Distiller cannot find its ICC profiles sdandard

Similar Questions

• Cannot find the user profile

  After turning on my computer, I try to connect with our user account. an icon appears and says that the user profile is damaged and there could be a security issue.  the following icon says that it cannot find the profile of the user and that a temporary profile has been put up.  I'm trying to get back access to the user profile because he has sensitive information at the time that must be consulted, photos of family and passwords important programs.  I need to know that if there is a way to restore the user profile and retrieve information, the user profile of temporay gives access to certain programs and software, but not the critics.

  The following procedure, you should get pretty quickly:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  Damaged profiles are almost always accompanied with alteration of the disc.  In addition to the above (or sometimes instead of him), a check disk with the /f or/r option is highly recommended.  Note that on a large drive or a drive with a lot of problems this audit can take hours and you cannot use your machine while it is in progress.  In addition, there is a small chance that it may be worse, so now is a great time to update your backups.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• At startup, the windows startup, an error message that says: "Windows cannot find locally - stored profile login with the temporary profile. "You will lose changes when arrested. What can I do to fix this?

  This Windows XP Home. on a Compaq Presario SR1710NX.  Windows can not find the locally stored profile and logs on to a sense of temporary profile every time that the computer is off all changes is lost.

  Your user profile is damaged and you put in a temporary user profile. This is why nothing is saved. Create a new user profile for yourself and copy the data from the old profile to it. After you have all your stuff, you can remove the old corrupted user profile if you wish. MS - MVP - Elephant Boy computers - don't panic!

• Called Labview VI cannot find its controls or subvi

  My application consists of:

  A standalone .exe that calls graphic VI containing generic and VI controls.

  My app works very well in the development environment, but when I deploy the secondary can't find it's the generic controls or vi (he uses the paths of the vi of the development environment).

  I have included these files in the .exe in the expectation that the sub called vi would know where to find them.

  Alas, this isn't the case.

  These controls and vi are used in the usual way, and not by "reference open vi" both trace band style operations are not an option.

  --

  A simple solution is to insert multiple copies of them in the library of each auxiliary Panel under vi .llb

  These files are generic and used in multiple under vi, in the spirit of reuse and management of the code, this method is a bad habit.

  A single vi is a global variable functional, shared between both the appellant and vi.  Who will no doubt shock the code by the performer in 2 separate cases.

  ----

  Is there a way for the secondary sub VI to find it's generic controls and VI by calling .exe?

  ---

  A solution to this problem would be highly appreciated.

  Tim L.

  In my opinion, it is an ugly workaround.

  In this example, the same control is present in 2 places, both in the .exe and the .llb

  -Perhaps you are missing the point - whether moving the LLBs in the folder with the file EXE solves the problem, then the point is NOT that there is a fix, the point is that something in the LLB is NOT available in the EXE file.

  If it is a CONTROL, then maybe it's a TYPEDEF control ' ed, and perhaps the possibility of DISCONNECTING the DEFINITIONS of TYPE kills you.

  (I've recently been thru this in a RTEXE, so it's all fresh for me):

  ( Mystery, error 1003 )

• ProBook 450 G1: Cannot find its Dricver

  After you have installed Windows 10, can't get the audio driver in the driver download page. previously, I was using the IDT audio driver for windows 8.1, now no driver sound for any operating system for my laptop, his link http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5405166&swLangOid=8&swEnvOid=4192

  farukhasan

  install the new driver vom page

  for windows 10 install the new

  HP Support Assistant

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71727.exe

• Acrobat 9 Pro... Distiller / ICC profile problem

  I have loaded Acrobat 9 Pro 3 times and continue to get following error message every time I reboot computer: "Distiller cannot find your ICC profiles.  Please reinstall the software. "Acrobat opens ok but not print or perfom will perform redirection of email as an attachment. Distiller is won't boot.

  Someone at - it a solution?

  Adobe technical support has been more helpful on that.  Start by downloading the update

  Distiller ICC profile files to:

  3790 http://www.Adobe.com/support/downloads/thankyou.jsp?ftpID=4075&FILEID=

  Unzip the file and copy only the files *.icc (without taking into account the subfolders they are-in other words, take the files out of each of the subfolders) in the folder in Windows 7:

  c:\WINDOWS\system32\spool\drivers\color

  These new files will cover probably some old ones.

  This solves the problem for me.

  ---------------------------------------------------------

  It is actually the best solution I found that instead of copy all files for the windows\sys... .icc folder, all you have to do is copy the 3 files of the folder (VideoHD.icc, VideoNTSC.icc and VideoPAL.icc) RGB video.  Once you add these three files to c:\windows\system32\spool\drivers\color, you will be ready to go.

  It seems that it was a mistake on the part of Adobe, there is no reason to include video files for printing.  Nevertheless, the Distiller will search these and return the error of ICC profile, if these files are not present.

• Camera Raw 7 cannot find the camera / lens correction profiles.

  Anyone experienced the same or has a solution? They used to be here, that happened after reinstalling photoshop CS6

  

  'Geen' = None

  ! "Cannot find fitting lens profile automatically.

  Thank you!

  Found!

  Download and install the latest DNG Converter did the trick

• Error - Windows cannot login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly. Unable to log-in to the guest account

  Original title: problem: Guest account does not work even after activation due to profile problems.

  After you activate the guest on this system account tries to log in under this account to fail with the message "Failed to load the user profile". According to the information I found online about this error, I checked HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList to see if a key exists since comments (it isn't). I also checked the Windows application log and found the following entries:

  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\Guest\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you close the session
  • Windows cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm to the C:\Users\TEMP\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm location. This error can be caused by network problems or insufficient security rights.

