Display the song information

Similar Questions

• The song information is not transmitted via bluetooth

  Hi forum,

  one of you may be new information about my problem mentioned above. Listen to music in my car via BT the song information are not displayed! I tried an another music app namely NexMusic the same problem.

  On my way to work, I've tested my 'old' GV + with different ROMA (all based on KK 4.4.4) and music Apps and all gave the right information. So there must be something wrong with the implementation of BT... In the XDA forum, there is also a user reported the same problem. (link)

  I hope that SONY will have a deeper look into the implementation of BT

  Your

  Rhonin86

  The problem seems to be fixed with the new version of the firmware

  23.0.1.A.5.77

  This thread could be closed in my opinion.

• How to display the songs up next in the new ios10 iphone music app?

  I've just updated my iphone to ios 10 and I can not find where to see my music «to the top next» It is not in the same place that it used to be.

  When you display the song currently playing, slide up from the bottom.

  So far although I have not seen possible to add songs to the next place you used to be able to do, that * because I used that often. Never understood why Apple feels the need to delete the good features in these updates.

• Cannot change the song information

  Before I started, my version of iTunes is 12.4.3.1 and it is installed on a computer running Windows 10. I recently got a new computer, I loaded all my music from a backup on an external hard drive folder. I made sure to check the option to create a copy of the files in the folder music/iTunes/whatever. All the files are copied as they should be and are not read only.

  So, the problem is that I can't get music to sort the way I would like that there. In order to make it all easy, I generally browse and edit the fields of the artist and Album to something standard, and if there is no recommended or invited artists I add in the name of the song. I can't do more and when sorting by artist it gives their own place instead of grouping under the main artists artist invited.

  I tried everything I can to change the info. Get Info page now shows the corrected information (artist and Album are identical), but show it again each guest artist as distinct from the main when artist I sort by artists and there doesn't seem to be a way to change this. Ticking the box "this is part of a compilation" does nothing.

  I am at a loss here. I've never had this problem with iTunes before. Is there anything else I can try that I have not already?

  Try to repair the security permissions for iTunes for Windows.

  TT2

• display the songs in a list

  I downloaded the 64 bit version of iTunes on their line to my Windows 10 PC. My songs just now appear as the album covers, and I want to display in a list.  I don't see this option in the view or one of the menus. Any ideas?

  Select the sidebar if hidden. Choose the songs. In playlists, you can use view > display as > songs.

  TT2

• How to hide the information PDF/A sign and display the signature information panel? (plugin)

  Hello

  When you open a PDF/A compliant document and also has a signature digital then PDF/a information panel is always displayed with the text:

  You have opened the file conforms to the PDF/A standard and was opened in read-only to prevent the change.

  Instead, I would like that my plugin to display the Panel of usual signature information:

  Signed and all signatures are valid.

  It is possible to get this behavior by setting preferences-> Documents-> PDF/A-> Mode of display/a 'never '.

  What I would do is to programmatically set the information bar to display the status of the signature (for documents that are checked by my plugin, probably inside the dsGetValidState). For all other documents open it in PDF/A, by default, that's fine.

  No idea how to do the plugin with the SDK from the inside?

  There is no control over the 'Message of Document bar' from a plugin.

  Mode display PDF/A disable is a REALLY BAD IDEA!

• Why is the bar blackened and address grayed out instead of display the url information?

  -Recently installed Linux Mint 17.1 "Rebecca."
  -Delivery address does not appear when the text typed in the address bar
  -Green, grey and black colors appear instead, as if blocking the view information

  Could you check this thread started by another user of Linux and see if workaround it helps you on your system:

  How can I stop firefox ffrom blocking URLS

  There is a workaround:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste gfx and make a pause so that the list is filtered

  (3) double-click the preference gfx.xrender.enabled to change its value from true to false

  It takes effect after the next time you exit and restart Firefox.

  It works for you?

• Windows 8 order summary still displays the log information is incorrect

  I bought Windows 8 through the upgrade wizard and I wanted to check what my Windows Me DVD will be shipped. So I went to the Windows order summary page to see when it will be delivered, but it still shows the log information is incorrect. I checked all the details and and have repeated this process several times no nut no chance. Does anyone have a solution to this?

  Hello

  Thanks for posting in the Microsoft Community.

  I suggest you to contact the Microsoft store since you can not connect to command of Windows 8 Preview.

  See the link.

  http://www.microsoftstore.com/store/msstore/DisplayHomePage

• Displaying the right information to get a BSOD error help

  When your computer crashes and displays a blue screen there are often very valuable information about the photo that will allow users to help you solve your problem and to know what is causing this blue screen appears.

