Display the header of a file in the report information

Similar Questions

• How to hide the information PDF/A sign and display the signature information panel? (plugin)

  Hello

  When you open a PDF/A compliant document and also has a signature digital then PDF/a information panel is always displayed with the text:

  You have opened the file conforms to the PDF/A standard and was opened in read-only to prevent the change.

  Instead, I would like that my plugin to display the Panel of usual signature information:

  Signed and all signatures are valid.

  It is possible to get this behavior by setting preferences-> Documents-> PDF/A-> Mode of display/a 'never '.

  What I would do is to programmatically set the information bar to display the status of the signature (for documents that are checked by my plugin, probably inside the dsGetValidState). For all other documents open it in PDF/A, by default, that's fine.

  No idea how to do the plugin with the SDK from the inside?

  There is no control over the 'Message of Document bar' from a plugin.

  Mode display PDF/A disable is a REALLY BAD IDEA!

• Displaying the right information to get a BSOD error help

  When your computer crashes and displays a blue screen there are often very valuable information about the photo that will allow users to help you solve your problem and to know what is causing this blue screen appears.

  Looking at the image at the end of the article you will see two sections highlighted, you will always want to post this information in your forum thread when looking for help she will be the most critical part of troubleshooting. The top tells us what's happening and said background where it goes to. We have just responded to two of the most important issues when you try to solve a problem.

  What's not?

  Where is the problem isolated to?

  Most of the text is quite annoying, but if that's important to you then it may be important for us. We have all seen what looks like a BSOD, but we do not know what your BSOD.

  There are more important questions that you can answer that will help your troubleshoot BSOD error message.

  1. What is your system brand and model? We know that you have an HP computer, but there are tons of computers. We need to know your specific model to ensure you use the appropriate drivers and we recommend the proper drivers.
  2. What is your version of Windows and the Service pack?
  3. Are you running a 64 bit or 32 bit OS?
  4. What is your Internet browser and version?
  5. Does your system use IDE or SATA disk drives?
  6. What virus protection software and current malicious software do you use? Is up to date?
  7. The issue occurred after an interruption of the power supply as an abnormal termination or power failure?
  8. What has changed recently?
  9. Does this happen often you can effectively reproduce the problem? If you can easily reproduce what steps can you take to reproduce the problem.

  Here is a list of the most common mistakes of the BSOD you can see

  • Stop 0 x 00000003 UNSYNCHRONIZED_ACCESS
  • Stop 0x0000000A IRQL_NOT_LESS_OR_EQUAL
  • Stop 0x0000001E KMODE_EXCEPTION_NOT_HANDLED
  • Stop 0 x 00000023 FAT_FILE_SYSTEM
  • Stop 0 x 00000024 NTFS_FILE_SYSTEM
  • Stop 0x0000002E DATA_BUS_ERROR
  • Stop 0x0000003F NO_MORE_SYSTEM_PTES
  • Stop 0 x 00000044 MULTIPLE_IRP_COMPLETE_REQUESTS
  • Stop 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA
  • Stop 0x0000006B PROCESS1_INITIALIZATION_FAILED
  • Stop 0 x 00000073 CONFIG_LIST_FAILED
  • Stop 0 x 00000074 BAD_SYSTEM_CONFIG_INFO
  • Stop 0 x 00000076 PROCESS_HAS_LOCKED_PAGES
  • Stop 0 x 00000077 KERNEL_STACK_INPAGE_ERROR
  • Stop 0 × 00000079 MISMATCHED_HAL
  • Stop 0x0000007A KERNEL_DATA_INPAGE_ERROR
  • STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE
  • Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  • Stop 0x0000007F UNEXPECTED_KERNEL_MODE_TRAP
  • Stop 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED
  • Stop 0x0000009C MACHINE_CHECK_EXCEPTION
  • STOP 0x0000009F DRIVER_POWER_STATE_FAILURE
  • Stop 0x000000BE ATTEMPTED_WRITE_TO_READONLY_MEMORY
  • Stop 0x000000C2 BAD_POOL_CALLER
  • Stop DRIVER_VERIFIER_DETECTED_VIOLATION 0x000000C4
  • Stop 0x000000CA PNP_DETECTED_FATAL_ERROR
  • Stop 0x000000CB DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
  • Stop 0x000000CE DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
  • STOP 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL
  • Stop 0x000000D5 DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
  • Stop 0x000000D8 DRIVER_USED_EXCESSIVE_PTES
  • Stop 0x000000DA SYSTEM_PTE_MISUSE
  • STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
  • Stop 0x000000ED UNMOUNTABLE_BOOT_VOLUME
  • Stop 0x000000F2 HARDWARE_INTERRUPT_STORM
  • Stop 0x000000F4 CRITICAL_OBJECT_TERMINATION
  • Stop 0x000000FC ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
  • STOP 0x000000FE BUGCODE_USB_DRIVER
  • Stop 0xC0000218 UNKNOWN_HARD_ERROR
  • STOP 0xC000021A STATUS_SYSTEM_PROCESS_TERMINATED
  • Stop 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
  • STOP 0xC0000244 STATUS_AUDIT_FAILED

  

  This thread is purely an informative thread. If you are experiencing a BSOD error please create a new thread ensure you provide information that questions on this thread.

