Do I restore laptop to factory settings after the plague of virus?

Invaded by virus quarantined files because they cannot be deleted. "System Restore" is not working now.
Can I restore laptop to factory again?

Of course you can do it. Please use recovery media delivered. On this way the unit will be to new factory settings. The installation is very simple.

Good luck!

Tags: Toshiba

Similar Questions

  • Pavilion 15-ab043sa: cannot reset to factory settings after the upgrade computer laptop brand new 10 Windows

    I bought 2 new laptops, they seem to be special models not listed is not in the HP support site, purchased from Currys PC World in the United Kingdom.

    First HP Pavilion 15-ab045sa laptop computer 15.6 "-red, upgraded to windows 10 perfectly well and I made a backup of the system while I studied the creation of recovery media (this info must be printed with the laptop in the box, rather than letting the user have to find BTW)."

    The other a HP Pavilion 15-ab043sa laptop computer 15.6 "-blue, for my parents, has turned into a total disaster."

    The two models are the same, except that the first is red and the other is blue, that's why they have different product numbers?

    I was now in a position where the recovery on the D: drive partition is not a factory reset.

    I did not even recovery disks as having the first one to go smoothly, I thought the same thing would happen on the second laptop and I got the recovery disc then.   I tried to create a USB stick recovery, but I had no one who can save the system settings - need at least 32 GB free.

    This occurred as first I started the laptop, made of windows, MS Office 365 updates, added then waiting 2 days for windows 10 to arrive.  When it came it installed fine and then I added a printer driver for an HP printer and made some configurations of the operating system.  At the next reboot showed something was wrong as the boot took over 7 minutes.  As the synaptics app was referenced twice in the tab start Task Manager also had strange things in the system.  Rather than go back to a previous system restore point that I attempted to identify what was wrong and uninstalled all without success.  I then had the opportunity to go back to 8.1 for Windows or "reset the PC.  Not a lot of explanation on delivery to zero and certainly no warning options that the D: partition was no longer valid.  Windows options were "in my face" so I don't think watching HP recovery.  So I chose to run from Control Panel 'Reset the PC and keep the files'.  So, indeed, I now have a clean install of Windows 10 but have lost all applications that were on the factory orginal building.  I see no way to re - install all of these programs and find the license keys.  I have more HP recovery at all.

    So I have no way to put the blue doesn't return to the factory settings.

    Advice please, I want a laptop blue, the same as the red, i.e. Windows 10 with all applications that have come to the factory as well as the correct printer drivers and a time of less than 30 seconds of starting.

    You are not sure if there is anything I can copy from red to blue to get it going again?

    Any help gratefully appreciated, thank you

    You have the options of Chat or telephone. Mon - Fri 08:30 - 18:00. Sat 10:00 - 16:00.

  • Cannot restore laptop to factory settings

    HP laptop Dv6-6b50sa QG797ea #ABU

    I need to restore this machine on the factory settings. Tried pressing the F11 key at startup to the top, but it does nothing

    Hi yewtree,.

    Boot Windows, hold down the Windows key and press R.  In the run box, type compmgmt.msc , and then press ENTER.  Click on management of the disks in the left pane and when loaded partitions, make a right click of the recovery Partition and mark it as 'active '.  Close all open windows and then restart - if it worked, the laptop boot from the recovery Partition during the restart.

    Let me know.

    Kind regards

    DP - K

  • return to factory settings after the critical update

    What happened after 3 different updates critical in the last 8 weeks or so... have my windows 7 64 bit set automatically download (and install) made critical.  When this happens at 03:00 as expected, the next day when I log on my desk (after the automatic restart) my office back to the original "out of the box" settings.  Wallpaper is changed, all my files are gone, including photos, videos, documents from Ms.  If I use I can recover my files system/system restore.

    Then, if I install the update again once, no problem.  Always afraid that the restoration will not work but well.

    Sounds like your user profile Service is damaged:

    FIX: The user profile Service has not logon. Unable to load the user profile: If you are unable to log on your...

    Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • recover factory settings after the virus, can I pick up my photos?

    virus of which seemed to be the blue screen of trust e-mail address caused.  had been able to run the Startup Repair and system restore to get online after about 30 minutes of waiting.  After a week might not be online at all.  in a panic, I decided to bought computer to original settings.  bad idea, I completely forgot all the photos I had saved over the years.  are they completely disappeared now with the recovery, I did?

    If it was a destructive restore to factory settings all data has been lost and if you did not save the data unrecoverable sound.

    So, you may want your future stratergy to backup and what Antivirus program you install

  • Question related to delivery to zero laptop to factory settings using the recovery disk

    I tried to give my knees to its factory settings, but it took a recovery disk Windows that I have no idea about.

    Where can I find it?

    Hello Rumourio,

    Yes you are right, if you perform a factory reset in this computer that has Windows 8.1 will now change all its files and settings Windows 8. It seems everything as it was when you bought the computer.

    Hope this information helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

    Thank you

  • How can I turn off the laptop after restoring it to factory settings?

