Disqualification: Date conversion problem

Similar Questions

• CRIO-9066 FIFO data conversion problem

  I'm having a problem with a multiple element SGL FIFO on a cRIO-9066 where data is not read correctly.  Here is the configuration:

  I have two Host - to - Target FIFOs, identical except for type: FXP is the other SGL.  Both are 16-element.  Data SGL which are read turns a conversion error.  A sample minimum (2014 for the 9066) project is included.

  The example works fine if the FIFO SGL 1-element; something more big fails.  Is not supported on the same 9066 thought that the project allows the creation?

  Thank you

  David

  It seems that maybe it's a bug in the Simulator.  Exit the simulation mode, run it on your target and watch the interactive mode in this way.  The results are what you expect.  It is strange that they would be converted at some point.

• the date conversion problem

  Hi friends,

  I have a problem with the conversion of the date in my PB.

  SELECT eff_dt, TO_CHAR (TO_DATE (eff_dt, 'Dd-mon-yy'), 'dd-mm-yyyy') DATE from une_table;

  It gives me o/p as -.

  DATE OF EFF_DT

  01.01.1950 00:00:00 01/01/2050

  as you can see here the year is wrong, while I convert the date that I use the substr() also to cut the year of first line, but it gives me the 50 i.e. onle last (YY)

  So, if someone can help me with this prob.

  If eff_dt is a column DATE, then stop calling to_date on it.

  If this is not the case, consider making it into a DATE column. If you are unable to do this, use the format mask appropriate when you call to_date

• date conversion problem

  Hello

  My version of db: Oracle 11 g

  "Is there a way I can convert date in this format 04.10.15.000000000 13-SEP-06 PM' to 13-OCT-06 16:10:15 ' or 13-SEP-06 16:10:15.

  Please suggest.

  937454 wrote:

  But I need to load it into the target as "yyyy-mm-dd hh24:mi:ss" table (as you say with year-round)

  Danger Will Robinson, Danger!

  If your target table is, as it should, a date data type, then you don't have to load it into a specified format. If the source table and the target table are the two dates, so no conversion is necessary at all.

• dynamic double bit data conversion

  It could be very simple, but I was confused. I have current data and average data as in code. I want to build the table using these data, save them on my hard drive and open in word with header (current and average)

  Problems:

  I have data from two sources in lead generation and versions table as shown entry table to write on the worksheet vi. I get the error source is dynamic and double sink is a bit. It is the most difficult part of my life to find out what range of conversion to use.

  When I run the vi (lets assume the good range of conversion is connected and there is no conversion error) pops up the dialog for path that comes up constantly on dialog

  Ideally I want appears on the screen when I press on would go so that I can browse location to save the file, and once the path is specified vi works continuously and the data is written to the worksheet while vi is running.

  Thanks a lot for reading and help

  See you soon

  Welcome to the evil world of dynamic data. What you really want to use is the merging of signals feature. When you do this a dynamic data conversion will be automatically added between the signals to merge and writing on a spreadsheet file.

  You can consider using writing to the file position as directly accepts dynamic data.

  With respect to the path, use a shift register.

• data flow problem, queuing Subvi primary VI

  Ive stuck on a very simple data flow problem here, I would like to convey the data queued in the Subvi and dequeue in the main loop of the vi consumer. Ive attached the vi, since im already stuck on this problem, I was hoping I could learn a few things, especially implementation action engine in this situation

  Thank you.

  Your Subvi makes no sense since your loop will always leave after the first iteration and you always initialize your counter to 0 whenever run you it. This is a problem.

