Display the color, the color picker dialog box (like colorbox click)

Similar Questions

• After the opening and closing of the color picker dialog box, I get a non-specific error message.

  Anyone seen this before?

  This happens with various PS projects and did not happen before the last update.

  Thank you Heinz.

  Please refer to a similar thread the color picker error: 'Could not complete your request because the program error'

  Let us know if that helps.

  ~ Assani

• HP Pavilion g6-2330dx Notebook: keep displaying the "Windows Installer" dialog box and pressing OK button to restart over and over again

  Hello

  I tried to update my laptop Win8 to Win10, but before that Win 8 must be upgraded to Win8.1 then Win10. Unfortunately, I encountered the problem after you install the free upgrade to WIn10.

  I decided to use the system recovery and the source is from my USB.  (I created the USB key recovery).  The restoration was completed and started making configuration suddenly my laptop just because of the excessive heat caused my laptop stop does not complete the installation of windows 8 and finished to get the dialog box of "Windows Installer".

  I inserted the USB key, but it seems that its not reading. I tried F2 - mode of the system, but it only shows the Bios and other tests not the usual display of F2.  I haven't tried F11 and same thing no chance.

  My question is, how do I make my laptop back to the operating mode as the way to reinstall the entire operating system and HP Recovery Manager or HP configurations.

  Do I need to buy a CD of HP recovery my laptop?

  I have HP reactions appreaciate or someone who is ready to help and assist.

  Thank you in advance.

  Screen of the image below:

  

  Hi there @KierV,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you had initially a question of upgrading Windows 10. After the upgrade, you have tried to restore on Windows 8 (previous version), and now you have issues going back.

  I did some research for you. I'll provide you with some troubleshooting documents that I had found.

  The first document is called a troubleshooting (Windows 8) HP system recovery problems. If this does not work, please follow this document called recover your computer from a USB flash drive. Please follow the troubleshooting steps in this document to see if you can get the USB recovery media you created to operate.

  If the USB key that you created still doesn't work after you troubleshoot, you can either you make on the Order Recovery Media-CD/DVD/USB and drivers HP Pavilion Notebook PC g6-2330dx Page or you can use the following link to create yourself a file number, then give us a call:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  If you want to try to restore Windows 8, Windows 8.1 upgrade and then upgrade to Windows 10 once again, please read this document called upgrade to Windows 10.

  I hope this helps!

  Have a great day!

• I can't find 'save to desktop' in the Save as dialog box to an Excel on Win7

  In fact I do not see how to save any kind of file on my desktop with Win 7 and MS Office 2007 Pro.

  The game, February 3, 2011 15:44:39 + 0000, Maryriver wrote:

  I have not posted in forum excel because this problem occurs in all my MS Office 2007 Pro programs.  When I follow your suggested steps:

  "Open Excel > click on the Office button > Save As > close from the top left, click MORE > see icon on the desktop now? ' > click on the desktop.

  There is that no more save it as only includes orders for the economy in several formats, but the dialog box that opens shows not the desktop as the destination to save in.  The only affected destinations are;  models, Favorites, libraies, residential, computer group, WIN7C and network.  I explored all the and can not find any "desktop."

  Desktop is not listed under Favorites on the left side of the Save as
  dialog box? Simply click on it.

  But note that I strongly recommend against save data files in the
  desktop computer. My recommendation is that you put nothing else that shortcuts on
  the desktop computer. There are two things wrong to put the real files it:

  1. one day probably will remove you a real file, thinking that you were
  just remove a shortcut.

  2. you you cluttering up the desktop with too many files, making it difficult
  to find what you are looking for.

  You have to put your files Excel (and other real data files) in the
  Documents folder. If you have some of these files you want
  access often, put shortcuts to these files on the desktop.

  Ken Blake (MS-MVP)

• Pipette in the curve adjustment dialog box average pixels, so the color balance is watered.

  Hi all.

  When you use the pipette to set the points black and white pixels of an image in the dialog box curve setting, I found that it seems not middle of the neighbouring pixels or provide a way to select a value "monochrome".  Thus, the color balance is still impaired and is thrown way if you happen to choose a noisy pixel (for example).

