Transfer Windows 7 after free update to Windows 10

Similar Questions

• Reuse of Windows 7 license after free update of Windows 10?

  Hi all!

  I was wondering if I'll be free to reuse my Windows 7 license key after the free upgrade to Windows 10 on July 29.

  I've already reserved my copy, and yes I'm very happy. The only problem I see is because it is a version of Windows 7 OEM for Sony VAIO, so maybe it will not work if I use it in a new computer? If I can in any?

  I hope that you guys understand my question and good day!

  Hello

  Your Windows 7 OEM license has become an integral part of the upgrade to Windows 10 process.

  If you cannot reinstall Windows 7 as a dual boot either in your Sony or move it to another computer.

  OEM licenses that you cannot transfer anyway.

  OEM licenses are tied to the first machine, on which they are installed and die when the machine that dies.

  See you soon.

• (Redirected) Can't connect after free update to Windows 10 of Windows7

  I wasn't able to connect from the passage of Windows7 for Windows on my DELL OPTIPLEX DT 10 3020 462-3548 r

  Any help or ideas would be appreciated.

  Thank you!

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• After you have installed the free updates for Vista Home Premium 64 bit, Windows will not start

  After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot?  To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point?  Does anyone have an idea how to fix this?

  Do your system restore, then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 10 free update (until July 29, 2016) for Boot Camp on end of 2015 iMac?

  Hello

  Today, I noticed that this free update of Windows 10 is available until July 29, 2016.

  I didn't need to date, but will probably have to Windows soon.

  Is it possible to install this upgrade for my new iMac (retina 5K, 27 inches, end of 2015)?

  I learned that I can install only 10 Windows with Boot Camp, but none of the previous versions.

  I have a full version of Windows 7 Home Premium (DVD set & key)

  and later I bought an upgrade of Windows 8 pro (download and key).

  This help and how would it use?

  I never had the Boot Camp on this iMac.

  For now, I download the ISO from here.

  Thank you very much.

  If you are running OS 10.11 then Windows 7 is no longer an option to install through bootcamp. MS stopped support of the operating system, and therefore Apple.

  If you don't install window 10 by July 29 deadline you don't perhaps more power get it for free or to install on any device for free even if you downloaded and saved before that time. Windows 10 must be installed, so it can bind to a system configuration and report this configuration for Member States qualify for free use. After that this time, he has not stated by MS so the program will remain free or will be a purchase (once or monthly) MS said they will not charge for Windows 10, if it was installed before that deadline, the exceptions are 10 Windows for the use of the company.

  If you want to use a version of Windows on a Mac before winning 10 eye in VMWare or Parallels for Mac, or a previous instance of Mac OS X, where the old versions are supported under bootcamp.

• Free update to Windows 10 and Toshiba Recovery Media Creator

  I got the Windows Logo 10 on my laptop satellite and I'm waiting for the free update promised by Microsoft. I want to ask about the Toshiba Recovery CD Creator. I already have my DVD ROM from Toshiba Recovery set. What could we do? Will be the Toshiba Recovery able to create a recovery disc for Windows 10 upgrade to allow me to recover my laptop for Windows 10?

  Is there one advises or precautions?

  What could I do if I want, in the future, to refresh the Windows 10 installation?

  I recommend you to create an image after you have finished the upgrade to win 10.
  Image can be created using 3rd party software.

• Windows update - Windows Update is not restore my windows/desktop computer after installing updates

  When running Windows Update is not reproduce my office and rather trashes everything.  Ysterday I left to work with over a dozen research Internet Explorer open and this morning, I get to a Windows auto update cycle, which wrecked all.  Well Yes, they are lost and of course, I can spend an hour or more to find once again but my boss is breathing down my neck, as if it was my fault.  Microsoft how inconsiderate!

  Of course, I have a solution, TURN OFF Microsoft Update but is this really what Microsoft wants?

  Please people think.

  Hi jbeech,

  No, I don't work for Microsoft and I am not associated with them in any way (other than to receive awards and certificates I earned on my own).  I'm a volunteer civilian gift free time to help other people.

