Display problem multiscreen-cannot configure monitor two (side-by-side) with the ability to work on both

Similar Questions

• Have two old CD/DVD with the old movies of family 8mm on them.  When I try toopen them I get a statement that ' cannot they in format Samsung "suggestions?

  Have two old CD/DVD with the old movies of family 8mm on them.  When I try toopen them I get a statement that ' cannot they in format Samsung "suggestions?

  that is a difficult question. Try VLC to see if it will open to them. Usually when the disc appears on the desktop, if you click on it and let go, then press the clover sheet and I (get info command), you should be able to choose which application/program can open them. I have not already heard talk of the "samsung" format, I know there is a stranger there (lie format MTS from Sony). Regarding the conversion of them, maybe MPEG streamclip or hand brake? worst case scenario, you may need to spend some money to buy a video conversion app/program

  Sorry I can't help you more

  JB

• I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

  I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

  Modem... doing and... model number you have?

  What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

• Webstedet har fundet and problem og kan ikke Vice den side, of the forsoger of the som to fa vist. Nedenstaende muligheder kan muligvis hjaelpe dig med at November problemet.

  Windows Update

  Webstedet har fundet and problem og kan ikke Vice den side, of the forsoger of the som to fa vist. Nedenstaende muligheder kan muligvis hjaelpe dig med at November problemet.

  ? ER der en losning

  Unfortunately, disse men for a screw kun fransk pa support. Vaelg venligst said lands him: http://support.microsoft.com/common/international.aspx> og klikke pa PIL to support pa said sprog.

  ://Answers.Microsoft.com/en-US/Windows/Forum/windows_xp-windows_update/Windows-Updates/a19f6b44-74c9-48E0-b77d-2bc5f1b80c27 http://www.microsofttranslator.com/BV.aspx?from=en&to=da&a=http

  UTC/GMT is 12:10 on Sunday, November 11, 2012

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• Hello everyone, today I am trying to install adobe cc desktop, but I can't. What is the problem? I use firefox because I'm not with the chrome download

  Hello everyone, today I am trying to install adobe cc desktop, but I can't. What is the problem? I use firefox because I'm not with the chrome download

  Please see system requirements | Adobe Illustrator

• My lightroom is having problems to import images, I tried a different card with the same results readers

  My lightroom/mac is having problems to import images, I tried a different card with the same results readers

  This means that ccouldn can't ccopy Lightroom photos in the destination directory. You must determine which directory is specified in the Lightroom Import dialog box, it is on the right in the Destination. Then, you will need to enter your operating system and change the permissions on this specific issue to the WRITE permission.

• connect two Drop Down list with the code name.

  Hello guys,.

  I have ' starting my LiveCiycle, I have trouble linking two fields in the drop-down list. How can I connect two fields drop-down list? For example, a user selector, the name of the professional and the other menu drop-down is updated with the code of work based on the choice of the name.

  Thank you.

  Take a look at the attachment. It's a way to achieve this. The result like this...

  

  

  

  Steve

• Problems with the functionality of work plan...

  I have trouble getting the right size of the image when I export my work. After that I put my the artboard size, I export the image in Dreamweaver. When the image in dreamweaver, the "cropped" portions of the image are still there. Basically, the height and width of the image, I work with Illustrator is on 3 "x 4", but I only want displayed to 2 in. x 3 and didn't seem to do it with the tool of work plan.

  If you use save for web, make sure that "clip for work plan" is checked under the tab size of the image.

• Display problem w / XP - view does not size full screen of the monitor

  My two young boys did something with our desktop computer and now the screen whether in the office or Web pages are not full width of the screen of the monitor.  There are black areas on the left and right sides.  I've played around with the settings and empty is come.  HELP!!!!!!!!!!!!!!!!!!!!!!!!!

  "danno7123" wrote in the new message: * e-mail address is removed from the privacy... *

  My two young boys did something with our desktop computer and now the screen whether in the office or Web pages are not full width of the screen of the monitor.  There are black areas on the left and right sides.  I've played around with the settings and empty is come.  HELP!!!!!!!!!!!!!!!!!!!!!!!!!

  Open Control Panel and double-click on display - which will open the Windows XP display menu.

  Display Menus differ, then the next steps depend on the type of video card.  Therefore, you may have to adapt the following instructions.  However, a good place showing would be click on settings, then advanced.

  The display Menu will probably be a tab marked adapter.  If Yes, click the map tab and see if it allows you to display a list of the different modes of your video card supports.  Try the different modes.  (If you have a standard 4:3 ratio monitor, try the modes 4:3 ratio.  If you have a widescreen 16:9, try ratio 16:9 modes).

  If this does not help, see the control panel offers an additional icon for your video driver.  For example, Control Panel on my laptop includes a labeled icon driver Intel GMA for Mobile.  Double click on this icon you propose other format settings, include "keep proportion", "full screen (no border). and "Desktop".  Your boys may have changed one of these parameters.

