Do not register with Correct file extension downloads

Hello

Firefox has failed to save the downloaded files. PDF format when the file is not a. PDF file. For example,.
If you go to this link
http://USA.Denon.com/us/product/hometheater/avreceiversht/avrx4100w
Downloads
DENON S - X Series series RS232 IP protocol 2014
The file to download is a .xlsx. However, Firefox will record in .pdf format. When you save and then try to open, you get a corrupted PDF file. Of course it's not corrupt FireFox has failed in PDF format.

How do you get Firefox to download a file and save in the actual size of the file?

Chrome does this without any additional parameters or installation. Download and save the file in Chome, it registers as a .xlsx file.

I don't know how to feel about it. Mozilla is not often fix things when the problem is that Web sites don't follow appropriate, techniques in order to push developers to become more consistent standards. IE and Chrome have more than an attitude they will protect users from certain incorrect practices even if that allows sites to be a bit lazy. When more people use Firefox, I think Mozilla way has been helpful and has had the desired effect, but now I wonder if she still is/does.

Tags: Firefox

Similar Questions

  • Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type

    Title: download original ROM files on Vista

    Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type. Patches?

    You must get the update of the firmware that can handle the type of file the same place ROMA, you got the firmware file.  From what I see, they seem specific to the product updated. http://www.FileInfo.com/extension/ROM if they don't have it, talk to their technical support staff and ask them what type of program is required to install the firmware provided in ROM format and where you can get it.  Vista doesn't have the ability to read a file ROM type  Some software must be added to give this capability.

    Here is an article I read: "various hardware upgrades and emulators use the ROM file extension." A user needs a flash program usually available on the website of the manufacturer of the motherboard. The user must not flashing BIOS unless the user knows that he has the image of his mother. An error or the computer may be turned off when the wrong BIOS image is flashed. "So be very careful here, or you can completely disable your system.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Service Acquisition of Image Windows (WIA) suspended at startup. Responding server {81ED811 A1F4E726-8CF1 - 11 d 1-BF92-00600} is not registered with DCOM within the required time.

    Since early April 2010, my computer started to shut down immediately after starting, or at a time later. A lot of system errors and other events have been reported in the error log, which much of this: "the MMTP service failed to start due to the error - the following system could not find the specified file - after 31/2 months, I abandoned this fixation and F11 to restart or reload the system to the original system; Have updated and 135 items updated, installed IE8, WinXP Pro + SP3 and finally my HP Laser Jet printer 5 p. Try to strt the computer a few hours later, but it stops immediately after, within 2-3 seconds; Repeat this several times. Unplugged the printer, the computer began; The error showd 2 journal items, repeated several times. i.e.

    (1) the service Acquisition of Image Windows (WIA) suspended at startup.                                                  (2) the server {81ED811 A1F4E726-8CF1 - 11 D 1-BF92-00600} is not registered with DCOM ala required timeout.  Can someone help please? I have to go into msconfig and other? I'm tired & patience thereby and the help that I received from the MS Tech Support.

    Help, please! Thank you! HeinrichDS

    Thanks "nass 1" for your support, I will follow Palouk recommendations to update the drivers for the HP product and hope it will be OK.

    I appreciate your help, HeinrichDS

    HeinrichDS

  • Earphone is not upward or the database service is not registered with her

    Hello

    I'm new to the world of the oracle. Newly installed oracle DB 11 g. I tried to start dbconsole his failure. So I looked in Google additional suggestions on the order of RECREATE EM REPOSITORY .emctl stop dbconsole went successfully.

    but when I tried to run emca - deconfig dbcontrol db error listener is not to launch or database service is not registered with it below is the log

    tail - n 20 /u01/app/oracle/cfgtoollogs/emca/ORCL/emca_2014_06_05_09_07_17.log

    at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)

    at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)

    at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)

    at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)

    June 5, 2014 perform 09:07:37 oracle.sysman.emcp.EMConfig

    SEVERE: Earphone is not upward or database service is not registered with it. Start the listener and register the service of database and rerun the wizard of Configuration of EM.

    See the file journal at /u01/app/oracle/cfgtoollogs/emca/ORCL/emca_2014_06_05_09_07_17.log for more details.

