Distinction of color or icon between searc and private research

Similar Questions

• Color change of values between Illustrator and InDesign

  I have googled and looked here for an answer to my question, but have not been able to find anything.

  I designed several pieces of encumbered asset, all using the same unique color. Some of the pieces I designed in Illustrator and the other in InDesign.

  The problem is, when I copy and paste the yellow color value (if it is RGB or CMYK - I tried both ways), it CHANGES between Illustrator and InDesign. The color stays the same between Illustrator documents, but if I C + P InDesign - or vice versa-, the color value change literally before my eyes. And I don't want to say 'looks like' different, real changes in number.

  Here's a real example:

  Call a box in Illustrator and chose the color #f8f1e0 / 2% 3% 12% 0%. Call a box in InDesign, C + P had the values of color in there, and it DID change the color appropriate for a moment. You click OK. Click New in the color picker and color is now #f8f1e1 / 2% 3% 11% 0%.

  If it is relevant, it seems that the color will change to a slightly darker every time.

  And Yes, the two documents has STARTED OUT as CMYK documents and stayed like that. I also have my color sync via Bridge. I'm working on CC 2015 and all programs are up to date.

  Any idea of what could happen? Thank you in advance.

  ETA: Okay, I just chose preview overprinting in Illustrator and also changed the color of #f8f1e0 to #f8f1e1. I see now this is not a malfunction of the program, but can someone explain WHY this happens? I'm still new to color management and it's quite confusing for me. Thank you once again.

  ETA: thing: when I save the InDesign document to readable PDF and then pull it in Illustrator, the color is now #f8f2e2, even when you preview overprinting.

  Hexadecimal values are RGB color, so if you plug one in the color chart the resulting CMYK values are a conversion of the color management of the profile the document CMYK document RGB profile. You will get different CMYK conversions according to the profile source RGB, CMYK destination profile, intend to color and compensation of the black point used for the conversion.

  In addition the InDesign documents can have colors RGB and CMYK with CMYK and RGB profiles assigned that do not necessarily correspond to the color settings work profiles, in order to sync'ng your color settings may not get everything to match.

  Ultimately if you want to match the CMYK color or nuances between AI and ID, make sure you document assigned CMYK profile matching (Edit > assign profile...) and enter CMYK and hex does not values

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• I want to restore switch between windows and display the desktop icon

  a few days before these two icons was actually on the task bar and now I have deleted how restore it back
  (switch between windows and display the desktop icon)

  Hello

  Copy the new:

  C:\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  To your user account to:

  C:\Users\launch of \AppData\Roaming\Microsoft\Internet Explorer\Quick

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Can someone tell me why I lost all my accurate color between iPhoto and my C8180 All-in-one?

  I was full of pictures from iPhoto printing yesterday and all of a sudden the color accuracy went in the toilet.

  Everything is green and stupid.  It's terrible.  The strange part... it allows to print very well everywhere else.

  This morning, I slipped a photo from iPhoto to the desktop and then print it from there.  Went well.

  I lost something between iPhoto and my C8180 All-in-one printer.  I've never encountered this problem

  front.  I tried all of the suggestions of the printer, but I'm sure that's not the problem.  The printer and

  iPhoto do communicate specifically.  Someone?

  Thanks for the 2 responses I received.  Unfortunately, neither contributed to my problem.  The problem

  was not with my version of OS X or the HP software that has been installed.  As I have explained, this set-up has been

  works perfectly for the last 3-4 years.  With the help of my long-time friend and Mac user many, many

  years, we determined that it was a corrupt iPhoto preferences file.  We have replaced the files preference and

  It works perfectly again.  The problem had nothing to do the printer or it's software.  I am back

  in the business.  Hope this might help someone else.

• Difference between ESA and ACO export of color in Photoshop

  What is the difference between ESA and ACO export of color in Photoshop?

  I want to use these colors in Captivate.

  Thank you.

