Distribute spacing. 125 "laps at. 13" also can not set the unit of pets

Similar Questions

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• I tried several times also can not cancel the package Dreamweaver CC.

  I tried several times also can not cancel the package Dreamweaver CC.

  Can I try all thinking to cancel the service plan CC Dreamweaver?

  Contact customer service.

  Contact the customer service

• @ sign is the captial lock + 2 How can I change this - also can not find the sign of the pound sterling

  I had my computer updated and the keyboard acts weird, I know that this can happen, but I can't find where to change it.
  The sign @ is capital lock + 2 and I can not find the sign of the pound sterling.  The dates where the American MM/DD/YY, but I managed to change it, but can not find where to change the keys on the keyboard.  Help would be appreciated.
  Thank you
  Jenny

  Hi JennyBrightwell,

  1. how you accessed the pound sign before on the computer?

  2. where you using a third party program for characters to work?

  3. What keyboard layout you have defined on the computer?

  4. What is the serial number and model of the keyboard?

  5. what you up to date on the computer?

  I suggest that you check if the problem persists when using on screen keyboard on the computer and the post with the result back.

  Keyboard on the screen overview

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/osk_overview.mspx?mfr=true

  Using the character map

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_charmap.mspx?mfr=true

• Problems with the DC Power supply QL 355TP: I can not set the tension level

  Hello

  I'm trying to control a power supply DC via GPIB. The power supply being used is the QL355TP of society Thurlby Thandar Instruments (TTi). There are no drivers of OR to control the instruments, then I need to download and install the driver from the website of TTi: the package I installed is as follows:

  "QL - P power supplies, (including QL Series II) series pilot National instruments (Labview and CVI)"

  and I also installed the following:

  "QL - P power supplies (including QL Series II) series, IVI driver"

  So, my problem is that when I try to use the sample application of the driver 'Volts.vi DC Ouput'; defines a specific level voltage, does not work properly. The application gives no error, but it is not set the specific level voltage. However, other functions work properly, as the measure or activate the output. I tried a lot of things, but I don't know why it does not work.

  I enclose the block diagram of the application and the front panel:

  

  

  I must say that I barely control instruments using Labview and is possible that this problem would be because I did not consider things basic and mandatory.

  Any help is appreciated.

  Thank you.

  p.s. Try to replace the decimal comma to period. It is possible that the driver does not correctly handle the comma.

• Screen black random while restarting the computer after the installation of KB2920189. Also can not uninstall the update.

  Original title: cannot uninstall the recent update... Why?

  I update manuallyas there have been at least 6 updates bad I know for windows 8. A recent update KB2920189 will not uninstall. I mean there is no option to uninstall when I right-click. I installed 5 important updates a few hours ago and whenever I restart my PC now the screen starts to turn black every 1 or 2 seconds. I use an SSD for OS and it is never late like that before. I'm going through the edits, I just installed and cannot uninstall it. is there another way?

  Hi Victor,

  Thanks for the reply with detailed information.

  Have you tried the steps I suggested in the previous post? If this is not the case please try these steps and check if that helps. You can see from the following manufacturers sites to download drivers.

  http://www.GeForce.com/drivers

  http://www.ASUS.com/motherboards/P8Z77V_LX/HelpDesk_Download/

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Can not set the print properties

  Just loaded FireFox 4.0.1
  When I click on
  file
  print
  and the print window opens if I click
  Properties to define the quality or black etc. only I get
  an error box that says:
  Error
  Prop Res DLL not loaded

  I tried exactly the same thing using Windows internet explore and the Word for windows, and these all are working
  perfectly. I can click Properties in the print window and
  the value of what I want on my printer.

  I rebooted and no help.

  I'm about to go back to the previous version of Firefox
  Since I print a lot of websites and I often
  you want to set the print mode project to save time and ink.

  Can you offer any suggestions other than coming back
  the earlier version?
  Thank you!
  KyDan
  Louisville KY

  This seems to be a problem for a long time with the Lexmark printers who has just started to happen in Firefox 4.

  An example
  
  http://forums.techarena.in/MS-Office-support/596409.htm

  This Google search.

  Check out this thread for support for a solution that has worked in 2006 for a similar problem with another Lexmark printer. I hope that something like this will work for you.

• Can not set the options/security / "remember passwords box" it is off I guess?

  passwords box is 'grey '.

  also I can no longer go back a screen by clicking the arrow to the left on the line that has the http address
  who just started so I need new updated? IM on 19.0.1

  Make sure that you are not Firefox running in (permanent) private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing
  • Tools > Options > Privacy: use the custom settings for history
  • Uncheck the box: [] "always use the navigation mode private.