    June 5, 2014 perform 09:07:37 oracle.sysman.emcp.EMConfig

    CONFIG: Stack Trace:

    oracle.sysman.emcp.exception.EMConfigException: listener has not elapsed or the database service is not registered with it. Start the listener and register the service of database and rerun the wizard of Configuration of EM.

    at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)

    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:203)

    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:157)

    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)

    at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)

    at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)

    at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)

    at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)

    Oracle.sysman.emcp.EMConfig 5 June 2014 RestoreOuiLoc 09:07:37

    CONFIG: Restoration of oracle.installer.oui_loc to /u01/app/oracle/product/11.2.0/db_1/oui

    [config oracle@gds-bgl-oradb] $ tail-f /u01/app/oracle/cfgtoollogs/emca/ORCL/emca_2014_06_05_09_07_17.log

    at oracle.sysman.emcp.ParamsManager.checkListenerStatusForDBControl(ParamsManager.java:3245)

    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:203)

    at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:157)

    at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)

    at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)

    at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)

    at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)

    at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)

    Oracle.sysman.emcp.EMConfig 5 June 2014 RestoreOuiLoc 09:07:37

    CONFIG: Restoration of oracle.installer.oui_loc to /u01/app/oracle/product/11.2.0/db_1/oui

    IG] $


    [oracle@gds-bgl-oradb db_1] $ cat network/admin/listener.ora

    listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora

    # Generated by Oracle configuration tools.

    LISTENER =

    (DESCRIPTION_LIST =

    (DESCRIPTION =

    (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))

    (ADDRESS = (PROTOCOL = TCP) (HOST = gds-bgl-oradb)(PORT = 1521))

    )

    )

    [oracle@gds-bgl-oradb db_1] $ cat network/admin/tnsnames.ora

    tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora

    # Generated by Oracle configuration tools.

    LISTENER_ORCL =

    (ADDRESS = (PROTOCOL = TCP) (HOST = gds-bgl-oradb)(PORT = 1521))

    ORCL =

    (DESCRIPTION =

    (ADDRESS = (PROTOCOL = TCP) (HOST = gds-bgl-oradb)(PORT = 1521))

    (CONNECT_DATA =

    (SERVER = DEDICATED)

    (SERVICE_NAME = orcl.cisco.com)

    )

    )

    ADR_BASE_LISTENER = / u01/app/oracle

    [oracle@gds-bgl-oradb db_1] $ lsnrctl status

    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on June 5, 2014 09:30

    Copyright (c) 1991, 2009, Oracle.  All rights reserved.

    Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1521)))

    STATUS of the LISTENER

    ------------------------

    Alias LISTENER

    Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

    Start date June 5, 2014 08:55:04

    Uptime 0 days 0 hours 34 min 56 s

    Draw level off

    Security ON: OS Local Authentication

    SNMP OFF

    Parameter Listener of the /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora file

    The listener log file /U01/app/Oracle/diag/tnslsnr/GDS-BGL-OraDB/listener/alert/log.XML

    Summary of endpoints listening...

    (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))

    (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = gds - bgl - oradb.cisco.com)(PORT=1521)))

    Summary of services...

    Service "ORCL" has 1 instance (s).

    Instance "ORCL", State LOAN, has 1 operation for this service...

    Service 'orclXDB' has 1 instance (s).

    Instance "ORCL", State LOAN, has 1 operation for this service...

    The command completed successfully

    Please help me.

    You create the password with passwd file utility with the key.

    for the normal user login try one account other than sys (HR, System...)

  • Playback of multiple files with different file extensions

    Hi all

    Is there a way where we can read multiple files with different file extensions using file adapter?



    < property name = value=".*\.csv"IncludeFiles"/ >

    Can include us a few models more file in the property above? Please let me know

    Yes you can. .

    But here, the thing you need to do is all these files must have the same format (XSD)

    You can dynamically pass the name of the file to invoke the activity of the file that is the property of jca.file.filename

    The value given when you set up the adapter will be written by this value. .

    Hope this will help you

    If this is not the case, let me know. .

    Thank you & best regards

    Sharath Kumar

  • works not registered with iMessage, iphone, mac not

    I have a macbook and an iphone 5s

    I pouvez imessage with friend on iphone

    I have peut of SMS with a friend on iphone

    I can't use my mac app Message to do.

    I used to be able to use the mac Message before some sys-update.

    AND:

    We both use ios 9.3, my mac is EI 10.11.4.

    I and my friend has the two permits & login 'apple id' within the Message on iphone.

    I and my friend turned on all counts in the Message "Send and receive"

    I also have their licence in the Message of my mac, same conf

    I tried to connect my iphone and mac out, then connection. or logout / in separately.

    NOW:

    On the Mac, when I choose my friend-A to start an iMessage, his name turns RED.

