Display the form guide in a flex application using the remote object

Similar Questions

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• Unable to display the remote folder: the remote folder F:/wamp/www / "MYWEBSITENAME" / is not accessible or does not exist.

  In CS4, all of a sudden, I get the error "unable to display the remote folder: the remote folder F:/wamp/www /"MYWEBSITENAME"/ is not accessible or does not exist.»

  I'm in Manage Sites and test the file in the remote folder and it says "Dreamweaver connected to your web service successfully.

  I have not changed anything.  I had this once before a few years ago and just copied on the site of a new name and that fixed it, but it does not for the moment.

  Help.   Any ideas?  Thank you

  When you click the expand button in your files window, whose icon is selected in the upper part?

  

  The middle one is the test server (list of lightning bolt), if you try to download, you will need to switch to the remote server (standard search bullet list icon).

  If you do not have a local server running on a drive of F, and you try to put it on the test server, you will get an error saying: there is no. Is it happening?

  If you do not have a local server running on your F drive, remove the test server info, it is not necessary.

• How to get the remote object mode protect?

  Hi all

  I have a question for a remote object mode protect in drive x. need your help, thank you very much ~

  Background: I have a plugin running on drive x protect mode. Without a strong name, plug-in will load my DLL (manufactured by c#). Then, in this DLL, it will use

  _3rdProxy p (_3rdProxy) Activator.GetObject = (typeof (_3rdProxy), url); for a remote object of the 3rd application (made by c# also). Then I can make communication between my app plug-in and 3rd.

  But I got an error "Access denied", said. Anyone know how to get the remote object in this case? Thank you very much ~

  Since you have a reader integration key, you are advised to use our methods of support for the official Developer.

• ORA-04052: error occurred while the remote object by raising

  Please help I m this error
  
  ORA-00604: an error has occurred at the SQL level 1 recursive
  ORA-04052: error occurred while the remote object by raising
  ORA-01017: name of user and password invalid.
  connection refused ORA-02063: preceding the line of LINK DB

  Tom wrote:
  Please help I m this error
  ORA-01017: name of user and password invalid.
  connection refused ORA-02063: preceding the line of LINK DB

  Well, what part of the name of user and password invalid needs to explain?

  SY.

• Call a html FLEX application, using parameters

  Hi guys,.

  I have this html code:

  "< form ="getTracing"method ="POST"name action ="http://syyzas400/ShipmentInquiry/ShipmentDetails.html"> ".

  QuickTrace

  < input type is "text" name = "TrackNbr" size is "14" tabindex = "1" maxlength = "11" >

  < br >

  Carrier

  < select name = "Carrier" tabindex = "2" style = "background-color: #D8E4FF;" color: black;

  do-family: Arial; make-weight: bold; do-size: 9pt; width = 114 ">

  < option > option 1

  < option > option 2

  < option > Option3

  < / select >

  As you can see, it has an input field ("TrackNbr") and a selection field (the ' carrier'), with three options... The user enters a number of follow-up.

  in the first field and choose one of the three options in the second field and hits < enter >. Now, as you can see on the 'action' box, an element html (part of a FLEX application) is called. The problem is that ('TrackNbr' and 'Carrier') parameters are not passed, and I don't know how to do this.

  This FLEX application accepts the parameters using the technique of URL fragments (because can be called from another FLEX application, too)

  but of course it does not work with the form described above.

  I read on the external Interface class, but everyone speaks to call ActionScript functions, not FLEX applications. Being a beginner in this area.

  I don't know that I'm missing something, but what?

  Any help would be much appreciated, as usual...

  Florin

  could try to use the GET method and parse the URL when loading the application

  var path:String;
  
  var URLpath:String = ExternalInterface.call("window.location.href.toString");
  var PassedData:Array = URLpath.split("?");
  
  var Parameteres:Array = PassedData[1].split("&");
  

• SWF in Flex Application using

  I have a problem on sovereign wealth funds used by the Flex application.
  
