"Do not remove" hooks on the built-in GPU port

Similar Questions

• HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

  HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks

  try to download the latest driver Package HP from Apple here:

  http://support.Apple.com/kb/DL907

  Install the package.

  Reset the printing system.  And add the printer with the new driver.

  Try to perform a "reset printing system" on the Macintosh and then reconnect to the printer.

  To reset the printing system do the following:

  1. open System Preferences
  2. click on Printers & Scanners
  3. right click or control click in the list box for the current print queues.
  4. Select the Reset printing system...
  5. enter admin user name and password
  6. restart the Macintosh
  7 try to set up the printer again

• I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not remove or add the program.

  I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not use, remove or add the program. How should I proceed?

  TIA,
  BWSwede

  Try to create a new profile.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

  What problems do you have that you want to reset Firefox?

  Firefox creates a new folder of old data of Firefox on the desktop?

  If reset you Firefox and a new profile is created and some of your data (bookmarks, passwords, cookies, form data) is automatically imported and your current profile will be moved on the desktop (old data of Firefox).

• Microsoft Digital Imaging Anniversary Edition-could not remove photos from the digital image library

  Microsoft Digital Imaging Anniversary Edition

  I have problems with digital imaging.  Never been wrong before, so I'm puzzled!  Recently added pix from CD to digital photo Image file picked up but did not display the photos on the page of digital image library - they come just under the icon standard w/o a view of the pix.  I tried to delete these files where the pix would not come to the top of the digital image.  Digital image would not remove them.  I deleted the pix of the computer files.  Digital image still would not remove the files in the library. I went into the Control Panel, I removed & reinstalled the Digital Image, but all files keep coming back.  Digital Imaging tells me I have 4000 photos stored there!  If I do, where are they?  I can't find them!   Is there something else I can do?

  I use Windows XP.  I've seen Info for Vista, but I need it for XP.

  I have problems with digital imaging.  Never been wrong before, so I'm puzzled!  Recently added pix from CD to digital photo Image file picked up but did not display the photos on the page of digital image library - they come just under the icon standard w/o a view of the pix.  I tried to delete these files where the pix would not come to the top of the digital image.  Digital image would not remove them.  I deleted the pix of the computer files.  Digital image still would not remove the files in the library. I went into the Control Panel, I removed & reinstalled the Digital Image, but all files keep coming back.  Digital Imaging tells me I have 4000 photos stored there!  If I do, where are they?  I can't find them!   Is there something else I can do?

  I use Windows XP.  I've seen Info for Vista, but I need it for XP.

  ========================================
  The MS Digital Image Library maintains a proprietary database
  named Pictures.pd3 who is not deleted when the program is
  uninstalled/reinstalled.

  If you rename Pictures.pd3 to Pictures.OLD... the next time you
  Open the library, it will be because it was the first opening.

  Windows XP... the Pictures.pd3 database file is located at:

  C:\Documents and Settings\.
  Local Settings\Application Data\Microsoft\
  POD\Pictures.Pd3

  If you can't find the file, open a file and
  Reach... Tools / Folder Options / View tab on...
  Tick... Display the hidden files and folders / apply / OK.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• can not remove or reset the VM machine - need serious help

  Hello

  I'm new to this forum.

  but I have a client Ubuntu 32 bit without VMware tools installed.

  It was only a test. but now I can not remove it.

  If I also GUI - an unexpected error was received from the ESX host turning off VM vm-27194.

  I can't reset, suspend or move either.

  If I try the SHH I get follwing results:

  ~ # vim - cmd vmsvc/power.on 42

  Switch on/off VM:

  Has no power on

  ~ # vim - cmd vmsvc/power.off 42

  Turn off the virtual machine:

  Failure of power off

  ~ # vim - cmd vmsvc/power.shutdown 42

  {(vim.fault.ToolsUnavailable)

  dynamicType = < unset >

  faultCause = (vmodl. NULL in MethodFault),

  MSG = "could not complete operation because in this machine virtual VMware Tools does not work."

  }

  ~ # vim - cmd vmsvc/power.reset 42

  Reset the virtual machine:

  Reset failed

  ~ # vim - cmd vmsvc/power.suspend 42

  Suspend the virtual machine:

  Suspend failed

  ~ #

  So what to do? Please help me out here

  I have now found a solution to my problem:

  Using the ESXi esxcli command to turn off a virtual machine

  The esxcli command can be used locally or remotely to turn off a virtual machine running on ESXi 5.x or later. For more information, see commands esxcli vm vSphere command-line Interface Reference.