  This explains the differences: creating and sharing color swatches in Adobe

• Hello! I am a family oriented photographer and have a bit of trouble to keep the colors of files exported between lightroom and photoshop consistent. I edited my images on 5 Lightroom and export TIFF files after ProPhoto color space

  Hello! I am a family oriented photographer and have a bit of trouble to keep the colors of files exported between lightroom and photoshop consistent. I edited my images on 5 Lightroom and export TIFF files after changing color ProPhoto RGB space. Then, I opened a picture at once and changed the settings of Photoshop CC ProPhoto RGB color (under the workspace). When I was editing on photoshop, I tried to export the image, but the colors seemed different, a bit washed out and blue, from the color of the workspace, I was on. I don't know how to solve this problem. Please notify.

  Thank you very much for this! Color sorted

• my color (palette and eye dropper) selecter do work, they show only a shade between black and white!

  my color (palette and eye dropper) selecter do work, they show only a shade between black and white!

  Help, please!

  work with photoshop elements 13

  Windows 7 64 bit

  Thank you

  yyrox wrote:

  my color (palette and eye dropper) selecter do work, they show only a shade between black and white!

  Help, please!

  work with photoshop elements 13

  Windows 7 64 bit

  Thank you

  In the editor, Expert tab, go to Image > Mode and select RGB color

  If that fixed it, go in Edition > Preferences > General and reset preferences, then launch program again.

• How to lock my iPhone 6's screen so it does not move between portrait and landscape?

  How to lock my iPhone 6's screen so it does not move between portrait and landscape?

  Select portrait orientation lock.

  Swipe the top of your home screen to access the control center and select the icon with a lock and an arc around him.

• Browse catalyst prepared - export between inside and outside as in the catalyst?

  Hello world

  Dear people of Sony, is possible to add a feature to export / trasncoding files between In and Out marks only as in catalyst go? Was surprised not to find, very handy when there is a large file that has two or more WB settings required, to export part of the file with the parameters a, marking the section with inside and outside and then adjusting those yet to export the or other parts of the shooting with an another WB settings?

  I know there is a feature to copy sections of the files ' between inside and outside "only but it would have been more convenient to have it as in catalyst browse my humble OPINION."

  Or is there a simpler workflow that I'm missing out on?

  See you soon

  Max

  P.S. Thanks to solve the strange Maj WB problem that I reported earlier, Travis and team, I have since reinstalled catalyst prepare 2015 and in awe of the capabilities of the software. Great job.

  Hi maximdryginsony:

  Thanks for the question.

  I think the function of catalyst to prepare that can solve your problem is a subset of creation. What you can do is put an In/Out point with a WB setting, and then click Log. Create a subclip (see screenshot). This will create a subelement with the color settings.

  

  -Travis

• Bluetooth connection between iPhone and iPad

  My iPhone 6 does not connect to my iPad via bluetooth.

  I previously used the bluetooth connection between my iphone and iPad to connect the iPad to the internet. Despite the two devices were among the recognized bluetooth devices and they were previously linked/partner, it was not possible to establish a connection.

  Perform the actions recommended for repair/reissue apple support - 1. Toggle bluetooth, 2. turn on/off the unit, 3. remove the iPhone/iPad bluetooth connections - 4. Reset network settings - 5. Reset all the settings-, nothing works.

  IPhone/iPad devices isn't even on the list of bluetooth devices available on the iPhone, or iPad. Everything that happens is the animated icon turns all the time.

  Deleting a connection to a device and bluetooth speaker/amp from the pairing of the speaker/amp system process made a new connection.

  iPhone 6:

  Model: MG4F2QN/A

  SN: C31NLG8KG5MR

  Version: 9.2 (13 c 75)

  iPad:

  Model: ME898LL/A

  SN: DLXM42LHFK13

  Version: 9.2 (13 c 75)

  Please give instructions for the previous maintenance work bluetooth connection between iPhone and iPad.

  Thanks in advance

  To use the Hotspot feature (that you described for the connection), you must use the instructions below.

  Share your Internet connection with Personal Hotspot - Apple Support

• (Vista) Is there a PRACTICE way to switch between speakers and analog headset?

  (Vista) Is there a PRACTICE way to switch between speakers and analog headset? Must I ALWAYS return the default setting, depending on which audio output device I want to use?