  I expect that there is an option to set the size of the sampling for the pipette area, but I don't see one.  I have considered making the monochrome image, defining curves, save them as a preset, and then reload the image color and apply the preset (if she does not leave me); but this seems heavy and hokey.  What is the usual procedure to adjust the tone curve of the image without changing its color balance?

  Thanks for any idea.

  When you select an eyedropper in the curves adjustment dialog box, you went to the eyedropper tool.

  You then set the sample in the Options bar.

  In the curves adjustment layer, any pipette also has sample settings in the Options bar.

  

• Use the own user dialog box

  Hello

  I want to use my own user dialog box at startup of the user interface. This dialog gets the user to a database of information and I'm not logging in twice.

  Is it possible, where can I disable the standard dialog box, where I should put my dialog box and what data should I send to TS.

  Using TS3.0 and LV8.2.1.

  schwede greetings

  Schwede-

  If you want to change the user login dialog box when you start TestStand, what you want to do is to change the sequence of LoginLogout in the sequence FrontEndCallbacks.seq file. Before editing, I recommend that you copy the folder \Components\NI\Callbacks\FrontEnd \Components\User\Callbacks in the Directory. Then, modify the files there. You want to replace the steps of connection and disconnection of the sequence of LoginLogout with your own steps that display your own personal dialog box.

  I hope this helps.

• Native of filebrowse using and the cascading Save dialog box

  In my application I need to open file and file save dialog box when a specific button is clicked. I looked at the docs of stunts, but I found that the native options. Tried the native alert dialog, change of filebrowse dialog type. It displays well on Simulator, but could not get any output file that will be used in the Qt code.

  I pass these parameters

  int * num = NULL;

  char * folder [1024];
  dialog_update (alert_dialog);

  to dialog_event_get_filebrowse_filepaths(event,file,num), but it always returns BPS_FAILURE.

  In addition, access_shared is present in the bar-descriptor

  Here is my code:

  //slot function
  void App::fileOpen(){
      //===========================
          dialog_instance_t alert_dialog = 0;
  
          bps_initialize();
  
          dialog_request_events(0);    //0 indicates that all events are requested
  
          if (dialog_create_filebrowse(&alert_dialog) != BPS_SUCCESS) {
                      fprintf(stderr, "Failed to create alert dialog.");
                      return ;
              }
              const char* extensions[] = {"*.*","*.jpg","*.jpeg","*.mp3","*.wav","*.mp4","*.txt","*.doc","*.pdf"};
              int items = 9;
              if(dialog_set_filebrowse_filter(alert_dialog, extensions,items) != BPS_SUCCESS){
                  fprintf(stderr, "Failed to set alert dialog message text.");
                          dialog_destroy(alert_dialog);
                         alert_dialog = 0;
                         return ;
              }
             if( dialog_set_filebrowse_multiselect(alert_dialog,FALSE)!=BPS_SUCCESS){
                 fprintf(stderr, "Failed to set alert dialog message text.");
                              dialog_destroy(alert_dialog);
                             alert_dialog = 0;
                             return ;
             }
  
          if (dialog_show(alert_dialog) != BPS_SUCCESS) {
              fprintf(stderr, "Failed to show alert dialog.");
              dialog_destroy(alert_dialog);
              alert_dialog = 0;
              return ;
          }
  
          int shutdown =0;
          while (!shutdown) {
              bps_event_t *event = NULL;
              bps_get_event(&event, -1);    // -1 means that the function waits
                                            // for an event before returning
  
              if (event) {
                  if (bps_event_get_domain(event) == dialog_get_domain()) {
  
                      int selectedIndex =
                          dialog_event_get_selected_index(event);
                      const char* label =
                          dialog_event_get_selected_label(event);
                      const char* context =
                          dialog_event_get_selected_context(event);
  
                      char **fileArray[]={};
                      int *numFiles = NULL;
                     //
                            if(selectedIndex == 0){
         shutdown = 1;//user press the cancel button on dialog; close the dialog
     }
     else if(selectedIndex == 1){
         if(dialog_event_get_filebrowse_filepaths(event,file,num)!=BPS_SUCCESS){
         fprintf(stderr,"File open fail");
     }
     else{
  

  //debug purposes
         fprintf(stderr,"File array: %d/n",sizeof(file)*1024);
             fprintf(stderr,"Num files: %n",num);
             //fprintf(stderr,"Files int: %d",files);
     }
  
     }
                  }
              }
          }
  
          if (alert_dialog) {
              dialog_destroy(alert_dialog);
          }
          //===========================
  }
  

  Native Subforums have no useful information on this subject. Any help is greatly appreciated

  Hello again, here's the example as promised.

