Display settings for effective resolution and INDD

Similar Questions

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• How can I change the display settings for the lifecam VX-2000 software provide a mirror image?

  I've tried everything and looked everywhere online.  Can you help me?

  Hi ToniDanile,

  You can change the display settings for the LifeCam software to fix the problem.

  For more information see the article mentioned below:

   

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

  Let us know if it helps.

• Windows 7 - enable the display settings for each folder: folder options, "save the display settings for each folder".

  Hello.

  Any one out there know how to activate the display settings for each folder in WINDOWS 7?

  I'm especially interested in adjusting the size and the location on my screen.  A few days earlier, before moving to Windows 7: I could open a file, place and size where I wanted, and when I opened it again, presto!, even spot and size.

  I've seen several posts of users seeking to turn this feature off.  I'm looking forward in opposition.   I would like to than windows "remember each folder view settings.  This particular configuration seems to no longer be available in Windows 7, screenshot attached:

  Thank you for your time and your interest.

  Best regards

  Fernando

  Have you tried the solution here:

  "The changes in the size, view, icon or a file are lost.

  <>http://support.Microsoft.com/kb/813711/en-us >

  HTH,

  JW

• I'm trying to start using the compatibility feature, the display settings for Starcraft: run in 256 colors, run in 640 x 480 screen resolution... I get an error__It tries to start and modes then errors on switch...

  The error has occurred trying to change the video mode was:
  It is not implemented
  vidinimo_PC.cpp line 160
  SetDisplayMode

  Dell Inspiron 1010; Intel Atom; @1 Z530 CPU. 60 GHz; Windows XP

  Hello

  Hoping that the Direct X is updated, if not update DirectX first and then try the following:

  Reduce hardware acceleration can help you:

  -To disable or reduce the hardware acceleration on your computer, perform the following steps:

  Click Start in the lower left corner of Windows Vista.
  Click Control Panel, click appearance and personalization, click personalization, click display settings and then click Advanced settings.
  Click the Troubleshooting tab, and then click on change settings.

  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider until it is one notch to the right of none. It is the basis of acceleration.

  Click OK twice, and then close the window.

  -Try the latest patch from Blizzard.
  http://us.Blizzard.c...MP;PageNumber=1

  Good luck $

• Building for all resolutions and the OS app

  Hi all

  a very strong issue for me: I want my application to support a lot of existing resolutions and operating systems, from 4.6 to 6.0. I know how to write this code, so my headache lies in another field - compatibility. Typical problems and pitfalls one may face? It's a way to write * secure * code that works both touch and non touch devices smoothly?

  Some APIs are available only in the newer versions, some are deprecated. For example, now I use "navigationClick" to manage both trackball and touch events, and it works fine. What other functions handle that you know will work for sure on touch and non touch devices?

  Yes, 4.6 and 4.7 + need to the different versions, not so much because of the new API, but because 4.7 devices set lower versions in a ugly compatibility mode.

  I have much experience with coding special touch features that I have them never required in my applications. I've implemented workaround found a colleague-based features:

  You can detect a touch device using canvas.

  public static final boolean IS_TOUCHDEVICE = new Canvas() {}
  protected void paint (Graphics graphics) {}
  }
  }. hasPointerEvents().

  based on this value I double the size of some input fields, so people with sausage instead of fingers can manage the

  As there are a lot of resolutions and new devices bring even more I would never consider to create a version by resolution, it would never end!
  a possible solution would be to create an additional library that contains only the graphics for a resolution, but it depends on your application if saved space would be worth for the extra complexity (and the cost of the added support).

• Display settings for files not recalled.

  I have XP MCE, "Each Remember folder view settings" in Folder Options. Years he has worked on all folders, and everytime I open one it has the same properties as the last time.

  Recently, just the high back, C:\, does not remember its settings, in particular details and arrangements. All lower level folders are OK.

  This can be corrected?

  You can also try the solution here:

  "The changes in the size, the view, the icon or the position of a file are lost"
    <>http://support.Microsoft.com/kb/813711 >

  HTH,
  JW

• Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  I got some video footage of various camcorders dating back to 1989 converted to DVD so I could create a newsletter. I couldn't have windows media player to run. Any help out there?

  I got some video footage of various camcorders dating back to 1989 converted to DVD so I could create a newsletter. I couldn't have windows media player to run. Any help out there?

  =================================
  Have you had success playing other video DVDs?

  Maybe you need a DVD decoder?

