Cannot display the channel information...

Similar Questions

• Error - because of unidentified problem, Windows cannot display the firewall settings

  Original title: Firewall Windows are not accessible to stop?

  Recently installed MSE.  Now, I can't launch Samsung Allshare to view files on the Samsung TV.  Firewall Windows is not accessible to stop temporarily so that Allshare can run.  All that is shown is "Because of problem not identified, Windows cannot display the firewall settings."  It seems that MSE has hidden and I can't determine how to communicate with them without going through the process of uninstalling and re-installing.

  Hello

  1 Windows operating system you are using?

  2. when exactly you get the error message?

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  If the problem is not resolved, please provide more information to help you best.

• When my friend l. a automatic updates for Windows Vista, it can no longer browse the web, well connected (as evidenced by Skype and diagnostics) the message "internet explore cannot display the page" coming up. Is there a way to fix this?

  Explore cannot display the page
  Vista updates
  Restart

  Hello

  Welcome to Microsoft Windows Vista Forums.

  I suggest you follow these steps:

  Method 1: See if you can view another Web page

  To do this, follow these steps:

  Start Internet Explorer.

  In the top of the browser address bar, enter one of the following addresses:

  http://www.Microsoft.com

  http://www.MSN.com

  http://support.Microsoft.com

  If you do not receive a similar error message after entering one of these addresses in the address bar, contact the owner of the Web site where you see the problem. The website is maybe temporarily unavailable or other problems.
   
  If you receive the same error message, go to the next method.

  Method 2: Run the Network Diagnostics tool in Internet Explorer

  To do this, follow these steps:

  Start Internet Explorer, and then try to access the Web page that displays the error message.

  On the page that displays an Internet Explorer error message, click diagnose connection problems . The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  He was unable to find a problem.

  It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Note Users of Internet Explorer 6, click on detect network settings

  Click IP address , and note the IP address. You may have to it for future troubleshooting.

  Follow the steps in the Network Diagnostics tool to fix any connection problems.

  Start Internet Explorer.

  If you receive the same error message, go to the next method.

  Method 3: Use the delete browsing history

  If resetting the modem or the router has not resolved the problem, delete your browsing history might help. Follow these steps to delete your temporary Internet files, history and form data:

  Internet Explore 7

  Start Internet Explorer.

  On the Tools menu, click delete browsing history .

  Select the check box next to Temporary Internet files .

  Select the check box next to the history .

  Select the check box next to form data .

  Select the check box next to Cookies .

  At the bottom of the window, click delete .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  Internet Explorer 6

  Start Internet Explorer.

  On the Tools menu, click Internet Options .

  In the Temporary Internet files section, click delete files and then click to select the text box delete all offline content , and then click OK .

  In the history section, click clear history , and then click Yes .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  If you receive the same error message, go to the next method.

  Method 4: Use the Internet Explorer (No Add-ons) mode

  To do this, click Start , point to programs , point to Accessories , point to System Tools and then click Internet Explorer (No Add-ons) .

  Note The Internet Explorer (No Add-ons) mode is only available for Internet Explorer 7 and Internet Explorer 8.

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  Click Tools and then click Internet Options .

  Click on the programs tab, and then click Manage Add-ons .

  Click an add-on in the name list, and then click disable .

  Repeat step 3 until you identify the add-on that is causing the problem.

  If the methods in the "Resolution" section General did not resolve your issue, you can try to use the methods in the "Advanced Troubleshooting" section If you are not comfortable with advanced troubleshooting, you can ask for help or contact support. For information about how to contact support, please visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?PRID=12357

  For more information follow the link below:

  http://support.Microsoft.com/kb/956196

  Hope this information is helpful

  Suresh G

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP update error: 0x8024D001, the site has encountered a problem and cannot display the page you are trying to view.

  Original title: Windows XP ~ Windows Update problem.
   
  During three days of solid, and I slept then work, sleep and then working to solve a problem I have with the functionality of Windows XP Windows Update - this is the error message I get constantly

  [Error number: 0x8024D001]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  I installed a new copy of Windows XP on a hard disk nine, installed Service Pack 1, Service Pack 2 and Service Pack 3, installed Internet Explorer 8 installed .NET Framework 2.0 as Microsoft requested, modified popup settings to allow Windows Update page to be free to scan my system for updates, etc... and I even enabled all Active X permissions BUT I still can't Windows Update to allow me to download all updates, patches, etc... Windows Update has generally

  I also turned on automatic updates requirement also BUT no dice - I can't just not update Windows to activate and start as normal, no matter how many times I format the drive and do a fresh install.

  I had to get a new drive hard as my old crashed.