  While many BSOD errors may be troubleshooting-made the same way, there is an amount of many of them and they should be troubleshoot-carried out on their own.

  If you have anything else you want to add or general BSOD issues then you can post them here, but if you ask about anything that requires real troubleshooting it should be in its own thread.

• Display the song information

  Greetings,

  When I play certain audio CD, they display the name of the artist/album/song. For example, a CD that I bought recently shows information on the song when I play it in my car. How can I write this information on an audio CD when I burn a disc?

  Thank you

  Shane.

  Windows Media Player 12.0.7601.17514

  Engraving of artist and title on an audio CD information is a device called a CD-Text. WMP is not supported with built-in support for CD-text, to create a CD that contains, you need to use another burning software, like Nero/Roxio (commercial) software, or CDBurnerXP / Burrrn (freeware).

  Once you have burned a CD with CD-Text, you can install the WMPCDText plugin for WMP to read CD-text.

• Why is the bar blackened and address grayed out instead of display the url information?

  -Recently installed Linux Mint 17.1 "Rebecca."
  -Delivery address does not appear when the text typed in the address bar
  -Green, grey and black colors appear instead, as if blocking the view information

  Could you check this thread started by another user of Linux and see if workaround it helps you on your system:

  How can I stop firefox ffrom blocking URLS

  There is a workaround:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste gfx and make a pause so that the list is filtered

  (3) double-click the preference gfx.xrender.enabled to change its value from true to false

  It takes effect after the next time you exit and restart Firefox.

  It works for you?

• Windows 8 order summary still displays the log information is incorrect

  I bought Windows 8 through the upgrade wizard and I wanted to check what my Windows Me DVD will be shipped. So I went to the Windows order summary page to see when it will be delivered, but it still shows the log information is incorrect. I checked all the details and and have repeated this process several times no nut no chance. Does anyone have a solution to this?

  Hello

  Thanks for posting in the Microsoft Community.

  I suggest you to contact the Microsoft store since you can not connect to command of Windows 8 Preview.

  See the link.

  http://www.microsoftstore.com/store/msstore/DisplayHomePage

• Left to right alingment problem when displaying the report in Arabic

  Hello
  
  Am now work in Arabic reports, everything works fine, but the problem is with the alignment only.
  
  In the preparation of the report (generator of reports), alignment is from right to left, but in pdf format, change the alignment from left to right.
  
  I use Oracle Report Builder 10.1.2.0.2 and reports running on the Oracle 10.1.2.0.2 application server
  
  Can anyone help me this.
  
  Kind regards
  Iftikhar

  Installed the Oracle Forms and reports services 10g / application server Oracle 10 g (10.1.2.0.2) with the Arabic language and you have the problem solved.

• HP 1200 printer does not print check when it is connected to the Jetdirect card but will display the report

  HP 1200 printer is plugged in with the USB cord to HP Jetdirect box and it gets IP from there.   Printer is set for the server with the ip 192.168.10.7 of print

  Print server is 192.168.10.12.    Backend server account try to print to a control with the 1200 HP and output hit the print queue (we suspended the print queue)

  and then when we release printing printing disappears as his will be printed but no keys comes out.      As a test, we ran a simple report on the same printer who had no special formatting and it printed fine.

  Captured audit printing to a file and then realized that file to the other printer, HP Officejet K80, which was not intended for printing and it prints properly which confirms that the control is built in formatting standard code PCL5e.   What is unexplained, that's why the cheque will not be printed on the HP 1200.    Have already had experiences where the USB slave out of Windows workstatoins printers will not print documents at all the other stations of the network.   The print will be struck by the print queue and disappear, but the printer never lights.   In this case, it will work for printing unformated but won't work for the formatted print PCL.   This could be Windows networking printers or simply a problem with the HP 1200 and forum for both checking.

  Hello

  1. are you able to print Word documents, Excel and PDF?

  2 are computers and printers connected to a domain network?

  I suggest you to connect the printer directly to the computer and check if it helps.

  Please visit the following links and check.

  Printer network problems (applies to Windows 7 as well)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• Automatically display the user information

  So I'm working on this website of the school project, it's a pretty simple site in Dreamweaver. I created a log in the site and I use MM_Username to show the connected to the user. How can I go to show information of the user (name, first name, telephone number etc.) on a wall that they display all sorts of different things in (to sell, animals lost, happening, etc.

  Thanks in advance!

  With queries SQL table names & field desired database.

  I hope that you do not use the obsolete Server & database for this panels.

  Nancy O.

• devices and printers does not display the correct information of device or the icon

  I click on devices and printers and of course my devices and printers all appear, however, the device appears to my computer shows in the information window which is a Tablet instead of a desktop PC, the model number is incorrect and also the icon as well. How can I fix this.

  Same question here.