  To use the native filebrowse dialog box, the native code must run in its own thread to prevent the user interface in the Cascades to block. This is achieved by encapsulating all the dialog box code in a class derived from QThread.  The class I wrote is called FileBrowseDialog

  FileBrowseDialog.hpp

  #ifndef FILEBROWSEDIALOG_HPP_
  #define FILEBROWSEDIALOG_HPP_
  
  #include 
  #include 
  #include 
  
  /*
   * The file browse dialog displays a dialog to browse and select
   * files from shared folders on the system.
   */
  class FileBrowseDialog : public QThread
  {
      Q_OBJECT
  
      /*
       * QML property to allow multiple selection
       */
      Q_PROPERTY(bool multiselect READ getMultiSelect WRITE setMultiSelect)
  
      /*
       * QML property to read the selected filenames
       */
      Q_PROPERTY(QVariant filepaths READ getFilePaths)
  
      /*
       * QML property to set or get the file filters. This is an
       * list array variant.
       */
      Q_PROPERTY(QVariant filters READ getFilters WRITE setFilters)
  public:
      /*
       * Ctor and Dtor
       */
      FileBrowseDialog(QObject* parent = 0);
      virtual ~FileBrowseDialog();
  
      /*
       * Exposed to QML to start the run loop which creates and displays the dialog.
       * The dialog is shown until a button is clicked.
       */
      Q_INVOKABLE void show();
  
  public:
      /*
       * Getter for the selected filenames QML property
       */
      QVariant getFilePaths() const;
  
      /*
       * Setter and Getter for the filters QML property
       */
      QVariant getFilters() const;
      void setFilters(QVariant const& value);
  
      /*
       * Getter and Setter for the multiselect QML property
       */
      bool getMultiSelect() const;
      void setMultiSelect(bool value);
  
  signals:
      /*
       * Signal emitted when the OK button has been clicked on the browse dialog
       * The OK button is not enabled unless a file is selected
       */
      void selectionCompleted();
  
      /*
       * Signal emitted when the cancel button has been clicked on the browse dialog
       */
      void selectionCancelled();
  
  protected:
      /*
       * Implements the run loop. Dialog stays open until a button is clicked.
       */
      virtual void run();
  
  protected:
      dialog_instance_t m_dialog;
      bool m_multiSelect;
      QVariantList m_filePaths;
      QVariantList m_filters;
  };
  
  #endif /* FILEBROWSEDIALOG_HPP_ */
  

  FileBrowseDialog.cpp

  #include "FileBrowseDialog.hpp"
  #include 
  #include 
  
  FileBrowseDialog::FileBrowseDialog(QObject* parent)
      : QThread(parent)
      , m_multiSelect(false)
  {
      m_filters.push_back(QString("*.*"));
  }
  
  FileBrowseDialog::~FileBrowseDialog()
  {
  }
  
  void FileBrowseDialog::show()
  {
      if (!isRunning())
      {
          m_filePaths.clear();
          start();
      }
  }
  
  QVariant FileBrowseDialog::getFilePaths() const
  {
      return m_filePaths;
  }
  
  bool FileBrowseDialog::getMultiSelect() const
  {
      return m_multiSelect;
  }
  
  void FileBrowseDialog::setMultiSelect(bool value)
  {
      m_multiSelect = value;
  }
  
  QVariant FileBrowseDialog::getFilters() const
  {
      return m_filters;
  }
  
  void FileBrowseDialog::setFilters(QVariant const& value)
  {
      m_filters = value.toList();
      qDebug() << "filter count: " << m_filters.count();
  }
  
  void FileBrowseDialog::run()
  {
      bps_initialize();
  
      //request all dialog events
      dialog_request_events(0);
      if (dialog_create_filebrowse(&m_dialog) != BPS_SUCCESS)
      {
          qDebug() << "Failed to create file browse dialog.";
          emit selectionCancelled();
          return;
      }
  
