Display problem on screen HD +.

Similar Questions

• Display problem dual screen?

  I've been using CS5 without incident until yesterday, something has changed and I can't understand what cause island can be.  When I open an image in RAW, the image is mounted monitor, after adjestments and copy to open it used to open the file to work on two screen leaving the tools and menu on monitor one, now I have to manually move the screen image a two monitor.  Someone at - it suggestions.  And yes I saved the file with two active monitors without success

  I'm not sure about the opening of the vintage, but the same problem when opening, say, a jpg can be cured by going to PREFERENCES/EDITING/INTERFACE and ensuring that 'The documents open as tabs' are NOT checked. And then put your image on the desired monitor and close photoshop. So should be ok next time.

• HP Pavilion display problem - split screen

  
  

  Look on the bottom of your laptop on a white sticker

  Note the number P/N

  Turn on the machine and go to hp.com

  Put your P/N number in the search bar of hp

  Click on software downloads and the driver

  Click on your operating system

  find your graphics driver

  install

  Enjoy

  If you get lost in these steps made me know

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Retina MBP display problems

  I vaguely remember that there is a kind of reminder for display problems on some models of MacBook Pro retina. I don't remember the nature of the issue, nor the accurate models who were eligible. I have a 15-inch model, end of 2013, and what I see is pictured below (dead pixels). Can anyone remember if there was a recall and that this issue would be covered?

  

  2011-2013 models.

  To my knowledge the retinas did not have a reminder. However, I got my rMBP 2012 15 "screen changed due to ghosting. I do not know if Apple which is still.

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• Mac book air display problem

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after entering the password and pressing on enter three lines (not really lines they look more like lightning, appear from the top of the screen) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen this thick green line 3 inch appears and goes about a second or 2.

  help someone?

  Thank you

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  If no success, take a picture of the problem.  Make an appointment at an Apple store genius bar for a free evaluation.  If necessary, show the technician, an image of the screen.

  Ciao.

• Qosmio G50 - 10 h - strange display problems

  My Qosmio G50 ran less bright for a few months, then experienced intermittent fault by which logo Qosmio would display on the screen, then on the logo of windows for a fraction of a second, then the screen would be completely obscure. Restart or hit f5 function could resolve the situation. The problem became permanent. I can't get the screen works otherwise that to show the qosmio logo, a little of the windows startup, then blackout.

  I've lived the maintenance manual and options are ups? The screen? fluoro? Map of the system? That is the question... Without all the spare parts, it is difficult to determine what is the cause... I have a UPS on order, but they sent two bad parts and finally arrival right I don't know who's going to cure the problems

  Really need to use the computer. Your thoughts and help will be greatly appreciated

  Kind regards

  Simon Riley
  (ironysmile)

  You are right: it is not easy to tell what can be the problem. We can only speculate what part may be defective.
  Just one question: when you start the laptop and try to enter the BIOS settings you see anything on the screen? When you leave for awhile is screen after only a few seconds black too?

  You try to start Windows in SafeMode (F8 at startup)?

• Display problem on my A60 Pro Sat

  The display on my satellite A60 pro features a strip of wide pixelated of 6-7cm at the bottom that hides my mouse cursor and the taskbar. The mouse is still active behind it. Mode full screen using an external monitor is seen. The group changes with my office window or active but is just vertical color bands. What is the problem and can get rid of him.

  Hello, Robert

  Have you changed anything on your device or this occurs suddenly display problem?

  I'm really in idea. If you want you can reinstall the unit with recovery DVDs. If the problem persists it is obviously a malfunction of the display. In this case, you must contact partner in your country.

  If there is some serious hardware issue please let us know.

  Good bye

• Satellite L500-1XD constantly restarts & display recovery blue screen

  I bought a laptop Toshiba Satellite L500-1XD from an Argos store in August. Shortly after that I got it occasionally rebooted itself and displays blue screen of recovery saying that the laptop has recovered from a hardware failure. It has become more common recently and he often stops, displays the blue screen, reboots and done over and over again.

  I do not have many new programs on the laptop and that you have installed all updates. I deleted programs I have installed with the exception of Microsoft Office.

  Another thing that could be linked so that when the laptop starts, he says the Toshiba Service Station has stopped working and trying to find a solution to the problem.