  I meant nothing personal, per my comments of workflow.  I was just trying to do my best to help you avoid this problem in the future and apologize if you took it the wrong way.  I agree with you that he must restore it things automatically (as it does when you use the hibernation), but maybe that can be done (at least not always) because updates may affect items that are open and to update these programs must be closed (which makes saving them more difficult because if they look different after the update) It may not work if we try to restore them unless they can find a way to save ONLY the information and it is a much more difficult task).  This problem does not occur with an accident or an unexpected shutdown (and a complete restoration in cases does not always work as well and completely that we hope - at least I had problems back exactly where I was with all that every time).

  While you can choose to turn off automatic updates, you don't want to not go for very long without updating your system, so checking periodically (although if you want to do on a daily basis - I would try at least every Wednesday at least since most updates are released every Tuesday) is important in all cases.  The option I suggested (i.e. automatic downloads but no facilities) would at least them already downloaded (you would not need to check - that they would be there) it would take much less time to choose and install if you show if off completely - and when you decide to install, you will find it takes MUCH more time because you need to download and install (unless they are already downloaded).  But it is entirely up to you.

  Good luck and best wishes!

• Free update to Windows 10

  OK, so I decided to do the free update to windows 10 in windows update but there was a mistake and he couldn't and I clicked it and it says it is the error code and it gave a link for support, so I clicked on that.

  have a fully legitimate enabled version of windows 7 sp1 Ultimate edition

  has chosen to chat with a technician, or something like that and a cat came and I described my problem, the tech connected to my pc and checked the version of windows and told me I should buy winows 10. I thought why? He said you can install the free full version but I couldn't activate it and some features would not be activated and pushed for me to buy a copy. I asked him how a free upgrade to a version full of paralyzed 10 = inactive and feature windows. And he gave me a sales pitch classic "even, I had to buy it.

  Just makes me want to go get my windows xp rear disc

  1.1 you said that rep support chat on the history of the activation of the computer, including the previous phone activation?

  1.2 is the current edition Ultimate Windows 7 edition, which was preinstalled?

  1.3 What is the edition that was installed when you had to use telephone support after the replacement of your motherboard?

  2 don't let Windows 10 try to activate after upgrade or you enter your product key from CoA during the procedure to upgrade [instead of click on the command to ignore this dialog]?

  3 I think you could reasonably retry the upgrade but do so using a USB installation rather than the upgrade itself.

  3.1 use of the procedural guide & links download Windows 10 and his companion FAQ page make the USB/DVD.

  3.2 prepare the upgrade by making the proposed GenuineTicket file in Clean install Windows 10 directly without having to first upgrade - Windows 10 Forums

  • I have no reason to suspect TenForums of publication of poor procedures but I saw not all reports in this forum of users who have tried this procedure.
  • When I move from another computer in a few weeks, I'll use this procedure to create the GenuineTicket file but I will consider it as an additional tool that could help me if I hit all activation issues.

  3.3 then run upgrade, indeed, as a repair installation [also referred to as an upgrade in Place] procedure.  There are instructions to repair the 10 Windows Installer with an upgrade in place - Windows 10 Forums] & in a thread of forum in this topic about How to perform an upgrade using the ISO for Windows 10 file repair Skip enter a key product during the installation process, regardless of the procedure that you use.

  3.4 you will have these activation options:

  • Complete the file GenuineTicket advocated by Windows 10 Forums.
  • Go online and let the computer attempts to activate itself using its normal process.
  • Settings, Update, Activation, Activate by phone
  • Please contact an Activation Center - see How to contact a Microsoft telephone product activation Center

  Denis

• Cannot install Itunes after the update to windows 8

  Ive had my phone for about 3 years and bought with windows 7 on it and installed iTunes and it worked perfectly fine, even after I did the free update to windows 8. However, I've recently had to factory reset my laptop and now when I try to download iTunes on it keeps saying that it is not compatiple with this softwear... Help, please

  Hello

  See if this helps you:

  "Remove and reinstall iTunes and the components of the software for Windows 7 and later versions.

  https://support.Apple.com/en-us/HT204275

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  ______________________________

  After you download and save iTunes > right-click on its setup.exe/install.exe > select run as administrator to install it.