    DETAIL - access is denied.

  • Windows is unable to login because your profile cannot be loaded. Check that you are connected to the network and that your network is working properly.

    RETAIL - only part of a query ReadProcessMemory or WriteProcessMemory was completed.

  The path of the C:\Users\TEMP does not exist, and the sqm file specified does not deny entries in its ACL, just full control to the SYSTEM, LOCAL SERVICE, my admin account and the Administrators group.

  I'm running Windows 7 Ultimate x 64 edition.

  Christopher S. Charabaruk

  Well guys,.

  The simplest solution is to read what the error.

  "Cannot copy file C:\Users\Default\AppData\Local\Microsoft\Windows Live\SqmApi\SqmData720896_00.sqm"

  I tried a lot of suggestion, but delete the file crazy and that's all working again.

  Beter first remove windows live as well. I only have the first and received the message that something is wong with the installation.

  Hope this has been helpful.

  Commander Paul

• Installation Wizard cannot find the software for samsung technologies, how to solve this problem?

  I'm not very good with computers and what not. I am using media player 10 I think (I have windows xp) and when I plug my samsung reality screan phone to connect to the computer and the computer does not find my device. He tried to download one software called samsung technology something or other, and he says that it cannot find its location. then he said to retaliate if I know where he is, but I don't have a clue as to what it means. Can someone guide me through this with the limited information I gave.

  Hi Grainger,

  We would require the following details to help you best.

  (1) you try to sync your phone to your computer using Windows Media Player?

  (2) did you get an installation as well as the phone disc?

  (3) what is the exact full error message you get with regard to the location?

  (4) did you connect your device with your computer as soon as possible?

  Alternatively, you can contact Samsung support team for assistance. You can contact them on the link below.

  Online Service Center

  https://www.Samsung.com/in/support/main/supportMain.do

  You can check the version of the operating system installed on your computer using the steps below.

  Operating system Windows am I running?

   

  http://Windows.Microsoft.com/en-in/Windows/which-operating-system

  Your answers are important for us to help you with the issue further. Write us with the details asked.

• Because my father died, he left his phone with us. ID or pword is available and now its blocked. Can I reuse and reset or do I throw? Cannot find even the purchase of documents.

  Because my father died, he left his phone with us. ID or pword is available and now its blocked. Can I reuse and reset or do I throw? Cannot find even the purchase of documents.

  If you are unable to prove original owner Apple cannot help you.

• FIREFOX CANNOT FIND MY PROFILE

  OK so I have a weird FF problem where the old installation of FF would not be in service due to a starter kit on the computer of my EU who had been abducted, but broke things endangered. I googled and found the path to the profile of its FF and backed it up to an external HARD drive. Then I reloaded FF on a new installation of Windows 7 the former was borked. I installed FF and then closed, followed the same path and deleted the new default profile and stuck in the past.

  Then I loaded et seq. that never come and but gave me a dialog box saying that it did not find my user profile. I thought: "no prob - I'll try it just a different way." Then uninstalled, FF and re-installed again. Same message, so I followed the path that I let down the profile info on and remove profile information, uninstalled then re-installed FF and guess what? Yes... same message... why I can't get a new copy of work?

  Why is it still ffcrying after that I rinsed the program and reload a new installation?

  You will need to copy the file profiles.ini so to find the Firefox profile.

  • %AppData%\Mozilla\Firefox\Profiles\ < profile >.

  Note that you can use the Profile Manager to create a new profile and click on the button "Choose a folder" and go to the profile copied to make Firefox to use this profile.

  • http://KB.mozillazine.org/Profile_Manager

• Cannot find profile... cannot open recently downloaded thunderbird

  "Download Thunderbird... get the message cannot find profile" and Thunderbird does not open, it shows just the impossible find indicative profile.
  I uninstall, download it again T
  Previously uninstalled download presents in the list of programs (now 3) and I get the same message every time.

  do you have anything in a Thunderbird profile to save? I guess not and this Council will remove completely everything so you can install it again.
  in the type your start %appdata%\roaming press enter menu.

  Delete the Thunderbird folder in the window of windows Explorer that opens
  Re-run the installer of Thunderbird.

• I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. What should I do

  I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. Restarting my computer did not help. Because I had this problem I also noticed that all my favorites that I had copied in Windows Internet Explorer also disappeared. I use Firefox as my main search engine and usually do not use Internet Explorer. I am running Windows 7 on my machine.

  Try this add on the profile folder

• Couldnot load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the file specified using SharePoint Designer 2007

  I have a computer on my network when you open web files WSS 3 in SharePoint Designer 2007, I get the error 'could not load file or assembly 'sorttbls.nlp' or one of its dependencies. The system cannot find the specified file. "I have looked through some forms on the web and have concluded that this is a problem of .NET Framework 2, but I have not managed to solve the problem. He also seems to be keep me to load the Update Services administration console on a workstation by using MMC. Other posts on my network can open/edit SharePoint web site files in SharePoint Designer 2007 without this error and open the Administrative Update Services console withpout errors. I tried a repair on .NET 2. Anyone have any suggestions on another approach to fixing .NET?

  Thanks for your suggestions.

  Jeff

  Hello

  -What is the operating system installed on your computer?

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/sharepointgeneral/threads

• "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

  Hey all,.

  I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

  Hi tripleb316,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747