  We have recently installed Music Maker 16.  Before that, we never had a need for headphones and a microphone.  Now, in trying to use the headphone and microphone - and THEN switch back to speakers - we discover a problem.  Apparently, the only way to do it is to change the audio output device by default EVERY time.

  The dispute with this cannot be more of this.  My son records a beat and singing (with headphone and microphone), and then, play through speakers (so we can all hear), we need to change the default settings.  And back...  There must be a better way!

  Any help would be greatly appreciated.  Please talk layman jargon; I'm not a COMPUTER guru.  Thank you!!!

  Hi AnnieElle,

  You will need to switch between the speakers and the analog device and special value to use as the default device. There is no way to set the device to be used at the same time. You can follow the steps below to switch between the speaker and analog device.

  1. right click on the speaker icon in the taskbar.

  2. click on the playback device.

  3. Select speakers or analog device.

  4. right-click on it and click on set as default device.

  Hope the above information helps.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• All my icons are the icon of iTunes and I don't know how he got that way.

  All my icons are the icon of iTunes and I don't know how he got that way.

  Run a system restore:

  1. Restoration of the system of search in the start menu and press ENTER.
  2. A box will appear. Click on Next >.
  3. Choose a restore point from before the problem started. If the problem started more than 5 days ago, check the boxview more than 5 days restore points and choose the one you need.
  4. Click on Next >.
  5. The selected restore point is listed. If it is correct, clickFinish; If it isn't, press on <> and choose another, and then repeat this step.
  6. A box will appear asking if you are sure you want to run the system restore. If you are sure, clickYes. The process will take between 15 minutes and several hours.

  Note:
  If you receive an error during the restore, boot in safe mode, and it should work fine. (To start in safe mode, restart your PC and press F8 after the screen with the logo of the manufacturer of your PC (BIOS screen) use the arrow keys to select and enter the choice, the option ofSafe Mode .)
  from: http://teengeek.freehostingcloud.com/help/systemrestore/

  If this does not work, try changing the associated programs with each file: http://teengeek.freehostingcloud.com/tutorials/changedefaultprograms/

  teengeek.freehostingcloud.com Microsoft community contributor

• Desktop icons disappear over and over again

  Whenever I turn on my laptop (I have Vista 64) my desktop icons are invisible. I have to right-click, select this option to make the invisible icons (even if they are already), and then repeat the process to choose to make visible again. After that, they reappear and are normal, but sometimes they disappear periodically while the laptop is as well. How can I fix it?

  Was there a time when you did NOT have this problem?
  If Yes, how long?
  If it was not more than 10-15 days ago, you can do a system restore. Choose a date where you did not have this problem as you restore point. Here is the tutorial, where you need:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  If it is not possible to restore the system, please do a check of the file system:
  Here are the step by step to do the checking of the filesystem, sfc/scannow:

  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click on Run As Administrator > in this black and white cmd window, tap the flashing pormpt sfc/scannow > press the ENTER key.
  Note: there is a space between 'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

  See if your desktop icons are now include.

  t-4-2

• How to change laptop screen between landscape and portrait?

  How to change laptop screen between landscape and portrait?

  I have an ACER ASPIRE 5335 running Windows 7 Pro 32 bit and using the Intel Graphics Media Accelerator driver who pointed out that I use the Chipset Intel 4 Series Express.

  I tried the things:

  1: from the keyboard - Ctrl-Alt-Left/Right Arrow (worked with Vista) no change

  2: Control Panel/display/resolution/Advanced Settings - tab Intel -Intel Graphics and Media Control Panel /Options and support/Hotkey Manager - the value of the Hotkey - active (worked with Vista) feature no change

  3: in the notification area - right click Intel display options icon/graphic/rotation - click ' 90 or 270' (worked with Vista) no change

  4: right-click and open Intel Graphics and Media Control Panel /Options and support/Hotkey Manager - the value of the Hotkey - active (worked with Vista) feature no change

  Help please,

  The man from FarAway

  Windows does not include hardware drivers or a screen rotation capabilities.  As your hardware or the hardware driver software does not change, it may indicate that you must reinstall the software, perhaps with a more recent version, you can do it from the manufacturer's website.  Alternatively, because the function doesn't do not part of the Windows operating system, you need to contact Acer support.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!