Display settings for files not recalled.

Similar Questions

• Windows 7 - enable the display settings for each folder: folder options, "save the display settings for each folder".

  Hello.

  Any one out there know how to activate the display settings for each folder in WINDOWS 7?

  I'm especially interested in adjusting the size and the location on my screen.  A few days earlier, before moving to Windows 7: I could open a file, place and size where I wanted, and when I opened it again, presto!, even spot and size.

  I've seen several posts of users seeking to turn this feature off.  I'm looking forward in opposition.   I would like to than windows "remember each folder view settings.  This particular configuration seems to no longer be available in Windows 7, screenshot attached:

  Thank you for your time and your interest.

  Best regards

  Fernando

  Have you tried the solution here:

  "The changes in the size, view, icon or a file are lost.

  <>http://support.Microsoft.com/kb/813711/en-us >

  HTH,

  JW

• How can I change the display settings for the lifecam VX-2000 software provide a mirror image?

  I've tried everything and looked everywhere online.  Can you help me?

  Hi ToniDanile,

  You can change the display settings for the LifeCam software to fix the problem.

  For more information see the article mentioned below:

   

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

  Let us know if it helps.

• I'm trying to start using the compatibility feature, the display settings for Starcraft: run in 256 colors, run in 640 x 480 screen resolution... I get an error__It tries to start and modes then errors on switch...

  The error has occurred trying to change the video mode was:
  It is not implemented
  vidinimo_PC.cpp line 160
  SetDisplayMode

  Dell Inspiron 1010; Intel Atom; @1 Z530 CPU. 60 GHz; Windows XP

  Hello

  Hoping that the Direct X is updated, if not update DirectX first and then try the following:

  Reduce hardware acceleration can help you:

  -To disable or reduce the hardware acceleration on your computer, perform the following steps:

  Click Start in the lower left corner of Windows Vista.
  Click Control Panel, click appearance and personalization, click personalization, click display settings and then click Advanced settings.
  Click the Troubleshooting tab, and then click on change settings.

  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider until it is one notch to the right of none. It is the basis of acceleration.

  Click OK twice, and then close the window.

  -Try the latest patch from Blizzard.
  http://us.Blizzard.c...MP;PageNumber=1

  Good luck $

• My toolbar does not display tabs for "file, Edition, view, Favorites, tools.

  Google Chrome has been installed while I was away. Also can't find firefox bookmarks. Help!

  For more information about how to restore it, see https://support.mozilla.com/kb/menu+bar+is+missing

• Display settings for NB100 - 11R

  Salvation had to reboot this machine the disc supplied, Tosh but never since then have been making intermittent problems with display - becomes black for a while then falls in a much lower resolution. While I found if you turn off an on again, it resets it, is not really a long-term solution. I also found an order in the forum to reset the configuration changes, but again, it is in the short term.

  However when I looked in the poster and the graphics program, the monitor is listed as 'plug and play' and for the graphics adapter, the first parameter is empty and the second said generic VESA.

  Of course, this is not normal? Should there be different settings? I have to load a driver?

  This might be useful:

  http://UbuntuForums.org/showthread.php?t=362360

• Format options for file not appearing is not in the Save dialogue box sub - InDesign CC

  If I was working with a legacy file (an .eps of illustrator4) that I placed in InDesign CC, and when I went to export in a jpg file, the ability to choose a file format different from the bottom of the dialog box was missing. A I knocked a few shortcuts to remove options, or is it a bug that occurs when you work with some legacy files? I have restarted InDesign, rebooted my laptop, deleted my preferences of Adobe, reset my adobe warning dialog boxes, and I can not export or save as another file format because the option does not appear. And no matter if I create a new file or open an existing one. Help, please. See the photo below. No option for the format of the file at the bottom of the dialog box.

  

  I had the same problem. Try to reinstall Indesign and everything should be ok

• Display settings for effective resolution and INDD

  Hi guys,.

  I recently have been doing some memory problems and questions-exporter etc and wanted to know if my effective resolution is well above 300 who asks the questions.

  now...

  INDD shows typical display @ 72 dpi OK?

  It would be an image with 300 real and say 1500 effective (20% of original size) tries to display on typical to 360pp

  (1500/300) x 72 = 360 (the image is 5 x less that 100% resolution is so the preview 5 x 72 dpi - 360ppi?)

  She's redimmensionnement down then by the conversion of an extract of 72 DPI or is what makes the image 72 dpi @100 % and then reduce this x 5 to get a glimpse?

  because the images with a high-power much clearer than images with 300 effective overview

  and with more than 140 images in my catalog, this additional treatment would be the cause of my mistakes on export and just chuggy Preview in typical fashion?

  
  to simplify a little

  That's how work the previews?