  Solved with this microsoft hotfix to form
  http://support.Microsoft.com/kb/2403006
  It turns into the right device and realistic icon

• crsctl does not display the correct information

  Here is what happened.

  There is a test at home for learning system. Oracle RAC 11.2

  It was working fine.

  I had a group of data called ASM DATA

  I added a new data group to asm called DATA1 and then I dropped the DATA1

  Now, when I restart the machine... the database does not start automatically... when I go to sqlplus and use the order... starting the database starts

  However after starting, if I use the command

  crsctl res stat - you

  I expect to see the State of the ora.rac.db online

  I see the State of the ora.rac.db offline

  I heard that after the removal of a group of data we do maintenance using SRVCTL command

  I checked on Metalink, but was unable to find any document.

  Please help.

  Here's what I did to solve the problem

  . / stat crsctl res ora.rac.db Pei | grep DEPENDS

  START_DEPENDENCIES = hard (ora. DATA.dg, ora. Weak(type:ora.listener.type,global:type:ora.scan_listener.type,uniform:ora.ons,uniform:ora.eons) of Data1.DG)

  pullup (ora. DATA.dg)

  Hard = STOP_DEPENDENCIES (intermediate:ora.asm, stop: ora.) DATA.dg, shutdown:ora. Data1.DG)

  The above was incorrect because the disk DATA1 group fell however crsctl registry was not updated.

  I tried the below command but it didn't work

  . / crsctl change res ora.rac.db - attr ' START_DEPENDENCIES =' hard (ora. " DATA.dg)

  Weak(type:ora.listener.type,global:type:ora.scan_listener.type,Uniform:ora.ons,Uniform:ora.) Eons)

  pullup (ora. DATA.dg) "" "

  then I tried the command above with the indicator f and it worked

  Now, I gave the next command

  . / crsctl change res ora.rac.db - attr "STOP_DEPENDENCIES =" tough (intermediate:ora.asm, stop: ora.) "." DATA.dg)' '-f '.

  then I stopped the cluster and rebooted the machine

  but the database did not come to the top...

  so I did a little research and gave to the next command

  . / crsctl change the resource ora.rac.db - attr AUTO_START = always

  ... Stop cluster and restart

  BinGO... the issue is now resolved

• Is it possible to display the tool information in the Info pane?

  It is a feature of Photoshop and I was wondering if there is an equivalent InDesign. In Photoshop, whenever a tool is selected, the details pane contains information on this subject. For example, if you select crop, the details pane says "draw a rectangular selection or move the selection outline." Hold SHIFT, CTRL, and ALT for more OPTIONS. "If you hold SHIFT with selected cropping, the description becomes"constrain square selection or add to the existing selection. »

  It is VERY convenient. Is there something similar in InDesign? I don't see this information in the details pane. Sometimes, I watch the cursor changes in InDesign (for example, a small white triangle is added to the text tool cursor when you hover over the column guide) and I'm just at a loss to understand what this means in terms of functionality of the tool.

  Thank you

  Silvio

  I don't know - I bought a kit of party of taco for $20.

  However, I think that the guys missed something

  In CS5, you can go to the window > utilities and select tool tips

  You will get a panel upward and it will tell you the modifier keys associated with it regardless of the tool that you have selected

  Now to get some tacos

• Cannot display the channel information...

  For some reason any I'm more able to view channel information in the Layer palette. The channel tab is gone. What Miss me?

  You are missing channels Panel... go to the top in the Windows menu, and then select the Panel layers. You must have closed it so now you must reopen.

• iPhone messages do not display the coordinates on the lockscreen

  Ive had this problem fo has for a long time now and not been able to find a solution.

  When I receive a message of some people, the phone does not display the contact information for the message, I just get the number. Its a slightly annoying bug.

  Ive tried the backup phone, wiping and then restore from the backup, but the problem still the problem occurs.

  I tried wiping the phone and from scratch, synchronization with icloud for all my contact information, etc.

  He worked and solved the problem, except that now I don't have one of my old text messages (what I really want to keep as there's several years of conversations evidence it.)

  I found a free software called iBackupbot which allows you to restore a backup file messages and copy them to another and you can then restore your phone to this new modified backup.

  It worked. I now have my restored messages (except the attachments are missing, but I can live with that).

  However, I now have a new problem, when I receive a new message that they are appearing in my list of message completely out of use and not at the top of the list of messages. There seems to be no logic to it, they just pop up as if they were a few months old even if theyre unread.

  I'd really like to find a solution to this problem. I have an Iphone 6 and all the latest software update.

  Thank you

  Jonathan

  Hello

  your problem is a new read does not list according to the order of arrival of messages?

• Display the date and time on the taskbar

  I just upgraded to Vista Premium 64 for Windows 7 Professional as well as the date and the time in the taskbar display became static at 07:25 08/01/2010. When I turn the date and time of the show, but I can't find a way to display the correct information on the taskbar.

  Hi geoffinbaja,

  It seems that some application or service is in conflict. To narrow down on the boot of the issue of the computer toboot and check if the issue still persists. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.