Do not install xp sp3 os in my computer hp laptop
Dear Sir, I have hp g60 laptop computer US model 230. I installed windows 7 in there. I have xp sp3 os cd bootable. When I try to boot xp from rebooting my computer, a massage appear "press a key to start. Then I pressed a button any. After several minutes. a massage appear that are as follows: "a problem has been detected and windows has shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer if this screen appears again, follow these step. Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to ensure that it is properly configured and completed. Run CHKDSK / F to check the hard drive corruption and then restart your computer. Technical information STOP: 0 X 000000780 (0XF78D2542, 0XC0000034, 0x00000000, 0x00000000) ' I installed windows 7 just now and not any driver I have installed in it. " All the drivers work correctly in the windows operating system 7 (not any yellow question marks in device next to any driver manager). I have scan my computer in full and no virus found. But when I try to install xp sp3 os inside appear above even massage in each trial. Please help me to install xp sp3 os step by step. Thank you.
You need the SATA ICH9M driver slipstreamed with nLite:
Extract with 7Zip and use nLite wake and burn a new cd of XP. If you are unsure how to proceed, refer to the Guide of Daniel here:
Tags: Notebooks
Similar Questions
-
Question: I'm new to LR and did install you on a Mac desktop computer and laptop. On the laptop, the basic function under develop simply disappeared. I'm lost. Help.
This is a common problem. The basic Panel is simply hidden.
Billboards / of masking is actually a function of Lightroom, but it is intuitive--not many people know that there are - for the most newcomers are thrown when a Panel is somehow hidden.
Right-click anywhere in the area of the Panel on the right hand side and a context menu will appear.
Click on the basic option to re - appear the basic Panel.
-
The computer has XP Home. It is an older machine, 266 Celeron, 2 GB of Ram that I built a few years ago. It is part of a home network. It has not been updated for a while so I decided to install SP3, updates, IE 8, BackupNT off CD, FixIT and Partition & Format 2 more large players. It wouldn't install them or partition or format the disks again. It is clear that I have no idea. Mike
Hello
What is your level of service current pack? Click right my computer, click Properties, on the general tab, he says.
If this isn't SP1A or SP2 you will not be able to install SP3. You will first need to install SP2.
How you try to install the SP3? Stand-alone package or Windows Update?
I must say that I'm not sure why you are unable to install, for example, NTBackup. As said by Harish B N, we need more information about the error you get.
Tricky
-
I can not install the necessary updates on my computer.
I have the symbol of yellow shield on my task bar indicating that the updates are ready to be installed. I try to install but constantly the error message. The update is for the new windows. Configuration of the message error States could not verify the integrity of files needed for the installation. Make sure the Cryptographic Service is running on this computer "." My cryptographic services is set to auto.
Now, I am also unable to use my Messenger I get a message to update to the latest to continue. This will not install.
I use windows xp home addition.Also try the following MS KB article:
http://support.Microsoft.com/kb/822798
As suggested in the article, test after the use of each method.
-
Why can not install service pack 3 on my computer
When I install service pack 3 on my computer I get a black screen and need to restore my computer to an earlier time
Hi Patricia,
· You get the black screen when you open a Windows session?
It seems that you restore the computer to the back. I suggest that you follow the recommended steps for the installation of Service Pack 3.
Steps to take before you install Windows XP Service Pack 3
See also:
-
I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows
When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.
I have laptop Lenovo, which has something like that for bluetooth
Broadcom Bluetooth 4.0 USB
Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi
In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).
But windows cannot fix it. I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well. I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.
Please help me. Please give me link if there is no download needed
Original title: bluetooth
Hi Roger,
You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.
Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:
Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.
Please come back if you face problems related to Windows and we will be happy to help you.
-
can I install Windows 2003 server in my computer hp laptop pav14-v021tu
Hai
My system came with windows 8, when I bought.
But now I thing I finstalling windows server 2003 in this laptop, I heard from my local technician some computers laptops hp does not support Server 2003 (he said need some drivers from hard disk sata hard or something like that)
As I have not super-hotel with this stuff,
some we can't so please say argues this model the windows sever 2003 if so this laptop has no other than the Server 2003 addinational drivers to work
Thank you
Hello:
The technician is correct on the sata drivers are needed.
The problem is that your laptop is an Intel 4th generation of processor and chipset of the 8 series.
Intel develops not all drivers sata for this chipset, so windows XP and 2003 server will not install on the PC with this chipset. Nor are there at - he graphics drivers for Windows 2003 server, and probably many other features would not have driver support for hardware that your PC has.
-
Can not install XP SP3 on u4 ESXi 3.5 using LSI Logic
I'm a knowledgeable enough techno.
V3.5u4 ESXi
PCI 32-bit LSI Fusion-MPT Miniport driver
Windows XP Professional w/SP3 32-bit (direct from MSDN)
I'm looking for an explanation of why install Windows can't find hard drives using the LSI Logic adapter, when the drivers are loaded. I downloaded and created 2 images of diskettes for the correct drivers of LSI for XP 32 bit.
version 1.20.18.00
version 1.28.03.00
I can start a virtual charge machine, get the Windows installation to load, press F6 and load the driver without error. Once Windows starts, I get the error that Windows does not find the hard drives. What happens here? I mounted an ISO 4, 5-current OpenBSD and looked at the dmesg and of course he found the LSI adapter and hard drive very well.
To be honest, I don't remember where I got it, I got it for a while now.
