Do not crop

Similar Questions

• How is it, my text is not cropping with ellipses?

  Anyone know why my text is not cropping with ellipses? I use drawText() depending on a listfield reminder drawListRow(). It displays the text very well, but when I try with selection of cultures is not crop or display ellipses. Any help would be greatly appreciated! Here is my code. This text sample value goes much further than 60 pixels...

  g.drawText ("1234567890123456789012345", 50, y, DrawStyle.ELLIPSIS, 60);

  Your code seems well, here is an example of one of my programs to compare - you'd put in other styles DrawStyle, but I think they are anyway by default.

  graphics.drawText (descString, column1Start, yPos, (DrawStyle.LEFT + DrawStyle.ELLIPSIS + DrawStyle.TOP), column2Start - 2);

  What Simulator and JDE do you use?

• Lift and stamp of exposure, but not cropping

  I would like to stamp exhibition, but it seems that it also marks the cropping and it cannot be disabled.  Am I missing something, or is there a way to simply remove the selected settings.  The box seems to apply to everything under the "adjustments" section.

  Cartoonguy wrote:

  I would like to stamp exhibition, but it seems that it also marks the cropping and it cannot be disabled.  Am I missing something, or is there a way to simply remove the selected settings.  The box seems to apply to everything under the "adjustments" section.

  Just in case where you can't find this now - the answer is a little late, I know

  In the lift & Stamp HUD, you can remove items, not just disable them.

  First raise the data of the selected image. In the lift & Stamp HUD click the Basel to the right of the "adjustments", then select "Crop" and use the delete key to remove the culture of fundraising points.

  Just delete the full entry using the delete key.

  

• HP Deskjet 1050 suddenly won't let me not crop the borders

  Hello

  I got this Deskjet 1050 for a long time and it has always worked without problem. Suddenly, it won't let me adjust the borders on the pictures. I try to crop and save some pictures of my high school Yearbook. I did several times in the past with no problems whatsoever. Of course, with a directory, you should never close the lid down, but it remains always cropped photos directory in the past, so why suddenly prohibited?

  Instead of the usual line right with arrows at both ends, when you move the border, I am a smaller image "squareish" who will not let me enter the border and drag. BUT, if I just put a single photo or a junk mail envelope in and the scanner, I can crop very well. The only difference is that the lid is closed completely.

  If this quirk would be normal by its design, I would say very well, but why all of a sudden after all these years?

  I would appreciate it so any ideas you useful people.

  You care.

  Mike

  Hi dwarf, please provide the screenshots.

  I had tried the scan on a printer of laboratory with a single document, and the other with the lid open and was able to crop the picture in both directions. So I do not know why your software is not allowing the harvest. It shouldn't make a difference if you scan a single page or a brochure for the scanning software allows you to crop the image. It might be software related. Try the different settings of the software to see if that makes a difference.

  When you scan the document, you are by clicking on the icon of the culture and appropriate on the right of small black squares, to crop the image?

  Try changing the size of scanning and scan an entire Document to see if it makes a are of different size, a difference.

  You can always scan the photo, save it and then open it in Paint under all programs, crop and save the image there as a work-around.

  Thank you.

• Photoshop CS6 batch automate background not cropping

  Hello. I use Photoshop CS6 to automate batch processing. I am of culture/resize the image. My action is: 1 810px at 96 DPI x 1080px culture 2. Save for web 3. close. I tried both of the substitution of registration with the substitution of registration. I don't have only one layer in the file, which is the image, set as background and is locked (by default when you open images). The first few images are fine, but eventually most of them look like this:

  

  Anyone know why this is happening and what I could do to solve the problem? Let me know if you need more information.

  Thank you

  Your images are probably not the same size as the image that you used to create the action. I think that action will place the crop in the same place for each image pixel. This isn't a relative location, but absolute location. If your crop on the small images exceeds the image canvas.

• Less prior in the form of crop circle is not precisely

  Hi guys, I'm having a prob wit my pathfinder in illustrator CC that you see in the image below its not not cropping at the circle precisely. I spent the pixel grid align on and outside, to see what will happen, but I still get it you can see the error when his breath to the top and it's ugly. can someone please give me the solution for this prob. I have tried everything but nothing seems to work.