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Also, you could try the free VLC Media Player:

  VLC Media Player
  http://www.videolan.org/

  And it may be interesting to try to download and install
  one of the following codec packs:

  * Proceed at your own risk *.

  Info about CCCP
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  Good luck...
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Display settings for NB100 - 11R

  Salvation had to reboot this machine the disc supplied, Tosh but never since then have been making intermittent problems with display - becomes black for a while then falls in a much lower resolution. While I found if you turn off an on again, it resets it, is not really a long-term solution. I also found an order in the forum to reset the configuration changes, but again, it is in the short term.

  However when I looked in the poster and the graphics program, the monitor is listed as 'plug and play' and for the graphics adapter, the first parameter is empty and the second said generic VESA.

  Of course, this is not normal? Should there be different settings? I have to load a driver?

  This might be useful:

  http://UbuntuForums.org/showthread.php?t=362360

• Web client - System Configuration node displays 'Unknown' for the Uptime and the workload, no value for IP &amp; Hostname

  When I connect on our vCenter 6 Update 1 device (embedded PSC) via the Web Client with integrated Active Directory ID, select "System Configuration", then select the node for vCenter, summary screen displays all the information IP or host name.  In addition, the status of availability and workload for storage/memory/swap/load of work view all 'unknown '.  See attached photo for reference.

  All values under management-> settings are also empty.

  When I login with [email protected], all the above values are displayed and I can change the settings of the device of vCenter as expected.  This made me suspect a permission problem exists, but I cannot know what SSO group to add our AD is less to enable management or control of the aircraft from vCenter for that it works as expected.

  Already tried to add our accounts to the following groups in SSO under the vsphere.local domain:

  DCAdmins

  SystemConfiguration.Administrators

  ComponentManager.Administrators

  Directors

  This information on the purpose of each group unfortunately did not help me understand which could apply:

  Groups in the field of vsphere.local

  Thank you very much for the help!

  I just did some digging on this myself (we deployed now U2 6.0) after I tried the same things (adding AD users in the SSO domain groups, etc. etc.) without success.

  What I have found is that it is simply a WELL-KNOWN PROBLEM with 6.0 U2 and maybe they'll fix with U3 6.0 when that comes out (later this summer)?  Maybe it'll be 6.5 at that time, with an announcement to the VMworld 2016 or something - who knows.

  The workaround is a joke--suggesting the deployment using only the SSO domain by default.  Well, which is never going to happen naturally, so he says as a workaround is, if you really need to get and display status, etc. from the web client, you simply connect with your [email protected] account that was created at the initial time of installation.

  VMware vCenter Server 6.0 Update 2 Release Notes

  *****

  Failed to configure and view information about the vCenter Server Appliance by using the System Configuration page in the Web Client vSphere with errors
  Connect to the instance of vCenter server in the vCenter Server Appliance with a user who is located in a custom name (different from the default vsphere.local) Single Sign-On the field by using the Web Client vSphere. On the vSphere Web Client home page, click on the System Configuration and select nodesunder the System Configuration. If you try to change the settings, restart or power off a node of the vCenter Server Appliance, the operation fails with one of the following errors: An internal error has occurred - Error # 1009 and Not authorized to use this API . If you click on the summary, monitoror Manage tabs, some device information cannot be displayed.

  Workaround: deploy the vCenter Server Appliance by using the domain of Single Sign-On by default: vsphere.local.

• NEED HELP FOR THE RESOLUTION AND QUALITY?

  Hi guys

  I've done of these vector portraits type in photoshop for the past two weeks, we were all going well until, when someone sets up as a picture on facebook etc the quality is not as good as when I just display the image on my computer.

  I was from the new photoshop and using 800 x 800 pixels and the resolution to 72 pixels/inch, I wrong here somewhere? or is it the fact that I use photoshop to do this? im sure there are many people who will advise me to use illustrator, which I thought a lot to do. but I would like to know if this can be fixed in photoshop first.

  Thanks in advance for your help

  

  It's a little pixel-ish in the areas...

  

  P.S. I also notice that it is working in the "defective" text box

  Once your support for a screen, you only need to worry about the pixel dimensions, the PPI is irrelevant. Facebook will tell you what's the resolution of each image. To my knowledge, Facebook does not support svg graphics in the opposite case, you could use Illustrator. Just make sure that when you don't create vector graphics in PhotoShop that you save a copy in a file buffer, as the jogging and png do not support vectors.

• On the display screen for shortcut keys and locking touchpad issues

  Hello, using hp g62-140us, win7 Ultimate 64-bit.

