Display problem dual screen?

Similar Questions

• Problem dual screen ' after working for a while, the screen of my laptop turns off.

  Original title: Problem dual screen

  I use two screens (laptop screen and separate screen) to work. Windows 7 operating system. After working for a while, my laptop screen goes blank as if he goes to the standby mode. The monitor never goes out. Is - this cos win 7 does not support the spl double screen laptop computer and monitor at the time of amse?

  Support COMPUTER told me he can't stand not and laptops are not designed to function as a two screens? Please notify.

  KR

  bs3dm

  Portable computers support two monitors. The problem may be caused by two reasons:

  1. incorrect power setting.
  2. the problem with the drivers.
  1. you can download and open Microsoft Fix it for the question.
  2. update the display drivers. If no update is available, uninstall the drivers (and software), restart the PC, install the drivers (and software), restart the PC and then check.

• Display problem on screen HD +.

  I just upgraded to Flash Player on my laptop Lenovo Yoga 2 Pro +. This machine has a 3200 x 1800 pixel display, and I had to use the screen at 300% Magnifier to read the options window that appears at the beginning of the update installation. The screenshot below shows the problem. Since screenshots seen on screens in standard resolution the picture show about four times larger than the problem, I have included the text of the Web page for comparison. The text of the problem less measure.5 mm in height. It is about 1 or 2 pts in print.

  

  I have been advised by Lenovo that this isn't a hardware problem, nor is it a driver problem. Unfair as it may seem, it's software to keep abreast. Santa is going to have a lot of these HD screens + bad boy in her purse. Adobe, you can help us.

  It's no good.  Thanks for the top of the head.

  I filed the bug following on your behalf:

  Bug #3909884 - Installation dialog box is Tiny on Lenovo Yoga 2 Pro HD screen + (3200 x 1800)

• Problem dual screen in CS5

  I used two screens with no problems until I installed PS CS5. Now when I drag an image on the secondary screen the canvas becomes black as soon as I relsease mouse. I can see executives etc and when you drag on the screen image can be seen, but as soon as I 'let go' it is blacked out. Really frustrating is that this does not happen in AI or Dreamweaver (or indeed any other program!).

  So far I have

  Reset monitors

  • When changed to display the same on both screens (clone) the image can be seen perfectly ok on both screens
  • When the secondary monitor is primary the problem persists (that is the image of the PS is blacked out on this monitor)

  Check updates for monitors (not necessary)

  CS5 checked up to date (no update required)

  Check updates (no need) graphics - NVidia GeForce 8600 GTS

  Uninstalled and re installed PS

  Done in a way that is annoyed at the unnecessary window on my secondary screen open

  Is there something simple I've chosen by mistake that prevents the use of my secondary display?

  Check if nVidia has released a driver updated for your hardware.  Go to their website to check.

  Unfortunately, from my observations, nVidia may have failed to follow their quality of driver with later versions for the 8600 GT.  I have reports from some of my own clients using my software OpenGL driver is embarrassing and have actually reported better results from a previous version of driver as the latest version.

  Other things you can try to work around the problem:

  • In Photoshop, Edit - Preferences - Performance, [Advanced...] and change to basic mode.
  • Try to disable OpenGL drawing entirely.  If that fixes the problem, it's almost a certainty that the nVidia Driver is at fault.

  -Christmas

• HP Pavilion display problem - split screen

  
  

  Look on the bottom of your laptop on a white sticker

  Note the number P/N

  Turn on the machine and go to hp.com

  Put your P/N number in the search bar of hp

  Click on software downloads and the driver

  Click on your operating system

  find your graphics driver

  install

  Enjoy

  If you get lost in these steps made me know

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• Tecra M9 - problem of extension Nvidia dual screen Mobile

  At work, we use M9 laptops with Nvidia graphics card.

  We have these laptops moored on a Mobile extension material

  I set the laptop to display to two external monitors that works well, until we want to disconnect the laptop for when the laptop at home.

  When they turn on the laptop, it will appear as the second screen and will not be usable.

  I was wondering if there are any settings that I can change to make him show the two external monitors when it is docked and display just the screen of the laptop when not anchored.

  I am aware that the utility of the device display, but this change does not offer two external monitor only offers internal and external.

  We are running Windows XP.