      //set the selection filters
      if (m_filters.count() > 0)
      {
          char** ext = (char**)new char[m_filters.count()*sizeof(char*)];
          int i = 0;
          for (QVariantList::iterator it = m_filters.begin(); it != m_filters.end(); ++it, ++i)
          {
              QString filter = it->toString();
              if (!filter.trimmed().isEmpty())
              {
                  int length = (filter.length() + 1) * sizeof(char);
                  ext[i] = new char[length];
                  strncpy(ext[i], filter.toAscii(), length);
              }
          }
          if (dialog_set_filebrowse_filter(m_dialog, (const char**)ext, m_filters.count()) != BPS_SUCCESS)
          {
              qDebug() << "unable to set file browse dialog extensions";
          }
          for (i = 0; i < m_filters.count(); i++)
          {
              delete ext[i];
          }
          delete ext;
      }
  
      if (dialog_show(m_dialog) != BPS_SUCCESS)
      {
          qDebug() << "Failed to show file browse dialog.";
          dialog_destroy(m_dialog);
          m_dialog = 0;
          emit selectionCancelled();
          return;
      }
  
      bool shutdown = false;
      while (!shutdown)
      {
          bps_event_t* event = NULL;
          bps_get_event(&event, -1);    // -1 means that the function waits
          // for an event before returning
  
          if (event)
          {
              if (bps_event_get_domain(event) == dialog_get_domain())
              {
                  //0=ok, 1=cancel
                  int selectedIndex = dialog_event_get_selected_index(event);
  
                  if (selectedIndex == 1)
                  {
                      int count;
                      char** filepaths;
                      if (BPS_SUCCESS == dialog_event_get_filebrowse_filepaths(event, &filepaths, &count))
                      {
                          for (int i = 0; i < count; i++)
                          {
                              qDebug() << "selected file: " << filepaths[i];
                              m_filePaths.push_back(QString(filepaths[i]));
                          }
                          bps_free(filepaths);
                      }
                      emit selectionCompleted();
                  }
                  else
                  {
                      emit selectionCancelled();
                  }
  
                  qDebug() << "Got file browse dialog click";
                  shutdown = true;
              }
          }
      }
  
      if (m_dialog)
      {
          dialog_destroy(m_dialog);
      }
  }
  

  This class derives from QObject (by QThread) which means that it can be used by QML when it exposes properties and signals. The FileBrowseDialog class has 3 properties

  -multiple selection: a Boolean flag indicating if single or multiple selection is allowed

  -filepaths: a read only value that returns the list of files selected

  -Filters: a read/write value is where you can specify one or more filters to file (for example, ".doc", "*.jpg") etc.

  The next part is how you call the FileBrowseDialog through the QML. To do this, we must inform the QML of the FileBrowseDialog page. This is done in the App class via the qmlregistertype code.

  App.cpp

  #include 
  #include 
  #include 
  
  #include "app.hpp"
  #include "FileBrowseDialog.hpp"
  
  using namespace bb::cascades;
  
  App::App()
  {
      qmlRegisterType("Dialog.FileBrowse", 1, 0, "FileBrowseDialog");
      QmlDocument *qml = QmlDocument::create("main.qml");
      qml->setContextProperty("cs", this);
  
      AbstractPane *root = qml->createRootNode();
      Application::setScene(root);
  }
  

  The QML is now ready to be able to use the FileBrowseDialog. The example below is a page complete qml which has a button and a label. When we click on the FileBrowseDialog button is open, and all selected files will appear in the label.

  Main.QML

  import bb.cascades 1.0
  import Dialog.FileBrowse 1.0
  
  Page {
      content: Container {
          Label { id: filebrowseDialogLabel }
          Button {
              text : "File Browse Dialog"
              onClicked: {
                  filebrowseDialog.show();
              }
          }
          attachedObjects: [
              FileBrowseDialog {
                  id: filebrowseDialog
                  multiselect : true
                  filters : ["*.doc","*.jpg","*.txt"]
                  onSelectionCompleted: {
                      if(filebrowseDialog.filepaths.length>0)
                          filebrowseDialogLabel.text = filebrowseDialog.filepaths[0];
                      else
                          filebrowseDialogLabel.text = "no file selected";
                  }
                  onSelectionCancelled: {
                      filebrowseDialogLabel.text = "file browse dialog was cancelled";
                  }
              }
          ]
      }
  }
  

  And it's pretty much just invoke the native dialog file navigation in stunts. Please note save the file would follow a similar model, but I found that this dialog box was not particularly useful because it displays only a simple dialogbox with a text file name entry.

