Distance from logic and Mainstage

Similar Questions

• Toshiba ACPI device driver based on added value logical and general purpose

  Had to rebuild my Satelite A40 from the recovery CD and I get a message asking me to install a TOSHIBA ACPI-Based added value logical and objective general Device Driver. He can not find a file called tvalz.sys and I can't find a download appropriate on this site... can someone advise. Thank you James

  Hmmm I think that ACPI-Based added value logical and objective general Device Driver belongs to the Toshiba common Modules.

  This utility of common Modules can be found on the European driver Toshiba page.
  Download and just install it again.

  But I wonder why you should install it after using the Toshiba Recovery CD?  :|
  The restore CD contains all the necessary drivers, so I think that this common modules must be installed. But who knows

  Try my advice and install the common Modules as shown above

  Good luck

• bean, containing the business logic and user interface components

  Hello experts design ADF, please guide me.   I came across a critical design aspects.  I have the homepage with a lot of UI, region 1, region 2 components. I bind the components of the user interface of the page at a session scope managed bean and is the reason why, when control passes to the region 1 or region 2, I'm going to do a lot of processing logic and then on that basis, I have to update the page user interface components.   Same thing with region 2 also.  And then I should be able to access the information in all regions and also through other components of interface user etc.

  I see only the scope session bean can help me here to get my tasks in all regions and in all the other components of the interface user to the page because I'm not able to spend too many parameters in all regions.     Now the problem is, I can't serialize this bean because as I've mentioned a lot of user interface components are updated based on logic.

  If I do not serialize the bean, I might have a problem in the future when the application must be deployed to the cluster envt.

  I don't know how can I go with my design now.   Please give me ideas, brilliant and very grateful for your advice.

  Thank you

  Hello

  I did not follow the entire thread, but this last message, I can tell that you are not using ADF how it should be used. So let me address two issues

  1. I use data controls generated on methods of bean managed my areas (workflow).

  If you create a POJO data control that you configured as controlled beans then this will be two instances (separated) from the same Java class. This means that they do not share anything. The only option to share state between a managed bean and a data control is if you would have the data dynamically control bean up the bean managed using the language of Expression of the 8which then however creates a dependency between the DC and the bean - however, there are use cases like that)

  2 activation / deactivation of the buttons in the parent view of a region

  This can be done using bean-injection, which is a bean managed in extended view defined on the parent view that you pass as parameter for the workflow. See: http://www.oracle.com/technetwork/issue-archive/2013/13-may/o33adf-1920483.html

  As said, I haven't read the entire thread, but want to point out that there is enough information in writing (product documentation) and video (Insider ADF - who teach the development of SFM practices http://www.oracle.com/technetwork/developer-tools/adf/learnmore/adfinsider-093342.html take the time to review this)

  Frank

• Decrease the opacity of the layer with the Distance from the camera

  Is there a way to automatically decrease layer opacity that layer away a camera?

  We will break down the process of thought, of expression and see if we can make it work for you.

  First of all, you must measure the distance between the camera and the layer. The Expression Language Menu effects has a under vector math method which measures the distance between two points, we can use. Use the camera to a point and the position of the layer on the other and we have the first number.

  Now we must decide what we want the opacity to what concerns the distance. When the layer is the same distance from the camera the zoom value will be called the equivalent of a scale of 100%. It is perhaps a good place to have the layer is completely visible. This distance is easily implemented by assigning the fully visible distance to the Active camera zoom value. Then we have to decide how far the layer must be when it is completely invisible (opacity = 0). Personally, I think that the best way to proceed is to use a multiplier for the zoom value. 4 X with most lens settings is a nice distance.

  To configure the relationship between the distance and the maximum opacity, you can use one of the methods of Interpolation in the Expression Language Menu. We will use the method with the maximum and minimum values.

  We'll put that together in an expression. The two methods to use are

  length (point1, point2)

  linear (t, tMin, tMax, value1, value2)

  Set some variables for each of the values and we're done:

  point1 = thisComp.activeCamera.position;
  point2 = position;
  tMin = thisComp.activeCamera.zoom;
  tMax = tMin * 4;
  value1 = 100;
  value2 = 0;
  
  t = length(point1, point2);
  easeIn(t, tMin, tMax, value1, value2)
  

  If you really want to get fancy then you can add a transformation from layer space to the camera and the layer so that the expression might work even with or without layers relative to the camera and/or the layer. ToWorld changing looks like this:

  point1 = thisComp.activeCamera.toWorld([0,0,0]);
  point2 = thisLayer.toWorld(anchorPoint);
  

  Furthermore, I use usually more descriptive and shorter names for variables, but thought that it would make it easier to understand what was going on in the expression. I use also usually Active camera for my expressions rather than thisComp.layer ("camera 1") because it works little whatever you named your active camera.

• Can I rent a movie from iTunes and then see it on the plane?

  Can I rent a movie from iTunes and then see it on the plane?

