DLL of enforcement, error loading

Similar Questions

• RunDLL error loading C://ProgramData/nafugizu/nafugizu.dll and RunDll error loading C://ProgramData/wakemoza/wakemoza.dll start up

  Whenever I start my computer, I get error messages saying that the module could not be found, looked online to try to find that solution did not find much. Im not very savvy computer so not sure what to do next. A ran Norton full scan and came up with nothing.

  Hello ArmyWife09, welcome.

  These files are almost certainly infections. I would recommend following these steps:

  STEPS TO PREPARE THE SYSTEM FOR A CLEAN BOOT CLEANING AND MALICIOUS SOFTWARE
   
  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. click on the 'Startup' tab at the top
  4. click the "Disable all" button at the bottom and click on apply
  5 restart your computer

  6. Once restarted, download the following:

  http://download.CNET.com/Malwarebytes-anti-malware/3000-8022_4-10804572.html

  7. Once downloaded, install MalwareBytes and run a full scan of the system. Restart
  Afterwords.

  From this point, your machine must be clean of the infection.

  Let us know how it goes,

  Thank you!

• Error loading C:\Users\Richard\AppData\Local\Temp\cerdr.dll. The specified module could not be found

  The PC boot-to top every morning, I get this message. Can I please ask for some advice on how I can solve this problem, thank you.

  Hello LewBut,

  I'd say go throught he link below and try the suggestions of the SpiritX MS MVP.  How long have you encountered this message when you start your computer?

  Error loading C:\...".dll" the specified module is not found.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-loading-CDLL-the-specified-module-could-not/c21f0647-98EA-4170-9fca-90b5fcc5273a

  In addition,

  DLL of enforcement, error loading

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/run-dll-error-loading/02dbc0c6-fed0-4B7E-97ab-1245e9f43939

  Thank you

  James

• Error loading C:\Users\Herb\AppData\Roaming\rvfet.dll AND load C:\Users\Herb\AppData\Roaming\usdms.dll error

  When I start my PC I get two dialog boxes with messages

  Error loading C:\Users\Herb\AppData\Roaming\usdms.dll
  AND

  Error loading C:\Users\Herb\AppData\Roaming\rvfet.dll

  It seems that some program trying to load at startup and can not find anything.

  Once I close the dialog windows everything works fine.

  Any ideas?

  Herb

  Hello

  Google has little information on this subject, it seems to be a left on the shape of the boot entry Malware that has been removed from your security programs.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the problem persists after scanning, take these startup entries:

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

• Windows XP starts, an error message appears. 'RUNDLL error loading C:\Windows\ihukuqej.dll'. The module specific cound not be found.

  Original title: Windows Rundll error on startup

  My laptop, Windows XP startup, an error message appears. RUNDLL error loading C:\Windows\ihukuqej.dll.  The module specific cound not be found.  I downloaded ParetoLogic PC Health, did a full scan on the registry and fixed all of them, rebooted and its still there.

  What is a rundll error?

  File rundll.exe are processes systems directly connected to your computer Windows registry. All of the Dll files are a part of the vast library that contains code and data that are shared by many programs. This allows to obtain the effectiveness of speed and memory of your operating system by reusing the same code or file to run many functions of various programs. An error occurs when the program are not allowed to access this code.

  Why do you Rundll errors?

  Windows uses rundll files to load programs, files, and applications. If the dll file is missing or damaged, any application using this file cannot be loaded. This will produce a rundll error. The reason why the file has disappeared is often related to a virus or spyware. This type of malware often tries to divert the files shared by the rundll file. Other sharing programs file then do not work effectively or to load any.

  STEP 1: IDENTIFY

  The first thing you need to do is to identify the process specific rundll. This isn't a difficult task; There is a library online extensive process in which you can assess the validity of the process that is running. When the error dialog box opens, it displays the name of the process. For example, if the dialog box appears and tells you the dll error:

  STEP 2: STOP THE PROCESS

  Often, you can locate the Dll of enforcement in the services of the exe. You can open your services configuration by following the instructions below:
  1. open your Start menu.
  2. click on run
  3. in the command screen type:services.msc
  4. This will bring to the top of the window Management of the Services . If you drag the mouse to one of the services. It will give you a detailed explanation of the service in question. By right-clicking the individual service.
  5.stop the "dll" service immediately.

  NOTE: sometimes the dll process can not be stopped by this method.