    If I insist on clicking on send, mac guest "{number} not registered with iMessage" (but is absolutely recommended and use). I can now iMessage to use iphone.

    How can solve this problem?

    In addition, text Message Forwarding does not work between my 5s and mac.

    I even WIFI is running, click on the button put on iphone, no prompt code doesn't show on my mac.

    Please someone help, please. And thanks in advance.

    Transfer text messages - no code on iPad or Mac

    Text Message Forwarding confirm code will not show

  • Error in windows 2003 Standard Edition with Service Pack 2... The server {00024500-0000-0000-C000-000000000046} is not registered with DCOM within the required time.

    Could someone fix for the error below...

    OS: Windows 2003 Standard Edition with Service Pack 2...

    Event type: error
    Event Source: DCOM
    Event category: no
    Event ID: 10010
    Date: 08/08/2012
    Time: 10:00:31
    User: n/a
    Computer: BP1WHIAP011
    Description:
    The server {00024500-0000-0000-C000-000000000046} is not registered with DCOM within the required time.

    Hello
    For assistance on this issue, you can post your question in the Technet Forums.
    http://social.technet.Microsoft.com/forums/en-us/categories/

  • The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

    This morning when I checked my system log, it was filled with errors, while saying:

    The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

    A quick search of the register revealed that it identifies Windows Management Instrumentation (WMI). I looked, and indeed, he was arrested. When I tried to start it, I got the error message:

    Could not start the Windows Management Instrumentation service on Local computer

    Error 193: 0xc1

    All the help I can find on the subject assumes that the application does not have the required permissions. Nothing has been deliberately changed. I tried to do a restore of the system of the last days at several checkpoints and received messages that it could be done. So, I checked all the required permissions were still in place.

    My operating system is XP Pro SP3 with all updates applied.

    So, I have to say that something broken, perhaps in the framework of an automatic update or another. Now, when I try to run Microsoft Update, it just hangs.

    Maybe there is not enough information here, but I'm looking for more help on troubleshooting. I have the system tools enough to report all the news of trial if necessary.

    Thank you

    Don

    Even if I had run a chkdsk/r on my system disk and he come clean, I have decided to launch a sfc/scannow and found 3 DLLs that were somehow not original. Once these have been restored, the errors have stopped (so far). While it was only 30 minutes, it is the longest, I went all day with no error message. I'm keeping my fingers crossed.

  • 2602AP will not register with the 5508 controller

    Hello all-

    We have a 5508 controller that manages the HA to about 20 branches - each branch has its own subnet. We have a single branch (subnet) with new 2602 AP who will not register with the controller. All communications to that subnet appear normal and there is no ACL in place between the AP and the controller. The AP is able to resolve the IP address of the controller via DNS and start the registration process, but then timeout. We have installed 2602 AP successfully to other areas of the branch and they fit without any problems - it is a problem only in one branch. I have attached a few debug messages below for a single point of access (it's a production environment, so I analyzed useless info) and also included messages from the console to a different access point (the console AP messages are the same). There are currently 9 AP here and none of them will record this. Any ideas?

    Capwap debug events:

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:39:32.904: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:39:32.992: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

    * spamApTask0: 14:39:32.992 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

    * spamApTask0: 14:39:42.903 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

    * spamApTask0: 14:57:52.301 Dec 11: DTLS closed connection events receivedserver e8:ba:70:dc:d1:c0 (10:5:13:4 / 5246) client (10:29:9:190 / 44306)

    * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 no entry there for AP (10:29:9:190 / 44306)

    * spamApTask0: 11 Dec 14:57:52.301: e8:ba:70:dc:d1:c0 entry no. AP exist in the temporary database for 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: Discovery d1:10 request 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9 has: d1:10 join priority Processing status = 0, priority 1 of incoming Ap, MaxLrads = 300, joined Aps = 272

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.828: 44:2 b: 03:9's: Discovery d1:10 response to 10.29.9.190:44306

    * spamApTask0: 11 Dec 14:57:53.916: 44:2 b: 03:9 has: d1:10 DISCOVERY LWAPP APPLICATION received at 68:ef:bd:8e:48:6f on port "13"

    * spamApTask0: 14:57:53.916 Dec 11: Discovery 44:2 b request: 03:9 has: d1:10 elements in LWAPP of AP supporting CAPWAP

    * spamApTask0: 14:58:03.824 Dec 11: connection of DTLS 44:2 b: 03:9 has: d1:10 not found, creating new connection for 10:29:9:190 (44306) 10:5:13:4 (5246)