  See you soon

  Swann

• The "Windows features" dialog box is empty in Windows 7

  When I click on turn on or off Windows features in the programs and features Control Panel, the Windows features dialog box is empty, no functionality is displayed. What should I do?

  Thank you buddy, but sfc.exe/scannow not worked and I faced another error! (windows resource protection could not start the repair service).

  Finally, I found the solution:
  (1) If you receive the error "Registry space" low, set the size limit of the registry to "unlimited":

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control

  Key: RegistrySizeLimit

  Type: REG_DWORD

  Value: 0xffffff (4294967295)

  (2) restart

  (3) as administrator, open a command prompt and run "SFC/scannow". The command should complete successfully and when errors have been detected, they should be corrected.

  Follow the steps and good luck!

• customize the sign in dialog box / right live

  Hello

  is the standard sign customation in the still impossible dialog box or you add this service in the new version?

  To change the next screen text fragments:

  

  Thank you

  Thomas

  Hello Ulrich.

  Customization of the sign in dialog box is not currently supported. We are currently working on some additional authentication features that, when released, allows you to provide a URL to display our custom sign in the user interface in a giving web view you full control over the sign in experience. This new feature will also include support for the displaced, including SAML and OAuth2.

  As go us further in the development of this feature, I'll be able to publish the target delivery schedule.

  Kristy

• Bug in the advanced Recordset dialog box?

  I have setup a site using the ASP VBScript server technology. Somehow, in the advanced Recordset dialog box I have the ASP.NET option with the parameters instead of Variables. According to the documentation should not display the settings window when using classic ASP. Its almost like Dreamweaver I'm using ASP.NET.
  
  When I test the retrieved recordset object data are correctly with my access according to the SQL DB. I tried to uninstall Vista Microsoft IIS support ASP.NET. This reduces the options of server technology during the definition of the Web site; but still no change when choosing ASP VBScript or ASP advanced Javascript - the Recordset dialog box still says SETTINGS VARIABLES not? Anyone know what could be the problem?
  
  Help appreciated,
  Mag
  
  System: Vista Business, Dreamweaver CS3

  Osveta wrote:
  > I have setup a site using the ASP VBScript server technology. Somehow in the
  > Advanced Recordset dialog I have the ASP.NET option with the settings instead of
  > Variables. According to the documentation, it should not display settings
  > window when using classic ASP. Its almost like Dreamweaver thinks I'm using
  > ASP.NET.

  The answer will depend on the version of Dreamweaver that you use. The update Dreamweaver 8.0.2 moved to the parameter type of the Recordset changes dialog box in the manner in which the recordset is constructed. The help documentation for DW8.0.2 does not seem to have been updated to reflect this change. You see the old style dialog box, if you go to:
  Help-> using Dreamweaver-> Dynamic Pages do-> define the Sources of dynamic content-> defining a Recordset-> creating a Recordset advanced by writing SQL

  So if you are using Dreamweaver 8.0.2 or later (CS3 is the next version), then you will see the settings in the dialog recordset in ASP, and you know what you are supposed to see.

  --
  Danilo Micen
  | Knowledge stretching every day: http://CommunityMX.com/
  | Adobe Community Expert

• Showing the full path of the file in the Save as dialog box

  I'm a relatively new for MAC OS and I took the habit of intelligent services on Microsoft file manipulation, in particular to the Save as dialog box. Who has a little smart "arrows" and "buttons" allowing you to ask around the system of files easily, but I faced something else in the MAC operating system.

  Finally, I was able to pass on the path of file bar in the Finder (basically, that nice, small bar with the name of folders/sub-sub-sub-folders you can switch to and it shows "where you are both in the file system"), but I don't miss the Save as dialog box. I tried to find it in the settings to turn it on, scoured the internet, talked with experts at Apple, also called the central phone number, but I couldn't learn all solutions to get the bar path of file under tension to the Save as dialog box.