  Thank you

  

  Try to set the precision in the Pathfinder menu drop-down options to something like 0.001 pt

• Printer HP Photosmart 6510 e-All-in-One no ANALYSIS DO NOT THE PAGE WHOLE?

  Does anyone else have this problem?  I tried to scan a brochure, which I can have a file in my computer and throw the paper, but it keeps half the analysis page.  Is there something I need to do?  Any help would be appreciated, thanks.

  (I'm scanning it wireless if it has something to do with it, which I doubt)

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• My photosmart 5510 does not scan the pictures correctly on my mac os

  Hello

  Just like the title says, my Photosmart 5510 analysis correctly on my mac. The photo I, m continuous cutting, scanning sends an incomplete picture when I scan photo to file. I did everything positioning of the image anywhere on the scanner in the selection of all the different options to send the photo wireless on my mac. The scanner seems no analysis does not completely. Any ideas? Help, please. '

  Thank you!

  Hello

  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  If you use Mac OS X 10.7 (Lion), make sure to install the critical update below, otherwise skip to the next step:
  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Now change the settings as follows:
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• Photoshop does not collect

  Hello

  I recently updated my OS to El Capitan and updated RAM in my Mac.  I reinstalled Photoshop 2015.5 and now it will not crop (looks like it will, then freezes) and takes an age to render filters.  I can't work out why.  Does anyone else have this problem?  Y at - it an easy fix?

  

  Turns out I just needed to reset my crop tool. Thank you.

• Scanner does not scan the entire page.

  I am running Mac OSX 10.7.5.

  My all in one 5510 printer/scanner scans only part of the page when I use the key on the device.

  If I scan using my Mac system preferences panel, it works very well.

  Any suggestions?

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle or button view details to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none or A4.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• Photoshop is the embedded images cropping

  I am trying to add the logo of our company to a postcard I design. It is a PNG file. When I embed it in photoshop, the resulting image has the bottom line or two pixels cut off. It becomes the background out the letters in the logo of the culture. I can't understand why he did this or how stop from occurring.

  Help?

  I think I might have thought of it. No matter what I do, it always pressures the boundaries at the edge of the lettering. But I found that if I place the logo full size and then resize it later, it does not crop the bottom of the letters.

  So I'm still confused as to why it does, but I found a work around for now.

  Thanks for all the help.

• Problems with the function of the crop in Lightroom 6?

  Hello; I use Lightroom 6 on a PC with a compatible GPU. I can't get the crop tool to operate; by using the drop-down menu 'tools', or on the icon of the culture in the module 'development '.  After you have selected or other crop choices and after having checked the selection "grid", I get no response in the image that indicates that the tool works.  When I click on a selection and try using the cursor, the image increases or decreases without cropping.  When I watch videos on how to reframe, I scrupulously the instructions; still can not crop!  What the heck is the problem?

  Hi MrKodee,

  Please, try the following steps to solve the problem.

  Try resetting the preferences of Lightroom.

  Press the option for Mac and shift + Alt + Shift keys of Windows immediately after you restart Lightroom and select Preferences reset in the dialog box.

  If the steps above did not help, then try to disable the graphic processor of Lightroom preferences.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom.

  Let us know if that helps.

  Kind regards

  Mohit

• a pdf image can be cropped

  try to crop or resize an image, so that another image may be placed on the same page. Scaling reduces the scanned image. I want to crop the part of the page that does contain not any image or text.

  Player may not crop. You could review subscription services to Adobe Acrobat Document Cloud for a service that can do this.

  Usually people buy a license to Acrobat when they want to manipulate the contents of a PDF page.

  Be well...

• How to crop images gopro 1080 p up to 640 x 480 sd?

  I produce a sequence that is 640 x 480, but I have a few additional footage that was shot with my gopro 1080 p w.  How I get to the bottom of this sequence at 640 x 480?

  Do not crop.

  Scale it down using Motion > scale or click with the right button on the clip in the timeline and apply a scaling options.

• How many videos can fit into a form that is not a rectangle?

  I have a logo that has several triangles and I want to have 3-4 videos playing inside the triangles. The only thing is to culture does not allow me to set the videos properly. I tried to add black video and work video but the video of the 2nd and 3rd do not crop properly.

  Use of masks and movement