  Thanks in advance.

  You have the latest version of the BIOS installed?
  Have you installed the latest version of the display driver, common and Modules Extension Mobile software? (download them from the Web from Toshiba site)

  Have you tested with a new installation of XP from Toshiba (by running the recovery plant)?
  Maybe that's a problem of driver/software if you have a generic installation of XP is installed.

• Dual screen monitor - bad resolution options

  I have a Dell Latitude E6420 running Windows 7 Professional 64 bit which I use to several jobs in various locations.  Most have a docking station connected to one or two screens (one VGA, one DVI).  I run dual screen as often as I can, so, even at a workstation with a single monitor, I use the screen as a second monitor.  I also give presentations from my laptop, usually via a VGA connection port of the laptop.

  There is a special meeting room which has two screens plasma inside that depend on a VGA connection (must therefore always show the same performance and appear as the single monitor when connected to the laptop).  I use a lot this room.  Until recently, when I plugged it monitors would show an image full screen to ordinary resolution (800 x 600 or 1024 x 768).  I use these as secondary monitors, with my laptop as main screen.  I have check all monitor activity through the interface of the Intel HD 3000 graphics driver.  The pilot is the last available from Dell (9.17.10.3040).

  However, now when I plug in this House, secondary monitors show an image in a hurry (abscissa) and the single resolution options offered by the pilot are 1366 x 768 and 4 x 3.  Yes, FOUR by THREE pixels.  None of these are the native resolution (which should be 1024 x 768).  Nothing I can will get monitors to display full-screen with good resolution.  My colleague, with (in theory) the same laptop has no problem.

  There also seems to be some sort of cache or memory for monitor configurations.  Whenever I drop down to a workstation, Windows automatically configures the monitors in the way they were last time I was there (so with the monitors in the correct locations, resolutions, etc.).  Is it possible to reset this memory, so that I can start from scratch?

  Hello

  Please contact Microsoft Community. I imagine the inconvenience that you are experiencing right now. The issue you described can occur due to the incompatibility of the display drivers. So let me help you with that.

  You did changes to the computer before the show?

  I suggest you to follow the steps mentioned below and check if it helps:

  Uninstall and reinstall the display driver

  First download the display driver and save it to the computer. You can download the latest driver to display from the link below.

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=XGPWM

  Uninstall the display driver, then reinstall it. Follow the steps mentioned below to uninstall:

  1. Press Windows + R, type devmgmt.msc , and then click ok.
  2. Search now and do a right-click on the display driver , and then click Uninstall.

  For your reference, you can check the links below.

  Work and play better with multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows/move-Windows-between-multiple-monitors#1TC=Windows-7

  Hope this information is useful. Please get back to us if you need further assistance.

   

   

• How to choose which monitor displays "Preview full screen.

  I have a dual monitor and configured bridge Setup so that the left monitor I have windows 'maps', 'filter', 'Keywords' and 'content' and on the right (which is a better monitor and callibrated) monitor, I have the 'Sample' pane

  Now if I select one or more tumbnails in the "content" on the left screen pane, they appear in the pane 'Preview' on the right screen.

  Until recently, when I've quand j' ai choisi chose a single thumbnail in the "contents" pane (left monitor) he appeared in the "Preview" pane (right monitor) and hit the space bar he showed full-screen on the same monitor right and left click on the image full screen, I got a glimpse of 100%, yet once again on the right screen.

  Now, the problem is that suddenly, hitting the space bar, the full preview screen is no longer displayed on the screen to the right, but is displayed on the left screen. (Same problem for the preview to 100%).

  I hope I made clear to myself and someone knows how can I change this back once again?

  You have your setting of the 2 screen by enlarging the window in the two screens?  Then rearrange panels to achieve results you?

  If so, save you this as a workspace?  If so, reset the workspace.

• Retina MBP display problems

  I vaguely remember that there is a kind of reminder for display problems on some models of MacBook Pro retina. I don't remember the nature of the issue, nor the accurate models who were eligible. I have a 15-inch model, end of 2013, and what I see is pictured below (dead pixels). Can anyone remember if there was a recall and that this issue would be covered?

  

  2011-2013 models.

  To my knowledge the retinas did not have a reminder. However, I got my rMBP 2012 15 "screen changed due to ghosting. I do not know if Apple which is still.