  Looking at the image at the end of the article you will see two sections highlighted, you will always want to post this information in your forum thread when looking for help she will be the most critical part of troubleshooting. The top tells us what's happening and said background where it goes to. We have just responded to two of the most important issues when you try to solve a problem.

  What's not?

  Where is the problem isolated to?

  Most of the text is quite annoying, but if that's important to you then it may be important for us. We have all seen what looks like a BSOD, but we do not know what your BSOD.

  There are more important questions that you can answer that will help your troubleshoot BSOD error message.

  1. What is your system brand and model? We know that you have an HP computer, but there are tons of computers. We need to know your specific model to ensure you use the appropriate drivers and we recommend the proper drivers.
  2. What is your version of Windows and the Service pack?
  3. Are you running a 64 bit or 32 bit OS?
  4. What is your Internet browser and version?
  5. Does your system use IDE or SATA disk drives?
  6. What virus protection software and current malicious software do you use? Is up to date?
  7. The issue occurred after an interruption of the power supply as an abnormal termination or power failure?
  8. What has changed recently?
  9. Does this happen often you can effectively reproduce the problem? If you can easily reproduce what steps can you take to reproduce the problem.

  Here is a list of the most common mistakes of the BSOD you can see

  • Stop 0 x 00000003 UNSYNCHRONIZED_ACCESS
  • Stop 0x0000000A IRQL_NOT_LESS_OR_EQUAL
  • Stop 0x0000001E KMODE_EXCEPTION_NOT_HANDLED
  • Stop 0 x 00000023 FAT_FILE_SYSTEM
  • Stop 0 x 00000024 NTFS_FILE_SYSTEM
  • Stop 0x0000002E DATA_BUS_ERROR
  • Stop 0x0000003F NO_MORE_SYSTEM_PTES
  • Stop 0 x 00000044 MULTIPLE_IRP_COMPLETE_REQUESTS
  • Stop 0 x 00000050 PAGE_FAULT_IN_NONPAGED_AREA
  • Stop 0x0000006B PROCESS1_INITIALIZATION_FAILED
  • Stop 0 x 00000073 CONFIG_LIST_FAILED
  • Stop 0 x 00000074 BAD_SYSTEM_CONFIG_INFO
  • Stop 0 x 00000076 PROCESS_HAS_LOCKED_PAGES
  • Stop 0 x 00000077 KERNEL_STACK_INPAGE_ERROR
  • Stop 0 × 00000079 MISMATCHED_HAL
  • Stop 0x0000007A KERNEL_DATA_INPAGE_ERROR
  • STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE
  • Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  • Stop 0x0000007F UNEXPECTED_KERNEL_MODE_TRAP
  • Stop 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED
  • Stop 0x0000009C MACHINE_CHECK_EXCEPTION
  • STOP 0x0000009F DRIVER_POWER_STATE_FAILURE
  • Stop 0x000000BE ATTEMPTED_WRITE_TO_READONLY_MEMORY
  • Stop 0x000000C2 BAD_POOL_CALLER
  • Stop DRIVER_VERIFIER_DETECTED_VIOLATION 0x000000C4
  • Stop 0x000000CA PNP_DETECTED_FATAL_ERROR
  • Stop 0x000000CB DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
  • Stop 0x000000CE DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
  • STOP 0x000000D1 DRIVER_IRQL_NOT_LESS_OR_EQUAL
  • Stop 0x000000D5 DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
  • Stop 0x000000D8 DRIVER_USED_EXCESSIVE_PTES
  • Stop 0x000000DA SYSTEM_PTE_MISUSE
  • STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER
  • Stop 0x000000ED UNMOUNTABLE_BOOT_VOLUME
  • Stop 0x000000F2 HARDWARE_INTERRUPT_STORM
  • Stop 0x000000F4 CRITICAL_OBJECT_TERMINATION
  • Stop 0x000000FC ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
  • STOP 0x000000FE BUGCODE_USB_DRIVER
  • Stop 0xC0000218 UNKNOWN_HARD_ERROR
  • STOP 0xC000021A STATUS_SYSTEM_PROCESS_TERMINATED
  • Stop 0xC0000221 STATUS_IMAGE_CHECKSUM_MISMATCH
  • STOP 0xC0000244 STATUS_AUDIT_FAILED

  

  This thread is purely an informative thread. If you are experiencing a BSOD error please create a new thread ensure you provide information that questions on this thread.

  While many BSOD errors may be troubleshooting-made the same way, there is an amount of many of them and they should be troubleshoot-carried out on their own.

