Do not load the Windows Update PAge

Similar Questions

• I got this rerror or80190194 when I open the windows update page

  When I open the windows update page approach error code # or80190194, can someone help me solve this problem

  When I open the windows update page approach error code # or80190194, can someone help me solve this problem

  You have installed Service Pack 3?

  Alternatively, download the standalone installer from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Don't worry it is said that it is for HER and the developers. It's the same one you can download normally from the Windows Update site.

  Windows Update blocks access if the user does not have the latest Service Pack installed.

• How can I get rid of the code 80070422 won't let me load the windows updates

  I can not load any windows updates get them all is code 80070422 and said to get help, I tried all the normal with the administrative tools, and using safe mode but nothing seems to work, please help me I have more patience

  You have disabled the BITS service, isn't the case?

  0 x 80070422

  -2147023838

  ERROR_SERVICE_ PEOPLE WITH DISABILITIES

  In almost all cases user has probably disabled the BITS incorrectly service thinking that it would improve the performance of the computer.

  https://TechNet.Microsoft.com/en-us/library/cc720432%28WS.10%29.aspx?f=255&MSPPError=-2147217396

• Why Safary does not load the content of pages?

  Why Safary does not load the content of pages? I mean, when I hover over the places where should be the content, he is always showing the "redirect to: [email protected]/" lower left. My Safari is 9.5 and worked fine until Safe Fimder Virus get inside my computer. Mozilla Firefox is a bit slower. If someone could give me an idea on how to deal with it, I would be happy.

  Sorry if my English is not good, I am a Brazilian who is still learning English

  Your English is very good!

  Redirects are usually due to adware or malware.

  Download the run MalwareBytes.

  It of free and takes only a minute or two. Which should remove all adware and malicious software on your Mac.

• HP Z800: HP Z800 refreshed win 7 pro 64... do not finish the windows updates...

  HP Z800 refreshed win 7 pro 64... do not finish the windows updates...

  Newly installed OS - everything seems to work fine, except for the shot without end to WIndows update... Verification of updates. Apparently, this affects the update of Windows 10 as well. Someone at - it ideas? I tried all the options via the site help MS. Merci.

  Greetings,

  Please read this.

  You can wait patiently (updates will appear later) or there is a problem in the article.

  You need to reinstall Windows for the fix. Your PC must be isolated from the network when reinstalling windows. You need to download both updates and install before connecting your PC to the network.

  I used the fix of Ed Bott and it works. But I reinstalled Win 7 again. I wasn't going to wait for hours and hours to get the security updates.

  You can try to install these updates on the problematic installation of Win 7:

  1. apply the Microsoft patch found here. Disconnect from the network.

  2. install the two updates in offline mode and cross your fingers.

  3. repeat on Windows Update.

  See you soon!

• Error to the Windows Update page.

  This message appears on the Windows Update page after clicking on the Express button. "The website has encountered a problem and cannot display the page you are trying to display." There is no error code.

  Error code when you use the Windows Update or Microsoft Update Web sites to install updates: "0x8024D00C."
  http://support.Microsoft.com/kb/958053

  http://support.Microsoft.com/kb/914226
  Windows Update has encountered an error and cannot display the requested page.
  In addition, you see "[error number: 0x8024D00C]" in the upper right corner of the Web page.

• Windows does not load after Windows update on January 8, 2010

  Basically, I've updated windows last night and is gone to bed and after I myself woke up and turned on the computer, windows won't load.

  There was an option to repair, but he says "Startup Repair cannot repair this computer automatically.

  So I ran the hardware test and everything was fine.  I tried to do a system restore... but it is come to the same, exact screen stating that «Startup Repair cannot...» ». I tried to run in safe mode and exactly the same result.

  I don't want to try to restore the computer to factory settings and lose everything I have.

  Help, please!

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include Error Codes, as appropriate, and exactly what happened when you did the update last night.

  In this way, you will receive the best help.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the worst happens, follow these steps below for data recovery before reinstallling:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 does not load after Windows update

  my computer has tried to do a windows update a few days ago and now it will not load windows. All I get is a black screen with a cursor.  I am able to access safe mode. I did a system restore, which did not work. Antivirus software can't find anything alarming. I checked the ram and the hard drive and nothing was found. Start diagnostic work and I tried to make the windows update again, but he could not give me the codes following three (1) 80246005 80246008 (2) and (3) 641.

  Hello

  Thanks for posting your query on the Microsoft Community.

  The error codes you mentioned, suggests that you are facing because of the updates of Windows. Here are two articles that will help you solve the problem.

  If you receive the Windows Update 80246005 error when checking for updates, it means generally that you cannot save the files to the Catroot2 folder or that the Cryptographic Service has not been started or is not working properly. Follow the steps below to correct these

  Windows Update error 80246005

  If you receive the Windows Update 80246008 error when downloading updates, you might need to change the (BITS) Background Intelligent Transfer Service or the Windows event log service settings and restart each service.

  Windows Update error 80246008

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• Get to the windows update page.

  It seems that I can't update windows page, im running windows xp family and I have no prob getting to most of the sites with the exception of a few sites of malwere were that I tried to get
  Some programs to find out if I have a virus, but when running like 5 different antivirus programs on my computer it his own sase.
  I also ran some spywere those also, someone out there is no help for me? im confused and I want to make sure my computer is secure and up-to-date with all the softwere.

  Hello

  * What happens when you try to run Windows update?
  * Do you get an error message?

