Display problems with the iMac

Similar Questions

• Display problems with the Portege R600 and Win 7

  I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

  I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

  It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

  A refresh solves it.

  Anyone have any ideas?

  > I have an external monitor attached and get the same problem with or without him.
  Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
  It would be the worst case, because that would mean that the motherboard needs to be replaced

  But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible

• Display problem with the lineTo method

  Hello

  There is a code to draw a horizontal line below. My problem is that the quality of the screen is bad. How to run the code in order to have a better view of the line?

  var monDessin:Shape = new Shape();

  addChild (monDessin);

  monDessin.graphics.lineStyle (1, 0 x 990000, 1);

  stage.addEventListener (MouseEvent.MOUSE_DOWN, clicSouris);

  stage.addEventListener (MouseEvent.MOUSE_UP, relacheSouris);

  stage.frameRate = 2;

  var temp: Number;

  function clicSouris(pEvt:MouseEvent):void

  {

  var positionX:Number = pEvt.stageX;

  var positionY:Number = pEvt.stageY;

  temp = positionY;

  monDessin.graphics.moveTo (positionX, positionY);

  pEvt.currentTarget.addEventListener (MouseEvent.MOUSE_MOVE, bougeSouris);

  }

  function bougeSouris(pEvt:MouseEvent):void

  {

  var positionX:Number = pEvt.stageX;

  var positionY: number = temp;

  monDessin.graphics.lineTo (positionX, positionY);

  pEvt.updateAfterEvent ();

  }

  function relacheSouris(pEvt:MouseEvent):void

  {

  pEvt.currentTarget.removeEventListener (MouseEvent.MOUSE_MOVE, bougeSouris);

  }

  Change the line that defines your lineStyle use pixel reference:

  monDessin.graphics.lineStyle (1, 0 x 990000, 1, true);

• Display problems with the E40

  Recently on an accident, I deleted a program on my computer that allowed me to see what the volume level was if I has increased or decreased. This is true also for when I pressed the button caps lock or brightness. The counter for these options button no longer appears and I need to know the name of this program of re - install. Are there other solutions such as re - install the graphics driver?

  Hi bizzo1357 and welcome to the community.

  It is the utility of keyboard shortcuts.  It is under the software and utilities on your driver page.

  Dave

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• What is the problem with my iMac mid-2011

  Hello

  Need help find out what is the problem with my iMac to mid-2011.

  Yesterday during a reboot it just never came to life.

  On turning the power on, I get the RINGTONE to start and that's it. The screen is totally black. Nothing behind tried with a torch.

  VRAM rearmament so far I tried repeatedly, unplug and plug, all kinds of combinations of keys in the carillon and nothing.

  Connected to an external monitor and shows nothing of too - no signal.

  Any way that I can know what is wrong with it before sending it to the service tech? I suspect bad graphics card but how do you ensure?

  From what you describe, it looks like a hardware issue that Apple will only be able to resolve, but not to despair immediately.

  Read it please get help with graphics issues on external displays connected to your Mac - Apple Support.

  I know that the title and subject are not suitable to your concern, but buried in this document is the following passage that contains three links describing the steps to follow.

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  That first, then write again for additional suggestions if you are still having problems.

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• problem with the 3/square icon on my iMac keyboard key.

  I have a problem with the 3/square icon on my iMac keyboard key. The icon of Fund will not work, I just get # when I use the up and down arrow to the left of the keyboard. A lot of ideas, everyone please?

  I just see the same question and the answer is the book symbol is alt + 3, I have a US keyboard. I wonder why that is? I bought my iMac to John lewis to the United Kingdom. Anyone have the answer for me please?

• Starting problem with the gray screen on iMac

  Hello everyone

  I'm a bit puzzled with a problem I'm having with my iMac 27 "a model late 2009, bought in early 2010, I had built at the time with 8 GB ram, 2 TB HD and fastest i7 Quad core processor available at the time.

  I'm running El Capitan, and all wise OS is perfectly up to date.

  The other week, after a systematic restart, I have a gray screen and little else.  Another reboot and everything was "normal", so I did not concern me unduly.

  Today, after that the Mac had been idle for a time during a call, the screen fell asleep as usual (I do not SLEEP the computer itself), but during his return and touch the SPACEBAR and key "ESC", the screen remains black.

  So I made a forced shutdown and restart.

  I get the screen gray and normal startup (no other sounds) chime followed by the apple logo and the startup progress bar.  He gets to halfway through the long, and then instead of bring to the top of the login page, it's just going to a gray screen Uni.

  So I restarted in safe mode, OK and ran disk utility a couple of times - at the first crossing, he noted, there a problem with the map of partition which can cause problems starting, but on the second passes and the following, everything has been noted to be OK - and the SMART status of disk has been verified.

  After a reboot - the same question as above - of carillon, gray screen with the apple logo, progress bar and then just a gray screen.  I did another secure boot and re-run of disk utility, rebooted into recovery mode and run disk utility.  And again, no problems reported.

  Another reboot and the issue was always there.

  So this time I rebooted into recovery again mode and downloaded a new installation of El Capitan.

  Unfortunately, there is no set - it is always start on a gray screen after the startup chime, the apple logo and progress bar.

  I have also removed all my account account startup items and disconnected all USB devices.

  I'm a bit lost for what to do next to be honest!

  Is there anything else I can do software wise, at home, or is it time for the repair material re shop perhaps?

  Thank you very much for your words of wisdom and support

  Kind regards

  John... :-)

  John here again: :-)

  Just a quick update which may help to determine what the problem is: I restarted in safe mode, after the reinstallation of the operating system was unable to initialize properly - grey screen again.

  However, as I have a home network, I found that I can not connect on the network with my MacBook Pro to the iMac, see all my files user on the iMac and even copy them across to the MacBook Pro with no problems.