  If you have anything else you want to add or general BSOD issues then you can post them here, but if you ask about anything that requires real troubleshooting it should be in its own thread.

• Automatically display the user information

  So I'm working on this website of the school project, it's a pretty simple site in Dreamweaver. I created a log in the site and I use MM_Username to show the connected to the user. How can I go to show information of the user (name, first name, telephone number etc.) on a wall that they display all sorts of different things in (to sell, animals lost, happening, etc.

  Thanks in advance!

  With queries SQL table names & field desired database.

  I hope that you do not use the obsolete Server & database for this panels.

  Nancy O.

• devices and printers does not display the correct information of device or the icon

  I click on devices and printers and of course my devices and printers all appear, however, the device appears to my computer shows in the information window which is a Tablet instead of a desktop PC, the model number is incorrect and also the icon as well. How can I fix this.

  Same question here.

  Solved with this microsoft hotfix to form
  http://support.Microsoft.com/kb/2403006
  It turns into the right device and realistic icon

• Display the header information on the second page

  Hello, I need help, exposing the header on the second page information, when the child IO component has more records on the second page. I tried looked to the top of the shelf and found no info on how to do this. Can someone please help?
  
  I have the data XML file and the model RTF when necessary.
  
  Thank you

  passed the updated model. Check and let me know.

• Is it possible to display the tool information in the Info pane?

  It is a feature of Photoshop and I was wondering if there is an equivalent InDesign. In Photoshop, whenever a tool is selected, the details pane contains information on this subject. For example, if you select crop, the details pane says "draw a rectangular selection or move the selection outline." Hold SHIFT, CTRL, and ALT for more OPTIONS. "If you hold SHIFT with selected cropping, the description becomes"constrain square selection or add to the existing selection. »

  It is VERY convenient. Is there something similar in InDesign? I don't see this information in the details pane. Sometimes, I watch the cursor changes in InDesign (for example, a small white triangle is added to the text tool cursor when you hover over the column guide) and I'm just at a loss to understand what this means in terms of functionality of the tool.

  Thank you

  Silvio

  I don't know - I bought a kit of party of taco for $20.

  However, I think that the guys missed something

  In CS5, you can go to the window > utilities and select tool tips

  You will get a panel upward and it will tell you the modifier keys associated with it regardless of the tool that you have selected

  Now to get some tacos

• Cannot display the channel information...

  For some reason any I'm more able to view channel information in the Layer palette. The channel tab is gone. What Miss me?

  You are missing channels Panel... go to the top in the Windows menu, and then select the Panel layers. You must have closed it so now you must reopen.

• crsctl does not display the correct information

  Here is what happened.

  There is a test at home for learning system. Oracle RAC 11.2

  It was working fine.

  I had a group of data called ASM DATA

  I added a new data group to asm called DATA1 and then I dropped the DATA1

  Now, when I restart the machine... the database does not start automatically... when I go to sqlplus and use the order... starting the database starts

  However after starting, if I use the command

  crsctl res stat - you

  I expect to see the State of the ora.rac.db online

  I see the State of the ora.rac.db offline

  I heard that after the removal of a group of data we do maintenance using SRVCTL command

  I checked on Metalink, but was unable to find any document.

  Please help.

  Here's what I did to solve the problem

  . / stat crsctl res ora.rac.db Pei | grep DEPENDS

  START_DEPENDENCIES = hard (ora. DATA.dg, ora. Weak(type:ora.listener.type,global:type:ora.scan_listener.type,uniform:ora.ons,uniform:ora.eons) of Data1.DG)

  pullup (ora. DATA.dg)

  Hard = STOP_DEPENDENCIES (intermediate:ora.asm, stop: ora.) DATA.dg, shutdown:ora. Data1.DG)

  The above was incorrect because the disk DATA1 group fell however crsctl registry was not updated.

  I tried the below command but it didn't work

  . / crsctl change res ora.rac.db - attr ' START_DEPENDENCIES =' hard (ora. " DATA.dg)

  Weak(type:ora.listener.type,global:type:ora.scan_listener.type,Uniform:ora.ons,Uniform:ora.) Eons)

  pullup (ora. DATA.dg) "" "

  then I tried the command above with the indicator f and it worked

  Now, I gave the next command

  . / crsctl change res ora.rac.db - attr "STOP_DEPENDENCIES =" tough (intermediate:ora.asm, stop: ora.) "." DATA.dg)' '-f '.

  then I stopped the cluster and rebooted the machine

  but the database did not come to the top...

  so I did a little research and gave to the next command

  . / crsctl change the resource ora.rac.db - attr AUTO_START = always

  ... Stop cluster and restart

  BinGO... the issue is now resolved