  1. Open a console session where the esxcli is available, either in the shell of ESXi, vSphere Management Assistant (vMA) or where the vSphere command-line Interface (vCLI) is installed.
  2. The list of virtual classes, identified by world ID, UUID, display name and path to the .vmx configuration file by running this command:

     esxcli vm process list

  3. Turning off one of the virtual machines in the list by using this command:

     esxcli vm process kill --type= [soft,hard,force] --world-id= WorldNumber

     Notes:
     There are three ways of powering down. Soft is the most graceful, hard performing an immediate stop, and force should be used only as a last resort.

     Another power off of the syntax of the command is: esxcli vm process kill [ soft, hard, force] t w WorldNumber

  Repeat step 2 and confirm that the virtual machine is no longer running

  This is the green arrow disappear and I can now delete my virtual machine.

• Want desolde/resolder, remove and replace the two damaged usb2 ports

  I have a Sat A30 perfect by all means other than 2 USB2 ports on the back that are damaged (black plastic seperaters between connectors jumped) not quite sure why this happened because I was simply unplug the connected usb plugs on both occasions.

  The connectors were not especially tight. fault is I have no insulation between copper connectors which are still found in the slots and causes a short circuit, when I plug in a usb device.

  I bought a card mother relpacement (damaged) and usb2 connections are OK! Have good technician experience in carring out Soldering/desoldering and has all the tools. Problem is that I have not the slightest idea what connections under the Board of Directors are required to unsolder my damaged usb2 card in order to remove/swop and perform the necessary replacement.

  I'm sure I'll be advised to contact an authorized reseller of Tosh. I tried this and they say that they will be already only the motherboard together and the cost is horrible. I would rather make the repair myself that's not rocket science.

  The techies out there who could counsel with picture of the relevent pins to desoldering in order to remove and repair the fault would be greatly appreciated.

  E-mail: [email protected]

  If you can help in any way or point me in the right direction to go repair.

  I hope someone can help. Thank you very much
  Stewart

  Hello

  Please don't be crazy about me, but in my opinion, is not a very good idea to open the notebook alone if you don't have a lot of experience with it. Laptops are designed on the specific way and exchange of material is not so easy as the exchange of material to work stations.

  Believe me that a small error in the assembly/disassembly procedure can case damage to equipment or the façade of the same laptop parts. I know that there's not much service partner assistance because they want to do. It costs money, but you must understand that if they give that kind of advice or information they may close the shop very soon.

  You can try to do it alone, but at your own risk and be careful.

• 3 TB Canvio Stor.E not recognized correctly in the USB 3.0 port

  I have four of the HDWC130EK3J1 external Stor.E Canvio Desktop HDDs.
  If more than one USB 3.0 drive is connected the partitions are not recognized.

  The GPT partitions are displayed as MBR partition protection.
  The MBR partitions are displayed as never applied.

  The drive is detected correctly after that he was to reinsert and close ofd.
  At the same time, only 1-3 partitions are recognized correctly.
  This problem can be reproduced 8.1 running Win and Win 7 64 bit using two different computers, by using the USB Intel and Nec controller.

  Currently, BIOS, update driver update. The HDDs are checked to find errors.
  Is there an update to flash ready or a replacement for the external hard drive option?
  Please note that a replacement with the same model makes no sense.

  My German Embassy has been blocked so I translated it. Sorry the only translator Google

  There could be a simple answer to this problem:
  There are two standards different MBR and GPT partitions.

  MBR works with drives up to 2 TB in size, but it can record handle t with more than 2 TB of space. MBR also only supports up to four primary partitions if you want more, you have to do one of your primary partitions an extended partition and create logical partitions inside.

  GPT (GUID Partition Table) is a new standard which replaced the MBR. The TPG requires UEFI. This standard isn't limited like MBR and readers can be much larger and size limits depends on the system and its file systems. It allows an almost unlimited amount of partitions.

  I guess that the system cannot recognize the partitions (from additional external HDD) due to the limitation of the MBR.

• Port channel is not an option for the Destination RSPAN reflector Port

  Hello

  The trunk of our N3024 and N2048 is a channel port LAG (m 1).