    Debug Capwap errors:

    * spamApTask0: 11 Dec 15:17:33.715: e8:ba:70:dc:d1:c0 abolition PT 10.29.9.190 which has not been surveyed

    * spamApTask0: 11 Dec 15:17:33.716: e8:ba:70:dc:d1:c0 DTLS connection has been closed

    Debug Capwap Details:

    * spamApTask0: 11 Dec 15:24:29.419: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:24:35.542: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:24:41.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:24:49.555: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 11 Dec 15:25:29.420: 44:2 b: 03:9 has: d1:10 CAPWAP control received Msg to 10.29.9.190:44306

    * spamApTask0: 15:25:29.420 Dec 11: connection of DTLS 44:2 b: 03:9's: d1:10 0x1a1703c8 closed by controller

    * spamApTask0: 15:25:29.421 Dec 11: msg closed connection CAPWAP DTLS

    Journal of the Console from the AP:

    Translate "CISCO-CAPWAP - CONTROLLER.ad.pps.k12.va.us"... the domain server (10.29.8.3)

    * 00:00:57.511 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings. [OK]

    * 00:01:10.511 Mar 1: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 16:05:56.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    * 16:06:17.495 11 dec: % CDP_PD-2-POWER_LOW: all disabled radios - NEGOTIATED WS-C3560E-24PD (68bc.0c03.8015)

    * 11 Dec 16:06:28.231: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    * 16:06:55.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

    * 16:06:55.999 3 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

    * 16:07:06.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 16:07:07.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    * 11 Dec 16:07:39.151: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2051 retransmission count Max reached!

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    Kern of logging mechanism

    ^

    Invalid entry % detected at ' ^' marker.

    emergency logging trap

    ^

    Invalid entry % detected at ' ^' marker.

    * 16:08:06.999 11 dec: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.5.13.4:5246

    * 16:08:06.999 11 dec: % CLIENTERRORLOG-3-LWAPP: LWAPP LED Init: incorrect led State 255

    * 16:08:17.367 11 dec: % 3-CAPWAP-ERRORLOG: go join a capwap controller

    * 16:08:17.000 11 dec: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246

    *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Selected MWAR 'IRC-WLC-5508'(index 0).
    

    *Dec 17 15:53:47.463: %CAPWAP-3-ERRORLOG: Go join a capwap controller
    

    *Dec 17 15:53:47.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.5.13.4 peer_port: 5246
    

    *Dec 17 15:54:23.131: DTLS_CLIENT_ERROR: ../capwap/base_capwap/dtls/base_capwap_dtls_connection_db.c:2051 Max retransmission count reached!

    Get much better.

    WAP has selected the 5508 with good firmware.  WAP sends a JOIN request to 10.5.13.4 but cannot recover anything.

    Firewall?  Routing loop?

    What so-called "remote site", how is it connected to your office?  Dark fiber?  INTERNET SERVICE PROVIDER?

    You know what?  Can you post the output in the following commands:

    1 WAP: sh of stocks;

    2 WLC: sh sysinfo

    Nuts, I should already posed for these info before.

  • How can I play videos with .xspf file extensions?

    .xspf file extensions?

    How can I play videos with .xspf file extensions?

    Wikipedia

    "XML Shareable Playlist Format (XSPF), pronounced spiff, is an XML- based playlist format for digital media, sponsored by the Xiph.Org Foundation."

    XSPF is a data format for sharing the kind of playlist that can be played on a personal computer or a portable device. In the same way that any user on any computer can open any web page, XSPF is intended to provide portability of the selections. »

    I hope this helps.  Good luck.

  • the server is not registered with DCOM within the required time.

    I use Windows 7 Enterprise Edition (SP1). It works fine while working on it directly. But when I try to make the remote access connection in the machine it is restarted after a certain time (1 hour or more). I found error in the following system logs:

    Log name: System
    Source: Microsoft-Windows-DistributedCOM
    Date: 01/04/2013 18:41:34
    Event ID: 10010
    Task category: no
    Level: error
    Keywords: Classic
    User: n/a
    Computer: xxxxxx.yyyy.net
    Description:
    The server {AAC1009F-AB33-48F9-9A21-7F5B88426A2E} is not registered with DCOM within the required time.
    The event XML:
     
       
        10010
        0
        2
        0
        0
        0 x 80000000000000
       
        10589
       
       
        System
        XXXXX.yyy.NET
       
     
     
        {AAC1009F-AB33-48F9-9A21-7F5B88426A2E}
     

    Hi Varun,

     

    Thanks for posting your question in the Microsoft Community.

