Do I have to close the 'context of the sequence' in Labview?

Similar Questions

• Everyone is having a problem with only being able to do a Google search and then nothing after that. I have to close the browser and reopen it to each search

  Since the upgrade to 12.0, I am only able to do a Google search. After the initial search, nothing happens when you try to make another. I have to close the browser and reopen it to each search. Any ideas.

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker.

  A few other basic problems you can try things is the following:
  Run all Windows updates, install all required service packs, etc.

  Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell

  I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance

  original title: where to find WIndows Poweershell?

  Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.

• FSS.dat has stopped working and I have to close the program

  I get a message that fss.dat has stopped working and I have to close the program by the message box, this happens quite often how to solve this problem

  Maybe this post help

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-message-fssdat-program-is-not-working-and/eadcf204-22d9-4DB9-9660-a8720d1b9211

• Whenever I open a creative cloud application adobe (such as Photoshop, Flash, AfterEffects etc.) it takes so long to open, and then after a few seconds, it freezes and I have to close the application ("force quit"). What happens here? Th

  Whenever I open a creative cloud application adobe (such as Photoshop, Flash, AfterEffects etc.) it takes so long to open, and then after a few seconds, it freezes and I have to close the application ("force quit"). What happens here? Thank you

  If it's all programs of cc,

  Uninstall (properly using the uninstall programs) all cc

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud and use the app to install your programs of cc.

  If it's only some programs of cc who are broken, reset their preferences-

  Acrobat: https://forums.adobe.com/thread/1595848?start=0&tstart=0

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  hearing: https://forums.adobe.com/thread/1079494

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InCopy: https://forums.adobe.com/thread/526990

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• I'm trying to download CS6, I get a window that says I have to close the bridge. Bridge is not open

  I can't download CS6 because I get a window appear saying that I have to close the bridge. The bridge is already closed. How to do this? I have to remove the bridge completely from my computer?

  Thanks for the help.

  Hi Jeni.lyn,

  Open the Task Manager / go to process and search of Bridge.exe task and end: http://windows.microsoft.com/en-in/windows7/open-task-manager .

  Kind regards

  Romit Sinha

• I have a dell inspiron 1525, the screen goes black every few minutes. I have to close the lid and open it to make the screen come back. any ideas?

  Screen goes black every few minutes. have to close and open cover return the screen.

  Hello

  1. on what application is the problem occur?
  2. the hard drive spin when your screen goes black?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  I suggest that you update your display drivers and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Step 2:

  Test the issue in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 3:
   
  If your computer works fine in safe mode, then there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

• I use LR on my PC, Windows 8.0.  Recently encountered a problem where I can't access one of my LR catalogs.  The LR error message tells me that another application is using the file.  I have to close the "another version" of LR, then restart.

  I use LR 6 on my PC, Windows 8.0.  Recently encountered a problem where I can't access onof my LR catalogs.  The LR error message says that the book is opened in another application.  Close the "another version" of LR, then again to open the catalog.  I find it a different version of LR running on my PC.  ????

  In the same folder that your catalog file is a file whose name ends with .lock

  Delete this .lock file

  DO NOT REMOVE ANYTHING ELSE

• How is it when I click on the buttons to exit, or the new tab open or any other button button are not repsond? I have to close the program down to get a new page.

  I can't get anything to respond when I click on the buttons. I can't go out the window, the back or forward buttons are unresponsive ect... I have to get out of the whole thins just to get a new page. I have uninstalled several times but it didn't seem to help.

  Hello

  Please check if this occurs in Safe Mode

  Extensions of the issues

  Troubleshooting Extensions and themes

  Uninstalling the modules

  Uninstalling toolbars

• How do I close the message of faces by programming

  Hi all
  I'm working on Jdeveloper 11.1.1.5 and I show faces messages conditionally in my form on key press F4. :-
  The idcomp is the component of Id that I'm passing javascript on key press F4.
  
  {} public void displayMessage (entry from list < ErrorDetail >)
  bussLogic (input);
  List < ClassB > classBList = getDescBasedOnId (idcomp);
  for (ClassB classB: classBList) {}
  
  FacesMessage fm = new FacesMessage (classB.getErrorDescription ());
  fm.setSeverity (FacesMessage.SEVERITY_ERROR);
  
  FacesContext context = FacesContext.getCurrentInstance ();
  context.addMessage (null, fm);
  
  }
  Now, I have to close the message press F8 key. I am able to show the error on the F4, but how do I close the message of faces? Is there a method to achieve this?
  Please suggest!
  Thank you.