  

  STEP 3: CHECK FOR AND REMOVE

  You need to open your Windows registry file system. It is an extremely delicate process. The registry key: HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  This action will help you speed up the considerable load time of your applications. Here's how:

  1. click on Start
  2. click on run
  3. type regedit
  4. find this registry key:
  HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > RUN

  5. in the right section click on: "rusvdgpo" = "%System%undll32.exe % System%usvdgpo.dll, [RANDOM LETTERS].
  6. delete the value and reboot.

  

  SPECIAL REMARKS

  Rundll.exe is a critical system process. However, there a great vulnerability is back, which makes it more prone to malicious purposes by an attacker allowing access to your computer from remote locations, stealing passwords, personal data and Internet banking.

  The Trojans are usually use this attack method to share a process that invites the other malware be more Trojan horses or other forms of spyware. The best defense is to keep your security up-to-date software and explain the process of rundll on your computer.

  ======================

  More information is a lot to explain and resolve the problem.

  Since it is a painful process for beginners, it is best to create a new user account and remove the error causing the user account.

  Because not only it solves problems, there will be new user settings and the program files needed for the user account.

  Once you are in the new user account, you can scan by using a program that synchronize with the server and check for virus/malware/spyware.

  Here is the link.

  Run hitman pro 3.5

  http://www.SurfRight.nl/en/downloads

• Error loading C;\users\Toshiba\appData\Local\SMBDP.dll

  Can someone help me?
  Once I start, I get a message that says: error loading C;\users\Toshiba\appData\Local\SMBDP.dll, then the module is not found.
  I tried everything but can't get rid of it,

  I asked for help online, but he told me to buy a tune-up utilities, but I already have untilities tune-up and have run through completely but it always does'nt work.

  Help, please.

  Hello

  TO be honest, this file is unknown to me. I searched using Google, but I couldn't find anything :(

  You can try a system restore to an earlier point or what have you done since you got this error message?

• displ1.dll error loading of worksheet

  Just before a work critical time that we started getting an error loading Dasylab 10.0.3 spreadsheets.  It was one of those things "windows has encountered an error and needs to close."  Looking at the details it is said that the problem was with displ1.dll.

  He is our saved records unusable because they could no longer be loaded into Dasylab without the occurrence of the accident.

  I finally got around the problem of removal of displ1.dll in the folder \windows\program files\dasylab 10 then run Dasylab.

  This allowed me to open our existing worksheets, but with a red cross on modules as required displ1.dll - including the table of yt and the list.  If I deleted these modules, I could at least save and reuse the leaves of calculation (but without our list and graphical views).

  My quick workaround solution had to then restore displ1.dll and reload Dasylab.  I could now open my old worksheets - because they had none of the modules requiring a displ1.dll in them.  Before my acquisition of data, I could then manually add the table yt and the list shows and then begin the work.  No problem as long as I did not save the worksheet with a list or table of yt - if I do so then I would get the same error as previously not described.  So with a short time (a few hours) I came with a 75% on solution work that required minimum re - work whenever we wanted to use the spreadsheet.

  Has anyone encountered this problem before and why is this happeneing?

  In my initial confusion, I uninstalled Dasylab then re-installed as 10.0.1 to see what would happen.  Still received the error of displ1.dll.  Then I applied SP2 to resume installation to 10.0.3 and it still doesn't work.  I note that there is a new version of displ1.dll in SP2.

  We used 10 Dasylab for several years with the same hardware DAQ (IOtech Wavebooks) for several years now without any problem - how is this problem appeared seemingly from nowhere?

  Andy Phillips

  OK... my research says that the bug you described is fixed in V10.0.3.

  Then, go towww.mccdaq.com and ask for support. Please indicate in the text that CJ has asked you to do, so that they will assign it to me.

  I have the following of you:

  -copy of the worksheet

  -the list of the DAQ hardware used by the worksheet

  -l' help-> report of DASYLab

  I need to check that you did not find a new unique bug...

• Error loading lvdaq.dll

  Hello forum of Discussion of LabView.