    Hello everyone

    I'm selling my Portege R830-10 q If I want to restore it to the settings to factory (out-of-box state) AND THEN TURN IT OFF.

    I brought the laptop to factory settings successfully using the _TOSHIBA recovery Wizard_ and choosing * factory default software recovery (Recover State out-of-box) *. However, at the end of the process of recovery and after everything is back in place I was not able to TURN off the POWER to the laptop. It only gave me the option to restart. After rephrasing it, the Windows installation process starts.

    I don't want to install Windows, i.e. language, keyboard, user account, etc. I want to leave the Windows installation for the person buying the laptop to me. How can I turn off the laptop after the recovery of the system without having to install Windows?

    I would appreciate your help.



    When the recovery process is complete and you are prompted for a reboot just press start button / stop and turn it off. I think it's only thing you can do.

    Anyway, why not start Windows and go through the configuration option. New owner can modify this basic anyway parameters. As username Admin and language and the keyboard can be set as default.

    For example, if you have a picture of German recovery set to German. New owner can change in any case.

  • I want to restore my laptop to factory settings

    I want to restore my Asus laptop to factory settings. IM only 14 so I don't have any extra money to spend. Please answer my question as soon as possible. Thank you

    What you need is to find the Asus recovery in the main menu, and then make sure that the CD/dvd of popular recovery with her and then you can perform a factory restore.


    Press F9 or F10shortly after connecting, you will have to the ASUS recovery partition. This will restore settings and all user data will be gone

  • I have restored the laptop to factory settings, the product key sticker is faded... While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

    I bought my laptop with microsoft office 2010 is installed. I restored my laptop to factory settings, the product key sticker is faded so I used jellybean keyfinder to get it. While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

    What should I do to make it work again?

    Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010. Also using the value default key OEM SLP for Windows 7 does not work with Office 2010

    If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

    Trial license:

    Full license:

    Get the key;

    If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

    Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

    Error message when you start an Office application after installing a suite Office: "invalid product key".

    If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

    Run the patch tool mentioned in the article below to uninstall Office 2010:

    Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

    Trial license:

    See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  • How to do a restore of my acer laptop to factory settings

    Any1 can tell me how 2 Restore my acer aspire laptop 2 factory settings

    Without a specific model number or what operating system delivered to the unit, I can direct you to our base of knowledge and a few items that we have available that deals directly with this topic.

    How can I restore my computer by using ALT + F10?

    How can I restore my computer using eRecovery Management?

    In addition, this is a comprehesive list most of the topics on creating and using the recovery media that can help: Use Acer Recovery Management to restore your system or create recovery media

  • System Restore to factory settings after replacing the hard drive?

    I have a Lenovo ThinkCentre A52, which recently required a change of hard disk and the removal of a defective RAM 1 GB stick. When I bought my computer, it came with Windows XP Pro and the new hard drive that the updated computer has Windows XP Pro, but it seems to be missing a large part of the software (drivers and programs) that originally came with the computer, and even if I downloaded and installed most of them since the Lenovo Web site There are still some problems related to software that I can't fix. Ideally, I'd like to go back just to restore the system to the factory settings using the ThinkVantage Rescue and Recovery program, but I don't know if it will work. All programs and the necessary drivers will be installed again, even if my current hard drive is not 'knows' thereon? I need to get a Windows XP Pro installation CD, if I want to keep my operating system? Also, is it important that my current hard drive is half the previous, or that I now have half as much RAM?

    Thank you

    After replacing the hard drive, the only way to restore it to the State of the plant is using the Lenovo installation diskettes. You can also ask if Lenovo has a solution to your problem without having to reinstall Windows.

    You can download Lenovo drivers if they are not included on the installation disk. The size of your hard drive does not matter.

    Lenovo - call to order recovery disks:

  • __Restoring your laptop to factory settings _

    I'm certainly not great computer so I need some help on how I would be able to restore my laptop to factory settings, since I don't have disks for it at all. I HAD PURCHASEED IT OF A FRIEND OF A FRIEND AND ALL THEIR INFO IS ON IT AND I have JUST the WANT DELETED.

    See which of these methods apply to you:

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.


    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.


    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.


    Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    MS advice on the conduct of clean install.

    A tutorial on the use of a clean install

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • How can I reset my laptop to factory settings

    How can I reset my laptop to factory settings


    There are three main ways to restore your laptop to its 'Condition of the factory' - see the document on the corresponding link below.

    Performing a HP System Recovery - Windows 8

    Perform a recovery of the HP system - Windows 7.

    Perform a recovery of the HP - Windows Vista system.

    Perform a recovery of the HP - Windows XP system.

    Kind regards

    DP - K

  • To install my laptop to factory settings

    I have a Compaq Notebook PC, V6000 Series.I want to restore it to factory settings, but is not a disc.  Help


    How to reinstall Vista

    Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    HP machines are normally F11 at startup to start that process of factory settings recovery

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    How to replace Microsoft software or hardware, order service packs and replace product manuals

  • Unable to restore iPhone to factory settings

    When you try to restore the factory settings I should be in iTunes and when I try to restore it to factory settings it does not load

    Nevermind it finally loaded

Maybe you are looking for