  Now, I have to install Windows XP again but I noticed how old, easy to update somehow has been paralyzed.

  It's as IF Microsoft is crippling of Windows Update to start simple as pie, then now we users HAVE to jump through hoops to get our operating system Windows XP set to day and repeatedly queries Microsoft asks us or install 'FIX IT' service does not work and it is impossible to reach by phone about Microsoft , and the live online help runs into errors when it is installed, so I have to hit the Internet Forum here for advice.

  How, in words simple Windows XP allow Windows Update to run the scan, to download and install the process what it is supposed to do?

  What exactly is missing to allow the screen to show the green bar and scan the notificiation there have updates available?

  What I am doing wrong?

  I really hate to say this, BUT I'm literally at the edge of tears.

  Help!

  Is there a maintenance program master as an "all-in-One rollup patch" that will search the lack of programs, applications, and settings of Windows XP and makes a one-way relay to set everything right and ensure that the programs needed to make Windows Update work are knitted in Windows XP, including all programs missing subprogrammes and to settings then check their self errors or incorrect version but it provides goes off to FIND the RIGHT version of What is needed?

  Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be found in the downloaded Windows Update but rather is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You need 3 things to WU work.

  WindowsXP-KB892130-ENU - x 86 .exe

  KB892130

  Windows Genuine Advantage Validation v1.9.42.0

  WindowsXP-KB898461x86 - ENU.exe

  KB898461

  Installs a permanent copy of the Package for Windows Installer

  And and unofficial WUA.

  He's right on obsolete dll of WUA that MS is not updated once sometimes for some unknown reason... even the WU Fix there don't solve it. I ran a few tests in the fall and virtual machine on the same issue yesterday. You must install the unofficial Windows UPDATE agent.
  Windows Update Agent below... MS last isn't the last. Boo Ms.
  Download WindowsUpdateAgent7.6.7600.256 - 257.zip to your desktop (MS does not have the latest version of Windows Update Agent. Only 7.4.7600.243 so make us with this).

  Unzip it, go to the folder and double-click RunMe - MakeInstallWindowsUpdateAgent.bat.

  It will download, MS, the files needed to create the Windows Update Agent 7.6.7600.256/257 and then install it. The files that it contains are 100% Microsoft. He uses just a few third-party tools to make it.

  You will be left with the installer, WindowsUpdateAgent7.6.7600.256 - 257.exe. Keep or delete. Your choice.

  Analysis antivirus for WindowsUpdateAgent7.6.7600.256 - 257.zip

  Information for network administrators about how to obtain the latest Windows Update Agent

  Taken from the newsletter above...
  View
  There is no stand-alone installer for the latest version of the Windows Update Agent (7.6.7600.256)

  EDIT: I forgot to mention. It took 1 hour before the scan finished for me. A guy that I was helping on another forum just let WU scan of the day to the next. When he awoke, the scan had the results. So please be patient.

  "Or better yet a disc Compilation of master i.e. Final Service Pack 4.0 that contains all fixes known on DVD that would be in the downloaded Windows Update, but instead is purchased for $10.00 that contains each hotfix and update known for Windows XP so that we can manually update Windows XP on the side of the user of the Internet without having to go on the internet?

  You can create a CD to date and does not deal with all the hassles during the fresh installation. You need nLite and my script of the UDC. You will only need SP3 when "slipstreaming". No SP1 or SP2.
  

• I am trying to updat ewindows but keep getting the website has encountered a problem and cannot display the page you are trying to view.

  IT also included [error number: 0x800704DD]

  Hi Raerenee,
  

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, that you can not install Windows Update and the error message 'the site has encountered a problem and cannot display the page you are trying to view, 0x800704DD ".

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  1. What is the item numbers Knowledge Base updates failing?

  2. did you of recent changes on the computer before this problem?

  See section B in the following link and follow the instructions.

  Error message when you use the Windows Update Web site, Windows Server Update Services or Microsoft Update Web site to install updates: 0x800704DD

  http://support.Microsoft.com/kb/968001/en-us

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.

• Windows Update has encountered an error and cannot display the requested...

  I tried Windows Update and got the answer "Windows Update has encountered an error and cannot display the request... »

  Hello

  (1) what is the description which are impossible to install updates?

  I suggest to follow the steps provided and check if it helps.

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update: http://support.microsoft.com/kb/883614

  Hope this information is useful.

• The website has encountered a problem and cannot display the page while you try to run Windows update and get error code 0 x 80240036

  I can't update, repeat me the website has encountered a problem and cannot display the page. I need to update to Windows XP Service Pack 3. The error code is 0 x 80240036

  Original title: does not refresh

  Hello

  1 did you changes to the computer before the show?