  I'd appreciate any advice on how I might remedy this

  Thank you in anticipation

  Hi katrina_1,

  This means that the pre-installed Windows version is still installed, right?

  Well, I think that it of difficult to say why it happens it could be a hardware or software malfunction. The two may be possible.
  The reasons of the majority of blue screens are drivers or hardware itself are all properly installed devices in Device Manager or do you see yellow exclamation points?

  In your case, I'll try to reinstall Windows. Maybe it s only a software problem or driver
  Also if you have installed both modules of memory long live, test it with a module only. You can also use Memtest86 or another tool of diagnosis of RAM to test the memory modules RAM for failures.

• Display problem on Satellite U400

  I have a problem with my laptop screen, the display on the screen begins vibrates up and down, any1 can tell me the reason behind it?

  Thank you

  It is not easy to understand exactly what is happening.
  When this happens exactly, from the moment you turn on your laptop?

• Satellite U300: problem external screen

  Hello

  I just bought a U300 laptop, which is really nice. But I tried to plug in an external display on this subject and the result is really bad, and I don't understand why.

  My external screen is an E1900WS (19 ", widescreen, resolution: 1440 x 900 at 75 Hz).
  When I plugged it in, I asked to extend my desktop.
  My laptop screen is fine, but external has a problem: the screen moves to the resolution of 1440 x 900 at 75 Hz, but there are a few ripples on it.

  Like her, the image is not perfect. I tried to change my external display driver, but it's the same result.
  My OS is Windows Vista Home Premium (I don't like, so slow...).

  Do you think that 1440 x 900 is a too big resolution?
  Do I have to update my driver Intel X 3100?
  You have another idea?

  I'm sorry if my English is so bad, I'm french.
  Thank you.

  Post edited by: bertrand.lg

  > Do you think 1440 x 900 is a too big resolution?
  The resolution is not the problem, but you can try to change it and check if the same question is displayed using different screen resolutions.

  > Should I update my Intel X 3100 driver?
  Intel x 3100 is unclear for me so I think that you need to update.
  To my knowledge, some satellite U300 were equipped with Intel 965GM GPU.
  So if you want, you can use the latest driver from Intel page!

  > Do you have another idea?
  Unfortunately not! …Apart from upgrading the Intel reader.

• Display on my screen has turned 90% left on satellite

  Greetings from Scotland.

  I have a problem with my laptop screen and I was wondering if someone can help me.

  The display on my screen has turned 90% left, so the top of the page is to the left of the screen to the right of the screnn instead of up and down, running all of the ideas of how fix?

  concerning

  Kevin

  Hello

  You have an Intel graphics card?

  If Yes, then you could change the display position using this key combination:

  Turn to normal: CTRL + ALT + UP
  Rotation 90 °: CTRL + ALT + LEFT
  Rotate 180 degrees: CTRL + ALT + DOWN
  Rotation of 270 degrees: CTRL + ALT + RIGHT

  If you use another graphics card please check the graphic properties and advanced settings

• Tecra S1 display problem

  Unfortnately my tecra s1 hit the table of coffee on the ground, the screen immediately turned white. When I rebooted there was no display at all (black only)
  The computer works as I plugged on a screen external and that was very good. I tried to follow various troubleshooting guides online showing how to disassemble the laptop and reinstall the connector of the display on the motherboard, but this did not remedy the problem.

  I noticed coming from the display was a big bunch of wires going into a connector that I reinstalled, on the right hand side of the screen is a white and black wire to a connector and a pink wire that seemed to just float, I couldn't not whence he came. Does anyone have ideas on the subject of this thread or other tips that can help me.

  Thanks in advance

  Hello

  Unfortunately, mate, you won't find any manual disassembly here on the pages of Toshiba. These manuals are not for use public and designed only for the FSA.
  But I think you could google a bit and you should find a few details.

  I think that it is a display problem that I doubt that some loose cables could cause this problem
  In my view, the screen is broken and needs to be replaced
  To do this, you should get in touch with your technician ASP.

  Good luck

• Display problems with the Portege R600 and Win 7

  I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

  I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

  It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

  A refresh solves it.

  Anyone have any ideas?

  > I have an external monitor attached and get the same problem with or without him.
  Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
  It would be the worst case, because that would mean that the motherboard needs to be replaced

  But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible