Div always goes under the other!

Similar Questions

• How to assign values to the fields (topic-one under the other) in multiple output forms (cursor)?

  Hi all

  I have a form that has text_field columns below, from the RECEIVED_FORM_15G table. This table is empty.

  (1) CUST_CODE with 1 line item. (Number of items displayed = 1)

  (2) ACCT_FD_NO with 10 line items. (Number of displayed items = 10)

  There is more than 1 ACCT_FD_NO to 1 CUST_CODE.

  When I enter the CUST_CODE and press tab, all ACCT_FD_NO values should appear. I take values in another table called KEC_FDACCT_MSTR ACCT_FD_NO

  and in the ACCT_FD_NO, one under the other (topic). So I put in the following code:

  BEGIN

  PREMIER_ENREGISTREMENT;

  FOR CUR_R IN (SELECT ACCT_FD_NO FROM KEC_FDACCT_MSTR WHERE STAUS = 'E' AND ACCT_CUST_CODE =: CUST_CODE)

  LOOP

  NEXT_RECORD;

  : ACCT_FD_NO: = CUR_R.ACCT_FD_NO;

  END LOOP;

  END;

  But the problem is that I'm not able to view the value captured in the next consecutive line items.

  It appears in the first and second line item only.

  The first value gets displayed in the first column, then the cursor moves to the first line item in the second line of command,

  the second value is shown in the second line of billing, (it's because of NEXT_RECORD in my code)

  more later all the values displayed in the second line item only. (I checked with message call.)

  I want it to display one under the other.

  The problem is that the cursor does not move to the third line item after the second line item.

  If the remaining values gets displayed in the second line item only.

  So what is the problem in my code?

  Where should I put the next_record to move the cursor from one line to the next line item item IE the second line item to the third line item

  & the third line item in the fourth line of billing and so on...  Please let me know.

  Thank you.

  Is Oracle Designer 6i

  Oracle 9i.

  The above code is just...

  The only error was in the palette property of CUST_CODE, 'required' was not set to 'Yes'.

  So after the setting for the 'YES', this has worked perfectly well.

• I want to max my screen to be able to see the images in the messages. The ' to, subject, to and BCC occupy 25% of the screen - one under the other.

  When I view a message it is a title showing the ' to, subject, to and Bcc' message under each other in a group which occupies about 25% of the screen. This prevent me to see a complete picture of the message. Can not change this option for do not show this information at all because it is used to occupy a large part of the screen?

  Not being able to increase the resolution will mean less can be displayed, but obviously, it is a personal thing and you should be able to see the screen comfortably.

  However, I noticed your picture looks like quite like mine, although similar.

  The pale blue bar at the top of the tab should display icons "Mail Toolbar" which does not appear in your screenshot.
  It should have these buttons or icons for example: get Messages, write, address book, Menu icon and research.
  If it has been disabled, then the pale blue box would not be showing. Thus, it is a query.

  Q: do you have 'tailor-made' bar messaging tools to remove the icons from buttons?
  Customization allows you do drag icons on and off the e-mail toolbar. Do you have this is thinking he might save you space, but in fact you still have the domain - the mail toolbar, but it is now empty?
  If you have removed them in order to create a space, I would say that you put all the icons back, so that they are available. It is easier to hide the view by disabling the e-mail toolbar.

  View > toolbars > mail toolbar
  Q: is the messaging on or off toolbar?

  Disabling should you save space by deleting the pale blue box above, but it still won't create the kind of space you're talking about. Baring in mind that each image can be a different size.

  The area with of, subject, to and Bcc, should also show several buttons for example: answer, before, Archive, Junk, Delete and another button called 'other Actions '. These buttons appear on the right side. Maybe you have them, but they cropped in the displayed image.
  If the area to which you refer has done more than just the titles. It also offers you a way to click on for example; Respond directly from the email that you look.

  What version of Thunderbird do you use?

  Have you tried the 'Conversations' addon because this will reduce the headers?

  There is also another Addon called "Headers Compact" will be also reduced the size of the headers:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/compactheader/

  But you are only going to win some space which cannot result will be enough to see the large embedded images.

        -------------------------------------
  

  The person who transmits the image should really be sending these images in the form of attachments, so that you can choose to view by using the correct application of the program and/or reduce the size of the screen if they are incorporating the image in the content.

  If they refuse to send the image properly and persist in sending large embedded images, then you may not be able to see full images without scrolling you have no control over how they sent the image; It could be small or huge, which will affect the ability to view an image all at once.

