toString (myTest);
  displayLVFLat.setText (myTest);
      
  }

  You must read the documentation of the API and note the use of capital letters and tiny.  Capitals: the object, tiny, primitive.  Read the API done again and see what I mean.

  You want to replace this:

  String finalLat = Double.toString (myTest);

  with

  String finalLat = myTest.toString ();