  And believe me, it's very annoying, when you create a file structure when you register under ' week/Tuesday/XY client Documents/work/approvals/journal/2016/August/2nd /' a file and for the recording of the version changed the same file under the same path, but not to not only return to the file a subfolder creation there AB of the customer, I have to click again through the whole lot.

  The arrows 'story' don't help because when I click on the it puts me directly to record under the folder where I have the last recorded the previous file, or help click on the drop-down above, where records are listed because I could never find the subfolder where I want to go back to there.

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  ..., and I don't want to keep a Finder opens just to copy..., on the way to the record, which was the same effort and has been even more professional!

  I would like to just turn this simple file path bar,..., even that which is available in the Finder!

  Any ideas would be appreciated, thanks for sharing your thoughts in advance, Ian

  Imre of Glen Waverley wrote:

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  1 NO.

  2. we are all just users here and have no info about Apple's plans.

  If you do not want to let Apple know your feelings, you can send your comments here.

  http://www.Apple.com/feedback/

• Completely disable the "Untrusted connection" dialog box

  I am a professional developer stuck behind a proxy at work. The behavior of this power of Attorney causes the SSL connection attempts get a certificate signed by my company, not the web site I try to connect to. I have no control over the proxy, so change this behaviour is out of the question.

  I need to use Firefox for a number of things and am generally fine adding exceptions for sites that I want to connect. However, some sites like github.com loading resources many other areas via SSL (CDN, Google Analytics, Gravatar, etc.). For these sites, I try to add exceptions in order to allow the company a signed, cert but I can only add to github.com, not any other sites, so even after adding an exception I'm brought back in the right to the page "this connection is untrusted". No matter how many times I try to grant a waiver, I never really get to github.com.

  Other browsers on my system are administered remotely and seem to be configured to automatically trust signed certs society. I need to know how to manually configure Firefox to always trust these certificates OR never shows me the unreliable connection dialog box and just maybe show red in the address bar when he does not trust the site cert.

  Apparently in OS X, there are at the level of the authorities of certification system. I don't know why it does not use Firefox, but I was able to export the CA company and import it in Firefox. Finally solved my problem.

• How to display the drop-down list box in MS excel by using labview report generation toolkit? pleasepost code block diagram?

  How to display the drop-down list box in MS excel by using labview report generation toolkit? Please post the block diagram of the code so that I can able to generate from the drop-down list box in excel with the menu drop-down...

  Like this. (edition, use the reference forms instead of the reference to the worksheet)

  Ben64

  

• In XP, when you try to open any file, get the "Open with" dialog box

  After a virus infection that I cleaned up, I now have the 'open with' dialog box popping up whenever I want to open a file.  I tried a restore of the system, but to no avail.  What do you suggest to me.  Thank you

  Hello

  Try the methods listed in the section below and check if that helps.
  How to change or choose the program that starts when you double-click a file in Windows XP
  http://support.Microsoft.com/kb/307859

  I hope this helps.

• Can not enter wildcard (*) in the file selection dialog box when opening a file

  It's something I've not seen before. I posted this question in the forum Autodesk AutoCad LT five days ago, but I got no answer at all. Because I'm not sure whether it is a Windows or a problem with Autocad, I thought I'll try to post here, too.

  On one of our AutoCad workstations, when you open a drawing, we cannot enter a wildcard character (*) in the file selection dialog box to help unravel the drawings.

  In other words, say there are 10 versions of a drawing with the number 5008. I should be able to enter the 5008 * and just see these ten designs. On this computer, when I try to type an asterisk (*), I get this error message: invalid character. The following characters are not allowed in file names: \ /: *? "<>

  Now, I know that they are not allowed... but I don't mean to create a file name. I'm just trying to classify them. On our other RTE Autocad workstations, the wildcard character works fine.  What's up with this one? Y at - it a setting or a variable that controls this?

  Thanks - Kevin

  Hello

  ·         The problem occurs with any other application?

  It may be some setting in Auto CAD, which raises the question, and its best you seek help from experts in DAO automatic.

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.