     

    The question you posted would be better suited in the TechNet Forums.

    I suggest you to ask your question in the below link:

     

    Windows 7 networking:

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

     

    I hope that the information above helps you.

    In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

  • Can not open attachments to email with slsx file extension

    Cannot open attachments with extensions of file slsx. using windows vista Home premium, copyright 2006. my e-mail program is thunderbird.

    Are you sure the file extension?

    It wouldn't xlsx?

    If this is the case, you need an Excel Viewer to read these files:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

    Excel Viewer

    Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and previous versions of Excel Viewer

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    And here is a link to a set of free office of Applications:

    http://www.OpenOffice.org/

    How to set file Associations:

    http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

    How do I... Change file extension associations in Windows Vista?

    See you soon.

    Mick Murphy - Microsoft partner

  • Archive the log files are not register with oracle 10g are

    Hello

    I have oracle 10.2.0 Linux redhat 4. my database is archivelog since that sequence mode no 30

    but when I backup all the files in the archives to help newspapers.

    rman> backup archivelog all delete input.

it backups up from sequence 67 

because.

SQL> select sequence# from v$archived_log;

 SEQUENCE#
----------
        67
        68
        69
        70
        71
        72
        73
        74
        75
        76
        77

 SEQUENCE#
----------
        78
        79
        80
        81
        82
        83
        84
        85
        86
        87
        88

 SEQUENCE#
----------
        89
        90
        91
        92
        93
        94
        95
        96
        97
        98
        99

 SEQUENCE#
----------
       100
       101
       102
       103
       104
       105
       106
       107
       108
       109
       110

 SEQUENCE#
----------
       111
       112
       113
       114
       115
       116
       117
       118
       119
       120
       121

 SEQUENCE#
----------
       122

56 rows selected.

while i left with

[oracle@Oracledatabas ArchiveDest]$ ls
1_30_694492901.dbf  1_40_694492901.dbf  1_50_694492901.dbf  1_60_694492901.dbf
1_31_694492901.dbf  1_41_694492901.dbf  1_51_694492901.dbf  1_61_694492901.dbf
1_32_694492901.dbf  1_42_694492901.dbf  1_52_694492901.dbf  1_62_694492901.dbf
1_33_694492901.dbf  1_43_694492901.dbf  1_53_694492901.dbf  1_63_694492901.dbf
1_34_694492901.dbf  1_44_694492901.dbf  1_54_694492901.dbf  1_64_694492901.dbf
1_35_694492901.dbf  1_45_694492901.dbf  1_55_694492901.dbf  1_65_694492901.dbf
1_36_694492901.dbf  1_46_694492901.dbf  1_56_694492901.dbf  1_66_694492901.dbf
1_37_694492901.dbf  1_47_694492901.dbf  1_57_694492901.dbf
1_38_694492901.dbf  1_48_694492901.dbf  1_58_694492901.dbf
1_39_694492901.dbf  1_49_694492901.dbf  1_59_694492901.dbf
[oracle@Oracledatabas ArchiveDest]$

i have backup of archive log as 

RMAN> list backup of archivelog all;


List of Backup Sets
===================

BS Key  Size       Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
3       136.49M    DISK        00:00:08     27-AUG-09
        BP Key: 3   Status: AVAILABLE  Compressed: NO  Tag: TAG20090827T061019
        Piece Name: /home/oracle/product/10.2.0/flash_recovery_area/NEO/backupset/2009_08_27/o1_mf_annnn_TAG20090827T061019_59dpwfkb_.bkp

  List of Archived Logs in backup set 3
  Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
  ---- ------- ---------- --------- ---------- ---------
  1    37      1530188    18-AUG-09 1549890    19-AUG-09
  1    38      1549890    19-AUG-09 1584124    19-AUG-09
  1    39      1584124    19-AUG-09 1628757    19-AUG-09

BS Key  Size       Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
7       181.96M    DISK        00:00:12     27-AUG-09
        BP Key: 7   Status: AVAILABLE  Compressed: NO  Tag: TAG20090827T222915
        Piece Name: /home/oracle/product/10.2.0/flash_recovery_area/NEO/backupset/2009_08_27/o1_mf_annnn_TAG20090827T222915_59gj7x0o_.bkp

  List of Archived Logs in backup set 7
  Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
  ---- ------- ---------- --------- ---------- ---------
  1    63      2413676    26-AUG-09 2435738    26-AUG-09
  1    64      2435738    26-AUG-09 2472234    27-AUG-09
  1    65      2472234    27-AUG-09 2515317    27-AUG-09
  1    66      2515317    27-AUG-09 2546805    27-AUG-09

BS Key  Size       Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
9       15.94M     DISK        00:00:02     28-AUG-09
        BP Key: 9   Status: AVAILABLE  Compressed: NO  Tag: TAG20090828T001745
        Piece Name: /home/oracle/product/10.2.0/flash_recovery_area/NEO/backupset/2009_08_28/o1_mf_annnn_TAG20090828T001745_59gpmc0s_.bkp

  List of Archived Logs in backup set 9
  Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
  ---- ------- ---------- --------- ---------- ---------
  1    30      1328116    17-AUG-09 1330698    17-AUG-09
  1    31      1330698    17-AUG-09 1343639    17-AUG-09

BS Key  Size       Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
11      104.87M    DISK        00:00:07     28-AUG-09
        BP Key: 11   Status: AVAILABLE  Compressed: NO  Tag: TAG20090828T012913
        Piece Name: /home/oracle/product/10.2.0/flash_recovery_area/NEO/backupset/2009_08_28/o1_mf_annnn_TAG20090828T012913_59gtsbdk_.bkp

  List of Archived Logs in backup set 11
  Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
  ---- ------- ---------- --------- ---------- ---------
  1    31      1330698    17-AUG-09 1343639    17-AUG-09
  1    32      1343639    17-AUG-09 1386340    17-AUG-09
  1    33      1386340    17-AUG-09 1418708    17-AUG-09

BS Key  Size       Device Type Elapsed Time Completion Time
------- ---------- ----------- ------------ ---------------
18      2.44G      DISK        00:03:18     17-SEP-09
        BP Key: 18   Status: AVAILABLE  Compressed: NO  Tag: TAG20090917T002120
        Piece Name: /home/oracle/product/10.2.0/flash_recovery_area/NEO/backupset/2009_09_17/o1_mf_annnn_TAG20090917T002120_5c3gb2m2_.bkp

  List of Archived Logs in backup set 18
  Thrd Seq     Low SCN    Low Time  Next SCN   Next Time
  ---- ------- ---------- --------- ---------- ---------
  1    67      2546805    27-AUG-09 2571963    28-AUG-09
  1    68      2571963    28-AUG-09 2610800    28-AUG-09
  1    69      2610800    28-AUG-09 2647832    28-AUG-09
  1    70      2647832    28-AUG-09 2668839    28-AUG-09
  1    71      2668839    28-AUG-09 2705408    29-AUG-09
  1    72      2705408    29-AUG-09 2749633    29-AUG-09
  1    73      2749633    29-AUG-09 2783675    30-AUG-09
  1    74      2783675    30-AUG-09 2826464    30-AUG-09
  1    75      2826464    30-AUG-09 2860499    30-AUG-09
  1    76      2860499    30-AUG-09 2903504    31-AUG-09
  1    77      2903504    31-AUG-09 2943108    31-AUG-09
  1    78      2943108    31-AUG-09 2977859    31-AUG-09
  1    79      2977859    31-AUG-09 2998785    01-SEP-09
  1    80      2998785    01-SEP-09 3042779    01-SEP-09
  1    81      3042779    01-SEP-09 3086898    01-SEP-09
  1    82      3086898    01-SEP-09 3103245    02-SEP-09
  1    83      3103245    02-SEP-09 3147628    02-SEP-09
  1    84      3147628    02-SEP-09 3192216    02-SEP-09
  1    85      3192216    02-SEP-09 3208480    02-SEP-09
  1    86      3208480    02-SEP-09 3248106    03-SEP-09
  1    87      3248106    03-SEP-09 3294064    03-SEP-09
  1    88      3294064    03-SEP-09 3323611    03-SEP-09
  1    89      3323611    03-SEP-09 3352060    04-SEP-09
  1    90      3352060    04-SEP-09 3399516    04-SEP-09
  1    91      3399516    04-SEP-09 3440740    04-SEP-09
  1    92      3440740    04-SEP-09 3457884    05-SEP-09
  1    93      3457884    05-SEP-09 3485157    05-SEP-09
  1    94      3485157    05-SEP-09 3523208    05-SEP-09
  1    95      3523208    05-SEP-09 3558325    05-SEP-09
  1    96      3558325    05-SEP-09 3600414    06-SEP-09
  1    97      3600414    06-SEP-09 3642729    06-SEP-09
  1    98      3642729    06-SEP-09 3678479    07-SEP-09
  1    99      3678479    07-SEP-09 3720642    07-SEP-09
  1    100     3720642    07-SEP-09 3748794    07-SEP-09
  1    101     3748794    07-SEP-09 3777963    08-SEP-09
  1    102     3777963    08-SEP-09 3823393    08-SEP-09
  1    103     3823393    08-SEP-09 3865230    08-SEP-09
  1    104     3865230    08-SEP-09 3880510    09-SEP-09
  1    105     3880510    09-SEP-09 3906888    09-SEP-09
  1    106     3906888    09-SEP-09 3961086    09-SEP-09
  1    107     3961086    09-SEP-09 3982103    10-SEP-09
  1    108     3982103    10-SEP-09 4034528    10-SEP-09
  1    109     4034528    10-SEP-09 4055556    11-SEP-09
  1    110     4055556    11-SEP-09 4115268    11-SEP-09
  1    111     4115268    11-SEP-09 4128557    12-SEP-09
  1    112     4128557    12-SEP-09 4165104    12-SEP-09
  1    113     4165104    12-SEP-09 4202850    12-SEP-09
  1    114     4202850    12-SEP-09 4258353    13-SEP-09
  1    115     4258353    13-SEP-09 4298900    14-SEP-09
  1    116     4298900    14-SEP-09 4341046    14-SEP-09
  1    117     4341046    14-SEP-09 4365180    15-SEP-09
  1    118     4365180    15-SEP-09 4424992    15-SEP-09
  1    119     4424992    15-SEP-09 4439538    15-SEP-09
  1    120     4439538    15-SEP-09 4489259    16-SEP-09
  1    121     4489259    16-SEP-09 4532807    16-SEP-09
  1    122     4532807    16-SEP-09 4548893    17-SEP-09