  Everything on the iMac is saved via Time Machine on a Western Digital Firewire HD 3to.

  I also have uncompressed manual 'straight' copies of my music, movies, documents folders, etc, for an old time Capsule, currently acting as a bridge to my ethernet network wireless, and provide additional backup for those critical files - my music for example is ripped 350 odd CD, all legally purchased in ALAC on iTunes on the iMac - which represents a couple of months of work... lol... no way I want to lose that!

  So I'm a bit of a loss.  Disk utility reported no problem with the drive... I can boot into safe mode and recovery, but normal mode 'mode '... I always get the chime, the screen with apple logo and progress of the gray bar, then goes to just a gray screen instead of the login page.

  Help!

  My beloved Einstein had a hiccup!

  All comments appreciated and thanks again - hope this extra info helps

  Kind regards

  John... :-)

• Satellite L750D-1FD - problems with the display driver

  I got this laptop from my uncle and it was filled with junk and crapwares so I did a clean reinstall and upgrade Windows 7 Home to ultimate. I have a problem with the GPU, windows does not recognize it, or doesn't fly chart AMD.
  Processor is AMD A8 - 3520 M APU, and I think that the GPU is a Radeon HD 6620 G or something before the re-installation. I can't change the resolution, it stuck at 800 x 600, memory shows by n/a, Direct X features are not available, not from the downloaded display driver Toshiba worked.
  Dxdiag appears to the:

  Name: Standard VGA Graphics adapt
  Manufacturer: Advance Micro Devices, Inc.
  Chiptype: AMD ATOMBIOS
  : Type DAC: 8 bit
  Memory Approx.Total: n/a
  Current display mode: 800 x 600 (1 Hz)

  It nothing and can do with this laptop now because the GPU does not work as expected. Please, help me to solve this problem.

  Hello

  I found only Satellite L750D-1FD so I think you have this model. I want to help you on any other way. Here is the correct order of installation for Win7. Please check and install all the available stuff you can find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Win7 SP1
  4.9.2.0 TOSHIBA supervisor password utility
  TOSHIBA HW Setup Utility 4.9.2.0
  TOSHIBA Assist 4.02.02
  TOSHIBA ReelTime 1.7.18
  AMD driver 1.0.0.52 xHC
  8.834.1 - 110420 a-118118C-Toshiba AMD display driver
  TOSHIBA value added package 1.5.10.64
  ATI HDMI Audio Driver 7.11.0.7710
  Conexant Audio Driver 8.51.1.0a
  Wireless LAN driver
  Synaptics Touch Pad Driver 15.2.11.1
  V4.07 Bluetooth Monitor
  Atheros Bluetooth Driver Package v1.0.7 Filter
  Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
  Atheros LAN Driver 1.0.1.50
  Card reader Realtek 1.0.0.14
  TOSHIBA 1.0.4 Wireless LAN indicator
  TOSHIBA Sleep 1.4.2.8 utility
  3.1.8 TOSHIBA face recognition
  TOSHIBA eco Utility 1.3.2.64
  TOSHIBA HDD/SSD Alert 3.1.64.8
  TOSHIBA PC Health Monitor 1.7.7.64
  ConfigFree 8.0.38
  TOSHIBA Web Camera Application V2.0.0.21
  TOSHIBA V4.00.7.01 VCR - HAS
  TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
  TOSHIBA Disc Creator 2.1.0.9 for x 64
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 16_wMSI
  TOSHIBA Media Controller 1.0.86.2
  TOSHIBA Media Controller plugin 1.0.6.1

  If you need assistance more let us know.

• Problems with the display of the 3D graph

  Hello world

  I use a 3-d chart in one of my screws and I have problems with the display. See what it shows by yourself:

  

  So, as you can see, the chart does not correctly display the data. But one thing I know, is that the data are sent correctly, because when I copy the LabVIEW graphic and paste it into paint, what I see, this is the graph displayed correctly:

  

  Anyone know what may cause the problem? I also have a similar problem with a waterfall in 3D.

  You can always download the updates of ni.com so.

  I also went through a documentation on known LV 2011 issues. I was able to find something interesting onthis page:

  3D image controls can display transparently or LabVIEW crash on some graphics cards

  The 3D Picture Control is based on an OpenSceneGraph that uses OpenGL. It was noted several reports of the 3D image control crashing LabVIEW. In almost all cases, it was an Intel graphics integrated into question. This accident is due to a mismatch of the graphic material. Note: most 3-d charts use the 3D picture control

  Some possible workarounds are:

  • Update the video driver
  • Enable/disable hardware acceleration
  • Enable Aero in Windows 7
  • Disable Aero in Windows 7

  I might try these workaround solutions and see if any of them work for you.

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• Problems with the old game; Total Annihlation. Display a horizontal bars, turns into a rainbow of colors. Help, please. I love this game.

  I have display problems with a game that I just downloaded. The game is Annihlation Total; the game does not appear correctly. He works for a few seconds, all the graphics turn Rainbow and I can't seem to stop. Tried to run in compatibility mode; did not work. I hope there is a solution because this is one of my favorite games...

  Hi razorbladeapple,
  
  (a) what operating system do you have? And also to indicate the version?
   
  There is currently no information on the compatibility of the game with Windows 7.
  You can also try to check compatibility here: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
   
  (b) is the display horizontal bar change only whem you play the game?
   
  (c) you have installed the updated display drivers?
   
  Some devices have drivers you need to install yourself. If you download a driver that is not self-installable, follow these steps:
   
  You must be logged on as administrator to perform these steps.
   
  For more information, see: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
   
  Contact GT Interactive and check what they have to say about the compatibility of the game with Windows 7 because they are the best people to offer support.
  
  Aziz Nadeem - Microsoft Support