  Code: mx:SWFLoader source = "SWF/360.swf" scaleContent = "false" width = "200" height = "100" / > "
  
  360.swf, document, document width: 200 height: 100.
  However, the movieClips in 360swf use about 400 * 200 steps.
  
  Problem: the 360.gr swf file is always displayed in full size(400*200) of SWFLoader, so that it can be displayed by flash player well(200*100).
  
  How the Flex application allows the document width and height to display SWFs?
  
  Appreciate any help.

  Maybe you can try to define maintainAspectRatio = false... Although I don't know if it will work,

  -george

• FLEX application using AS closing

  I use the following code to close the current application using Action Script and JavaScript:

  var urlString:String = ' javascript:window.opener = auto; Self.Close; » ;

  var request: URLRequest = new URLRequest (urlString);

  navigateToURL (request, "_self");

  Then I got the message: SecurityError: Error #2121: security sandbox violation: navigateToURL

  Is there a way to solve the problem or should I use another way to close the application currently As

  Kind regards

  See Nativeapplication.exit())

• My ComboBox does not work if I hardcode the dataProvider, not if the dataProvider of the remote object

  I have a ComboBox where the user can select a category of products to display. The ComboBox control is sitting on a custom component and the ArrayCollection collection that fills created in the same element that displays the list.

  I have two versions of the element containing the ComboBox control.

  Version 1:

  / / Create new variable as ArrayCollection collection tuped

          [Bindable]

  private var categoryList:ArrayCollection;

  / / initData method called on creationComplete

  private function initData():void{ }

  / / set values in the ArrayCollection collection

  categoryList = new ArrayCollection([ )

              "All Categories"

                    , "Appetizers"

              , "Butchery"

              , 'Candy & chocolate'

              , "Desserts"

              , 'Fruit & jam'

              , 'Gifts'

              , 'Grill & barbecue'

              , 'Honey and syrup'

              , 'Kitchen accessories'

              , "Little daviet Childrens Fun Food"

              , 'Denounced & other oils'

              , 'Oives & olive products'

              , « Pasta »

              , "Paste & fish"

              , 'Rice and cereal'

              , 'Sauces'

              , "Seasonings and Condiments"

              , 'Spreads'

              , "Truffles and mushrooms"

              , 'Vegetables'

              , 'Vinegar'

              ]);

  / / make this collection the data provider for catCombo

  catCombo.dataProvider = categoryList.

          }

  Version 2 (the result of a call to a ColdFusion cfc):

  / / Create new variable as ArrayCollection collection tuped

          [Bindable]

  private var categoryList:ArrayCollection;

  private function categoryListHandler(event:ResultEvent):void{ }

  categoryList = event.result as ArrayCollection; collection

  var catObj:Object = new Object();

  catObj.merchantCategory = 'all categories'

  categoryList.addItemAt (catObj, 0);

  catCombo.dataProvider = categoryList.

          }

  Everything else is identical in both versions of the custom component. The ComboBox is created like this:

  " < mx:ComboBox id ="catCombo"rowCount ="16"" "

        styleName = " " glass "

  Exchange = "dispatchFilter (); »

  " labelField ="merchantCategory"" "

        / >

  In both cases, catCombo is filled correctly. But...

  In version 1, when I select a different category, everything works as expected.

  In version 2, when I change the category, said filter "0 selected items" and nothing appears, even if I go back to "all categories". It's as if the filter sees nothing once there is a change in the selection of catCombo.

  Of course, I would prefer Version 2 because the catalog - and its categories - change in the month.

  So gurus, I would really like to start the new year with Version 2 of work, any ideas would be great appreciated. Everyone in the mood?

  Happy new year

  Carlos

  This code populates the combo very well box.

  I do not use a VO, or CFusion if... the thing with VO, I think it is we can do a selectedItem live on it because it is as [object], [object] you need actually to extrapolate this information or make it. toString();

  You have drawn to see what is selected when you select an item in the drop-down list? is this [object], [object]...

  I guess the cheapo to do would be to only capture the drop-down list box in a variable.

  So have the right filter for the variable that will be given, rather than the filter directly from the drop-down list box?