and when i try

RMAN> backup archivelog from sequence 30 until sequence 66;

Starting backup at 17-SEP-09
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 09/17/2009 04:01:25
RMAN-20242: specification does not match any archive log in the recovery catalog


when i try to restore database on testing server it ask me for



MAN> recover database until sequence 121;

Starting recover at 17-SEP-09
using channel ORA_DISK_1

starting media recovery

channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=37
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=38
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=39
channel ORA_DISK_1: reading from backup piece /home/oracle/o1_mf_annnn_TAG20090827T061019_59dpwfkb_.bkp
channel ORA_DISK_1: restored backup piece 1
piece handle=/home/oracle/o1_mf_annnn_TAG20090827T061019_59dpwfkb_.bkp tag=TAG20090827T061019
channel ORA_DISK_1: restore complete, elapsed time: 00:00:17
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=63
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=64
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=65
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=66
channel ORA_DISK_1: reading from backup piece /home/oracle/o1_mf_annnn_TAG20090827T222915_59gj7x0o_.bkp
channel ORA_DISK_1: restored backup piece 1
piece handle=/home/oracle/o1_mf_annnn_TAG20090827T222915_59gj7x0o_.bkp tag=TAG20090827T222915
channel ORA_DISK_1: restore complete, elapsed time: 00:00:15
channel ORA_DISK_1: starting archive log restore to default destination
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=31
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=32
channel ORA_DISK_1: restoring archive log
archive log thread=1 sequence=33
channel ORA_DISK_1: reading from backup piece /home/oracle/o1_mf_annnn_TAG20090828T012913_59gtsbdk_.bkp
channel ORA_DISK_1: restored backup piece 1
piece handle=/home/oracle/o1_mf_annnn_TAG20090828T012913_59gtsbdk_.bkp tag=TAG20090828T012913
channel ORA_DISK_1: restore complete, elapsed time: 00:00:07
archive log filename=/home/oracle/DataBaseBackups/ArchiveDest/1_31_694492901.dbf thread=1 sequence=31
archive log filename=/home/oracle/DataBaseBackups/ArchiveDest/1_32_694492901.dbf thread=1 sequence=32
archive log filename=/home/oracle/DataBaseBackups/ArchiveDest/1_33_694492901.dbf thread=1 sequence=33
archive log filename=/home/oracle/DataBaseBackups/ArchiveDest/1_34_694492901.dbf thread=1 sequence=34
archive log filename=/home/oracle/DataBaseBackups/ArchiveDest/1_34_694492901.dbf thread=1 sequence=35
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/17/2009 03:01:31
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/home/oracle/DataBaseBackups/ArchiveDest/1_34_694492901.dbf'
ORA-00310: archived log contains sequence 34; sequence 35 required
ORA-00334: archived log: '/home/oracle/DataBaseBackups/ArchiveDest/1_34_694492901.dbf'
    My question is why my 30 to 66 sequence archivelog file are not saved with the database in v$ archived_log and how to solve this problem.