  300 and 1500 @ high quality
  72 and 360 @ typical display

  or is it like this

  300 and 1500 @ high quality
  72 @ typical display

  the numbers "BOLD" is the resolution that indesign will display

  DammitRAWR wrote:

  Where can I turn off resample in indesign to test this point?

  or do you mean the resampling when I scale down the image in photoshop?

  and the general consensus that placing images and their downward revision, is only a bad design practice?

  all images must be placed as close to the possible final output size?

  Resampling is set in Photoshop. ID scales only, that's why you see the actual resolution.

  In photoshop, you can use the same pixels to create a really big image (physical dimensions) at 72 DPI or a smaller physical size at a higher resolution. If you record at 72 dpi, the bishoprics of preview ID is essentially the same size as the image itself, while if you save at 1200 dpi preview will be greatly sous-échantillonnées (and it will look like in typical preview mode to identity card).

  With respect to the scaling in ID, my feelings are that the scale is OK when the result will take you to the beach target for your desired effective resolution (i.e. it is not a big problem, enlarge a 1200 dpi image to get an effective resolution of 300 ppi or reduce an image of 100 ppi for 300 effective ppi) Although a lot of people will tell you it's better to do the scaling in Photoshop (and I'm usually in this camp for high-end work) to be able to fix the sharpening, etc.. Ideally, your images will be on your page inside more or less 10% of the target effective ppi, but it would be better to be a little down to cadence in Photoshop. Downsampling in Photoshop or ID to output will result in still a certain lack of details and if the effective resolution is too high you will be downsampling output, thus, nothing is taken for granted by usingf images that are too large, and your performance will suffer.

  If your desired resolution is 300 ppi and your effective resolution is 4500 PPI, you should really be resizing in Photoshop.

• Photoshop CC continues to change my display settings of windows folder

  Whenever I have save a PS file in a specific folder on my desktop, the display settings for this folder is reset to the default values.

  For example, I like the vision on 'details' and sort in descending by "date modified" order (no 'date', which means that I have to uncheck the field 'date' and check the field "date modified" whenever that happens)

  I opened and closed this file on my desk several times a day and the view remains the same, but as soon as I save a file out of PS and navigate to this folder from the backup dialog box, the display will return to "thumbnails" once again. which would be ok if it only showed that way while in the PS, but once that happens, it changes the view even when I open the folder on the desktop.

  This does not happen with other programs, Psalm one, I use windows 7 pro 64-bit.

  It is interesting to note that if I change the display inside registration settings dialog box, those changes do not appear when I open the desktop folder.

  In addition, once I have make changes, PS will keep the settings for all subsequent save operations, even after the closing and reopening of the program. But once that I reboot I'm at square one.

  Photoshop has no control over that. It's a BONE setting, and open/save are the OS (not really controlled by Photoshop) dialog boxes.

• Vista don't forget display settings; move the second monitor from top right.

  Windows Vista is often (not always) forgotten my display settings for my external monitor.

  I have a Dell XPS M1530 laptop with a NVIDIA GeForce 8600 M GT graphics card.  The laptop is running Vista Home Premium SP2 with all updates applied.  I have a Samsung LCD monitor mounted on the wall above the laptop screen that I use as a second monitor (driven by the output of the laptop).

  I updated the display settings so that my second screen is located above my main monitor. My problem is that Vista often forget this parameter after the standby or hibernation, and returns the value by default display settings of 'second monitor is to the right of the primary monitor'.  This means that I often walk in the display settings to do the right thing (pardon the pun).

  I've seen other messages to try to use 'View to connect' in the settings of Windows Mobile (win - X).  However this option only supports a second monitor is located on the left or the right of the main screen - not on it.

  Any suggestions before I have eventually give up and drill several holes in the wall to mount the external monitor to the right of the screen of my laptop?

  Thank you.

  In my case out of sleep the primary monitor (laptop) is off (still asleep) while the second monitor is on but the resolution is that the screen of the laptop and he took the position of the main monitor. I push the "fn" + 'f4' key to switch between monitors, laptop monitor turns on but the secondary display stands. Another pressure on the keys cause the laptop monitor to be shared and the secondary monitor is now on, that's what toggle keys do. On the third time that the keys have pushed the two monitors came the resolutions they were Setup.

  Try using the ToggleKeys. On some laptops the 'f' key to toggle is "" f5"key. My 'f4' key has the image of two monitors.

  I hope I could help

• Problem with the extended help display option for multiple displays.