Please consider awarding points by scoring responses like 'correct' or 'useful '.
-
System works fine, but I get a message "important updates are available" and this always it turns out that for Windows XP service pack 3. I have to keep canceling it because it will always fail (it should). How can I get it to stop, but it can continue to do the automatic upgrades without this problem?
http://Windows.Microsoft.com/en-us/Windows/help/end-support-Windows-XP-SP2-Windows-Vista-without-service-packs?OS=XP
If you continue with SP2 only (and hide the SP3), then you won't have to worry about updates.On the other hand, you can know why SP3 is a failure.
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717List of fixes included in Windows XP Service Pack 3
http://support.Microsoft.com/kb/946480TaurArian [MVP] 2005-2011 - Update Services
-
I can not install any CD-ROM on the computer.
I have microsoft Vista. When putting a disc to install AutoPlay does not start & I can't open via my computer. When I put the disc nothing happens, it is as if she has not yet been implemented.
Can anyone suggest anything?
Thank you
Hi alyshacrick,
Please see the post below with a similar problem and fix possible:
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Original title: window update problem.
Error code: 80246008 error Code 0 x: 0 x 80246007, error Code: 0 x 80200010 and error Code: 0 x 80246002 what its means? And how to solve this problem to?
(merged thread)
Hello
Did you do any hardware changes or software on your computer before this problem?
You can follow these links & check if it helps:
Hope the helps of information.
-
I bought this new computer from harvey norman is a sony vaio (I have no idea what anyone else). It came with windows installeded on the computer. now, whenever I start my computer it tells me it is not a genuine copy. How to make this verified as authentic.
"Tash71" wroteDiagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0x8004FE21
Validation caching online Code: N/a, hr 0xc0000022
Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
Windows product ID: 00359-OEM-8992687-00006
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010300.1.0.003Other data-->
SYSTEM >Packard Bell imedia S3810 American Megatrends Inc.. P01-A1 20100331000000.000000 + 000 License data-->
On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
Error: 0x80070426Windows Activation Technologies-->
HrOffline: 0x8004FE21
HrOnline: n/a
Beyond: 0 x 0001000000000000
Event timestamp: 3:14:2012 21:25
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:
Altered Service: sppsvcActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID valueThe Service for the Protection of software does not...Click Start
in the search box, type
SERVICES. MSC
and press the Enter key - accept the UAC prompt if you get a.
Look in the console for the Software Protection service, right-click on it and select Properties.
Make sure that the Startup Type is set to automatic (delayed start) and click on apply.Try to start the service now - do you have an error message? It starts? He almost immediately stops again?
Post back with your results and a new report MGADiag.If it doesn't start, then please do the following...
Please, open an elevated command prompt window (Administrator) and use the following commands...net start sppsvc
sc qc sppsvc
SC queryex sppsvc
SC qprivs sppsvc
SC qsidtype sppsvc
SC sdshow sppsvc
Copy and paste the results in your response (to copy the results... click the black and white icon in the upper left corner and select Edit... ('Select All' and press the Enter key - and then use Ctrl + V or right click + Paste to paste in your response), and the EXACT error message you get when you try to start the service from the Service Control Panel... -
I can't install the printer driver for my printer lexmark 2300 on the my new HP laptop with windows 8. I have the lexmark installation cd.
Hello
Probably the CD was born before Windows 8 is why he knows nothing about this product "nice". Please visit the following site. Hope that your printer is still the list:
http://support.Lexmark.com/index?page=content&ID=OS27&locale=en&UserLocale=en_AU
If so, you can download driver from here, it is a product of Lexmark.
Kind regards.
-
At first my computer intel was blocked in a reboot loop, then just the black screen with cursor.
I could never establish safe mode! I don't have a recovery partition.
Hello
Step 1: You can try using disable automatic restart on system failure option and check if you get the error message. If you get one, then return the exact error message.
a. restart the computer.
(b) that the computer restarts, press the F8 key repeatedly until you see the Windows Advanced Options screen.
c. use the arrow keys to select disable automatic system error rebootand press ENTER.
Step 2: Reinstall Windows XP.
-
I want to leave my old HDD (1 TB) and buy a little extra (maybe 256 GB) SSD, but I read that it is not indicated (apparently existing) slot that is apparently designed for a TV tuner?
It's true. The possibility of using a WSSD began only with Intel 3rd gen processors and yours is 1st generation. You see the slot looks like a general pci-e slot, but it is probably specialized for a (cell) WWAN card only.
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
Maybe you are looking for
-
Apple will replace my iPhone 6 s?
I was on my phone and it got really hot, which he had done before but he wqs never this bad and I have my phone turns off by itself. I thought he was dead so I put him in charge and still it would not come back. It would be Apple replace phone or if
-
Camera HDR-AS50 disconnects right after that QR Code is scanned
Hello I have problems connecting my new ActionCam AS50 on my Android (Samsung Alpha) phone. Steps to follow: (1) first of all make sure that WIFI is on in the camera. (2) then I scan the QR code. (3) it asks me to connect. I say ok (4) it is said con
-
I downloaded Google Chrome and now Safari does not. How can I get it back?
-
How to remove permanently free game players out of my control panel Windows XP computer?
I would like to know how do I permanently remove/add free game players out of my control panel (Windows XP). I tried to get this game but it remove it from my control panel. Your help is appreciated. Thank you.
-
I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.