  Your code also suffers from several places that are made by the queue data. You will get undeterministic behavior since you do not know which dequeue will get the first data. In general, for a producer/consumer using the architecture queued one or more loops loops should be given enqueueing to the queue. A single loop must be made of data. These loops shuold run in parallel to each other. In your code, you can only run your Subvi whenever you press the Start button and as said you will always show the value 1 to the queue. What you need to do, is to have your Subvi managed independently once it is started. Use "Start Asychronous CAll" to start your Subvi when the Start button is pressed then let it just run. Have it post the meter to the queue. Your lower loop in main VI should remove the values and display them. You need not wait in this lower loop since it is the purpose of the dequeue. This loop will be inactive if there is no current data and run only when the data is in the queue.

  In the upper loop of your VI main remove the dequeue and the queue. You don't need them as the Subvi is all that is necessary to validate the data in the queue.

  Try this:

  

  

• Problems of data Conversion from 8.9 to 9.1 HRMS

  We do the HRMS 8.9 to 9.1 upgrade. We met below error while doing the CONVERSION OF DATA.
  
  After the initial analysis, we found that this column is missing in the rendered Table. Please help what steps should take this problem to overcoem.
  
  
  
  
  
  
  Number 1: -.
  
  PeopleTools 8.52.04 - engine application server
  Copyright (c) 1988-2012 Oracle and/or its affiliates.
  All rights reserved
  
  
  PSAESRV service request has started 21.51.43 2012-03-25
  
  
  Process 517495 resumed after the UPG_SC90 step. HCSCM30. Step00 (108 538)
  
  File: error vob/peopletools/src/psappeng/aedebug.hSQL. Stmt #: 1620 error Position: back 59: 904 - ORA-00904: "HR_PTCS_SERVICEID": invalid identifier
  Failure of SQL stmt:INSERT IN PS_HCM_EO_TXN (nom_de_transaction, EOAWPRCS_ID, HR_PTCS_SERVICEID, DELEGATION_INIT, DELEGATION_APPR) SELECT TRANSACTION_NAME, EOAWPRCS_ID,' ', DELEGATION_INIT, DELEGATION_APPR OF PS_EO_TRANSACTIONS
  
  Process 517495 ABENDED to step UPG_SC90. HCSCM30. Step01 (SQL) - RC = 904 (108 524)
  
  Process %s ABENDED to %s.%s.%s (step %s) - RC = %s
  
  PSAESRV filled with 21.51.44 service request 2012-03-25
  
  
  Question No. 2: -.
  
  PeopleTools 8.52.04 - engine application server
  Copyright (c) 1988-2012 Oracle and/or its affiliates.
  All rights reserved
  
  
  PSAESRV service request has started 21.51.43 2012-03-25
  
  
  Process 517496 resumed after the EOUFDATACONV step. Process.Step003 (108 538)
  
  File: error vob/peopletools/src/psappeng/aedebug.hSQL. Stmt #: 1620 error Position: 90 return: 904 - ORA-00904: "GPCH_CA_RELATION": invalid identifier
  Failure of SQL stmt: SELECT 'X' FROM PS_INSTALLATION WHERE NOT EXISTS (SELECT 'X' "FROM PS_GPCH_CA_DATA2 WHERE GPCH_CA_RELATION <>'")
  
  Process 517496 ABENDED to step UPG_GPCH90. HCGCHP50. Step010 (make when) - RC = 904 (108 524)
  
  Process %s ABENDED to %s.%s.%s (step %s) - RC = %s
  
  PSAESRV filled with 21.51.44 service request 2012-03-25

  PeopleSoft Patches and site updates, I see that required to install HRMS 9.1 (need to apply to the demo), HCM91 MP5 CUMULATIVE in required.
  Search
  Product range: HRMS
  Product: install
  Version: 9.1
  Option: Required for installation.

  MP5 contains, as you said, to bundle 7.

  Just checked on an environment that has no package 8 and this area does not reside in the folder.

  Errors looks like to they required to upgrade PRJ872267 HRMS UPGRADE 9.1 BUNDLE #12.
  I can see the two sql sent in this patch.

  Have you installed PeopelSoft HRMS 9.1 or the latest version, including the Feature Packs?