  For large images nested:
  The best option for you would be to right click on the image and use "save image under" choose to save the image to your computer in a right example folder: Photos. Then open and view them using an appropriate such as "Windows photo Gallery" or similar application.
  So if you choose to delete the email you don't waste the image she's saved elsewhere on your computer.

• Reactivation of the EZ always goes to the Wakeup EZ settings screen after waking up

  Hello - I have an Iconia 10 "and I like the EZ Wakup function, but when I wake the tablet with 5 fingers he always goes to reactivation of the EZ settings screen - I would like to go directly to the home screen once I wake the Tablet, how can I do this? Thank you.

  Please check in the app defaults to the option to disable to open when the rest of the shelf upward.

  http://Acer.custhelp.com/app/answers/detail/A_ID/11345#_ga=1.219386010.263337500.1415824428

  http://Acer.custhelp.com/app/answers/detail/A_ID/8615/related/1

• Windows 8 filehistory always goes to the local disk

  I had my windows configuration 8 SL 64 bit to instant filehistory \\myrouter\mydisk\filehistory

  but when run the backup always goes on local drive instead

  C:\Users\Administrator\AppData\Local\Microsoft\Windows\FileHistory

  and the filehistory in the just network drive left blank

  What is the problem?

  

  Hi AmeerRadhi,

  This problem may occur if the history file drive has been disconnected for too long. To continue registration of copies of your files, you will need to reconnect to your history file drive and reselect your network. You can start a backup manually, or wait for the next scheduled backup.

  To manually start a backup

   

  1. Open history file by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), enter the parameters of the file history in the area of research and then by typing or clicking on the file history settings.
  2. Press or click back until now.

  You can consult the help article and check if it helps:

  What happens if something is wrong in the history of the files?

  http://Windows.Microsoft.com/en-CA/Windows-8/what-something-goes-wrong-file-history

  Set up a drive to history file

  http://Windows.Microsoft.com/en-CA/Windows-8/set-drive-file-history

  You can also look at the similar thread: http://answers.microsoft.com/en-us/windows/forum/windows_8-files/windows-8-pro-file-history-data-folder-empty-user/d0faeafe-0d2c-488c-984d-f08b9826d362

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• HTML5 animation always appears on the other contained

  I've created an animation on board animate and imported into Captivate 8. I tried to put on a blade of mater and directly on a slide in the Filmstrip. It always jumps on top of the other content of the slide when I saw in a browser, even if it is on the bottom of the stacking order in the layers on a slide in the Filmstrip. If I place it on a slide master, the same problem occurs, even though I have the "Master drag objects On Top" unchecked.

  Why? Is there any solution for this?

  This has always been the case for all animations, they are on top of the stack (ditto for the interactions of training). Sorry, it's the 'design', I can't offer you a work around.

  As for edge to animate, you can use transparency to at least have the transparent background.

• Newbie here... Put two side by side logo and one caption under the other

  Hello

  It has been a few days learn how to buid a site using css. I want to add two logos (png format) in my header div side by side and add a caption under the second logo located on the right and also I would like to place the second bit of lower than the first logo logo.

  This is the style of the #header div I created

  #header {}

  Width: 980px;

  height: 181px;

  margin: 0 auto;

  margin-left: 20px;

  padding-left: 15px;

  background: url(images/img02.jpg) no-repeat left top;

  }

  Here, I have created two more div for two logos and what on the legend.

  I want the result something like this

  Use text-align center:

  #logoRight p {}

  text-align: center;

  }

• CSS3 drop-down submenu goes under the animation

  Hello

  I've created a banner is there under a menu. In the menu, there is a menu drop-down part and when I select this submenu go under the animation so it is hidden and not visible. How can I keep it on top of the animation?

  Hi Mandi8,

  You can just try the following: -.

  Open your css file in any editor and z-index higher value for element ul say 1

  for example: -.

  UL {}

  z-index: 1;

  }

  It worked for me, hope it works for you also.

  Thank you

  Sliman

• Windows vista does not open and goes to the other user that does not exist

  I try to open to all modes goes directly to any other user who has never been assigned a password. Now Icant open workstation to all the .whassup

  Hello

  1. don't you make changes on the computer until the problem started?
  2. how many accounts do you have on the computer?
  3 have you tried to start the computer in Safe Mode?

  If you are unable to start the computer in safe mode, and then try to run a system restore from the System Recovery Options menu.

  See these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• When you search something on amazon or ebay the top row always goes to the far right of the screen.