  If all else fails, you can try a restore of the system at a time when your computer was working OK.  (Start |) Run | C:\Windows\system32\restore\rstrui.exe)

• Tecra S1 - display problem, even on external monitor

  One day I was using the laptop, surfing the net normally, everything was fine and suddenly the screen went bad... (photo below). I tried using an external monitor and still the same, so I'm sure that my monitor is fine and it is probably a problem of display card?
  I tried to update my display card driver and no luck, so I decided to use the recovery CD to restore the system and no luck once again.

  Here is a screenshot after the system restore... y at - there a way to fix this without taking it to a service center?
  Thank you
  Link: [http://i130.photobucket.com/albums/p262/ctb205/mon.jpg]

  Hi borist,

  It s really great that you could post a picture of your problem. Thank you!
  In addition, you have already tried a lot of as the recovery facility and an external monitor.

  Unfortunately, it seems to be a hardware malfunction of graphics card. :(

  This means that you will need to swap the motherboard because the graphics card is fixed on it. Motherboard is a party quite expensive and Tecra S1 is old notebook then maybe you can get a second hand or laptop motherboard on eBay and swap it out.

  Good luck! :)

• How is used to monitor two ASA (active/stby) with modules IPS Cisco MARCH?

  Hello

  The two ASA with IPS modules are in Active mode / standby. When I try to add both the two IP (active / standby) in MARCH, the MARCH will complain of duplicate names.

  How set up in MARCH to monitor the ASA with IPS with topology standby active?

  Thank you!

  Hello

  The fundamental problem with this scenario is that you have modules able non-basculement in a tipping chassis - think of the pair of failover ASA as a device and modules IPS as two completely separate devices.

  Then, as we have already mentioned, add only the ASA elementary school. (High school will never be passing traffic in standby mode so it is not really necessary in MARCH) Then, with the first IPS module you can add it as a module of ASA or as a standalone device (MARCH doesn't care). With the second module IPS, the only option is to add it as a separate unit anyway.

  In a failover scenario of the SAA swap IP but SPI considering you'll ever messages from ASA active you will get messages from the intellectual property of these two IPS depending on whether you are in the ASA active at the time.

  Remember that you must manually reproduce all IPS configuration whenever you make a change.

  HTH

  Andrew.

• Why display started moving, as shaking from one side to the other?

  suddenly the screen has started to move from one side to the other, she stop for 2 seconds, and then continue to move, as shaking.

  Hello

  (1) what is the brand and model of your computer?

  (2) remember to make changes to the computer before the show?

  I would suggest trying the following methods and check if it helps.

  Method 1: Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Method 2: Flickering of the Correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  I would say as you reset the settings of the monitor to factory settings and check if that helps.

  Please consult the manual of your monitor to perform the steps.

  You can also try to connect an external monitor to the computer to check if the monitor is defective.

  It will be useful.

• How to get applications running side by side with the two snap?

  I love how by-side "follow" mode keeps the two requests in short, so when I'm taking notes that I can have open at the same time calculator and use them simultaneously. I like better drag the window to the left and the very well because we're always "blurry" and you click on it so that it can be "refocused", if that makes no sense. Currently I still have a very limited choice, and I want to have all the two apps open side by side in the snap mode. How is it not all my apps (or even just open apps) show when I drag from the left? Is there a way or a mod to be able to do this?

  All modern running applications should show when you drag from the left.

  Applications that run on the desktop (such as Firefox or Microsoft PowerPoint) only be clipped with the "Windows 7 style nod" by dragging it to the left or the right.

  PS. modern applications that are broken still have the focus.  If you touch something in the calculator on one side, you will not be able to keep typing notes on the other side without clicking in it first of all for the focus, as always.

• Installation NOR Configuration Portable 4.7.0 failed with the following error Internal error 2203

  Dear reader,

  some advice please, I can't find someone else with a similar problem on the Forums or I'm looking in the wrong place.

  I'm having problems with installing an evaluation version of LabView 2010 64-bit on Windows 7 Lenovo ThinkPad laptop. I tried three attempts to install and uninstall and I get different messages each time. I run as administrator and insured that no other software is running, with partial success. I got to the stage where the application looks like it is running, but after a message "installation failed." So I don't know what are the underlying issues there might be if I have to evaluate, I suspect that the installation is corrupted.

  The Update Service indicates that there is an update, but the Service is in a loop where the bar past green to almost 90% and then again about 10%, with a frequency of once every 8 seconds or more. Looking at my traffic on the Internet, I do not see evidence of any updates being downloaded.

  I have attached a few screenshots, I can add a little more if needed / given the chance to. Files to trigger an internal error during installation vary. For example 124f989.ipi with-2147287035; 2aa73f. PIP with-2147287035; and a448f2.ipi.

  I've also seen error 1310 with 1becbcb.msi; etsoutenirles NI Logos XT, installation failure; 2 error: cannot perform action License Manager Updating OS Compatibility.

  At risk of key players away from what could be the cause but for purposes of completeness, note that the laptop power saving has been initially set at 15 minutes before sleeping, then perhaps there were a few download / partial of installation problems.

  Any suggestions regarding the best solution please?

  Thanks, Alex

  I don't know if you have one or two problems here.  But the problem with the update service seemed familiar.

  Take a look at this link.  I would try first, and if you are lucky, perhaps that other issues will disappear as well.