  I got the OEM win7 home but now I have reinstalled windows and I use win7 ultimate.

  with the OEM version, I got the screen works for volume control, for example, but it has now disappeared. What should I do to bring it back?

  And my other problem is to lock my touchpad I can double click in the upper left corner of the touch pad. but I can't unlock it in the same way, even if I could before. What is wrong with him? (now what I do is to lock the computer and then go back to my user)

  Thank you

  Here are the tweak reg... for a key side keys (this is called)

  Internet key:  HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\Appkey\7 'Association '=' http'; Change the value of the string "http"

  Calculator key: HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\18 'ShellExecute "=" calc.exe "; Change the value of the string "calc.exe"

  Key by e-mail:  HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\Appkey\7 'Association '=' mailto'; Change the string "mailto" value

  Cyberlink PowerDVD/Mediasmart key: HKLM\SYSTEM\ControlSet001\Control\MobilePc\HotStartButtons\2 "Application" = "file C:\Program (x 86) \Cyberlink\PowerDVD9\PowerDVD9.exe"; Changethe string value "C:\Program file (x 86) \Cyberlink\PowerDVD9\PowerDVD9.exe"

  On the touchpad, I guess, we have 15.0.7.0 version... I suggest you uninstall it drawn from the program and features and install the older driver 14.0.13.1 by http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-80040-1&lc=en&dlc=en&cc=us&os=4062&sw_lang=&product=4164680 and check...

• You can use "NERO 8" to change the default settings for playing music and viewing photos?

  Original title: ideas: insert an error code or give a brief description of what you're trying change default setings in automaticlly reading page and use "NERO 8" for some of devaises accomplish or difficult. ?? __

  automaticlly/game change default setings for CD, DvD, s, play music, photos of nathalie, instal, softvar, play games... I need to know where I can use "NERO 8 esentials" and I use NERO 8 for the whole of what is on the page "automaticlly play"?

  Hello music79,

  Thank you for visiting the Microsoft answers Site.

  You can check the link below for the information of the Nero 8 Windows 7 Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Nero%20Suite&v=Nero&UID=8&l=en&pf=0&PI=4&s=Nero%208&OS=32-bit

  In addition, to set a default program to use when you open a specific file type, please see the link below:

  Change the programs that Windows uses by default

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• OfficeJet Pro 8610: Helps the scanning resolution and economy. BMP

  When scanning resolution is poor, how can I increase it to 300 DPI max... How to save picture under. BMP it currently only gives three options, PDF, OCR, or JPEG

  Well well after literally hours of Googling being impossible to find anything at all on this unit or any other site, a friend suggested that I open the area to set up scanner on Mac itself... and to my amazement after a little digging here, I was able to find the settings for the CIO and the file type save high-resolution BMP images.
  Why hell HP do not display anything in their pages help or on the LCD of the printer to indicate how do, I'm not sure. I'll be happy to send a screenshot to anyone who needs this info.

• Vista don't forget display settings; move the second monitor from top right.

  Windows Vista is often (not always) forgotten my display settings for my external monitor.

  I have a Dell XPS M1530 laptop with a NVIDIA GeForce 8600 M GT graphics card.  The laptop is running Vista Home Premium SP2 with all updates applied.  I have a Samsung LCD monitor mounted on the wall above the laptop screen that I use as a second monitor (driven by the output of the laptop).

  I updated the display settings so that my second screen is located above my main monitor. My problem is that Vista often forget this parameter after the standby or hibernation, and returns the value by default display settings of 'second monitor is to the right of the primary monitor'.  This means that I often walk in the display settings to do the right thing (pardon the pun).

  I've seen other messages to try to use 'View to connect' in the settings of Windows Mobile (win - X).  However this option only supports a second monitor is located on the left or the right of the main screen - not on it.

  Any suggestions before I have eventually give up and drill several holes in the wall to mount the external monitor to the right of the screen of my laptop?

  Thank you.

  In my case out of sleep the primary monitor (laptop) is off (still asleep) while the second monitor is on but the resolution is that the screen of the laptop and he took the position of the main monitor. I push the "fn" + 'f4' key to switch between monitors, laptop monitor turns on but the secondary display stands. Another pressure on the keys cause the laptop monitor to be shared and the secondary monitor is now on, that's what toggle keys do. On the third time that the keys have pushed the two monitors came the resolutions they were Setup.

  Try using the ToggleKeys. On some laptops the 'f' key to toggle is "" f5"key. My 'f4' key has the image of two monitors.

  I hope I could help