  When you set the destination to distance type VLAN, it ask Destination Port of reflector which I guess must be the chest. 1 Q. Among the registered interfaces, in. interfaces are not an option.

  Why? How to proceed now?

  Thank you!

  I just checked and the switch will not let you set the destination to a vlan remote without going through a reflector port. The only thing I can think is to run another line between switches and use it as a reflector port. Or get rid of the channel port.

• Not able to use the built-in webcam

  I have a HP Pavilion dv6t - 6 c 00. I've upgraded to windows 7 ultimate which I had windows 7 Home premium that I could use the webcam, but now it displays an error when I open cyberlink youcam "warning, no webcam detected. Try connecting a webcam on your computer now. If you are using a built-in camera, make sure it is turned on." I looked and tried all the steps except the final step that the cyberlink youcam software does not allow me to click on the configuration settings. What should I do to activate my webcam?

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• What to do if symantec antivirus is not removed completely from the pc

  I have a symantec antivirus. what I try my best to remove pc., with all the usual ways. but I can't seem to do. what I do more than symantec antivirus remove it completely from the system.

  Hello

  Download and run the Norton removal tool.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=en&CT=us

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=kb20080710133834EN_EndUserProfile_en_us&product=home&PVID=f-home&version=1&LG=en&CT=us

  See you soon.

• Unregister a virtual machine does not remove it from the inventory?

  Hello

  When I cancel the registration of a machine virtual or even destroy with VirtualMachine.Unregister or VirtualMachine.Destroy, it doesn't go away inventory, instead, it becomes grey and straight with (orphans). How can I remove it completely?

  Thank you

  Shawn

  I've seen this happen when you have an ESX server managed by VC and connect directly to ESX to delete the virtual machine. VC is a bit special in that way.

  If this applies to you, you can directly remove from VC or maybe write a script that will clean up orphaned VMs from time to time.

• Saved passwords do not, remove after using the removal in the mode options/tools

  After clicking on delete, passwords disappear, but reappear when Options opens again.

  Yes! Deleted the file - thank you-

• Windows 7 not to pick up the IP address on port ethernet WNDR3400

  I just replaced a WNDR3400v3 with a new unit (same model) due to a breakdown of the old unit. The old unit worked very well with both Windows XP (SP3) and Win7 (SP1). My system is a dual-boot system, so the material is the same for each OS. My problem is that now Win7 will not get an IP address from the router. Windows XP still works well, as it always has.

  Any ideas?

  Remove all connections and then reconnect and choose home network

• Any possibility using only the built-in GPU?

  Mac OS X 10.11.6

  MacBook Pro(Retina,15 ",2015 mid)

  With graphics cards AMD one dedicated

  I wonder if it is possible to use only the GPU integrated while playing games. Cause I discovered that some games are no need to use the AMD GPU, but it is automatically switched to the dedicated GPU and drains the battery.

  Hope there is a solution for this problem. Thank you!

  It is somehow a conditional scenario suggested in this article

  on how to make some graphics settings may remain in service, here:

  • Set performance on MacBook Pro - Apple Support chart

  • MacBook Pro: how determine what GPU is in use - Apple Support

  {These links seem to show older versions of material your model}.

  Don't know if there is a way hidden within the system to change the default to

  stay on the one you want to be the first choice; Maybe in the command 'terminal '?

  In any case...

  Good luck in this case!

• Additions/removing applications from the dock

  Hello
  two little question.

  1. is it possible to add/remove applications from the docking station? I have pictures and it iTunes for some reason or another, and I did not really need them.

  2 is. a similar question, possible to uninstall some of the Apps such as Notes, reminders, game Center, etc., or if not remove them from the desktop computer?

  Thank you very much

  1, Yes, hold down one of the applications on the home screen or to dock the iPad and after a second or two, they should start to tremble; You can then drag apps on the dock and on him (if you currently have 6 apps on the dock, you have to drag a stop until you can put a different application on it); Press the home button when you are done so as to stop the shaking apps

  2, no, none of the built-in apps can be deleted. For applications you mentioned (Safari and apps store can be hidden through settings > General > Restrictions) you could move to your last home screen or put them on a page in a folder app to make them less visible.

  Organizing applications: https://help.apple.com/ipad/9/#/iPad997db08a

  Records of the App: https://help.apple.com/ipad/9/#/iPad997daa3f