• Problems with data conversion

  Hi all

  I'm doing an A - D conversion. Conversion table is given in attachment, as well as the file vi. I got three 8-bit during serial communication data and join them to form a 24-bit number (I mention this so there is no question why mets implement entry like that). As you can see in the table of conversion without exit number must be greater than Vref, however in this implementation, I get a flow of 2 * Vref.

  Can someone please help me find the error.

  Darko

  The conversion formula is implemented for bipolar data while your VI U32. You cannot represent negative numbers with U32 (unsigned integer).

  Lynn

• Problem of data Conversion HTTPService

  I have a REST-style web service that returns an HTML document that looks like this:
  
  < a >
  < b >
  < c > 2.0 / < c >
  < b >
  < b >
  < c >/< c > 3.2
  < b >
  < /a >
  
  I can use the browser to view this document, and it looks as expected. However, when I use a Flex HTTPService to get the document and display its values, all numbers ending by ".". 0' are rounded/truncated. For example, the first element < c > above appears as '2' instead of '2.0 '.
  
  Why numbers are converted? Shouldn't they have considered all other text in an XML element?
  
  That's what I call service:
  
  < mx:HTTPService id = "myService" url = "itsurl" method = "GET" useProxy = "false" / >
  
  And it is an example that shows a number being trucated/rounding:
  
  < mx:Label text="{myService.lastResult.a.b[0].c}"/ >
  
  Thank you
  
  Mike

  The default value for HTTPService is resultFormat = "object", which causes Flex convert your xml file into a tree of dynamic objects. It is rarely what you want. Among other things, he's trying to type conversions.

  Instead, the value resultFormat = "e4x". This will give you your xml code that the United Nations has changed. It also gives you access to the e4x which is very powerful API. It includes features of course, search and always.

  In addition, for another thing what a banal or demonstration app, do not directly bind to the lastResult. Use a function instead of the result handler. Here is an example, untested:

  
  (in the script)
  Import mx.rpc.ResultEvent;
  [Bindable] private var _xmlResult:XML; var instance to store the data
  private void onResult(event:ResultEvent):void {}
  _xmlResult = XML (event.result);
  trace (_xmlResult.ToXmlString ()); to see exactly what you
  ....
  }

  Note your example of XML is not valid, so I can't show you an example of an e4x expression.

  Tracy

• Conversion problem of oracle.jbo.domain.Date in java.util.Calendar and oracle.jbo.domain.Timestamp to oracle.jbo.domain.Date

  Hello world

  Work with dates has been harder than I thought! Please take a look at the code; everything compiles, but it fails because I'm not cast properly. Any help would be appreciated.

  Imports are:

  import java.sql.SQLException;

  to import java.text.ParseException;

  import impossible;

  import java.util.Calendar;

  Import oracle.jbo.domain.Date;

  Import oracle.jbo.domain.Timestamp;

  Here is the method:

  public static Date (String sDate, int day, nextDay

  SimpleDateFormat String) {}

  Date result = null;

  java.util.Date date;

  If (sDate! = null) {}

  try {}

  System.out.println ("Try...");

  Calendar calendar = Calendar.GetInstance ();

  SimpleDateFormat dateFormat =

  new SimpleDateFormat (simpleDateFormat);

  calendar.setTime (dateFormat.parse (sDate));

  Calendar.Set (Calendar.DAY_OF_WEEK, date); day = Calendar.SUNDAY

  Calendar.Set (Calendar.HOUR_OF_DAY, 0);

  Calendar.Set (Calendar.MINUTE, 0);

  Calendar.Set (Calendar.SECOND, 0);

  Calendar.Add (Calendar.DATE, 7);

  dateFormat.format (calendar.getTime ());

  try {}

  System.out.println ("try (inside)... ») ;

  "System.out.println (" new Timestamp (calendar.getTime () .getTime ()) "):" +.

  new Timestamp (calendar.getTime () .getTime ()));

  result = new Date (Timestamp (calendar.getTime () .getTime ())) new; Code does not work here.

  return the result;

  } catch (SQLException e) {}

  System.out.println ("catch (SQLException e)... ») ;

  e.printStackTrace ();

  }

  Returns a null value.