  If you use the software Norton then see:

  • http://community.Norton.com/T5/Norton-toolbar-Norton-identity/NIS-2013-Norton-toolbar-unselects-Firefox-remember-passwords/TD-p/836598

• Satellite C870 - 19L can not set the correct resolution

  I have a new laptop and my problem is that the maximum resolution that can be adjusted is 1366 x 768, although the screen has a resolution of 1600 x 900. The problem is, that only 80% of the desktop is displayed, the area to the right is not displayed.

  I couldn't find an .inf file in the download section.

  What can I do?

  In Notepad, specification is clearly written that your laptop comes with preinstalled Win8 64 bit and this preinstalled OS (recovery image) contains the right display driver. Default factory settings resolution must be set to the native display resolution.

  The question is: you use this original preinstalled operating system and if not what exactly do you do?

• BlackBerry smartphones can not set the homepage on the Bold 9700, non editable field

  When I followed the instructions to reset the home page of the browser to the URL of my choice, I'm stuck.  It says choose Options, Configuration of the browser, and then type a new URL in the Home Page field.  Seems pretty easy.  But this field is not editable.  It is stuck on the first URL I've ever used on the device.

  Any ideas, anyone?

  Well, tweak, I tripped on the fix.  In the right corner is a field indicating the browser that you are cinfiguring.  If If you launched Setup breast to Internet, then it is already set to 'Internet browser' of course. However, change to something else temporarily (for example, MediaNet), then again the browser Internet... Presto!  The URL of the homepage field becomes editable - and also a 'current user' button appears to exist.  Hooray!

• Can not change the units of time in the timeline display, how is it?

  Hello

  I have a project with several chronologies and many clips (which are all conversions for 8mm film).

  The clips are all ProRes to 23.976 fps/720 p or 1080 p/29,94 fps (two different places did the conversions for me and each have their own workflow)

  I did separate timelines 23.976 fps/720 p and 1080 p/29,94 fps and did my best to keep the separate formats.

  In my 720 p/24 fps timeline (that I created by dragging an item to the icon of 'New element') if I right click on the time in the upper left corner of the timeline of the sequence I can choose between:

  24 fps timecode

  No offset 30 fps timecode

  Feet & frames 16mm

  Feet & frames 35mm

  Frames

  My only option is 'Frames' (be it by right clicking on the time or through the sequence settings) within my 1080 p/29,94 fps timeline

  Anyone have idea what I am doing wrong?  It's just much easier for my brain to work with time...

  Thanks for all the tips!

  -Mike

  Here is a screenshot

  

  Just make a new sequence with the correct settings.

  Copy old sequence of new sequence footage.

• I use hp eprint and that you can not set the e-mail account. Should what settings I use for the Description, host name, Port and use SSL?

  I downloaded hp eprint app and you cannot configure e-mail account

  I suggest you ask on a forum of HP. It's nothing to do with Thunderbird, as the eprint software connects directly to your email provider that I see.

  Maybe this will help http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Cant-find-my-computer-eprint-email-address/td-p/680697.

• I downloaded the colored tabs, but I can not set the color of the 'new' tab for a blank page. Is there a code I need for the field with a blank page?

  all my tabs are now configured the correct colors except when I open a new tab. Is it possible for me to put the new tab to a specific color? I prefer the new tab to open a blank page (no url address). Is there a code in the definition of the color options for the colorful tabs?

  You are welcome.

  Could you please click the button "solved it? This will help others looking for a solution to the issue.

  Thank you.

• can not set the resolution of the screen because of the low resolution and can not click on apply

  When I turned on this morning all of the screens were above the waist.

  I tried to adjust the screen resolutions, but the apply button was below the bottom of the screen. All screens are above the waist

  Concerning

  Don

  When I turned on this morning all of the screens were above the waist.

  I tried to adjust the screen resolutions, but the apply button was below the bottom of the screen. All screens are above the waist

  Concerning

  Don

  Use the Enter key.

  It works the same apply and OK buttons.

• BlackBerry smartphones can not see the maps on my "BOLD"?

  Hello

  I just theBold on Orange in the United Kingdom and I do not see the maps app anywhere.  I can see it listed as version 4.6.0 under the list of Applications but can not see the software somewhere?

  I'm mean't to enable it somehow?  Also can not get the GPS function works as it says "failed to update GPS location" when I click on refresh?

  Any help would be really welcome

  If your provider blocks the passage of the icon (like AT & T) to another theme (Options-> themes) and see if you can find it. You may also download. Check mobile.blackberry.com from your BB browser.