  So, when I look at something like 'shoes' in the amazon search box the top row of items flying over on the far right. And most is no longer even on my screen

  I checked on I.E. and I had no problem with that, then I guess it's a firefox issue.

  Try the Firefox Safe Mode to see how it works there. Safe mode is a troubleshooting mode, which disables most of the modules.
  

  (If you use it, switch to the default theme).

  • You can open the Mode without failure of Firefox 4.0 + holding the key SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the menu option help and click on the restart with the disabled... modules menu item while Firefox is running.

  Do not choose anything at the moment, just use "" boot mode safe. "
  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.
  If it's good in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one.

  To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

• CTRL + 1 to zoom to actual size always goes to the center of the Web

  Hey guys, is possible to change the behavior of the zoom to real size, so he won't go until the middle of the canvas every time? When I'm working I'm going to zoom out to see something but want to hit CTRL + 1 to zoom back to the display of 100%, but in the place where I'm working, not in the middle of the canvas where Im not working do not. Is there a way to change this?

  https://helpx.Adobe.com/Illustrator/using/viewing-artwork.html#use_multiple_windows_and_vi ews

• in my div content goes beyond the width

  I created a < div > to put my main content.  I've given a width of 810px.  However when I hit a very long line of text in the < div > tag then it isn't autowrapping the text to the next line when it exceeds a width of 810 px.  What could be the problem?  It creates even a scrolling horizontal bar when I saw the long line in a web browser.

  Here is the CSS for my content < div >

  #outerWrapper #contentWrapper #content_bigbody {}

  float: left;

  Width: 810px;

  background-color: #FFFFFF;

  min-height: 690px;

  -moz-border-radius: 8px;

  -webkit-border-radius: 8px;

  border-radius: 8px;

  border-radius: 8px;

  box-shadow: 5px 5px 5px #6d6e70;

  padding: 10px;

  do-family: Arial, Helvetica, without serif.

  font size: 13px;

  top of the margin: 15px;

  margin-bottom: 15px;

  margin left: 15px;

  }

  Try to add to your CSS:

  dressing: break-Word;

• Unable to get the content div to expand under the last tag div

  Again, I ask for help for my site www.acemon.com

  I can't get content to exceed the last div. When you look at the site, you can see the last box (titled "to the real estate agents") is surrounded by the color of .container instead of color content.

  You have an extra div to click here and clickhere2:

  Premium.html">."

  Click-images/sample.png"alt ="Value2"width ="150"height ="50"/ >

  value.html">."

  Click-images/realtor.png"alt ="Real Estate Agents"width ="152"height ="50"/ >

  Then, replace:

  with this at the bottom:

  that is to put the DIV outside comments.

  It must then validate.

• One of my sites always connects, but the other becomes had an ftp error cannot connect to the host.

  My problem is in "connect to remote server". I manage two sites in Dreamweaver CS6, and they are hosted by the same guy.  A site still connects fine, but it stopped connecting. With the second site when I click the button I get a delay then "an ftp error occurred - cannot establish a connection to the host".

  However, I can still access the second server in the remote site through an FTP program and support host confirms that my connection works very well from his computer.

  I tried to do with the old stuff (1) Site > Manage Sites > export to create an .ste file (2) completely, restart the management of Sites (3) > import the .ste file (4) click on connect to the remote server - But that made no difference

  The two sites are hosted by the same company does not mean that they are on the same physical server.  Your connection problem may be due to many things.

  • Username and password may have changed or been reset.
  • Server permissions problems (GoDaddy is known for this).
  • IP blocking.
  • Server is down.
  • etc...

  Are you able to connect with an FTP 3rd party like FileZilla client?  If this isn't the case, I guess it's a server problem & you will need to contact your host.

  Nancy O.

• Paint on the layer in Photoshop with lighter color makes the color paint more light go under the darker colors? How can I fix it?

  I have Photoshop CC

  When I use paint tool to paint on lighter colors on a layer, it always goes under the colors darker on the same layer. Even if I paint the darker color first and the lighter color, second, the lightest color continues to go under the darker color. And it's all happening on the same layer too! It's like photoshop is to order the colors based on what color goes on top and what colors light up and down in the order how dark the color is.

  How can I do so that the color that I finally painted goes on top?

  See the blending mode in the Toolbar Options paint is set to Normal.  There is a parameter 'Behind' who will actually do what you describe.

  Also check your layers panel blend modes and settings for each layer.  Maybe not relevant in the present case, but recommended when the strange behavior happens in the layers.

  Gene