  } catch (ParseException exception) e {}

  System.out.println ("catch exception e ParseException... ») ;

  e.printStackTrace ();

  }

  Returns a null value.

  }

  Returns a null value.

  }

  Here is the result:

  try...

  Try (inside)...

  new Timestamp (calendar.getTime () .getTime ())): 2013-12-29 00:00:00.0

  catch (SQLException e)...

  java.sql.SQLException: failed initialization

  to oracle.sql.DATE. < init > (DATE.java:237)

  to oracle.jbo.domain.Date. < init > (Date.java:378)

  James

  try to convert timestamp to jbo.date as

  java.sql.Timestamp datetime =newjava.sql.Timestamp(System.currentTimeMillis());

  oracle.jbo.domain.Date daTime =new  oracle.jbo.domain.Date(datetime);

• Disqualification - data on clients of the Service Pack; Installation problem

  Hello

  I managed to download and get the CD pack.

  I can see the projects in realization. But when I try the kickoff of the HAND - initialize data reference job I get the error "an error occurred creating parameters of working language [A] initialize: cannot load the process [A] initialization of the language settings (Code: 207, 103)"»

  I tried to perform the work within the Director and also in the Console of the server with the same message

  Any help much appreciated.

  Concerning

  
  SARB

  Hi Mike,.

  You probably have not imported the dxi fully. Did you get errors when importing the project? Have you extracted config.zip provided in the distribution on the existing config directory? If this isn't the case, then it will miss the widgets and gadgets.

  Also, if you want the off-field box settings language then you don't need to use the Initialize project.

  Kind regards

  Nick

• date to character conversion problem

  Hi, if I use the query
  
  Select to_char(hiredate,'dd-month-yyyy') in emp;
  
  As a result like:
  
  TO_CHAR (HIREDATE,
  -----------------
  -17 December 1980
  -20 February 1981
  -22 February 1981
  02 April-1981
  September 28, 1981
  01-May-1981
  
  
  BUT what of the query (I added one more would be "for the date format): select to_char(hiredate,'ddd-month-yyyy') from emp;
  
  which displays the result (SEE DATES)
  
  -352 December 1980
  -051 February 1981
  -053 February 1981
  -092 April 1981
  271 September 1981
  -121 May 1981
  
  
  and if I use one more would be "in like date format: select to_char(hiredate,'dddd-month-yyyy') from emp"
  
  It displays
  
  -3524 December 1980
  -0516 February 1981
  -0531 February 1981
  -0925 April 1981
  2712 September 1981
  -1216 May 1981
  
  
  Can anyone TELL WHAT MODEL OR RULE IS APPLIED HERE TO THE DATE which IS HANDLED according to THE NUMBER of a is in THE DATE FORMAT? HOW DATES ARE BEING CALCULATED WITH DIFFERENT NUMBER OF ds?

  Hello

  For JJ, is show you the day of the month
  i.e. for December-17-1980 is 17

  For DDD, it shows you the day of the year
  That is to say. 17 December-1980 it is 352

  For Davis, it is show you the year and day in the week.
  IE.17 - December-1980 grave Wednesday (4th day of the week) is 352 and 4 i.e. 3524

  Concerning
  Anurag Tibrewal.

• Data capture, etc. using SQL Developer mysql Orac conversion problems

  Hello
  
  I have been using Sql Developer to try to convert my mysql database to oracle, I managed to set up the connections and the repository very well. However, when I right click on my database connection and click on the capture of the capture window appears but nothing happens. What I am doing wrong?
  
  Thank you
  
  
  Aaron

  This error usually indicates a corrupt repository of migration or a user privilege is missing.