  2. who is the antivirus installed on the computer program?

  Method 1:

  I suggest you run the FIXIT from the link below and.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Perform the steps described in the article:

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 3:

  If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  322756 (http://support.microsoft.com/kb/322756/( )

  I hope this helps.

• Not able to find new updates error the site has encountered a problem and cannot display the page you are trying to view

  Original title: get errors on Windows Update after installation of W2K3 SP1 (Web Edition)

  When I try to use the Windows Update site, it gives the following error:

  "The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "

  It is immediately after installing W2K3 Server Web Edition SP1 (it was the last version that I could find on MSDN Web publishing)

  This version is still supported by WU?  Pointers to get this working would be appreciated.

  -Thanks!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/winservergen/threads

  Hope this information is useful.

• "An undentified problem, windows cannot display the firewall settings" during a turn on the firewall.

  Original title:

  Windows firewall error desabaled

  I have windows xp - help mechanic iolo - my firewall is deactivated automatically - when I click on activate up to a mistake pop [there was a firewall of windows activation error] and then I click on the top of the pop - windows firewall - Open button error [due to an undentified problem, windows cannot display the firewall settings].

  my firewall won't come to help me.

  Hello
  1. You did changes to the computer before the show?
  2. What service pack is installed on the computer?
  Method 1:
  You can run the fixit from following link and check the issue:
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us
  Method 2:
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up the registry, see the link:

  Back up the registry

  http://support.Microsoft.com/kb/322756

  See the article and check if that helps:

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074
  
  

  Let us know if it helps!

• Error message "the website has encountered a problem and cannot display the page you are trying to view" when trying to install updates in the Windows XP computer.

  Original title: update problem.

  Cannot open microsoft live mail, are unable to update, this message popsup 'site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem"what is the solution

  Hi AbelGomes,

  1. What is the number of KB updates, that you can not install?

  2 did you change on your computer before this problem?

  For the issue of the update of Windows, you can follow this link:

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update.

  Due to Windows Live Mail, you can ask your question in this link:

  http://answers.Microsoft.com/en-us/windowslive/Forum/email

  Hope the helps of information.

• Cannot display the page XML cannot display the input XML using the stylesheet XSL, how to fix?

  How can I fix this error code:

  The XML page cannot be displayed

  Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.

  System error:-2146697211. Error during processing of resources "file:///C:/Documents and Settings/a/desktop/SMART.xslt.

  The operating system is Windows XP Home Edition.  I use browsers IE 8, Safari and Mozilla Firefox.

  I'd never see this error until I installed HDDScan (http://hddscan.com/), a diagnostic utility, to check my hard drive.   The test is a S.M.A.R.T. analysis and produces this error message when you use this software.
  A web site indicates that installing Microsoft. NET Framework can solve this problem.  I already have this class in Add Remove Programs: Microsoft .NET Framework 1.1, Microsoft .NET Framework 2.0 Service Pack 2, Microsoft. NET Framework 3.0 Service Pack 2, Microsoft .NET Framework 3.5 SP1, Microsoft. NET Framework 4 Client Profile.
  Is the problem, a missing software program or a corrupted file?  What is Microsoft. NET Framework?  I use selective with most of the disabled items in the services (except hide all Microsoft) and start more disabled under Startup.  Is there something that needs to be checked to activate a service or start to correct this error message?
  How to solve system 2146697211 errors: cannot display page XML cannot display the XML input using the XSL stylesheet?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. Please post your question in the MSDN forum. You can follow the link for your question.

  http://social.msdn.Microsoft.com/forums/en-us/iewebdevelopment/threads

  Hope the helps of information.

• I click 'Update Express' and get [error number: 0 x 80070424] the website has encountered a problem and cannot display the page you are trying to view

  My laptop using Windows XP. I regularly update Windows, once a month. However, when I try to update Windows now, I get looks like this: "[error number: 0 x 80070424] the website has encountered a problem and cannot display the page you are trying to view" I

  Hi LarrySpessert,

  You did it of any material changes or software on the computer before this problem?

  This problem occurs if a service that is required for Windows Update or Microsoft Update is not registered.

  You can follow this link & check if the problem persists.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424

  Hope the helps of information.
  Please post back and we do know.

• Fix that it says cannot display the XML page

  & Impossible view XML using XSL stylesheet & safety input parameters do not allow execution of scriptcode with stylesheet.how can I fix?

  Hello

  ·         Who solve this are you referring to and why do you run the hotfix on the system?

  ·         Outside this Web site you are able to view websites without any problems?

  ·         What browser are you using and what version?

  The error means that web browser is unable to display information from a database file (XML) using the rules defined for the display of information (XSL). Rules XSL on the site you access may be unavailable, corrupted, or currently modified and made available later.