    Thank you
    Umesh

    You may need to increase the CONTROL_FILE_RECORD_KEEP_TIME value.

    If the archivelogs are still on the disk, you can try to catalog them with:

    RMAN> catalog start with '/home/oracle/DataBaseBackups/ArchiveDest/;

    or if you don't need the file you can simply remove the o/s and run the following:

    RMAN> crosscheck archivelog all;
RMAN> delete expired archivelog all;

  • Update HTML files with nonstandard file extensions

    I use DW8/Mac to update my company's Web site. Recently, we have decided to make the site multilingual. To this end, our web server has been redesigned with multiple views. All the .html files have been renamed to. HTML.en and others. HTML.es files have been created for the Spanish version. And here, I came across a series of problems:

    (1) DW8 does not recognize files with. HTML.en &. HTML.es extensions to HTML. I scoured the Internet and found a solution for this one - I edited the /Configuration/DocumentTypes/MMDocumentTypes.xml file in the installation of DW to include new file extensions: .fr & .es. They now appear correctly coded by color in the editor of DW. Yes, Jose is more a problem, unless the DW gurus could direct me towards a better solution.

    (2) the real problem is this. Since I changed the file extensions for HTML files, the files are up to date is no longer automatically once I modified a DreamWeaver template file. I rebuilt the site cache - did not help. I tried "Edit-> Templates-> update Pages... ', this does not work either.

    I even tried to open a single page and make "Edit-> Templates-> apply a Page template", by checking the check against "Page updated when the template is changed" was present. Doing so change the page, but only once. Whenever I have change the model, this page does not change, because it is supposed to.

    Please advise!

    http://www.Macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_16410

    I'm not sure that this will help the problem of model, though.

    --
    Murray - ICQ 71997575
    Adobe Community Expert
    (If you * MUST * write me, don't don't LAUGH when you do!)
    ==================
    http://www.dreamweavermx-templates.com - template Triage!
    http://www.projectseven.com/go - DW FAQs, tutorials & resources
    http://www.dwfaq.com - DW FAQs, tutorials & resources
    http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
    ==================

    "oley-of-dragonia" wrote in message
    News:fe74ih$5ki$1@forums. Macromedia.com...
    > I use DW8/Mac to update my company's Web site. Recently, we have
    > decided to make the site multilingual. For this purpose our web server
    > was
    > upgraded to multiple views. All the .html files have been renamed to. HTML.en
    > and
    > additional. HTML.es files have been created for the Spanish version. And here I
    > ran
    > in a set of problems:
    >
    > 1) DW8 does not recognize files with. HTML.en &. HTML.es extensions as
    > HTML.
    > I've scoured the Internet and found a solution for this one - I've edited the
    > /Configuration/DocumentTypes/MMDocumentTypes.xml file within the DW
    > installation to include new file extensions: .fr & .es. They now appear
    > properly colour coded in the DW Editor. Yes, Jose is no longer a problem,
    > unless
    > DW gurus could direct me towards a better solution.
    >
    (> 2) the real problem is this. Since I changed file extensions
    > for
    > HTML files, the files are updated is no longer automatically once I modified a
    > DreamWeaver template file. I rebuilt the site cache - did not help. I tried
    > "Change-> them models-> update... Pages". ', this does not work either.
    >
    > I tried opening a single page and do "Edit-> models->.
    > Apply
    "> Model of Page ', ensuring that the check against"page update ".
    > When
    ' > changes to the model "was present. Then turn the page, but only
    > once.
    > Whenever I have change the model, this page does not change as it is supposed to
    > to.
    >
    > Please advise!
    >

  • How can I change the name of the file send and NOT to ViewAttachment the files to download?

    I started my Charter mail access via Firefox. The names of the attachments (Microsoft WORD, PowerPoint and .txt files) appear correctly. However, when I choose to download and save the attachment, the real name is changed to Viewattachment (n), where n is the number of download. I'm still on Windows XP, but will soon receive a new computer with Windows 7.

    MI_Mom wrote:

    My Content Disposition Header has the correct file name.

    Without a screenshot of him, no one can say if there is a site problem or a bug in Firefox.

Maybe you are looking for