  It is quite difficult to the bug with all the code enough before you, but when you are only provided only a snippet of the code it makes it even harder.

• ORA-04052: error occurred when searching to the top of the remote object REPADMIN. SYS@CEL2. W

  Hello
  on 10 gr 2 on WIN 2003 server:

  C:\>sqlplus repadmin/***@CEL2.WORLD
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Tue Jun 22 09:54:18 2010
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options

  And then:

  CONNECT repadmin/******@CEL1.WORLD
  
  BEGIN
     DBMS_REPCAT.ADD_MASTER_DATABASE (
        gname => 'REPG',
        master => 'CEL2.WORLD',
        use_existing_objects => TRUE,
        copy_rows => FALSE,
        propagation_mode => 'ASYNCHRONOUS');
  END;
  / 
  
  BEGIN
  *
  ERROR at line 1:
  ORA-04052: error occurred when looking up remote object [email protected]
  ORA-00604: error occurred at recursive SQL level 2
  ORA-12545: Connect failed because target host or object does not exist
  ORA-06512: at "SYS.DBMS_REPCAT_UTL", line 4271
  ORA-06512: at "SYS.DBMS_REPCAT_MAS", line 2156
  ORA-06512: at "SYS.DBMS_REPCAT", line 146
  ORA-06512: at line 2

  Thanks for the help.

  connect to the remote database as sys and

  SQL > grant execute on sys. DBMS_REPCAT repadmin;

• Error with the remote object

  Hello

  I have this error when I try to connect using remote object with ColdFusion.

  Unknown AMF type "15".null

  Any ideas?

  Thank you!

  Sorry, I was the bad parameter

  It's time to go to sleep.

  Best,

• Split screen: display the remote mac in fullscreen app?

  I have an iMac 27 "and 13" Macbook Pro. Remote in my iMac, I would work on my library of Photos, but when I do, the larger iMac screen resolution makes tiny on the MBP, even if Photos in full screen on the iMac of distance and the screen sharing session is in mode full-screen.

  Question: Is there a good way to distance in my iMac to my MBP for work on the iMac photo library, as I do now, but have the app Photos seem to be as if I were in native mode display full-screen on the MBP? In other words, can I see an application remotely (Photos) in mode full screen on the MBP?

  Have you tried to turn turn the scale?

  

• Do not display the SVG objects with the effect of filter &lt; feSpecularLighting &gt;

  When I open a file Scalable Vector Graphics (.svg) in Firefox, all objects with filters that contain the < feSpecularLighting > filter primitive, are not displayed at all, and in rare cases, even cause Firefox crashes.

  For example:

  • http://upload.wikimedia.org/Wikipedia/Commons/e/EE/Video_game_health_bar.svg

  It must be rendered like this:

  • http://upload.wikimedia.org/Wikipedia/Commons/thumb/e/EE/Video_game_health_bar.svg/3000px-Video_game_health_bar.svg.PNG

  In order to get the SVG file to render as PNG, you must edit kernelUnitLength of 0.01 to about 1.0 (or delete). Don't know if something might have changed in the way Firefox handles this attribute to cause such a radical difference.

  I should test in a clean profile to see if I get the same result...

  Edit: Same result in a clean profile, i.e. without extensions or changes to the default factory settings.

• To display the deleted objects

  Y at - it a display of v$ or dba to see deleted items.

  user13350835 wrote:
  Y at - it a display of v$ or dba to see deleted items.

  Lol if you have 10g there is this feature called recyclebin.

  concerning

• Cannot display the error to the remote folder.

  After using Dreamweaver CS4 for years, all of a sudden I can't put or get files.  I get an error that says: "cannot display the remote folder"and then he tells me that the file does not exist."

  I can test the site in the sites to manage and it connects fine.  I can download files very well in other FTP applications and a friend who also works on the Web site is able to continue to use Dreamweaver without problems.  Nothing has changed.  But I can't understand this on my Dreamweavr on my PC.  Any ideas?

  Have you tried to create a new site definition?

  Clear Cache / personal Configuration file?

  Reset preferences?

  Nancy O.