  Try to visit the Windows update site manually by typing the following address: www.update.microsoft.com

  You can also try to reset the Windows Update components by running the fixit in the following article.
  How to reset Windows Update components?

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the WIndows Update page

  I am running Windows XP with Service pack 3. Microsoft Security essentials is the security system. When trying to run Windows Update using Internet Explorer 8, at the point of the page is to check that if my system is the correct update software, the page fails, finally displaying the message "Internet Explorer has stopped to try to restore this Web site. It seems that the Web site continues to be a problem. "This is repeated each time I have repeat the initial attempt, or click 'Back to the microsoft.com site' on the error page. Is the problem with the Microsoft web page (the address is www.update.microsoft.com/microsoftupdate/v6/default.aspx ) or on my computer?

  When I try to run Windows Update... to the point that the page is to check If my system is correct, update software the page can't...  Is the problem with the web page of Microsoft ( www.update.microsoft.com/microsoftupdate/v6/default.aspx ) or on my computer?

  You are correct George: whenever you access the site Windows or Microsoft Update, Windows Update will take care of updating itself. that is, it looks for updates available from the Windows Update Agent or the customer allows you to update your system.

  Since June 21, 2012 a WUA new version 7. 6. 7600. 256 aired by WU to automatically update itself its version now aged 7. 4. 7600. 226 .

  The problem you see may occur when there is a version mismatch of the file with the Windows Update Agent files, which is a mixture of old files with the new files. This is due to an installation "or damaged."

  You can take a look at your windowsupdate.log file located in your WINDOWS directory, to check the error codes - missing files or failling updated files (especially c:\windows\system32\wuapi.dll, wups2.dll, c:\windows\system32\wups.dll or wuweb.dll).

  You must re-register or re - install files WU in order to obtain the Service Windows Update works again. Try here:

  http://support.Microsoft.com/kb/958053

  And

  http://support.Microsoft.com/kb/949104

  Trust that this assistance.

• New installation of Windows 7 Professional 64 bit does not install the Windows updates

  I tried it twice.  I install Windows 7 Professional 64 - bit on a ThinkPad T61.  After installation and activation successful Windows, I tried Windows updates.  The 'check updates' never ends.  After the first installation of Windows, I tried all sorts of bugs found either here or other Windows Help Web sites, does not.  So I reinstalled Windows, but with the same result.

  After that the first installation was impossible to install updates, I received the Windows Update stand-alone Installer and downloaded the stand-alone files for updates.  Would install things like IE updates, but no security update would install, as well as most other updates.  Yet once, just standalone Setup would continue to search for already installed updates without ever ending.

  Does anyone have an idea how to solve this problem?

  Thanks for the comments.  It's good to hear that you have actually solved the problem.

• the Windows Update page 2 contuinely Windows updates do not settle.

  TWO UPDATES OF WINDOWS CONTUINELY DO NOT SETTLE. DOWNLOADED THOW

  Hello

  1 updates are?
  2 how and where did you download these updates?
  3. you receive an error message? If so then after return the same thing.

  Read the following article that may help you resolve this problem.

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Cannot install Windows updates
  http://support.Microsoft.com/kb/555461

  How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation
  http://support.Microsoft.com/kb/906602

  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144

• WindowsUpdate_00000646. I tried to install the important updates 15 3 times and every time I try to get this same error. And I have even went to the Windows Update page and still could not install. What is my next step?

  Here is a list of the updates that I need to install and for some reason I can't.

  Update for Windows Live Sign - In Assistant (967912 KB)

  2007 Microsoft Office Suite Service Pack 1 (SP1)

  Update of security for Microsoft Office 2007 (KB951550)

  Update of security for Microsoft Office Excel 2007 (KB959997)

  Update of security for Microsoft Office OneNote 2007 (KB950130)

  Update of security for Microsoft Office Word 2007 (KB956358)

  Update of security for Microsoft Office System 2007 (KB936514)

  Update of security for Microsoft Office System 2007 (KB951944)

  Update of security for Microsoft Office System 2007 (KB954326)

  Update of security for Microsoft Office System 2007 (KB956828)

  Update for Office 2007 (KB934391)

  Update for Office 2007 (KB934393)

  Update for Microsoft Office System 2007 (KB967642)

  You may have overlooked this "sticky" post: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot upgrade to SP3 after a fresh install of XP. Gets the error while accessing the Windows Update page: "the site has encountered a problem and cannot display the page you are trying view."

  Original title: install SP3

  I did a clean install of xp with sp2, hear automatic updates.  After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view.  I tried options suggest they also get the same message or fail to load.

  I did a clean install of xp with sp2, hear automatic updates.  After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view.  I tried options suggest they also get the same message or fail to load.

  Just install Windows XP SP3 manually...

  Before do you - make sure you have restored all the way back to Internet Explorer 6 * and * all your drivers for hardware devices are the latest version of each of the web pages by the hardware manufacturer (Microsoft did not your hardware - to be of course checked manually for the most recent driver by visiting the Web pages or the manufacturers yourself and find the latest driver for any model device (s) you have - map) motherboard chipset video, audio, network, etc.)

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• I have an old version of XP Professional SP1 and a CD with SP2 but when I install both and go to the Windows Update Page I get an error 0x804400A2 number

  and a message that says "the website has encountered a problem and cannot display the page you are trying to view, etc.

  Download Windows XP Service Pack 3 from http://www.microsoft.com/downloads .  You can not access the updates Windows XPSP2 or XPSP1 longer.