  "The use of JavaScript to clear validation error messages" on page 14 of http://www.oracle.com/technetwork/developer-tools/adf/learnmore/nov2010-otn-harvest-190744.pdf

  Timo

• When 29 of Firefox is closed, it remains active in the process even if there are any open windows. So I have to use the application management processes.

  OS-Windows 7 Home Edition
  When I close Firefox 29 (just installed) the firefox.exe * 32 process remains active and I have to close the Task Manager.
  Otherwise, when I try to run it again I get the message:
  "Firefox is already running but is not responding do not." To open a new window, you must first close... »

  Not this problem with the previous version 28

  Concerning
  Riccardo

  Mozilla publishes the 29.0.1 as a Firefox 29 update tomorrow to alleviate some of the most commonly reported problems here on the forum. You want to get this upgrade by going to

  

  > Help > about Firefox and can be upgraded there.

• Cannot close the window (no tab) with 'Command'-'W' on the mac version of firefox 7.0.1 and firefox 8.0

  I noticed that firefox can not closed is no longer a window using "cmd" + "w" since the version 7.0.1. I have to close the window by clicking on the 'x' on the top left button instead. I just upgraded to version 8 today and the problem has always existed. It never happened in the previous version.

  It is quite embarrassing especially for pop-ups.

  is this a bug or a feature newly added? How can I restore it to the way it was?

  Thank you

  issue is resolved by disabling the plugin to evernote web clipper 5.0

• Imported Photos images do not show in Safari or iMovie unless you close the Photos and the other App - WHY?

  I used to be able to import photos into iPhoto and use them immediately in iMovie and Safari, but since one of the improvements (Yosemite or whenever replacement iPhoto Photos), if I import photos into Photos and you want to use in Safari or iMovie, I have to close the two Photos and Safari or iMovie (depending on what I want to use it in) and then restart the application (Safari or iMovie) I want to use it in.  I can't find a view-> Refresh or anything like that to make the synchronization of two.  Closing the two works like a charm, but it's a huge pain in the *.  Is there a way to get around this?  Thought Apple was smarter than this.

  This video: https://youtu.be/CR1tOaYa5PI illustrates the problem.

  Any solution?

  Thank you!

  Brad

  It is a problem that apple must address - report to them - http://www.apple.com/feedback/photos.html

  LN

• Close the reference (for a more specific class)

  I'm feeding a control reference to the node "to a more specific class.  When I finished, I understand that I have to close the order, but what I also close the reference that is the output of the node "to a more specific class?

  This is the same reference... There is no need to close the two.  And if you approve the automatic cleanup of references LabVIEW, you really do not need to close, as the references control must never be matched and will be automatically cleaned when your VI is inactive.

  For more information, here is a blog that just now, I wrote that talks about closing reference.

• Usuage high ram. Can go as high as 3 gigs. Have to close Firefox to stop him.

  Firefox has a few updates there, not sure what is. My ram usage began to climb while I have the browser open. If I close the browser, it keeps climbing. He went as high as 3 GB of ram, with only two web pages open. I don't know how high it would go, but I'm not going to find the hard way. He has never done this before one of your updates. To stop it, I have to close the browser and then restart that he abandoned the use of the ram. As soon as I open it again the browser, the use of the ram begins starts to climb. Nothing else on the computer uses ram like this. I use a Dell computer, which has 8 GB of ram. I am running windows anniversary edition 10. I wrote a request for assistance with this, a couple of weeks and got a response that says close the browser and restart it by pressing the control button as a solution. It does more than closing just for that. The ram still rising back up mounted. Y at - it of your add the RAM sucking like that? Any suggestion would be appreciated thanks

  It could be the work of one of your modules. Type of topic: addons in the address bar to open your add-ons Manager. Access key; (Mac=) A)

  In the Manager of Add-ons, on the left, select Extensions. Disable some add-ons, then restart Firefox.

  Some added toolbar and modules of Kaspersky Anti-virus are known to cause problems with Firefox. Disable all of them.

  If the problem persists, disable some more (restarting FF). Keep doing this until the problem is gone. After, you know which group is the origin of the problem. Reactivate the last group ONE AT A TIME (reboot FF) until the problem reports.

  Once you think that you have found the issue, that disable and reactivate all the others, then stop and try again. Let us know who the suspect is, detective.