  _____________________________

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• buttons (F1, F2) lighting control doesn't work after driver update chart 10 bootcamp windows

  Hi, after last update graphics driver via the apple software update in windows 10 macbook pro retina 15 "(mid-2015), buttons (f1, f2) lighting control is responding more... tx for any help. Michael

  On the side of OS X, download BC drivers on a USB FlashDrive to aid

  

  Re-run setup.exe from the Bootcamp folder on the USB after Windows and test.

• iCloud cannot sync contacts after 10 updated windows kb3176495 - how to fix?

  iCloud cannot sync after 10 updated windows kb3176495 - how to fix?

  Stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• After going into sleep mode after automatic update of Windows 7, Pavilion p6210y PC won't sleep

  In two weeks, after an update of HP launched automatically, my monitor is not recognized - I tried to restart my PC via the power button, but the action brought everything back without interruption to the place.  Finally I made the necessary update HP closed down and all was back to normal.  Last night I made a full stop and a Windows 7 launched updates (do not turn off your computer, etc..).  This morning when I powered back upward, I got messages on the windows during Setup, etc, then everything returned normally.  I worked for a few hours and left the machine - it entered into mode 'sleep' and now I can't get out of fashion "Eve".  If I power cycle the monitor, I can messages same "cannot detect.  If I try to shut down the PC via the power button, the light is orange/sleep, I hear a humming, then seeing if off, then back to orange/snoring, reverse, etc..  Keeps the bike like this.  I'm afraid that question a couple of weeks may have been a sign of early warning of a problem of h/w, but am not sure.  Can anyone help?  I am not very savvy h/w... and hope that it is something more simple than that.  The PC is 2.5 years.

  Your need to deactivate "standby" as soon as POSSIBLE to determine what is happening. You have 2 numbers because your motherboard is the infamous M2N78 - LA.

  That hum maybe the CPU fan:http://h30434.www3.hp.com/t5/Other-Desktop-PC-questions/To-all-with-M2N78-LA-CPU-fan-constantly-changing-speed/td-p/704265

  The other issue is more complex. Overheating the Nvidia chip. This chip share logic and circuits with the SATA hard drive controller and the graphics port. http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

  Your need to read each section and each answer. I suggest you save and move forward with all the measures that you feel is of advantage.

• Satellite P200-P100 - black screen after an update of Windows 7

  Hello

  I have a Toshiba Satellite P200-P100 running Windows 7.
  A few weeks ago after an update of Windows 7, my monitor would not show any image, that she lit up, but still no picture. Not even the BIOS it will appoint.

  I fixed it by using the system restore using a different monitor. The same thing happened again today, I must have ran the same update, but this time a system restore does not, any more than to reinstall Win 7.

  Any suggestions?

  Thank you
  Spre3

  Hello

  You mean you don't see anything about internal or external monitor, even switching of the output of the screen by pressing the FN + F5 buttons?
  Hmm. in my opinion has nothing to do with the Windows 7 update

  I mean the update/install of Win 7 OS should not affect the BIOS and you should be able to access the BIOS, even if no operating system is installed on the HARD drive!
  So I guess the question could be linked to the question of the motherboard or some parts placed on the motherboard

  Have you tried that?
  Remove the battery and unplug the AC adapter
  Then wait a little (1 hour) and then reconnect the two parts.
  Then try to turn on the device

  If this will not help the RAM modules must be verified.

• HP-101 webcam does not; After I updated its os to windows 7 (64 bit) to windows 8 (64-bit).

  I urgently need my webcam this week for a place of encounter of the celebrity, and I'm upset.
  I tried several measures then 15 and already spent a day on same; Please if anyone can help me through teamviewer; I'll give him some good buys online and owe him a big hug.

  Here is my pc name and number-
  HP Pavilion Notebook PC g6
  LP235EA #ACB

  All the drivers are updated

  the cam is nt shown under imaging devices; He has appeared in other devices Port_ #0005.Hub_ #0004

  Please msg me; If anyone can help me through teamviewer; Please

  hard reset, running on cmd, uninstalling the driver, analysis of material changes in the imaging devices, then reinstall etc etc; I've tried everything

  Here I found the solution at last
  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/HP-101-webcam-not-working-after-i-updated-OS-it-from-Windows/m-p/2732469#M21848