  Also the migration of SQL Developer 2 and 1 repository is not compatible - so I would say to create a single repository user for each new version.
  It is a repository of sample for SQL Developer 2.x user:

  CREATE USER migration IDENTIFIED BY migration DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;

  GRANT CONNECT, RESOURCE, CREATE VIEW, CREATE A PUBLIC SYNONYM TO
  Migration WITH the ADMIN OPTION.

  GRANT ALTER ANY ROLE, ALTER ANY SEQUENCE, ALTER ANY TABLE, ALTER TABLESPACE, ALTER ANY TRIGGER, COMMENT ANY TABLE, CREATE ANY SEQUENCE, CREATE ANY TABLE, CREATE ANY TRIGGER, CREATE ROLE, CREATE TABLESPACE, CREATE USER, DROP ANY SEQUENCE, DROP ANY TABLE, DROP ANY TRIGGER, DROP TABLESPACE, DROP USER, DROP ANY ROLE, GRANT ANY ROLE, INSERT ANY TABLE, SELECT ANY TABLE UPDATE no matter WHAT TABLE OF migration;

• String to number conversion problem

  I have a VI that pulls in data from a device using VISA, and I got it on another computer to work a few weeks back. I had to transfer the VI to a laptop computer to run a few tests, and now I can't make it work. I am unable to put my VI because the laptop on it's is unable to access the network companies, I will do my best to explain it all, I apologize for the inconvenience! My problem is not however with VISA, it's with an exit VISA number conversion chain.

  I have attached a painting drawing of VI to better explain it.

  I use the block series Visa football match in baud rate and all that many good things to the unit and port settings set of device management. Then, a while loop is entered. The loop will run until you press the stop"" button. The next block of visa is the writing block, he asks for a reading of the device. The next block of visa is the first block of reading, he returns playback in the form of "NA-XXX. X' where x are numbers. The next block of visa is the second reading block, this block just echoes back the command sent to the device. Playback of the first visa read block, "NA-XXX. X' is going exponential/fractional chain to digital converter.

  When you perform a run/debug to highlight run, the release of visa reports the correct value, is the value of the device reading - however the string to number converter generates a 0,000, no matter what channel number is. I am at a loss as to what may be wrong because it's the EXACT set up I had to work very well a few weeks ago!

  I'm using Labview 10 on the laptop, the old computer was labview 7. I'm guessing that this is perhaps the rub... I Redid the VI from scratch, although I have not opened the old VI in labview 10.

  Any help would be appreciated. Again, sorry I am unable to attach the VI.

  DARB wrote:

  I have attached a painting drawing of VI to better explain it.

  Would it not have been easier to just post a screenshot? You might also have used the Tool of Capture of Code. (Which reminds me that I need to install it to my previous versions of LabVIEW, as evidenced by the screenshot I took. )

  As to the question: you probably either:

  • employee analysis of chain initially and when you rewrote the VI you used the regular string conversion functions.
  • Wired an offset value in the string to the number function.

  

• RedHat4 conversion problem

  Hi guys,.

  I convert a server Linux Redhat 4, and it gives me problems. When I start the wizard, select a remote computer, powered, he know "a general error has occurred: uninitialized: converter.info.StorageInfo storage.volume.diskId. Unfortunately, it is not all that useful to understand what is happening. My log files are included. Any suggestions to what is happening?

  See you soon

  Nik

  I'm guessing it's because you have volumes that are mapped directly to complete drives, instead of create a partition to contain the volumes.  It is not supported by the converter at the moment, please see the release notes:

  http://www.VMware.com/support/converter/doc/releasenotes_conv401.html#84

  You could try to remove those file systems that are mapped directly on the hard disks (/ storage/data_01, etc.), and then try to restart the Conversion.  After that it's over, you can add new disks on the virtual computer and just copy the data of these file systems that you have ignored.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').