  I am currently using LabView 2009. My Research Director has tried to open the files inherited from Labview 7.1 on the more modern version, without success. After doing a little research, I found that I had to download traditional DAQ in order to get the latest version of LabView to open the older file. First, I downloaded the DAQ for 7.4.1 and installed with setup.exe, after which I tried to open the program. I got the «error loading lvdaq.dll...» Error in initialization failed". I then downloaded 7.4.4, thinking that maybe it would be a better version. Same mistake. I'm now downloading version 7.1 (a previous DAQ inherited), thinking that maybe the version numbers should equal to the origin of the old Legacy DAQ file I have to run it. I hope that it will work (and if that's the case I'll just delete my post), however if it isn't, I'll update my post and I hope to help to know what to do.

  Thank you in advance for any help.

  
  

• How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  How to erase or correct an error loading RUNDLL that keeps Poppin ' up C:\ProgramFiles\ParetoLogic UUS2\USS.dll the specified module could not be found... error?

  Hello

  Here is some information on this problem.

  The information contained in the link suggest you delete a scheduled entry, if it exists:

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/

  You can also use this program (FREE Autoruns) to find:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Error loading C:\windows\iambcex.dll error codes

  Original title: error codes
  On my pc, I have not been able to obtain the nywhere.  When I open windows I get two error messages:
  Error loading C:\windows\iambcex.dll
  Error loading C:\windows\iyigexindoduse.dll

  A google search produces no results. This suggests that the relics of an incompletely removed malware or malicious software.

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• Whenever I reboot I get the following message: error loading C:\windows\claprv.dll

  Whenever I reboot I get the following message:

  Error loading C:\windows\claprv.dll

  the specified module could not be found

  What does that mean?  The only thing that I found online, it is that it can be associated with some malware?

  Any ideas?

  Hello, Rojo97,

  You have something to do with skiing?  This site uses claprv.htm.  You will get a 404 error page not found but the site is active.

  http://www.Sloski.SI/resources/files/PDF/alpsko-smucanje/04-05/FIS/alp_claprv.htm

  Have you added new software to your system recently?

  Download Microsoft malicious software removal tool run a complete analysis

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

• Error loading lvanlys.dll

  Hi all

  2 days ago my PC starts to send this message: error loading lvanlys.dll. Inavalid access to memory location. I use winidows 7 and LabView 2010.

  To fix that I do every thing and finally I reinstall windows and labview, but nothing change. I need your advice.

  Thank you.

  Ah. Ok. Hey, I have the same machine!

  It's quite extraordinary material and you should probably mention that.

  There is a bug in the old intel MKL library of known on machines with many cores. Are you really sure it worked before on this same machine with the same version of LabVIEW?

  You should probably update LabVIEW to make it work correctly with 32 virtual cores. This is an old discussion.

  See also my report here. If you disable hyperthreading in the bios, things should work. Would be - that you had it disabled before?

• I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  I get the rundll error "error loading C:\WINDOWS\system32\vcnflrd.dll the specified module is not found."
  I have Windows XP Professional, I installed Windows 7 and windows 8 and windows defender and avast antivirus scan and complete.  I did a full cleaning.

  Thank you

  Hello

  you are fully updated? This means that the module cannot be found, what you want to do when you get this error? error codes >?

  check the reports on the problems and solutions

  You can do a support ticket, follow the link

  http://support.Microsoft.com/common/international.aspx?RDPATH=DM;en-us; Select & Target = support

  Microsoft product support has some tools that will be useful and can help to find a solution

  have a great day with OneCare Scan + 50 tips Windows 7even infected with the center of privacy? DELETE this Blog search & response threat Sysinternals Live Tools + TRANSLATOR+ Photosynth + Microsoft Security + Microsoft SUPPORT + Of Live Labs PIVOT + Microsoft Live Labs + Office 2010 beta + get Windows LIVE!

• I get 'error loading '... C:\ProgramFiles\CommonFiles\ParetoLogic\UUS2\UUS.dll... The specified module is not found .___How can I fix it?

  I get 'error loading '... C:\ProgramFiles\CommonFiles\ParetoLogic\UUS2\UUS.dll... The specified module could not be found.

  How can I fix it?

  http://www.utilitysoftwarereviews.com/how-to-remove-ParetoLogic-uusdll-error-message/ MS - MVP - Elephant Boy computers - don't panic!

• Marketing, Windows XP displays "error loading msinuc32.dll specified module could not be found.

  While starting up, Windows XP displays "Error loading msinuc32.dll specified module could not be found" help me solve

  Hi Rahmansherif,

  ·         Did you do changes on the computer before the show?

  Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.