• Firefox will not display on the screen even though with Process Explorer, I see active Firefox.exe but no CPU usage

  I use Firefox as default browser v10.0.2 on Dell XPS8300 Intel Core i5 and Windows 7 Ultimate and Compaq Presario CQ57 IO IO Intel Core i3 and Windows 7 Home. More frequently on the (approximately 90% of attempts) that Dell (50% of attempts) Firefox will not display on the screen when I click the icon. Cannot display other programs when it happens. I expressly say display because I believe that Firefox has started. To work around the problem, I installed Process Explorer on both machines and launch this program first, then click on the Firefox icon. When the problem occurs I see process Firefox.exe in the list of processes; some CPU consumed but, then, no CPU activity. If I click on the Firefox icon, yet another process opens in the list of processes, but with the same answer - some consumed CPU and then no CPU activity. If I have 2 processes running and kill the process from the 1st, the 2nd poster and then everything is normal. If I do not open it treat a 2nd, but kill the 1st process then click the Firefox Firefox is displayed and all then is normal. This problem has occurred since the original on the two new machines installation. I have updated the video drivers on both computers.

  OK, let's see if we can solve this problem and make it work for you!

  First of all, if you start Firefox in safe mode (restart your computer first, then when you open Firefox, hold down the SHIFT key) it starts more reliable? This is usually caused by a defective module. If this does not help, then restart Firefox, go to the Firefox, then add-ons button and disable your extensions one by one until you find the troublemaker.

  Also, try to update to Firefox 11, it has several bug fixes that might make life easier here.

  Just as a few troubleshooting steps base to ensure that we have all the bases covered,
  Run all Windows updates, install all required service packs, etc.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• Mac book air display problem

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after entering the password and pressing on enter three lines (not really lines they look more like lightning, appear from the top of the screen) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen this thick green line 3 inch appears and goes about a second or 2.

  help someone?

  Thank you

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  If no success, take a picture of the problem.  Make an appointment at an Apple store genius bar for a free evaluation.  If necessary, show the technician, an image of the screen.

  Ciao.

• Qosmio G50 - 10 h - strange display problems

  My Qosmio G50 ran less bright for a few months, then experienced intermittent fault by which logo Qosmio would display on the screen, then on the logo of windows for a fraction of a second, then the screen would be completely obscure. Restart or hit f5 function could resolve the situation. The problem became permanent. I can't get the screen works otherwise that to show the qosmio logo, a little of the windows startup, then blackout.

  I've lived the maintenance manual and options are ups? The screen? fluoro? Map of the system? That is the question... Without all the spare parts, it is difficult to determine what is the cause... I have a UPS on order, but they sent two bad parts and finally arrival right I don't know who's going to cure the problems

  Really need to use the computer. Your thoughts and help will be greatly appreciated

  Kind regards

  Simon Riley
  (ironysmile)

  You are right: it is not easy to tell what can be the problem. We can only speculate what part may be defective.
  Just one question: when you start the laptop and try to enter the BIOS settings you see anything on the screen? When you leave for awhile is screen after only a few seconds black too?

  You try to start Windows in SafeMode (F8 at startup)?

• Display problem on my A60 Pro Sat

  The display on my satellite A60 pro features a strip of wide pixelated of 6-7cm at the bottom that hides my mouse cursor and the taskbar. The mouse is still active behind it. Mode full screen using an external monitor is seen. The group changes with my office window or active but is just vertical color bands. What is the problem and can get rid of him.

  Hello, Robert

  Have you changed anything on your device or this occurs suddenly display problem?

  I'm really in idea. If you want you can reinstall the unit with recovery DVDs. If the problem persists it is obviously a malfunction of the display. In this case, you must contact partner in your country.

  If there is some serious hardware issue please let us know.

  Good bye

• Tecra M1 - dual screen can I?

  Can I dual screen with a Tecra M1? I'm running a Trident XP4 chip. I checked all the options and I can run a second monitor showing excatly the same thing as my latop monitor, but I want to run as a second monitor to measure in the office, is - it possible on an M1?

  Thank you.

  Dan

  Go to the properties of the graphics card (right click on the desktop and choose Properties), select the second display (2) and activate the option named extend my desktop on this monitor.

  That s all ;)