  If it is not then your site, I suggest to try after a while and check if you are able to view the Web site. If this is your site then, I suggest you check the code you have created and then try to view the Web site.

  If you use internet explore, then I suggest you to reset Internet explorer and see if the problem is resolved. Follow the steps mentioned in the article below.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  I suggest you return the item mentioned below.

  Error message "Cannot display the Page XML" when you open an XML file as an attachment in an e-mail message

  http://support.Microsoft.com/kb/303487

• Cannot display the trust policy custom created for attestation the attestation procedure level

  Cannot display the trust policy custom created for attestation the attestation procedure level

  Find the file updated for more information.

  Hi Pradeep and Fatih,

  This is no bug. I can only imagine without detailed information about the procedure of custom clearance and approval workflow custom.

  But each attestation procedure has an assigned table that defines what data will be documented, for example UNSAccountInUNSGroup. An Identity Manager can only assign strategies of the attestation procedure where each step of the approval workflow contains an approval procedure where the picture of the Attestation procedure is in the list of assigned to this approval process approval. (See screenshot) Verify that approval in your approval workflow steps are aligned to this requirement.

  

• RV120W ROUTER/firewall "cannot display the webpage".

  I have a small LAN using a T1 of One Communications line.  Static IP address.

  30 workstations.  Windows 2003 DHCP server.

  Installed new RV-120W firewall router last week replacing an old unit of Netgear.

  Configure VPN tunnel on the unit, have remote access for about 10 users.

  This part works well.  A little slow, but acceptable.

  My question: is internet connectivity on internal LAN in and out.  She's very agitated.

  Upload and download speed has been consistent (~2.5M/sec)

  External Pings see the very minimal loss.

  Users have seem intermittent loss of web streams and corrupt downloads.  web activity 90% is ok, but we continue then getting "cannot display the webpage error."

  NSLOOKUP displays the DNS, but occasssionally "TIMEOUT" occurs.

  I got the provider perform loopback tests and replace WIC on CISCO 1841 router T1, but I still see the behavior.

  I see by reading other forms, that it is an ongoing problem with the routers of RV.

  My settings...

  Public static IP / DNS on the router.

  Reverses the MTU to 1500.  I have adjusted downwards by increment to 1350.

  Windows Server 2003 has RV120W address as the router / gateway.

  T1 to CISCO 1841 ROUTER... to CISCO RV120W... to LAN CISCO SLM248G interrrupteurs (2).

  I do not configure all redirects the port.

  I continue the line tests on my end, but as I said this problem was not existing with Netgear unit.

  Please indicate any change of setting / suggestions.

  Hi Jason et al...

  In my view, the technician are now experiencing a UDP on the Rv120W question.

  The internal discussions on the issue of R & D and development seems to be;

  1. default on RV120W a UDP Flood attack control that limit 25 UDP by customer connections in one case there, IE to a particular instance of time a PC behind the router can establish only 25 UDP Transactions, if we exceed router drops packets UDP.

  2. we have a script that sends dns queries to search at a very high pace that the router deletes the entries in the UDP, in this way, that we accumulate the UDP entry in the router table (IE 25 entries)

  3. once 25 limit is reached, we are unable to resolve DNS queries, in addition to using the script or by using the browser.

  4. in real-world scenarios it could be a PC behind the router and open a website where all the elements on the Web page are related to the different website, if you open this type of Web site, it may have links to over 25 different site and clog the table routers UDP for the PC and the user may not able to solve queries DNS additional and impossible of browse all new Web sites. This inability to browse happens until the UDP entries on the router time dead and are deleted.

  5. this limit of 25 is because of the feature called raw block UDP on the router that is enabled by default.

  6. once we disable the block UDP Flood, router does not check 25 connections limit UDP and dns resolution is continuous, without interruption.

  This is a customers in the area could be to see breaks in the DNS resolutions and browse site failed.

  Some customers talked explicitly about DNS failures.

  Jason I see that you have placed a service call, so I hope that CCORAL who posted August 15 should be helping you.

  So people, if the technician finds the problem not a hardware issue requiring an RMA, the technician will intensify the call for our people of level 2 in the Irvine case, probably CCORAL.  You will get a help to solve this problem.

  The small business support center, should be aware of the problem. Please do not hesitate to show them this announcement, I am ready to discuss with them to get things moving.

  Yet once, if you have not already done, please contact the HWC and place a request for service and keep a copy of this number they give you as a reference (you can need). My apologies for the inconvenience that you all had.

  concerning

  Dave Hornstein

  Small businesses, channel system engineer

  Cisco - Research Triangle Park.  U.S..

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html