  In principle Yes. See about renting movies from the iTunes Store - Apple Support. Pay attention to this section:

  To watch your movie when you are disconnected, as on a flight from the airline where there is a Wi - Fi connection:

  • Download the whole movie before going offline.
  • Press play to start watching. The 24 hour timer starts even if you are offline.

  You may want to download rented movies before the day of your trip to make sure you have the time to download all the content.

  TT2

• Cannot access my Comcast mail since the last update. I can access it from Safari and Microsoft Windows, but generally do not either of these browsers use

  Cannot access my Comcast mail since the last update. I can access it from Safari and Microsoft Windows, but generally do not use either of these browsers. I chatted with Comcast and they are the ones who asked me to try to gain access to other browsers. And, as noted, I managed. Only my opening my email to Comcast.net inhibits the Firefox, the browser that I use on a regular basis because of this problem I can't use Firefox.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Problems with WiFi from Toshiba and their lack of support - you're not alone

  For those of you out there problems with WiFi on a Toshiba laptop, you're certainly not alone.

  Over the past years, I have noticed a growing number of different brands and models of computers laptop toshiba and laptops with the same problem.
  Last year, 100% of the toshibas that came in my workshop have had this problem, it is about 75% of the laptops that I fixed.

  These models have all hardware wifi (Agere, Intel and Realtek)

  The wifi switch is on, on the same computer, some programs to detect as being market, others see it as extinct.
  What, it doesn't connect to a same wireless router when used to.

  Responses of toshiba were the usual non-professional form response from: it must be the router, try to flip the switch, you have updated the bios?, update the drivers et al.

  It is a software problem, and given the number of people on this forum talking about the same issue, it's a great.

  Often, I came across the issue of windows for communication services wireless disabled by software of Toshiba and I believe, that it is a conflict between tosh software and various other (zone alarm, windows and al.)

  In some cases, the software seems to intervene and to corrupt the OS from windows drivers and interfere with their implementation and enforcement, which is worrying, the software doesn't have to touch all areas. (if not, what is the point of a BONE in layers)

  I sometimes managed to force to work (for example manually restart the services), but these solutions are not a "clean way" of doing things.

  The most reliable way to solve this problem seems to be, backup your data and reformat back to the manufacturer's specifications, and then immediately uninstall the software from toshiba and update the drivers terribly old (even those on the site are about one year more up-to-date for the model I'm working currently on.) Unfortunately most of my clients is companies that need a LOT of data stored in different saved locations, then a ton of programs specialized to be reinstalled, which is slow and costly.

  Message from TOSHIBA:
  Please make it a sticky in this forum for all the REAL solutions, not one of the threads that I watched with your suggestions has been resolved.

  If there is little no support for your products in this regard, I will contact the ACCC, choices, and associations of trade fair with an open letter that I ask all customers affected to sign, and I will put a national call for people with the same problem to come forward.

  I would like to ask also if you encounter a problem where your wifi stopped working and it does not detect or work, please just post "bump" under here so that we can keep way reasonably clutter free.

  I used to recommend Toshiba and Asus for laptops, now, this list is one.

  Greetings from the Australia (aus site sent me here for the forums)

  Damien Holley

  +@lonetraider+
  You can do what you want but as mentioned above; WiFi problems are not specific to a laptop manufactures, you'll notice WLan issues on computers (laptops, desktops computers) all manufactured products.
  I had 4 different books of four various manufacturers and ALL had problems of WiFi, but most problems could be solved by the driver update, change, or reset of the router are.

• I want to order several books of photos from iPhoto and have they to be sent in a single delivery. How to do this please?

  I want to order several books of photos from iPhoto and have they to be sent in a single delivery. How to do this please?

  Thank you

  N ° only several copies of the same book can be combined in one shipment. Separate books = distinct impression = separate shipping. It's how Apple works is the print service.

  

• I mistakenly remove updates from facebook and other networks, please how to restore it back

  Original title: error.

  I mistakenly remove updates from facebook and other networks, please how to restore it back

  I mistakenly remove updates from facebook and other networks, please how to restore it back

  Hello

  Use the following website links to Facebook help.

  Facebook Help Center | Facebook: http://www.facebook.com/help/

  Facebook Support Forums: http://www.thefacebookforum.net/forum

  Concerning

• trying to print from quicken and I get an error message that says that I have to be in the mode of administration and run restore pdfdriver.ba

  I try to print from quicken and I get an error message that says that I have to be in the mode of administration and run restore pdfdriver.bat.  I don't know what is a mode of administration, nor I know what is a pdfdriver.bat. Can anyone help?

  Hello

  1. what operating system do you use?

  2. what web browser do you use?

  3. have you made changes on your computer?

  4. What is the brand and model of the printer?

  5. are you able to print from other applications?

  When a printer is installed, members of the Administrators group on the computer are given permission to manage the printer by default. If you have an administrator account, you can probably change the printer properties. Otherwise, you must obtain permission to manage the printer before you can change the properties of the printer.