  I have a laptop with an internal (#1) designated as my screen main screen. At work, I like to use the 'extended display' option for several screens to use the external desktop as #2 display monitor. However, at home I have the screen internal one on my laptop. So when I open an application like Excel at home, the window does not appear, but the application is running, as I confirmed with the Task Manager. So far, the only way I know to solve this problem at home is to change my display settings for multiple views to show on display #1 only. Is there a practical way to deal with this issue in addition to change the display settings whenever I move from work to home and vice versa?

  Hello

  In Windows 7, you can simply press the Windows Logo + P key.

  In the menu, select the item from the computer only .

  Concerning

• PCoIP - Display properties tab is not displayed

  Hello

  I'm testing View 4 and PCoIP Protocol.

  I have multiple monitors configured in the settings of the desktop in the view manager, checked the permissions and policies (Group and the view of the AD Manager). When I enter the properties to display the desktop virtual the settings tab is not displayed, so I can't allow multiple monitors. If I connect via RDP Protocol, I can access the desktop settings tab and configure multiple monitors.

  Virtual desktops are running Windows XP Pro SP3.

  Can anyone help?

  If multimon does not display settings tab will not remedy. This is an indication that your VM and or Desktop Pool is not properly configured for multi-monitor.

  View Manager.

  Change the Office pool or the person

  Since the Office / pool and the protocol settings settings changing your display 1

  Wait for the change to take effect in vSphere

  Change the office pool or new individual

  Since the Office / pool and the protocol settings settings change the display to the desired monitor and resolution setting

  Wait for the change to take effect in vSphere

  Vsphere can turn off virtual desktops and then their return on

  WP

• How we can search for files in the Webcenter 11.1.1.6 content?

  Hello

  I have a requirement for a client where they want to use the advanced search of the AAU to search for files (not articles).

  Version: Webcenter content 11.1.1.6

  Contribution using folder_g files
  

  I founded a model pre-built for searching for files. The name is COLLECTION_GET_SEARCH_FORM

  
  

  Here is an example of this model and it works
  

  http://euedocs.emersonprocess.co.UK/idcplg?IdcService=COLLECTION_GET_SEARCH_FORM

  When I try this service on my own content instance Webcenter, the model is loaded. But when I click on search, nothing happens.

  The drop-down lists containing ' Contains/pairing /...» "they are also not responsible.

  I did some research on the Support of Oracle and I created this article:

  Limits for fast searching of the Collaboration of records(1071778.1)

  https://support.Oracle.com/epmos/faces/UI/km/SearchDocDisplay.JSPX?returnToSrId= & srnum = & _afrLoop = 418199051953706 & type = c...

  I'm still stuck on this issue. What configurations are absent?

  Is someone can help me?

  Thank you very much.

  I contacted support. Here's the answer:

  Hello

  The feature you're looking for is something that is not currently present out-of-box.

  He used to work in the classic configuration only, the way back.

  And 11 g, classic layout no longer exists.

  This is a request for development with our development team.

  Bug 6488476 - INCLUDE "SEARCH FOLDER of HIERARCHY" AS SEARCH OPTION

  Thank you

  Fatima zahra

  Thank you SrinathMenon for your reply also.

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Have W2071d monitor, display settings do not allow non-native resolution matrices

  '' Recommended '' this monitor width setting is 1600 X 900, but when I go to the "Display" dialog box, the only options available to me are that were available using my old monitor.

  The monitor "selected" for common use (under "Advanced"-> tab monitor in the "Display settings" dialog box) is dangerously just labeled "Default monitor", and while the system produces to the monitor, it only does these original native resolutions, so that, under factory settings, the image is stretched horizontally to a significant degree, and when I put it to adapt to the proportions rather He's a little blur hired on small fonts/texts during the largest possible display setting, almost as if I ask it to produce makes me superior to output 1-to-1 ratio of pixels and the entire surface of the monitor is not being used anyway.

  In any case, the button/dialog box 'Properties' is not yet available on the tab 'monitor' breast, so I can't try to update the driver. I don't really know what to do at this point. In addition, the computer now tells me whenever I start that he detected new hardware connected, but it may not recognise, does not support installation at home, but whenever I try to point it to the drivers it tells me that the file contain no information about my hardware device.

  VGASave is the 'default' for Windows XP driver if there is no other driver available for the system. It is possible that some sort of error, or maybe an automatically Windows Update installed, breaking your graphics card driver. I would certainly try reinstall the driver as a first step of troubleshooting.

  Here is a link to the latest version of the driver for the Radeon XPress for Windows XP series:
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/integrated_mce-XP.aspx?type=2.4.1&product=&lang=us&Rev=10.2&OSType=Windows%20XP%20-%20Professional/home

  Good luck! Let us know how it goes!