  Method 1:

  If you are using, I suggest you send the link to learn how to open a session as an administrator.

  How can I connect as an administrator?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-log-on-as-an-administrator

  Method 2:

  I also suggest you to see link and check.

  Error when printing to a PDF file: PDF driver is not found

  http://Quicken.Intuit.com/support/help/error-when-printing-to-a-PDF-file--the-PDF-driver-cannot-be-found/GEN82191.html

  Cannot print from Quicken

  http://Quicken.Intuit.com/support/help/not-able-to-print-from-Quicken/GEN82237.html

• I got a phone call from someone who said they were from microsoft and my computer was in danger, unless I paid 130 pounds for a new warranty, is it a scam?

  I got a phone call from someone who said they were from microsoft and my computer was in danger, unless I paid 130 pounds for a new warranty, is it a scam?

  Hi Debra,

  It's a SCAM! Microsoft does not make that neither have they partners that do and don't they hire contractors or individuals or even to find volunteers to do. There are probably thousands of these companies out there do every day - we get two or three posts like this (or more) each day ask about it. You are lucky who have recognized the scam enough not to be sucked in and eventually identify theft, infections, hacking your computer, convince you to buy software or services you either did not need or that do not really exist at all and all sorts of nefarious stuff. You'd be surprised how much contact us AFTER THAT that they realized they had been duped asking what to do. Don't waste time talking to these people, not give them any personal information it is, don't be fooled by what they can get allows you to see on the computer - in fact, not do anything they suggest on your computer or even to visit Web sites they recommend and for the love of God don't give them access to your computer.

  Microsoft knows this is happening, but with these companies popping up like dandelions, or closing and changing names when discovered and operating mainly from abroad, it would take an army of lawyers to sue each other. They do the best they can, but they are just too many and more added every day. People need to pay attention to these things. They occur not only by telephone, but also by e-mail, instant messaging, mail and all the ways imaginable. Forget not that Microsoft doesn't this and hang up or remove the emails or messages or mail from someone claiming that they do because they know the information on your computer or that you want to get information from you to confirm your account so that it will not be closed and asking you your name of user and password and all sorts of other personal information. Microsoft DO NOT!

  See below for additional information on this topic and what to do and how Microsoft works:

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx

  I'm glad you don't get captured by these crooks and save yourself a big headache. Continue to use the same caution and you should do fine.

  Good luck and best wishes!

• I got a call from a woman who told me she was from microsoft and my computer shows signs of malware

  I got a call from a woman who told me she was from microsoft and my computer shows signs of malware, then let him check my computer remotely, he appeared on my screen that I had 39000 flaws and they would now clear them for free, then, she told me that I need an internet security shield to stop what is happening again at a cost of £189.00 a one-time payment. I told him I didn't have the money and after some time, she put a guy on the line to convince me that I should buy this article, I told him I wasn't happy to transfer money to a stranger and I thought it was a scam and hung up. I noticed that they had installed a program called Advanced SystemCare3, which I've uninstalled it. Now, I'm worried that they can hack into my computer and find the personal information.

  Is this possible?

  It is a scam. See:

  http://www.microsoft.com/en-gb/security/online-privacy/msname.aspx .

  If they have access to your PC, they can install any number of malicious programs, as well as you have uninstalled. My recommendation is to do a clean reinstall of Windows - it's the only way to be sure that your system is clean.

  All the data on your computer (passwords, credit card numbers, numbers of account documents, etc.) may have been compromised (they may not know now). According to the companies concerned (for example your bank) what happened.

  Use another PC to change passwords.

  Consider telling your local police.

  Microsoft will never call you unless you request them.

• logical AND with the structure of the event

  Hello world

  The structure of the event can manage several events at once to do the same thing: looks like an OR logical operator. But I have not found a way to sequence events to approach a logic and example: you must click on a button to draw, then enter the image would change the mouse cursor. With a structure of the event, I can handle these 2 events separately or together (i.e. change the cursor), but I can't do a sequence of events.

  Is this possible to do with a structure of the event?

  I hope that I am clear (sorry for English btw). And thanks in advance.

  Christophe

  I don't think this is possible directly. You will need to add status information to your event loop that could enforce the order of events and the rules of logic you want. Where transformation you would have to check whether the required event has occurred before this event. If that were the case, perform your treatment. If this isn't the case, ignore the event. Your first event would need set this status information. You can also include some kind of time-out for the second event were to occur within a specific period.

  This type of logic may be better treated with the help of producer/consumer architecture and a state machine in the task of the consumer.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• How to take a photo from facebook and download it to my photos?

  I want to take a photo from facebook and save it in my files. How can I do this?

  Honestly, I don't think that it is more difficult to tell you how to save pictures, it is to find a specific article and put it in.

  Click with the right button on the image, select Save image as, choose where you want to save and click Save.

  Is it really so hard to tell who?